summaryrefslogtreecommitdiff
path: root/drivers/serial/8250_hp300.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/8250_hp300.c
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/8250_hp300.c')
-rw-r--r--drivers/serial/8250_hp300.c329
1 files changed, 329 insertions, 0 deletions
diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c
new file mode 100644
index 000000000000..b8d51eb56bff
--- /dev/null
+++ b/drivers/serial/8250_hp300.c
@@ -0,0 +1,329 @@
+/*
+ * Driver for the 98626/98644/internal serial interface on hp300/hp400
+ * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs)
+ *
+ * Ported from 2.2 and modified to use the normal 8250 driver
+ * by Kars de Jong <jongk@linux-m68k.org>, May 2004.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_core.h>
+#include <linux/delay.h>
+#include <linux/dio.h>
+#include <linux/console.h>
+#include <asm/io.h>
+
+#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI)
+#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure?
+#endif
+
+#ifdef CONFIG_HPAPCI
+struct hp300_port
+{
+ struct hp300_port *next; /* next port */
+ int line; /* line (tty) number */
+};
+
+static struct hp300_port *hp300_ports;
+#endif
+
+#ifdef CONFIG_HPDCA
+
+static int __devinit hpdca_init_one(struct dio_dev *d,
+ const struct dio_device_id *ent);
+static void __devexit hpdca_remove_one(struct dio_dev *d);
+
+static struct dio_device_id hpdca_dio_tbl[] = {
+ { DIO_ID_DCA0 },
+ { DIO_ID_DCA0REM },
+ { DIO_ID_DCA1 },
+ { DIO_ID_DCA1REM },
+ { 0 }
+};
+
+static struct dio_driver hpdca_driver = {
+ .name = "hpdca",
+ .id_table = hpdca_dio_tbl,
+ .probe = hpdca_init_one,
+ .remove = __devexit_p(hpdca_remove_one),
+};
+
+#endif
+
+extern int hp300_uart_scode;
+
+/* Offset to UART registers from base of DCA */
+#define UART_OFFSET 17
+
+#define DCA_ID 0x01 /* ID (read), reset (write) */
+#define DCA_IC 0x03 /* Interrupt control */
+
+/* Interrupt control */
+#define DCA_IC_IE 0x80 /* Master interrupt enable */
+
+#define HPDCA_BAUD_BASE 153600
+
+/* Base address of the Frodo part */
+#define FRODO_BASE (0x41c000)
+
+/*
+ * Where we find the 8250-like APCI ports, and how far apart they are.
+ */
+#define FRODO_APCIBASE 0x0
+#define FRODO_APCISPACE 0x20
+#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE))
+
+#define HPAPCI_BAUD_BASE 500400
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+/*
+ * Parse the bootinfo to find descriptions for headless console and
+ * debug serial ports and register them with the 8250 driver.
+ * This function should be called before serial_console_init() is called
+ * to make sure the serial console will be available for use. IA-64 kernel
+ * calls this function from setup_arch() after the EFI and ACPI tables have
+ * been parsed.
+ */
+int __init hp300_setup_serial_console(void)
+{
+ int scode;
+ struct uart_port port;
+
+ memset(&port, 0, sizeof(port));
+
+ if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX)
+ return 0;
+
+ if (DIO_SCINHOLE(hp300_uart_scode))
+ return 0;
+
+ scode = hp300_uart_scode;
+
+ /* Memory mapped I/O */
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ port.type = PORT_UNKNOWN;
+
+ /* Check for APCI console */
+ if (scode == 256) {
+#ifdef CONFIG_HPAPCI
+ printk(KERN_INFO "Serial console is HP APCI 1\n");
+
+ port.uartclk = HPAPCI_BAUD_BASE * 16;
+ port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1));
+ port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
+ port.regshift = 2;
+ add_preferred_console("ttyS", port.line, "9600n8");
+#else
+ printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
+ return 0;
+#endif
+ }
+ else {
+#ifdef CONFIG_HPDCA
+ unsigned long pa = dio_scodetophysaddr(scode);
+ if (!pa) {
+ return 0;
+ }
+
+ printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
+
+ port.uartclk = HPDCA_BAUD_BASE * 16;
+ port.mapbase = (pa + UART_OFFSET);
+ port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
+ port.regshift = 1;
+ port.irq = DIO_IPL(pa + DIO_VIRADDRBASE);
+
+ /* Enable board-interrupts */
+ out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
+
+ if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) {
+ add_preferred_console("ttyS", port.line, "9600n8");
+ }
+#else
+ printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
+ return 0;
+#endif
+ }
+
+ if (early_serial_setup(&port) < 0) {
+ printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
+ }
+
+ return 0;
+}
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+
+#ifdef CONFIG_HPDCA
+static int __devinit hpdca_init_one(struct dio_dev *d,
+ const struct dio_device_id *ent)
+{
+ struct serial_struct serial_req;
+ int line;
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ if (hp300_uart_scode == d->scode) {
+ /* Already got it. */
+ return 0;
+ }
+#endif
+ memset(&serial_req, 0, sizeof(struct serial_struct));
+
+ /* Memory mapped I/O */
+ serial_req.io_type = SERIAL_IO_MEM;
+ serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ serial_req.irq = d->ipl;
+ serial_req.baud_base = HPDCA_BAUD_BASE;
+ serial_req.iomap_base = (d->resource.start + UART_OFFSET);
+ serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE);
+ serial_req.iomem_reg_shift = 1;
+ line = register_serial(&serial_req);
+
+ if (line < 0) {
+ printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
+ " irq %d failed\n", d->scode, serial_req.irq);
+ return -ENOMEM;
+ }
+
+ /* Enable board-interrupts */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
+ dio_set_drvdata(d, (void *)line);
+
+ /* Reset the DCA */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff);
+ udelay(100);
+
+ return 0;
+}
+#endif
+
+static int __init hp300_8250_init(void)
+{
+ static int called = 0;
+ int num_ports;
+#ifdef CONFIG_HPAPCI
+ int line;
+ unsigned long base;
+ struct serial_struct serial_req;
+ struct hp300_port *port;
+ int i;
+#endif
+ if (called)
+ return -ENODEV;
+ called = 1;
+
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+
+ num_ports = 0;
+
+#ifdef CONFIG_HPDCA
+ if (dio_module_init(&hpdca_driver) == 0)
+ num_ports++;
+#endif
+#ifdef CONFIG_HPAPCI
+ if (hp300_model < HP_400) {
+ if (!num_ports)
+ return -ENODEV;
+ return 0;
+ }
+ /* These models have the Frodo chip.
+ * Port 0 is reserved for the Apollo Domain keyboard.
+ * Port 1 is either the console or the DCA.
+ */
+ for (i = 1; i < 4; i++) {
+ /* Port 1 is the console on a 425e, on other machines it's mapped to
+ * DCA.
+ */
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ if (i == 1) {
+ continue;
+ }
+#endif
+
+ /* Create new serial device */
+ port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+
+ memset(&serial_req, 0, sizeof(struct serial_struct));
+
+ base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
+
+ /* Memory mapped I/O */
+ serial_req.io_type = SERIAL_IO_MEM;
+ serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ /* XXX - no interrupt support yet */
+ serial_req.irq = 0;
+ serial_req.baud_base = HPAPCI_BAUD_BASE;
+ serial_req.iomap_base = base;
+ serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE);
+ serial_req.iomem_reg_shift = 2;
+
+ line = register_serial(&serial_req);
+
+ if (line < 0) {
+ printk(KERN_NOTICE "8250_hp300: register_serial() APCI %d"
+ " irq %d failed\n", i, serial_req.irq);
+ kfree(port);
+ continue;
+ }
+
+ port->line = line;
+ port->next = hp300_ports;
+ hp300_ports = port;
+
+ num_ports++;
+ }
+#endif
+
+ /* Any boards found? */
+ if (!num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
+#ifdef CONFIG_HPDCA
+static void __devexit hpdca_remove_one(struct dio_dev *d)
+{
+ int line;
+
+ line = (int) dio_get_drvdata(d);
+ if (d->resource.start) {
+ /* Disable board-interrupts */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0);
+ }
+ unregister_serial(line);
+}
+#endif
+
+static void __exit hp300_8250_exit(void)
+{
+#ifdef CONFIG_HPAPCI
+ struct hp300_port *port, *to_free;
+
+ for (port = hp300_ports; port; ) {
+ unregister_serial(port->line);
+ to_free = port;
+ port = port->next;
+ kfree(to_free);
+ }
+
+ hp300_ports = NULL;
+#endif
+#ifdef CONFIG_HPDCA
+ dio_unregister_driver(&hpdca_driver);
+#endif
+}
+
+module_init(hp300_8250_init);
+module_exit(hp300_8250_exit);
+MODULE_DESCRIPTION("HP DCA/APCI serial driver");
+MODULE_AUTHOR("Kars de Jong <jongk@linux-m68k.org>");
+MODULE_LICENSE("GPL");