summaryrefslogtreecommitdiff
path: root/drivers/regulator/axp20x-regulator.c
diff options
context:
space:
mode:
authorChen-Yu Tsai <wens@csie.org>2017-09-29 06:25:09 +0300
committerMark Brown <broonie@kernel.org>2017-10-04 13:49:04 +0300
commitd81851c1764b26b46670c0b3bd6701308ddaab98 (patch)
treeea7792757554c7ffd9350d9372431957a196aeac /drivers/regulator/axp20x-regulator.c
parent986e7b7e4991a5d3abab26f97a671512e09e4417 (diff)
downloadlinux-d81851c1764b26b46670c0b3bd6701308ddaab98.tar.xz
regulator: axp20x: Add support for AXP813 regulators
The AXP813 PMIC has 7 DC-DC buck regulators, 16 LDOs (including the fixed RTC LDO and 2 GPIO LDOs), and 1 switchable. The drive-vbus feature is also supported. All the hardware details are very similar to the AXP803, with the following exceptions: - Extra DCDC7 buck regulator, with the same range as DCDC6 - SWitch now has a separate supply pin, instead of being chained internaly from DCDC1 - RTC LDO output voltage is now 1.8V - FLDO3 is an LDO with switchable supplies, but unconfigurable output voltage. The voltage is always half that of its supply. Support for FLDO3 is currently unimplemented, as it requires runtime switching of its supplies, something the regulator subsystem does not support. It is not used in either the reference designs nor actually produced boards available. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator/axp20x-regulator.c')
-rw-r--r--drivers/regulator/axp20x-regulator.c102
1 files changed, 98 insertions, 4 deletions
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 376a99b7cf5d..e1761df4cbfd 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -244,6 +244,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
.ops = &axp20x_ops_sw,
};
+/* DCDC ranges shared with AXP813 */
static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000),
@@ -426,6 +427,69 @@ static const struct regulator_desc axp809_regulators[] = {
AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
};
+static const struct regulator_desc axp813_regulators[] = {
+ AXP_DESC(AXP813, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+ AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+ AXP_DESC_RANGES(AXP813, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(1)),
+ AXP_DESC_RANGES(AXP813, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(2)),
+ AXP_DESC_RANGES(AXP813, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(3)),
+ AXP_DESC_RANGES(AXP813, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
+ 68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(4)),
+ AXP_DESC_RANGES(AXP813, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
+ 72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(5)),
+ AXP_DESC_RANGES(AXP813, DCDC7, "dcdc7", "vin7", axp803_dcdc6_ranges,
+ 72, AXP813_DCDC7_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(6)),
+ AXP_DESC(AXP813, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+ AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+ AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+ AXP_DESC(AXP813, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+ AXP_DESC_RANGES(AXP813, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
+ 32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+ BIT(4)),
+ AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+ AXP_DESC(AXP813, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
+ AXP_DESC(AXP813, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+ AXP_DESC(AXP813, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+ AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+ /* to do / check ... */
+ AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
+ AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
+ AXP_DESC(AXP813, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
+ AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
+ /*
+ * TODO: FLDO3 = {DCDC5, FLDOIN} / 2
+ *
+ * This means FLDO3 effectively switches supplies at runtime,
+ * something the regulator subsystem does not support.
+ */
+ AXP_DESC_FIXED(AXP813, RTC_LDO, "rtc-ldo", "ips", 1800),
+ AXP_DESC_IO(AXP813, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100,
+ AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_IO(AXP813, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100,
+ AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_SW(AXP813, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(7)),
+};
+
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -441,9 +505,10 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
step = 75;
break;
case AXP803_ID:
+ case AXP813_ID:
/*
- * AXP803 DCDC work frequency setting has the same range and
- * step as AXP22X, but at a different register.
+ * AXP803/AXP813 DCDC work frequency setting has the same
+ * range and step as AXP22X, but at a different register.
* Fall through to the check below.
* (See include/linux/mfd/axp20x.h)
*/
@@ -561,6 +626,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
workmode <<= id - AXP803_DCDC1;
break;
+ case AXP813_ID:
+ if (id < AXP813_DCDC1 || id > AXP813_DCDC7)
+ return -EINVAL;
+
+ mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP813_DCDC1);
+ workmode <<= id - AXP813_DCDC1;
+ break;
+
default:
/* should not happen */
WARN_ON(1);
@@ -579,8 +652,8 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
u32 reg = 0;
/*
- * Currently in our supported AXP variants, only AXP803 and AXP806
- * have polyphase regulators.
+ * Currently in our supported AXP variants, only AXP803, AXP806,
+ * and AXP813 have polyphase regulators.
*/
switch (axp20x->variant) {
case AXP803_ID:
@@ -608,6 +681,17 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
}
break;
+ case AXP813_ID:
+ regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, &reg);
+
+ switch (id) {
+ case AXP803_DCDC3:
+ return !!(reg & BIT(6));
+ case AXP803_DCDC6:
+ return !!(reg & BIT(5));
+ }
+ break;
+
default:
return false;
}
@@ -656,6 +740,12 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
regulators = axp809_regulators;
nregulators = AXP809_REG_ID_MAX;
break;
+ case AXP813_ID:
+ regulators = axp813_regulators;
+ nregulators = AXP813_REG_ID_MAX;
+ drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
+ "x-powers,drive-vbus-en");
+ break;
default:
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
@@ -677,6 +767,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
if (axp20x_is_polyphase_slave(axp20x, i))
continue;
+ /* Support for AXP813's FLDO3 is not implemented */
+ if (axp20x->variant == AXP813_ID && i == AXP813_FLDO3)
+ continue;
+
/*
* Regulators DC1SW and DC5LDO are connected internally,
* so we have to handle their supply names separately.