Merge master.kernel.org:/home/rmk/linux-2.6-serial

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] 8250: add locking to console write function
  [SERIAL] Remove unconditional enable of TX irq for console
  [SERIAL] 8250: set divisor register correctly for AMD Alchemy SoC uart
  [SERIAL] AMD Alchemy UART: claim memory range
  [SERIAL] Clean up serial locking when obtaining a reference to a port

3 files changed, 121 insertions, 72 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 674b15c78f68..bbf78aaf9e01 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -362,6 +362,40 @@ serial_out(struct uart_8250_port *up, int offset, int value)
 #define serial_inp(up, offset)		serial_in(up, offset)
 #define serial_outp(up, offset, value)	serial_out(up, offset, value)
 
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct uart_8250_port *up)
+{
+	return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
+{
+	serial_outp(up, UART_DLL, value & 0xff);
+	serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+/* Au1x00 haven't got a standard divisor latch */
+static int serial_dl_read(struct uart_8250_port *up)
+{
+	if (up->port.iotype == UPIO_AU)
+		return __raw_readl(up->port.membase + 0x28);
+	else
+		return _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+	if (up->port.iotype == UPIO_AU)
+		__raw_writel(value, up->port.membase + 0x28);
+	else
+		_serial_dl_write(up, value);
+}
+#else
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+#endif
 
 /*
  * For the 16C950
@@ -494,7 +528,8 @@ static void disable_rsa(struct uart_8250_port *up)
  */
 static int size_fifo(struct uart_8250_port *up)
 {
-	unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr;
+	unsigned char old_fcr, old_mcr, old_lcr;
+	unsigned short old_dl;
 	int count;
 
 	old_lcr = serial_inp(up, UART_LCR);
@@ -505,10 +540,8 @@ static int size_fifo(struct uart_8250_port *up)
 		    UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 	serial_outp(up, UART_MCR, UART_MCR_LOOP);
 	serial_outp(up, UART_LCR, UART_LCR_DLAB);
-	old_dll = serial_inp(up, UART_DLL);
-	old_dlm = serial_inp(up, UART_DLM);
-	serial_outp(up, UART_DLL, 0x01);
-	serial_outp(up, UART_DLM, 0x00);
+	old_dl = serial_dl_read(up);
+	serial_dl_write(up, 0x0001);
 	serial_outp(up, UART_LCR, 0x03);
 	for (count = 0; count < 256; count++)
 		serial_outp(up, UART_TX, count);
@@ -519,8 +552,7 @@ static int size_fifo(struct uart_8250_port *up)
 	serial_outp(up, UART_FCR, old_fcr);
 	serial_outp(up, UART_MCR, old_mcr);
 	serial_outp(up, UART_LCR, UART_LCR_DLAB);
-	serial_outp(up, UART_DLL, old_dll);
-	serial_outp(up, UART_DLM, old_dlm);
+	serial_dl_write(up, old_dl);
 	serial_outp(up, UART_LCR, old_lcr);
 
 	return count;
@@ -750,8 +782,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 
 			serial_outp(up, UART_LCR, 0xE0);
 
-			quot = serial_inp(up, UART_DLM) << 8;
-			quot += serial_inp(up, UART_DLL);
+			quot = serial_dl_read(up);
 			quot <<= 3;
 
 			status1 = serial_in(up, 0x04); /* EXCR1 */
@@ -759,8 +790,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
 			serial_outp(up, 0x04, status1);
 			
-			serial_outp(up, UART_DLL, quot & 0xff);
-			serial_outp(up, UART_DLM, quot >> 8);
+			serial_dl_write(up, quot);
 
 			serial_outp(up, UART_LCR, 0);
 
@@ -1862,8 +1892,7 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
 		serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
 	}
 
-	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */
-	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */
+	serial_dl_write(up, quot);
 
 	/*
 	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
@@ -1906,6 +1935,9 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	int ret = 0;
 
 	switch (up->port.iotype) {
+	case UPIO_AU:
+		size = 0x100000;
+		/* fall thru */
 	case UPIO_MEM:
 		if (!up->port.mapbase)
 			break;
@@ -1938,6 +1970,9 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
 	unsigned int size = 8 << up->port.regshift;
 
 	switch (up->port.iotype) {
+	case UPIO_AU:
+		size = 0x100000;
+		/* fall thru */
 	case UPIO_MEM:
 		if (!up->port.mapbase)
 			break;
@@ -2200,10 +2235,17 @@ static void
 serial8250_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct uart_8250_port *up = &serial8250_ports[co->index];
+	unsigned long flags;
 	unsigned int ier;
+	int locked = 1;
 
 	touch_nmi_watchdog();
 
+	if (oops_in_progress) {
+		locked = spin_trylock_irqsave(&up->port.lock, flags);
+	} else
+		spin_lock_irqsave(&up->port.lock, flags);
+
 	/*
 	 *	First save the IER then disable the interrupts
 	 */
@@ -2221,8 +2263,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	 *	and restore the IER
 	 */
 	wait_for_xmitr(up, BOTH_EMPTY);
-	up->ier |= UART_IER_THRI;
-	serial_out(up, UART_IER, ier | UART_IER_THRI);
+	serial_out(up, UART_IER, ier);
+
+	if (locked)
+		spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
index 3d1bfd07208d..58015fd14be9 100644
--- a/drivers/serial/8250_au1x00.c
+++ b/drivers/serial/8250_au1x00.c
@@ -30,13 +30,12 @@
 	{						\
 		.iobase		= _base,		\
 		.membase	= (void __iomem *)_base,\
-		.mapbase	= _base,		\
+		.mapbase	= CPHYSADDR(_base),	\
 		.irq		= _irq,			\
 		.uartclk	= 0,	/* filled */	\
 		.regshift	= 2,			\
 		.iotype		= UPIO_AU,		\
-		.flags		= UPF_SKIP_TEST | 	\
-				  UPF_IOREMAP,		\
+		.flags		= UPF_SKIP_TEST 	\
 	}
 
 static struct plat_serial8250_port au1x00_data[] = {
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index fcd7744c4253..aeb8153ccf24 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1500,20 +1500,18 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 static struct uart_state *uart_get(struct uart_driver *drv, int line)
 {
 	struct uart_state *state;
+	int ret = 0;
 
-	mutex_lock(&port_mutex);
 	state = drv->state + line;
 	if (mutex_lock_interruptible(&state->mutex)) {
-		state = ERR_PTR(-ERESTARTSYS);
-		goto out;
+		ret = -ERESTARTSYS;
+		goto err;
 	}
 
 	state->count++;
-	if (!state->port) {
-		state->count--;
-		mutex_unlock(&state->mutex);
-		state = ERR_PTR(-ENXIO);
-		goto out;
+	if (!state->port || state->port->flags & UPF_DEAD) {
+		ret = -ENXIO;
+		goto err_unlock;
 	}
 
 	if (!state->info) {
@@ -1531,15 +1529,17 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 			tasklet_init(&state->info->tlet, uart_tasklet_action,
 				     (unsigned long)state);
 		} else {
-			state->count--;
-			mutex_unlock(&state->mutex);
-			state = ERR_PTR(-ENOMEM);
+			ret = -ENOMEM;
+			goto err_unlock;
 		}
 	}
-
- out:
-	mutex_unlock(&port_mutex);
 	return state;
+
+ err_unlock:
+	state->count--;
+	mutex_unlock(&state->mutex);
+ err:
+	return ERR_PTR(ret);
 }
 
 /*
@@ -2085,45 +2085,6 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 	}
 }
 
-/*
- * This reverses the effects of uart_configure_port, hanging up the
- * port before removal.
- */
-static void
-uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state)
-{
-	struct uart_port *port = state->port;
-	struct uart_info *info = state->info;
-
-	if (info && info->tty)
-		tty_vhangup(info->tty);
-
-	mutex_lock(&state->mutex);
-
-	state->info = NULL;
-
-	/*
-	 * Free the port IO and memory resources, if any.
-	 */
-	if (port->type != PORT_UNKNOWN)
-		port->ops->release_port(port);
-
-	/*
-	 * Indicate that there isn't a port here anymore.
-	 */
-	port->type = PORT_UNKNOWN;
-
-	/*
-	 * Kill the tasklet, and free resources.
-	 */
-	if (info) {
-		tasklet_kill(&info->tlet);
-		kfree(info);
-	}
-
-	mutex_unlock(&state->mutex);
-}
-
 static struct tty_operations uart_ops = {
 	.open		= uart_open,
 	.close		= uart_close,
@@ -2270,6 +2231,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	state = drv->state + port->line;
 
 	mutex_lock(&port_mutex);
+	mutex_lock(&state->mutex);
 	if (state->port) {
 		ret = -EINVAL;
 		goto out;
@@ -2304,7 +2266,13 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	    port->cons && !(port->cons->flags & CON_ENABLED))
 		register_console(port->cons);
 
+	/*
+	 * Ensure UPF_DEAD is not set.
+	 */
+	port->flags &= ~UPF_DEAD;
+
  out:
+	mutex_unlock(&state->mutex);
 	mutex_unlock(&port_mutex);
 
 	return ret;
@@ -2322,6 +2290,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 {
 	struct uart_state *state = drv->state + port->line;
+	struct uart_info *info;
 
 	BUG_ON(in_interrupt());
 
@@ -2332,11 +2301,48 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 	mutex_lock(&port_mutex);
 
 	/*
+	 * Mark the port "dead" - this prevents any opens from
+	 * succeeding while we shut down the port.
+	 */
+	mutex_lock(&state->mutex);
+	port->flags |= UPF_DEAD;
+	mutex_unlock(&state->mutex);
+
+	/*
 	 * Remove the devices from devfs
 	 */
 	tty_unregister_device(drv->tty_driver, port->line);
 
-	uart_unconfigure_port(drv, state);
+	info = state->info;
+	if (info && info->tty)
+		tty_vhangup(info->tty);
+
+	/*
+	 * All users of this port should now be disconnected from
+	 * this driver, and the port shut down.  We should be the
+	 * only thread fiddling with this port from now on.
+	 */
+	state->info = NULL;
+
+	/*
+	 * Free the port IO and memory resources, if any.
+	 */
+	if (port->type != PORT_UNKNOWN)
+		port->ops->release_port(port);
+
+	/*
+	 * Indicate that there isn't a port here anymore.
+	 */
+	port->type = PORT_UNKNOWN;
+
+	/*
+	 * Kill the tasklet, and free resources.
+	 */
+	if (info) {
+		tasklet_kill(&info->tlet);
+		kfree(info);
+	}
+
 	state->port = NULL;
 	mutex_unlock(&port_mutex);