scsi: mpt3sas: Update MPI headers to support Aero controllers

Updating MPI headers to the latest version 2.6.7 to add support to the
driver to detect the new 3816 and 3916 chip based controllers.  Separate
out firmware image data from mpi2_ioc.h to new file mpi2_image.h

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 68 insertions, 26 deletions

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 5122920a961a..398fa6fde960 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -1,13 +1,13 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * Copyright 2000-2015 Avago Technologies.  All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
  *
  *
  *          Name:  mpi2_cnfg.h
  *         Title:  MPI Configuration messages and pages
  * Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.42
+ *    mpi2_cnfg.h Version:  02.00.46
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -231,6 +231,18 @@
  *                     Added NOIOB field to PCIe Device Page 2.
  *                     Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to
  *                     the Capabilities field of PCIe Device Page 2.
+ * 07-22-18  02.00.43  Added defines for SAS3916 and SAS3816.
+ *                     Added WRiteCache defines to IO Unit Page 1.
+ *                     Added MaxEnclosureLevel to BIOS Page 1.
+ *                     Added OEMRD to SAS Enclosure Page 1.
+ *                     Added DMDReportPCIe to PCIe IO Unit Page 1.
+ *                     Added Flags field and flags for Retimers to
+ *                     PCIe Switch Page 1.
+ * 08-02-18  02.00.44  Added Slotx2, Slotx4 to ManPage 7.
+ * 08-15-18  02.00.45  Added ProductSpecific field at end of IOC Page 1
+ * 08-28-18  02.00.46  Added NVMs Write Cache flag to IOUnitPage1
+ *                     Added DMDReport Delay Time defines to
+ *                     PCIeIOUnitPage1
  * --------------------------------------------------------------------------
  */
 
@@ -568,8 +580,17 @@ typedef struct _MPI2_CONFIG_REPLY {
 #define MPI26_MFGPAGE_DEVID_SAS3616                 (0x00D1)
 #define MPI26_MFGPAGE_DEVID_SAS3708                 (0x00D2)
 
-#define MPI26_MFGPAGE_DEVID_SAS3816                 (0x00A1)
-#define MPI26_MFGPAGE_DEVID_SAS3916                 (0x00A0)
+#define MPI26_MFGPAGE_DEVID_SEC_MASK_3916           (0x0003)
+#define MPI26_MFGPAGE_DEVID_INVALID0_3916           (0x00E0)
+#define MPI26_MFGPAGE_DEVID_CFG_SEC_3916            (0x00E1)
+#define MPI26_MFGPAGE_DEVID_HARD_SEC_3916           (0x00E2)
+#define MPI26_MFGPAGE_DEVID_INVALID1_3916           (0x00E3)
+
+#define MPI26_MFGPAGE_DEVID_SEC_MASK_3816           (0x0003)
+#define MPI26_MFGPAGE_DEVID_INVALID0_3816           (0x00E4)
+#define MPI26_MFGPAGE_DEVID_CFG_SEC_3816            (0x00E5)
+#define MPI26_MFGPAGE_DEVID_HARD_SEC_3816           (0x00E6)
+#define MPI26_MFGPAGE_DEVID_INVALID1_3816           (0x00E7)
 
 
 /*Manufacturing Page 0 */
@@ -932,7 +953,11 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
 
 #define MPI2_IOUNITPAGE1_PAGEVERSION                    (0x04)
 
-/*IO Unit Page 1 Flags defines */
+/* IO Unit Page 1 Flags defines */
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_MASK             (0x00030000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_ENABLE           (0x00000000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_DISABLE          (0x00010000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_NO_CHANGE        (0x00020000)
 #define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK       (0x00004000)
 #define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE  (0x00002000)
 #define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH             (0x00001000)
@@ -1511,7 +1536,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
 	U32                     BiosOptions;                /*0x04 */
 	U32                     IOCSettings;                /*0x08 */
 	U8                      SSUTimeout;                 /*0x0C */
-	U8                      Reserved1;                  /*0x0D */
+	U8                      MaxEnclosureLevel;          /*0x0D */
 	U16                     Reserved2;                  /*0x0E */
 	U32                     DeviceSettings;             /*0x10 */
 	U16                     NumberOfDevices;            /*0x14 */
@@ -1531,7 +1556,6 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
 #define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG                  (0x00004000)
 
 #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK                         (0x00003800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK                         (0x00003800)
 #define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL                        (0x00000000)
 #define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE                   (0x00000800)
 #define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID                        (0x00001000)
@@ -3271,10 +3295,12 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
 	U16	NumSlots;			/*0x18 */
 	U16	StartSlot;			/*0x1A */
 	U8	ChassisSlot;			/*0x1C */
-	U8	EnclosureLeve;			/*0x1D */
+	U8	EnclosureLevel;			/*0x1D */
 	U16	SEPDevHandle;			/*0x1E */
-	U32	Reserved3;			/*0x20 */
-	U32	Reserved4;			/*0x24 */
+	U8	OEMRD;				/*0x20 */
+	U8	Reserved1a;			/*0x21 */
+	U16	Reserved2;			/*0x22 */
+	U32	Reserved3;			/*0x24 */
 } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
 	*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
 	Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
@@ -3285,6 +3311,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
 #define MPI2_SASENCLOSURE0_PAGEVERSION      (0x04)
 
 /*values for SAS Enclosure Page 0 Flags field */
+#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_VALID          (0x0080)
+#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_COLLECTING     (0x0040)
 #define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID    (0x0020)
 #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID      (0x0010)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
@@ -3298,6 +3326,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
 #define MPI26_ENCLOSURE0_PAGEVERSION        (0x04)
 
 /*Values for Enclosure Page 0 Flags field */
+#define MPI26_ENCLS0_FLAGS_OEMRD_VALID              (0x0080)
+#define MPI26_ENCLS0_FLAGS_OEMRD_COLLECTING         (0x0040)
 #define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID       (0x0020)
 #define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID         (0x0010)
 #define MPI26_ENCLS0_FLAGS_MNG_MASK                 (0x000F)
@@ -3696,8 +3726,9 @@ typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
 	Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
 
 /*values for LinkFlags */
-#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS    (0x00)
-#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS     (0x01)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK     (0x00)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN                 (0x01)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN                 (0x02)
 
 /*
  *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
@@ -3714,7 +3745,7 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
 	U16	AdditionalControlFlags;             /*0x0C */
 	U16	NVMeMaxQueueDepth;                  /*0x0E */
 	U8	NumPhys;                            /*0x10 */
-	U8	Reserved1;                          /*0x11 */
+	U8	DMDReportPCIe;                      /*0x11 */
 	U16	Reserved2;                          /*0x12 */
 	MPI26_PCIE_IO_UNIT1_PHY_DATA
 		PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
@@ -3736,6 +3767,12 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
 #define MPI26_PCIEIOUNIT1_MAX_RATE_8_0                              (0x40)
 #define MPI26_PCIEIOUNIT1_MAX_RATE_16_0                             (0x50)
 
+/*values for PCIe IO Unit Page 1 DMDReportPCIe */
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_MASK                          (0x80)
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_1_SEC                         (0x00)
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_16_SEC                        (0x80)
+#define MPI26_PCIEIOUNIT1_DMDRPT_DELAY_TIME_MASK                    (0x7F)
+
 /*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
  *values
  */
@@ -3788,6 +3825,9 @@ typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
 
 /*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
 
+/* defines for the Flags field */
+#define MPI26_PCIESWITCH1_2_RETIMER_PRESENCE         (0x0002)
+#define MPI26_PCIESWITCH1_RETIMER_PRESENCE           (0x0001)
 
 /****************************************************************************
 *  PCIe Device Config Pages (MPI v2.6 and later)
@@ -3849,19 +3889,21 @@ typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
  *field
  */
 
-/*values for PCIe Device Page 0 Flags field */
-#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE            (0x8000)
-#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH              (0x4000)
-#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE              (0x2000)
-#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION      (0x0400)
-#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION            (0x0200)
-#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE             (0x0100)
-#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED        (0x0080)
-#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED            (0x0040)
-#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED              (0x0020)
-#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED              (0x0010)
-#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID               (0x0002)
-#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT                 (0x0001)
+/*values for PCIe Device Page 0 Flags field*/
+#define MPI26_PCIEDEV0_FLAGS_2_RETIMER_PRESENCE             (0x00020000)
+#define MPI26_PCIEDEV0_FLAGS_RETIMER_PRESENCE               (0x00010000)
+#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE            (0x00008000)
+#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH              (0x00004000)
+#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE              (0x00002000)
+#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION      (0x00000400)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION            (0x00000200)
+#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE             (0x00000100)
+#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED        (0x00000080)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED            (0x00000040)
+#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED              (0x00000020)
+#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED              (0x00000010)
+#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID               (0x00000002)
+#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT                 (0x00000001)
 
 /* values for PCIe Device Page 0 SupportedLinkRates field */
 #define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED             (0x08)