Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch set is a lot of driver updates for qla4xxx, bfa, hpsa,
  qla2xxx.  It also removes the aic7xxx_old driver (which has been
  deprecated for nearly a decade) and adds support for deadlines in
  error handling"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (75 commits)
  [SCSI] hpsa: allow SCSI mid layer to handle unit attention
  [SCSI] hpsa: do not require board "not ready" status after hard reset
  [SCSI] hpsa: enable unit attention reporting
  [SCSI] hpsa: rename scsi prefetch field
  [SCSI] hpsa: use workqueue instead of kernel thread for lockup detection
  [SCSI] ipr: increase dump size in ipr driver
  [SCSI] mac_scsi: Fix crash on out of memory
  [SCSI] st: fix enlarge_buffer
  [SCSI] qla1280: Annotate timer on stack so object debug does not complain
  [SCSI] qla4xxx: Update driver version to 5.04.00-k3
  [SCSI] qla4xxx: Recreate chap data list during get chap operation
  [SCSI] qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr
  [SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct
  [SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection
  [SCSI] qla4xxx: Add host statistics support
  [SCSI] scsi_transport_iscsi: Add host statistics support
  [SCSI] qla4xxx: Added support for Diagnostics MBOX command
  [SCSI] bfa: Driver version upgrade to 3.2.23.0
  [SCSI] bfa: change FC_ELS_TOV to 20sec
  [SCSI] bfa: Observed auto D-port mode instead of manual
  ...

1 files changed, 0 insertions, 270 deletions

diff --git a/drivers/scsi/aic7xxx_old/aic7xxx_proc.c b/drivers/scsi/aic7xxx_old/aic7xxx_proc.c
deleted file mode 100644
index 976f45ccf2cf..000000000000
--- a/drivers/scsi/aic7xxx_old/aic7xxx_proc.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*+M*************************************************************************
- * Adaptec AIC7xxx device driver proc support for Linux.
- *
- * Copyright (c) 1995, 1996 Dean W. Gehnert
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * ----------------------------------------------------------------
- *  o Modified from the EATA-DMA /proc support.
- *  o Additional support for device block statistics provided by
- *    Matthew Jacob.
- *  o Correction of overflow by Heinz Mauelshagen
- *  o Adittional corrections by Doug Ledford
- *
- *  Dean W. Gehnert, deang@teleport.com, 05/01/96
- *
- *  $Id: aic7xxx_proc.c,v 4.1 1997/06/97 08:23:42 deang Exp $
- *-M*************************************************************************/
-
-
-#define HDRB \
-"               0 - 4K   4 - 16K   16 - 64K  64 - 256K  256K - 1M        1M+"
-
-
-/*+F*************************************************************************
- * Function:
- *   aic7xxx_show_info
- *
- * Description:
- *   Return information to handle /proc support for the driver.
- *-F*************************************************************************/
-int
-aic7xxx_show_info(struct seq_file *m, struct Scsi_Host *HBAptr)
-{
-  struct aic7xxx_host *p;
-  struct aic_dev_data *aic_dev;
-  struct scsi_device *sdptr;
-  unsigned char i;
-  unsigned char tindex;
-
-  for(p=first_aic7xxx; p && p->host != HBAptr; p=p->next)
-    ;
-
-  if (!p)
-  {
-    seq_printf(m, "Can't find adapter for host number %d\n", HBAptr->host_no);
-    return 0;
-  }
-
-  p = (struct aic7xxx_host *) HBAptr->hostdata;
-
-  seq_printf(m, "Adaptec AIC7xxx driver version: ");
-  seq_printf(m, "%s/", AIC7XXX_C_VERSION);
-  seq_printf(m, "%s", AIC7XXX_H_VERSION);
-  seq_printf(m, "\n");
-  seq_printf(m, "Adapter Configuration:\n");
-  seq_printf(m, "           SCSI Adapter: %s\n",
-      board_names[p->board_name_index]);
-  if (p->flags & AHC_TWIN)
-    seq_printf(m, "                         Twin Channel Controller ");
-  else
-  {
-    char *channel = "";
-    char *ultra = "";
-    char *wide = "Narrow ";
-    if (p->flags & AHC_MULTI_CHANNEL)
-    {
-      channel = " Channel A";
-      if (p->flags & (AHC_CHNLB|AHC_CHNLC))
-        channel = (p->flags & AHC_CHNLB) ? " Channel B" : " Channel C";
-    }
-    if (p->features & AHC_WIDE)
-      wide = "Wide ";
-    if (p->features & AHC_ULTRA3)
-    {
-      switch(p->chip & AHC_CHIPID_MASK)
-      {
-        case AHC_AIC7892:
-        case AHC_AIC7899:
-          ultra = "Ultra-160/m LVD/SE ";
-          break;
-        default:
-          ultra = "Ultra-3 LVD/SE ";
-          break;
-      }
-    }
-    else if (p->features & AHC_ULTRA2)
-      ultra = "Ultra-2 LVD/SE ";
-    else if (p->features & AHC_ULTRA)
-      ultra = "Ultra ";
-    seq_printf(m, "                           %s%sController%s ",
-      ultra, wide, channel);
-  }
-  switch(p->chip & ~AHC_CHIPID_MASK)
-  {
-    case AHC_VL:
-      seq_printf(m, "at VLB slot %d\n", p->pci_device_fn);
-      break;
-    case AHC_EISA:
-      seq_printf(m, "at EISA slot %d\n", p->pci_device_fn);
-      break;
-    default:
-      seq_printf(m, "at PCI %d/%d/%d\n", p->pci_bus,
-        PCI_SLOT(p->pci_device_fn), PCI_FUNC(p->pci_device_fn));
-      break;
-  }
-  if( !(p->maddr) )
-  {
-    seq_printf(m, "    Programmed I/O Base: %lx\n", p->base);
-  }
-  else
-  {
-    seq_printf(m, "    PCI MMAPed I/O Base: 0x%lx\n", p->mbase);
-  }
-  if( (p->chip & (AHC_VL | AHC_EISA)) )
-  {
-    seq_printf(m, "    BIOS Memory Address: 0x%08x\n", p->bios_address);
-  }
-  seq_printf(m, " Adapter SEEPROM Config: %s\n",
-          (p->flags & AHC_SEEPROM_FOUND) ? "SEEPROM found and used." :
-         ((p->flags & AHC_USEDEFAULTS) ? "SEEPROM not found, using defaults." :
-           "SEEPROM not found, using leftover BIOS values.") );
-  seq_printf(m, "      Adaptec SCSI BIOS: %s\n",
-          (p->flags & AHC_BIOS_ENABLED) ? "Enabled" : "Disabled");
-  seq_printf(m, "                    IRQ: %d\n", HBAptr->irq);
-  seq_printf(m, "                   SCBs: Active %d, Max Active %d,\n",
-            p->activescbs, p->max_activescbs);
-  seq_printf(m, "                         Allocated %d, HW %d, "
-            "Page %d\n", p->scb_data->numscbs, p->scb_data->maxhscbs,
-            p->scb_data->maxscbs);
-  if (p->flags & AHC_EXTERNAL_SRAM)
-    seq_printf(m, "                         Using External SCB SRAM\n");
-  seq_printf(m, "             Interrupts: %ld", p->isr_count);
-  if (p->chip & AHC_EISA)
-  {
-    seq_printf(m, " %s\n",
-        (p->pause & IRQMS) ? "(Level Sensitive)" : "(Edge Triggered)");
-  }
-  else
-  {
-    seq_printf(m, "\n");
-  }
-  seq_printf(m, "      BIOS Control Word: 0x%04x\n",
-            p->bios_control);
-  seq_printf(m, "   Adapter Control Word: 0x%04x\n",
-            p->adapter_control);
-  seq_printf(m, "   Extended Translation: %sabled\n",
-      (p->flags & AHC_EXTEND_TRANS_A) ? "En" : "Dis");
-  seq_printf(m, "Disconnect Enable Flags: 0x%04x\n", p->discenable);
-  if (p->features & (AHC_ULTRA | AHC_ULTRA2))
-  {
-    seq_printf(m, "     Ultra Enable Flags: 0x%04x\n", p->ultraenb);
-  }
-  seq_printf(m, "Default Tag Queue Depth: %d\n", aic7xxx_default_queue_depth);
-  seq_printf(m, "    Tagged Queue By Device array for aic7xxx host "
-                       "instance %d:\n", p->instance);
-  seq_printf(m, "      {");
-  for(i=0; i < (MAX_TARGETS - 1); i++)
-    seq_printf(m, "%d,",aic7xxx_tag_info[p->instance].tag_commands[i]);
-  seq_printf(m, "%d}\n",aic7xxx_tag_info[p->instance].tag_commands[i]);
-
-  seq_printf(m, "\n");
-  seq_printf(m, "Statistics:\n\n");
-  list_for_each_entry(aic_dev, &p->aic_devs, list)
-  {
-    sdptr = aic_dev->SDptr;
-    tindex = sdptr->channel << 3 | sdptr->id;
-    seq_printf(m, "(scsi%d:%d:%d:%d)\n",
-        p->host_no, sdptr->channel, sdptr->id, sdptr->lun);
-    seq_printf(m, "  Device using %s/%s",
-          (aic_dev->cur.width == MSG_EXT_WDTR_BUS_16_BIT) ?
-          "Wide" : "Narrow",
-          (aic_dev->cur.offset != 0) ?
-          "Sync transfers at " : "Async transfers.\n" );
-    if (aic_dev->cur.offset != 0)
-    {
-      struct aic7xxx_syncrate *sync_rate;
-      unsigned char options = aic_dev->cur.options;
-      int period = aic_dev->cur.period;
-      int rate = (aic_dev->cur.width ==
-                  MSG_EXT_WDTR_BUS_16_BIT) ? 1 : 0;
-
-      sync_rate = aic7xxx_find_syncrate(p, &period, 0, &options);
-      if (sync_rate != NULL)
-      {
-        seq_printf(m, "%s MByte/sec, offset %d\n",
-                        sync_rate->rate[rate],
-                        aic_dev->cur.offset );
-      }
-      else
-      {
-        seq_printf(m, "3.3 MByte/sec, offset %d\n",
-                        aic_dev->cur.offset );
-      }
-    }
-    seq_printf(m, "  Transinfo settings: ");
-    seq_printf(m, "current(%d/%d/%d/%d), ",
-                    aic_dev->cur.period,
-                    aic_dev->cur.offset,
-                    aic_dev->cur.width,
-                    aic_dev->cur.options);
-    seq_printf(m, "goal(%d/%d/%d/%d), ",
-                    aic_dev->goal.period,
-                    aic_dev->goal.offset,
-                    aic_dev->goal.width,
-                    aic_dev->goal.options);
-    seq_printf(m, "user(%d/%d/%d/%d)\n",
-                    p->user[tindex].period,
-                    p->user[tindex].offset,
-                    p->user[tindex].width,
-                    p->user[tindex].options);
-    if(sdptr->simple_tags)
-    {
-      seq_printf(m, "  Tagged Command Queueing Enabled, Ordered Tags %s, Depth %d/%d\n", sdptr->ordered_tags ? "Enabled" : "Disabled", sdptr->queue_depth, aic_dev->max_q_depth);
-    }
-    if(aic_dev->barrier_total)
-      seq_printf(m, "  Total transfers %ld:\n    (%ld/%ld/%ld/%ld reads/writes/REQ_BARRIER/Ordered Tags)\n",
-        aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total,
-        aic_dev->barrier_total, aic_dev->ordered_total);
-    else
-      seq_printf(m, "  Total transfers %ld:\n    (%ld/%ld reads/writes)\n",
-        aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total);
-    seq_printf(m, "%s\n", HDRB);
-    seq_printf(m, "   Reads:");
-    for (i = 0; i < ARRAY_SIZE(aic_dev->r_bins); i++)
-    {
-      seq_printf(m, " %10ld", aic_dev->r_bins[i]);
-    }
-    seq_printf(m, "\n");
-    seq_printf(m, "  Writes:");
-    for (i = 0; i < ARRAY_SIZE(aic_dev->w_bins); i++)
-    {
-      seq_printf(m, " %10ld", aic_dev->w_bins[i]);
-    }
-    seq_printf(m, "\n");
-    seq_printf(m, "\n\n");
-  }
-  return 0;
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 2
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -2
- * c-argdecl-indent: 2
- * c-label-offset: -2
- * c-continued-statement-offset: 2
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */