[SCSI] lpfc 8.3.28: Miscellaneous fixes in sysfs and mgmt interfaces

Miscellaneous fixes in sysfs and mgmt interfaces:

- Added SLI4 INTF_TYPE and SLI_FAMILY as sub-field to the fwrev sysfs
  attribute (CR 124103)
- Added a sysfs attribute "protocol" to report SLI4 port link protocol
  type (CR 124102)
- Increment mix-and-match minor number by 1 for added "protocol" sysfs
  attribute. (124102)
- Move the link speed check into the generic sli3/sli4 code
  path. (CR 124185, 124122)
- Deleted check for inExtWLen (CR 122523)
- Add the word "offline" to message 2889 (CR 124385)
- Conditionalize the firmware upgrade/downgrade so that it is only
  attempted for SLI4 type 2 boards (CR 124406)
- Return an error if the mbox sysfs is called. (CR 124210)
- When port_state is less than LPFC_VPORT_READY, report
  FC_PORTSTATE_BYPASSED (CR 120018)
- Added driver support for performing persistent linkdown based on
  configure region 23 (CR 124534)
- Added restore state and error log when sysfs board_mode attribute
  access failed (CR 124158)
- Added support for SLI4_CONFIG non-embedded COMN_GET_CNTL_ADDL_ATTR
  pass-through (CR 124466)
- Rejecting un-supported multi-buffer mailbox commands (CR 124771)
- Byte swap the extended data request and response data for extended
  mailbox data (CR 125081)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 128 insertions, 285 deletions

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index d0ebaeb7ef60..7bf492e156d9 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -351,10 +351,23 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,
 	struct Scsi_Host  *shost = class_to_shost(dev);
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
+	uint32_t if_type;
+	uint8_t sli_family;
 	char fwrev[32];
+	int len;
 
 	lpfc_decode_firmware_rev(phba, fwrev, 1);
-	return snprintf(buf, PAGE_SIZE, "%s, sli-%d\n", fwrev, phba->sli_rev);
+	if_type = phba->sli4_hba.pc_sli4_params.if_type;
+	sli_family = phba->sli4_hba.pc_sli4_params.sli_family;
+
+	if (phba->sli_rev < LPFC_SLI_REV4)
+		len = snprintf(buf, PAGE_SIZE, "%s, sli-%d\n",
+			       fwrev, phba->sli_rev);
+	else
+		len = snprintf(buf, PAGE_SIZE, "%s, sli-%d:%d:%x\n",
+			       fwrev, phba->sli_rev, if_type, sli_family);
+
+	return len;
 }
 
 /**
@@ -488,6 +501,34 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
+ * lpfc_sli4_protocol_show - Return the fip mode of the HBA
+ * @dev: class unused variable.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the module description text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_sli4_protocol_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba *phba = vport->phba;
+
+	if (phba->sli_rev < LPFC_SLI_REV4)
+		return snprintf(buf, PAGE_SIZE, "fc\n");
+
+	if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL) {
+		if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_GE)
+			return snprintf(buf, PAGE_SIZE, "fcoe\n");
+		if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC)
+			return snprintf(buf, PAGE_SIZE, "fc\n");
+	}
+	return snprintf(buf, PAGE_SIZE, "unknown\n");
+}
+
+/**
  * lpfc_link_state_store - Transition the link_state on an HBA port
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
@@ -773,7 +814,12 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
  * the readyness after performing a firmware reset.
  *
  * Returns:
- * zero for success
+ * zero for success, -EPERM when port does not have privilage to perform the
+ * reset, -EIO when port timeout from recovering from the reset.
+ *
+ * Note:
+ * As the caller will interpret the return code by value, be careful in making
+ * change or addition to return codes.
  **/
 int
 lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)
@@ -826,9 +872,11 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 {
 	struct completion online_compl;
 	struct pci_dev *pdev = phba->pcidev;
+	uint32_t before_fc_flag;
+	uint32_t sriov_nr_virtfn;
 	uint32_t reg_val;
-	int status = 0;
-	int rc;
+	int status = 0, rc = 0;
+	int job_posted = 1, sriov_err;
 
 	if (!phba->cfg_enable_hba_reset)
 		return -EACCES;
@@ -838,6 +886,10 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 	     LPFC_SLI_INTF_IF_TYPE_2))
 		return -EPERM;
 
+	/* Keep state if we need to restore back */
+	before_fc_flag = phba->pport->fc_flag;
+	sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn;
+
 	/* Disable SR-IOV virtual functions if enabled */
 	if (phba->cfg_sriov_nr_virtfn) {
 		pci_disable_sriov(pdev);
@@ -869,21 +921,44 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 	/* delay driver action following IF_TYPE_2 reset */
 	rc = lpfc_sli4_pdev_status_reg_wait(phba);
 
-	if (rc)
+	if (rc == -EPERM) {
+		/* no privilage for reset, restore if needed */
+		if (before_fc_flag & FC_OFFLINE_MODE)
+			goto out;
+	} else if (rc == -EIO) {
+		/* reset failed, there is nothing more we can do */
 		return rc;
+	}
+
+	/* keep the original port state */
+	if (before_fc_flag & FC_OFFLINE_MODE)
+		goto out;
 
 	init_completion(&online_compl);
-	rc = lpfc_workq_post_event(phba, &status, &online_compl,
-				   LPFC_EVT_ONLINE);
-	if (rc == 0)
-		return -ENOMEM;
+	job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
+					   LPFC_EVT_ONLINE);
+	if (!job_posted)
+		goto out;
 
 	wait_for_completion(&online_compl);
 
-	if (status != 0)
-		return -EIO;
+out:
+	/* in any case, restore the virtual functions enabled as before */
+	if (sriov_nr_virtfn) {
+		sriov_err =
+			lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn);
+		if (!sriov_err)
+			phba->cfg_sriov_nr_virtfn = sriov_nr_virtfn;
+	}
 
-	return 0;
+	/* return proper error code */
+	if (!rc) {
+		if (!job_posted)
+			rc = -ENOMEM;
+		else if (status)
+			rc = -EIO;
+	}
+	return rc;
 }
 
 /**
@@ -955,33 +1030,38 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
 	struct completion online_compl;
-	int status=0;
+	char *board_mode_str = NULL;
+	int status = 0;
 	int rc;
 
-	if (!phba->cfg_enable_hba_reset)
-		return -EACCES;
+	if (!phba->cfg_enable_hba_reset) {
+		status = -EACCES;
+		goto board_mode_out;
+	}
 
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-		"3050 lpfc_board_mode set to %s\n", buf);
+			 "3050 lpfc_board_mode set to %s\n", buf);
 
 	init_completion(&online_compl);
 
 	if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
 		rc = lpfc_workq_post_event(phba, &status, &online_compl,
 				      LPFC_EVT_ONLINE);
-		if (rc == 0)
-			return -ENOMEM;
+		if (rc == 0) {
+			status = -ENOMEM;
+			goto board_mode_out;
+		}
 		wait_for_completion(&online_compl);
 	} else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
 		status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
 	else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0)
 		if (phba->sli_rev == LPFC_SLI_REV4)
-			return -EINVAL;
+			status = -EINVAL;
 		else
 			status = lpfc_do_offline(phba, LPFC_EVT_WARM_START);
 	else if (strncmp(buf, "error", sizeof("error") - 1) == 0)
 		if (phba->sli_rev == LPFC_SLI_REV4)
-			return -EINVAL;
+			status = -EINVAL;
 		else
 			status = lpfc_do_offline(phba, LPFC_EVT_KILL);
 	else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0)
@@ -991,12 +1071,21 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
 	else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0)
 		status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET);
 	else
-		return -EINVAL;
+		status = -EINVAL;
 
+board_mode_out:
 	if (!status)
 		return strlen(buf);
-	else
+	else {
+		board_mode_str = strchr(buf, '\n');
+		if (board_mode_str)
+			*board_mode_str = '\0';
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+				 "3097 Failed \"%s\", status(%d), "
+				 "fc_flag(x%x)\n",
+				 buf, status, phba->pport->fc_flag);
 		return status;
+	}
 }
 
 /**
@@ -1942,6 +2031,7 @@ static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL);
 static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL);
 static DEVICE_ATTR(lpfc_sriov_hw_max_virtfn, S_IRUGO,
 		   lpfc_sriov_hw_max_virtfn_show, NULL);
+static DEVICE_ATTR(protocol, S_IRUGO, lpfc_sli4_protocol_show, NULL);
 
 static char *lpfc_soft_wwn_key = "C99G71SL8032A";
 
@@ -3830,6 +3920,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_fips_rev,
 	&dev_attr_lpfc_dss,
 	&dev_attr_lpfc_sriov_hw_max_virtfn,
+	&dev_attr_protocol,
 	NULL,
 };
 
@@ -3988,23 +4079,6 @@ static struct bin_attribute sysfs_ctlreg_attr = {
 };
 
 /**
- * sysfs_mbox_idle - frees the sysfs mailbox
- * @phba: lpfc_hba pointer
- **/
-static void
-sysfs_mbox_idle(struct lpfc_hba *phba)
-{
-	phba->sysfs_mbox.state = SMBOX_IDLE;
-	phba->sysfs_mbox.offset = 0;
-
-	if (phba->sysfs_mbox.mbox) {
-		mempool_free(phba->sysfs_mbox.mbox,
-			     phba->mbox_mem_pool);
-		phba->sysfs_mbox.mbox = NULL;
-	}
-}
-
-/**
  * sysfs_mbox_write - Write method for writing information via mbox
  * @filp: open sysfs file
  * @kobj: kernel kobject that contains the kernel class device.
@@ -4014,71 +4088,18 @@ sysfs_mbox_idle(struct lpfc_hba *phba)
  * @count: bytes to transfer.
  *
  * Description:
- * Accessed via /sys/class/scsi_host/hostxxx/mbox.
- * Uses the sysfs mbox to send buf contents to the adapter.
+ * Deprecated function. All mailbox access from user space is performed via the
+ * bsg interface.
  *
  * Returns:
- * -ERANGE off and count combo out of range
- * -EINVAL off, count or buff address invalid
- * zero if count is zero
- * -EPERM adapter is offline
- * -ENOMEM failed to allocate memory for the mail box
- * -EAGAIN offset, state or mbox is NULL
- * count number of bytes transferred
+ * -EPERM operation not permitted
  **/
 static ssize_t
 sysfs_mbox_write(struct file *filp, struct kobject *kobj,
 		 struct bin_attribute *bin_attr,
 		 char *buf, loff_t off, size_t count)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct Scsi_Host  *shost = class_to_shost(dev);
-	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
-	struct lpfc_hba   *phba = vport->phba;
-	struct lpfcMboxq  *mbox = NULL;
-
-	if ((count + off) > MAILBOX_CMD_SIZE)
-		return -ERANGE;
-
-	if (off % 4 ||  count % 4 || (unsigned long)buf % 4)
-		return -EINVAL;
-
-	if (count == 0)
-		return 0;
-
-	if (off == 0) {
-		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-		if (!mbox)
-			return -ENOMEM;
-		memset(mbox, 0, sizeof (LPFC_MBOXQ_t));
-	}
-
-	spin_lock_irq(&phba->hbalock);
-
-	if (off == 0) {
-		if (phba->sysfs_mbox.mbox)
-			mempool_free(mbox, phba->mbox_mem_pool);
-		else
-			phba->sysfs_mbox.mbox = mbox;
-		phba->sysfs_mbox.state = SMBOX_WRITING;
-	} else {
-		if (phba->sysfs_mbox.state  != SMBOX_WRITING ||
-		    phba->sysfs_mbox.offset != off           ||
-		    phba->sysfs_mbox.mbox   == NULL) {
-			sysfs_mbox_idle(phba);
-			spin_unlock_irq(&phba->hbalock);
-			return -EAGAIN;
-		}
-	}
-
-	memcpy((uint8_t *) &phba->sysfs_mbox.mbox->u.mb + off,
-	       buf, count);
-
-	phba->sysfs_mbox.offset = off + count;
-
-	spin_unlock_irq(&phba->hbalock);
-
-	return count;
+	return -EPERM;
 }
 
 /**
@@ -4091,201 +4112,18 @@ sysfs_mbox_write(struct file *filp, struct kobject *kobj,
  * @count: bytes to transfer.
  *
  * Description:
- * Accessed via /sys/class/scsi_host/hostxxx/mbox.
- * Uses the sysfs mbox to receive data from to the adapter.
+ * Deprecated function. All mailbox access from user space is performed via the
+ * bsg interface.
  *
  * Returns:
- * -ERANGE off greater than mailbox command size
- * -EINVAL off, count or buff address invalid
- * zero if off and count are zero
- * -EACCES adapter over temp
- * -EPERM garbage can value to catch a multitude of errors
- * -EAGAIN management IO not permitted, state or off error
- * -ETIME mailbox timeout
- * -ENODEV mailbox error
- * count number of bytes transferred
+ * -EPERM operation not permitted
  **/
 static ssize_t
 sysfs_mbox_read(struct file *filp, struct kobject *kobj,
 		struct bin_attribute *bin_attr,
 		char *buf, loff_t off, size_t count)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct Scsi_Host  *shost = class_to_shost(dev);
-	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
-	struct lpfc_hba   *phba = vport->phba;
-	LPFC_MBOXQ_t *mboxq;
-	MAILBOX_t *pmb;
-	uint32_t mbox_tmo;
-	int rc;
-
-	if (off > MAILBOX_CMD_SIZE)
-		return -ERANGE;
-
-	if ((count + off) > MAILBOX_CMD_SIZE)
-		count = MAILBOX_CMD_SIZE - off;
-
-	if (off % 4 ||  count % 4 || (unsigned long)buf % 4)
-		return -EINVAL;
-
-	if (off && count == 0)
-		return 0;
-
-	spin_lock_irq(&phba->hbalock);
-
-	if (phba->over_temp_state == HBA_OVER_TEMP) {
-		sysfs_mbox_idle(phba);
-		spin_unlock_irq(&phba->hbalock);
-		return  -EACCES;
-	}
-
-	if (off == 0 &&
-	    phba->sysfs_mbox.state  == SMBOX_WRITING &&
-	    phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
-		mboxq = (LPFC_MBOXQ_t *)&phba->sysfs_mbox.mbox;
-		pmb = &mboxq->u.mb;
-		switch (pmb->mbxCommand) {
-			/* Offline only */
-		case MBX_INIT_LINK:
-		case MBX_DOWN_LINK:
-		case MBX_CONFIG_LINK:
-		case MBX_CONFIG_RING:
-		case MBX_RESET_RING:
-		case MBX_UNREG_LOGIN:
-		case MBX_CLEAR_LA:
-		case MBX_DUMP_CONTEXT:
-		case MBX_RUN_DIAGS:
-		case MBX_RESTART:
-		case MBX_SET_MASK:
-		case MBX_SET_DEBUG:
-			if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
-				printk(KERN_WARNING "mbox_read:Command 0x%x "
-				       "is illegal in on-line state\n",
-				       pmb->mbxCommand);
-				sysfs_mbox_idle(phba);
-				spin_unlock_irq(&phba->hbalock);
-				return -EPERM;
-			}
-		case MBX_WRITE_NV:
-		case MBX_WRITE_VPARMS:
-		case MBX_LOAD_SM:
-		case MBX_READ_NV:
-		case MBX_READ_CONFIG:
-		case MBX_READ_RCONFIG:
-		case MBX_READ_STATUS:
-		case MBX_READ_XRI:
-		case MBX_READ_REV:
-		case MBX_READ_LNK_STAT:
-		case MBX_DUMP_MEMORY:
-		case MBX_DOWN_LOAD:
-		case MBX_UPDATE_CFG:
-		case MBX_KILL_BOARD:
-		case MBX_LOAD_AREA:
-		case MBX_LOAD_EXP_ROM:
-		case MBX_BEACON:
-		case MBX_DEL_LD_ENTRY:
-		case MBX_SET_VARIABLE:
-		case MBX_WRITE_WWN:
-		case MBX_PORT_CAPABILITIES:
-		case MBX_PORT_IOV_CONTROL:
-			break;
-		case MBX_SECURITY_MGMT:
-		case MBX_AUTH_PORT:
-			if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
-				printk(KERN_WARNING "mbox_read:Command 0x%x "
-				       "is not permitted\n", pmb->mbxCommand);
-				sysfs_mbox_idle(phba);
-				spin_unlock_irq(&phba->hbalock);
-				return -EPERM;
-			}
-			break;
-		case MBX_READ_SPARM64:
-		case MBX_READ_TOPOLOGY:
-		case MBX_REG_LOGIN:
-		case MBX_REG_LOGIN64:
-		case MBX_CONFIG_PORT:
-		case MBX_RUN_BIU_DIAG:
-			printk(KERN_WARNING "mbox_read: Illegal Command 0x%x\n",
-			       pmb->mbxCommand);
-			sysfs_mbox_idle(phba);
-			spin_unlock_irq(&phba->hbalock);
-			return -EPERM;
-		default:
-			printk(KERN_WARNING "mbox_read: Unknown Command 0x%x\n",
-			       pmb->mbxCommand);
-			sysfs_mbox_idle(phba);
-			spin_unlock_irq(&phba->hbalock);
-			return -EPERM;
-		}
-
-		/* If HBA encountered an error attention, allow only DUMP
-		 * or RESTART mailbox commands until the HBA is restarted.
-		 */
-		if (phba->pport->stopped &&
-		    pmb->mbxCommand != MBX_DUMP_MEMORY &&
-		    pmb->mbxCommand != MBX_RESTART &&
-		    pmb->mbxCommand != MBX_WRITE_VPARMS &&
-		    pmb->mbxCommand != MBX_WRITE_WWN)
-			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
-					"1259 mbox: Issued mailbox cmd "
-					"0x%x while in stopped state.\n",
-					pmb->mbxCommand);
-
-		phba->sysfs_mbox.mbox->vport = vport;
-
-		/* Don't allow mailbox commands to be sent when blocked
-		 * or when in the middle of discovery
-		 */
-		if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
-			sysfs_mbox_idle(phba);
-			spin_unlock_irq(&phba->hbalock);
-			return  -EAGAIN;
-		}
-
-		if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		    (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) {
-
-			spin_unlock_irq(&phba->hbalock);
-			rc = lpfc_sli_issue_mbox (phba,
-						  phba->sysfs_mbox.mbox,
-						  MBX_POLL);
-			spin_lock_irq(&phba->hbalock);
-
-		} else {
-			spin_unlock_irq(&phba->hbalock);
-			mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
-			rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
-			spin_lock_irq(&phba->hbalock);
-		}
-
-		if (rc != MBX_SUCCESS) {
-			if (rc == MBX_TIMEOUT) {
-				phba->sysfs_mbox.mbox = NULL;
-			}
-			sysfs_mbox_idle(phba);
-			spin_unlock_irq(&phba->hbalock);
-			return  (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV;
-		}
-		phba->sysfs_mbox.state = SMBOX_READING;
-	}
-	else if (phba->sysfs_mbox.offset != off ||
-		 phba->sysfs_mbox.state  != SMBOX_READING) {
-		printk(KERN_WARNING  "mbox_read: Bad State\n");
-		sysfs_mbox_idle(phba);
-		spin_unlock_irq(&phba->hbalock);
-		return -EAGAIN;
-	}
-
-	memcpy(buf, (uint8_t *) &pmb + off, count);
-
-	phba->sysfs_mbox.offset = off + count;
-
-	if (phba->sysfs_mbox.offset == MAILBOX_CMD_SIZE)
-		sysfs_mbox_idle(phba);
-
-	spin_unlock_irq(&phba->hbalock);
-
-	return count;
+	return -EPERM;
 }
 
 static struct bin_attribute sysfs_mbox_attr = {
@@ -4429,8 +4267,13 @@ lpfc_get_host_port_state(struct Scsi_Host *shost)
 		case LPFC_LINK_UP:
 		case LPFC_CLEAR_LA:
 		case LPFC_HBA_READY:
-			/* Links up, beyond this port_type reports state */
-			fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+			/* Links up, reports port state accordingly */
+			if (vport->port_state < LPFC_VPORT_READY)
+				fc_host_port_state(shost) =
+							FC_PORTSTATE_BYPASSED;
+			else
+				fc_host_port_state(shost) =
+							FC_PORTSTATE_ONLINE;
 			break;
 		case LPFC_HBA_ERROR:
 			fc_host_port_state(shost) = FC_PORTSTATE_ERROR;