asus-wmi: add fan control

This patch is partially based on Felipe Contrera's earlier patch, that
was discussed here: https://lkml.org/lkml/2013/10/8/800
Some problems of that patch are solved, now:

1) The main obstacle for the earlier patch seemed to be the use of
virt_to_phys, which is accepted, now

2) random memory corruption occurred on my notebook, thus DMA-able memory
is allocated now, which solves this problem

3) hwmon interface is used instead of the thermal interface, as a
hwmon device is already set up by this driver and seemed more
appropriate than the thermal interface

4) Calling the ACPI-functions was modularized thus it's possible to call
some multifunctions easily, now (by using
asus_wmi_evaluate_method_agfn).

Unfortunately the WMI doesn't support controlling both fans on
a dual-fan notebook because of an restriction in the acpi-method
"SFNS", that is callable through the wmi. If "SFNV" would be called
directly even dual fan configurations could be controlled, but not by using
wmi.

Speed readings only work on auto-mode, thus "-1" will be reported in
manual mode.
Additionally the speed readings are reported as hundreds of RPM thus
they are not too precise.

This patch is tested only on one notebook (N551JK) but a similar module,
that contained some code to try to control the second fan also, was
reported to work on an UX32VD, at least for the first fan.

As Felipe already mentioned the low-level functions are described here:
http://forum.notebookreview.com/threads/fan-control-on-asus-prime-ux31-ux31a-ux32a-ux32vd.705656/

Signed-off-by: Kast Bernd <kastbernd@gmx.de>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

1 files changed, 323 insertions, 21 deletions

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 7543a56e0f45..9b82364e0f3c 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -78,6 +78,7 @@ MODULE_LICENSE("GPL");
 #define ASUS_WMI_METHODID_GPID		0x44495047 /* Get Panel ID?? (Resol) */
 #define ASUS_WMI_METHODID_QMOD		0x444F4D51 /* Quiet MODe */
 #define ASUS_WMI_METHODID_SPLV		0x4C425053 /* Set Panel Light Value */
+#define ASUS_WMI_METHODID_AGFN		0x4E464741 /* FaN? */
 #define ASUS_WMI_METHODID_SFUN		0x4E554653 /* FUNCtionalities */
 #define ASUS_WMI_METHODID_SDSP		0x50534453 /* Set DiSPlay output */
 #define ASUS_WMI_METHODID_GDSP		0x50534447 /* Get DiSPlay output */
@@ -150,12 +151,38 @@ MODULE_LICENSE("GPL");
 #define ASUS_WMI_DSTS_BRIGHTNESS_MASK	0x000000FF
 #define ASUS_WMI_DSTS_MAX_BRIGTH_MASK	0x0000FF00
 
+#define ASUS_FAN_DESC			"cpu_fan"
+#define ASUS_FAN_MFUN			0x13
+#define ASUS_FAN_SFUN_READ		0x06
+#define ASUS_FAN_SFUN_WRITE		0x07
+#define ASUS_FAN_CTRL_MANUAL		1
+#define ASUS_FAN_CTRL_AUTO		2
+
 struct bios_args {
 	u32 arg0;
 	u32 arg1;
 } __packed;
 
 /*
+ * Struct that's used for all methods called via AGFN. Naming is
+ * identically to the AML code.
+ */
+struct agfn_args {
+	u16 mfun; /* probably "Multi-function" to be called */
+	u16 sfun; /* probably "Sub-function" to be called */
+	u16 len;  /* size of the hole struct, including subfunction fields */
+	u8 stas;  /* not used by now */
+	u8 err;   /* zero on success */
+} __packed;
+
+/* struct used for calling fan read and write methods */
+struct fan_args {
+	struct agfn_args agfn;	/* common fields */
+	u8 fan;			/* fan number: 0: set auto mode 1: 1st fan */
+	u32 speed;		/* read: RPM/100 - write: 0-255 */
+} __packed;
+
+/*
  * <platform>/    - debugfs root directory
  *   dev_id      - current dev_id
  *   ctrl_param  - current ctrl_param
@@ -204,6 +231,10 @@ struct asus_wmi {
 	struct asus_rfkill gps;
 	struct asus_rfkill uwb;
 
+	bool asus_hwmon_fan_manual_mode;
+	int asus_hwmon_num_fans;
+	int asus_hwmon_pwm;
+
 	struct hotplug_slot *hotplug_slot;
 	struct mutex hotplug_lock;
 	struct mutex wmi_lock;
@@ -294,6 +325,36 @@ exit:
 	return 0;
 }
 
+static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
+{
+	struct acpi_buffer input;
+	u64 phys_addr;
+	u32 retval;
+	u32 status = -1;
+
+	/*
+	 * Copy to dma capable address otherwise memory corruption occurs as
+	 * bios has to be able to access it.
+	 */
+	input.pointer = kzalloc(args.length, GFP_DMA | GFP_KERNEL);
+	input.length = args.length;
+	if (!input.pointer)
+		return -ENOMEM;
+	phys_addr = virt_to_phys(input.pointer);
+	memcpy(input.pointer, args.pointer, args.length);
+
+	status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_AGFN,
+					phys_addr, 0, &retval);
+	if (!status)
+		memcpy(args.pointer, input.pointer, args.length);
+
+	kfree(input.pointer);
+	if (status)
+		return -ENXIO;
+
+	return retval;
+}
+
 static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval)
 {
 	return asus_wmi_evaluate_method(asus->dsts_id, dev_id, 0, retval);
@@ -1022,35 +1083,228 @@ exit:
 /*
  * Hwmon device
  */
-static ssize_t asus_hwmon_pwm1(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf)
+static int asus_hwmon_agfn_fan_speed_read(struct asus_wmi *asus, int fan,
+					  int *speed)
+{
+	struct fan_args args = {
+		.agfn.len = sizeof(args),
+		.agfn.mfun = ASUS_FAN_MFUN,
+		.agfn.sfun = ASUS_FAN_SFUN_READ,
+		.fan = fan,
+		.speed = 0,
+	};
+	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+	int status;
+
+	if (fan != 1)
+		return -EINVAL;
+
+	status = asus_wmi_evaluate_method_agfn(input);
+
+	if (status || args.agfn.err)
+		return -ENXIO;
+
+	if (speed)
+		*speed = args.speed;
+
+	return 0;
+}
+
+static int asus_hwmon_agfn_fan_speed_write(struct asus_wmi *asus, int fan,
+				     int *speed)
+{
+	struct fan_args args = {
+		.agfn.len = sizeof(args),
+		.agfn.mfun = ASUS_FAN_MFUN,
+		.agfn.sfun = ASUS_FAN_SFUN_WRITE,
+		.fan = fan,
+		.speed = speed ?  *speed : 0,
+	};
+	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+	int status;
+
+	/* 1: for setting 1st fan's speed 0: setting auto mode */
+	if (fan != 1 && fan != 0)
+		return -EINVAL;
+
+	status = asus_wmi_evaluate_method_agfn(input);
+
+	if (status || args.agfn.err)
+		return -ENXIO;
+
+	if (speed && fan == 1)
+		asus->asus_hwmon_pwm = *speed;
+
+	return 0;
+}
+
+/*
+ * Check if we can read the speed of one fan. If true we assume we can also
+ * control it.
+ */
+static int asus_hwmon_get_fan_number(struct asus_wmi *asus, int *num_fans)
+{
+	int status;
+	int speed = 0;
+
+	*num_fans = 0;
+
+	status = asus_hwmon_agfn_fan_speed_read(asus, 1, &speed);
+	if (!status)
+		*num_fans = 1;
+
+	return 0;
+}
+
+static int asus_hwmon_fan_set_auto(struct asus_wmi *asus)
+{
+	int status;
+
+	status = asus_hwmon_agfn_fan_speed_write(asus, 0, NULL);
+	if (status)
+		return -ENXIO;
+
+	asus->asus_hwmon_fan_manual_mode = false;
+
+	return 0;
+}
+
+static int asus_hwmon_fan_rpm_show(struct device *dev, int fan)
 {
 	struct asus_wmi *asus = dev_get_drvdata(dev);
-	u32 value;
+	int value;
+	int ret;
+
+	/* no speed readable on manual mode */
+	if (asus->asus_hwmon_fan_manual_mode)
+		return -ENXIO;
+
+	ret = asus_hwmon_agfn_fan_speed_read(asus, fan+1, &value);
+	if (ret) {
+		pr_warn("reading fan speed failed: %d\n", ret);
+		return -ENXIO;
+	}
+
+	return value;
+}
+
+static void asus_hwmon_pwm_show(struct asus_wmi *asus, int fan, int *value)
+{
 	int err;
 
-	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value);
+	if (asus->asus_hwmon_pwm >= 0) {
+		*value = asus->asus_hwmon_pwm;
+		return;
+	}
 
+	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, value);
 	if (err < 0)
-		return err;
+		return;
 
-	value &= 0xFF;
-
-	if (value == 1) /* Low Speed */
-		value = 85;
-	else if (value == 2)
-		value = 170;
-	else if (value == 3)
-		value = 255;
-	else if (value != 0) {
-		pr_err("Unknown fan speed %#x\n", value);
-		value = -1;
+	*value &= 0xFF;
+
+	if (*value == 1) /* Low Speed */
+		*value = 85;
+	else if (*value == 2)
+		*value = 170;
+	else if (*value == 3)
+		*value = 255;
+	else if (*value) {
+		pr_err("Unknown fan speed %#x\n", *value);
+		*value = -1;
 	}
+}
+
+static ssize_t pwm1_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	int value;
+
+	asus_hwmon_pwm_show(asus, 0, &value);
 
 	return sprintf(buf, "%d\n", value);
 }
 
+static ssize_t pwm1_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count) {
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	int value;
+	int state;
+	int ret;
+
+	ret = kstrtouint(buf, 10, &value);
+
+	if (ret)
+		return ret;
+
+	value = clamp(value, 0, 255);
+
+	state = asus_hwmon_agfn_fan_speed_write(asus, 1, &value);
+	if (state)
+		pr_warn("Setting fan speed failed: %d\n", state);
+	else
+		asus->asus_hwmon_fan_manual_mode = true;
+
+	return count;
+}
+
+static ssize_t fan1_input_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int value = asus_hwmon_fan_rpm_show(dev, 0);
+
+	return sprintf(buf, "%d\n", value < 0 ? -1 : value*100);
+
+}
+
+static ssize_t pwm1_enable_show(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+
+	if (asus->asus_hwmon_fan_manual_mode)
+		return sprintf(buf, "%d\n", ASUS_FAN_CTRL_MANUAL);
+
+	return sprintf(buf, "%d\n", ASUS_FAN_CTRL_AUTO);
+}
+
+static ssize_t pwm1_enable_store(struct device *dev,
+						  struct device_attribute *attr,
+						  const char *buf, size_t count)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	int status = 0;
+	int state;
+	int ret;
+
+	ret = kstrtouint(buf, 10, &state);
+
+	if (ret)
+		return ret;
+
+	if (state == ASUS_FAN_CTRL_MANUAL)
+		asus->asus_hwmon_fan_manual_mode = true;
+	else
+		status = asus_hwmon_fan_set_auto(asus);
+
+	if (status)
+		return status;
+
+	return count;
+}
+
+static ssize_t fan1_label_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	return sprintf(buf, "%s\n", ASUS_FAN_DESC);
+}
+
 static ssize_t asus_hwmon_temp1(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
@@ -1069,11 +1323,21 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
 	return sprintf(buf, "%d\n", value);
 }
 
-static DEVICE_ATTR(pwm1, S_IRUGO, asus_hwmon_pwm1, NULL);
+/* Fan1 */
+static DEVICE_ATTR_RW(pwm1);
+static DEVICE_ATTR_RW(pwm1_enable);
+static DEVICE_ATTR_RO(fan1_input);
+static DEVICE_ATTR_RO(fan1_label);
+
+/* Temperature */
 static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL);
 
 static struct attribute *hwmon_attributes[] = {
 	&dev_attr_pwm1.attr,
+	&dev_attr_pwm1_enable.attr,
+	&dev_attr_fan1_input.attr,
+	&dev_attr_fan1_label.attr,
+
 	&dev_attr_temp1_input.attr,
 	NULL
 };
@@ -1084,19 +1348,28 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct platform_device *pdev = to_platform_device(dev->parent);
 	struct asus_wmi *asus = platform_get_drvdata(pdev);
-	bool ok = true;
 	int dev_id = -1;
+	int fan_attr = -1;
 	u32 value = ASUS_WMI_UNSUPPORTED_METHOD;
+	bool ok = true;
 
 	if (attr == &dev_attr_pwm1.attr)
 		dev_id = ASUS_WMI_DEVID_FAN_CTRL;
 	else if (attr == &dev_attr_temp1_input.attr)
 		dev_id = ASUS_WMI_DEVID_THERMAL_CTRL;
 
+
+	if (attr == &dev_attr_fan1_input.attr
+	    || attr == &dev_attr_fan1_label.attr
+	    || attr == &dev_attr_pwm1.attr
+	    || attr == &dev_attr_pwm1_enable.attr) {
+		fan_attr = 1;
+	}
+
 	if (dev_id != -1) {
 		int err = asus_wmi_get_devstate(asus, dev_id, &value);
 
-		if (err < 0)
+		if (err < 0 && fan_attr == -1)
 			return 0; /* can't return negative here */
 	}
 
@@ -1112,10 +1385,16 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
 		if (value == ASUS_WMI_UNSUPPORTED_METHOD || value & 0xFFF80000
 		    || (!asus->sfun && !(value & ASUS_WMI_DSTS_PRESENCE_BIT)))
 			ok = false;
+		else
+			ok = fan_attr <= asus->asus_hwmon_num_fans;
 	} else if (dev_id == ASUS_WMI_DEVID_THERMAL_CTRL) {
 		/* If value is zero, something is clearly wrong */
-		if (value == 0)
+		if (!value)
 			ok = false;
+	} else if (fan_attr <= asus->asus_hwmon_num_fans && fan_attr != -1) {
+		ok = true;
+	} else {
+		ok = false;
 	}
 
 	return ok ? attr->mode : 0;
@@ -1723,6 +2002,25 @@ error_debugfs:
 	return -ENOMEM;
 }
 
+static int asus_wmi_fan_init(struct asus_wmi *asus)
+{
+	int status;
+
+	asus->asus_hwmon_pwm = -1;
+	asus->asus_hwmon_num_fans = -1;
+	asus->asus_hwmon_fan_manual_mode = false;
+
+	status = asus_hwmon_get_fan_number(asus, &asus->asus_hwmon_num_fans);
+	if (status) {
+		asus->asus_hwmon_num_fans = 0;
+		pr_warn("Could not determine number of fans: %d\n", status);
+		return -ENXIO;
+	}
+
+	pr_info("Number of fans: %d\n", asus->asus_hwmon_num_fans);
+	return 0;
+}
+
 /*
  * WMI Driver
  */
@@ -1756,6 +2054,9 @@ static int asus_wmi_add(struct platform_device *pdev)
 	if (err)
 		goto fail_input;
 
+	err = asus_wmi_fan_init(asus); /* probably no problems on error */
+	asus_hwmon_fan_set_auto(asus);
+
 	err = asus_wmi_hwmon_init(asus);
 	if (err)
 		goto fail_hwmon;
@@ -1832,6 +2133,7 @@ static int asus_wmi_remove(struct platform_device *device)
 	asus_wmi_rfkill_exit(asus);
 	asus_wmi_debugfs_exit(asus);
 	asus_wmi_platform_exit(asus);
+	asus_hwmon_fan_set_auto(asus);
 
 	kfree(asus);
 	return 0;