[SCSI] zfcp: Defer resource allocation to first ccw_set_online call

So far, zfcp allocated all resources required for FCP
adapters/subchannels when the device was discovered in the ccw_probe
callback. If there are lots of unused FCP subchannels attached to a
system, this is a waste of resources. To alleviate this, defer the
resource allocation to the first call to ccw_set_online. To avoid
disruptions during possible following calls to ccw_set_offline and
then ccw_set_online, keep the adapter resources until the device is
finally being removed via ccw_remove. While doing this, also manage
the zfcp erp thread together with all other adapter resources in
zfcp_adapter_enqueue/dequeue.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 43 insertions, 31 deletions

diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index d9da5c42ccbe..82ae6ed7ef83 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -18,6 +18,9 @@ static int zfcp_ccw_suspend(struct ccw_device *cdev)
 {
 	struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
 
+	if (!adapter)
+		return 0;
+
 	down(&zfcp_data.config_sema);
 
 	zfcp_erp_adapter_shutdown(adapter, 0, "ccsusp1", NULL);
@@ -33,6 +36,9 @@ static int zfcp_ccw_activate(struct ccw_device *cdev)
 {
 	struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
 
+	if (!adapter)
+		return 0;
+
 	zfcp_erp_modify_adapter_status(adapter, "ccresu1", NULL,
 				       ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
 	zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
@@ -63,25 +69,14 @@ int zfcp_ccw_priv_sch(struct zfcp_adapter *adapter)
  * zfcp_ccw_probe - probe function of zfcp driver
  * @ccw_device: pointer to belonging ccw device
  *
- * This function gets called by the common i/o layer and sets up the initial
- * data structures for each fcp adapter, which was detected by the system.
- * Also the sysfs files for this adapter will be created by this function.
- * In addition the nameserver port will be added to the ports of the adapter
- * and its sysfs representation will be created too.
+ * This function gets called by the common i/o layer for each FCP
+ * device found on the current system. This is only a stub to make cio
+ * work: To only allocate adapter resources for devices actually used,
+ * the allocation is deferred to the first call to ccw_set_online.
  */
 static int zfcp_ccw_probe(struct ccw_device *ccw_device)
 {
-	int retval = 0;
-
-	down(&zfcp_data.config_sema);
-	if (zfcp_adapter_enqueue(ccw_device)) {
-		dev_err(&ccw_device->dev,
-			"Setting up data structures for the "
-			"FCP adapter failed\n");
-		retval = -EINVAL;
-	}
-	up(&zfcp_data.config_sema);
-	return retval;
+	return 0;
 }
 
 /**
@@ -102,8 +97,11 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
 	LIST_HEAD(port_remove_lh);
 
 	ccw_device_set_offline(ccw_device);
+
 	down(&zfcp_data.config_sema);
 	adapter = dev_get_drvdata(&ccw_device->dev);
+	if (!adapter)
+		goto out;
 
 	write_lock_irq(&zfcp_data.config_lock);
 	list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
@@ -129,6 +127,7 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
 	wait_event(adapter->remove_wq, atomic_read(&adapter->refcount) == 0);
 	zfcp_adapter_dequeue(adapter);
 
+out:
 	up(&zfcp_data.config_sema);
 }
 
@@ -136,22 +135,33 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
  * zfcp_ccw_set_online - set_online function of zfcp driver
  * @ccw_device: pointer to belonging ccw device
  *
- * This function gets called by the common i/o layer and sets an adapter
- * into state online. Setting an fcp device online means that it will be
- * registered with the SCSI stack, that the QDIO queues will be set up
- * and that the adapter will be opened (asynchronously).
+ * This function gets called by the common i/o layer and sets an
+ * adapter into state online.  The first call will allocate all
+ * adapter resources that will be retained until the device is removed
+ * via zfcp_ccw_remove.
+ *
+ * Setting an fcp device online means that it will be registered with
+ * the SCSI stack, that the QDIO queues will be set up and that the
+ * adapter will be opened.
  */
 static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
 {
 	struct zfcp_adapter *adapter;
-	int retval;
+	int ret = 0;
 
 	down(&zfcp_data.config_sema);
 	adapter = dev_get_drvdata(&ccw_device->dev);
 
-	retval = zfcp_erp_thread_setup(adapter);
-	if (retval)
-		goto out;
+	if (!adapter) {
+		ret = zfcp_adapter_enqueue(ccw_device);
+		if (ret) {
+			dev_err(&ccw_device->dev,
+				"Setting up data structures for the "
+				"FCP adapter failed\n");
+			goto out;
+		}
+		adapter = dev_get_drvdata(&ccw_device->dev);
+	}
 
 	/* initialize request counter */
 	BUG_ON(!zfcp_reqlist_isempty(adapter));
@@ -162,13 +172,11 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
 	zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
 				"ccsonl2", NULL);
 	zfcp_erp_wait(adapter);
+out:
 	up(&zfcp_data.config_sema);
-	flush_work(&adapter->scan_work);
-	return 0;
-
- out:
-	up(&zfcp_data.config_sema);
-	return retval;
+	if (!ret)
+		flush_work(&adapter->scan_work);
+	return ret;
 }
 
 /**
@@ -184,10 +192,13 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
 
 	down(&zfcp_data.config_sema);
 	adapter = dev_get_drvdata(&ccw_device->dev);
+	if (!adapter)
+		goto out;
+
 	zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL);
 	zfcp_erp_wait(adapter);
-	zfcp_erp_thread_kill(adapter);
 	up(&zfcp_data.config_sema);
+out:
 	return 0;
 }
 
@@ -244,6 +255,7 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev)
 	adapter = dev_get_drvdata(&cdev->dev);
 	zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL);
 	zfcp_erp_wait(adapter);
+	zfcp_erp_thread_kill(adapter);
 	up(&zfcp_data.config_sema);
 }