pinctrl: qcom: pmic-gpio/mpp: of_irq_count() == npins

The number of interrupts is always equal to the number of pins
provided by the PMIC gpio and MPP hardware blocks. Count the
number of irqs to figure out the number of pins instead of adding
more compatible strings or doing math on the reg property. This
should make the code more generic and ease the number of changes
we have to make to the driver for each new pmic revision.

Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Björn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

4 files changed, 32 insertions, 23 deletions

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 6c42ca14d2fd..543cdd609788 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -14,6 +14,7 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinmux.h>
@@ -693,16 +694,15 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 	struct pmic_gpio_pad *pad, *pads;
 	struct pmic_gpio_state *state;
 	int ret, npins, i;
-	u32 res[2];
+	u32 reg;
 
-	ret = of_property_read_u32_array(dev->of_node, "reg", res, 2);
+	ret = of_property_read_u32(dev->of_node, "reg", &reg);
 	if (ret < 0) {
-		dev_err(dev, "missing base address and/or range");
+		dev_err(dev, "missing base address");
 		return ret;
 	}
 
-	npins = res[1] / PMIC_GPIO_ADDRESS_RANGE;
-
+	npins = of_irq_count(dev->of_node);
 	if (!npins)
 		return -EINVAL;
 
@@ -752,7 +752,7 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 		if (pad->irq < 0)
 			return pad->irq;
 
-		pad->base = res[0] + i * PMIC_GPIO_ADDRESS_RANGE;
+		pad->base = reg + i * PMIC_GPIO_ADDRESS_RANGE;
 
 		ret = pmic_gpio_populate(state, pad);
 		if (ret < 0)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 9ce0e30e33e8..d778fb9c9dbf 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -14,6 +14,7 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinmux.h>
@@ -795,15 +796,15 @@ static int pmic_mpp_probe(struct platform_device *pdev)
 	struct pmic_mpp_pad *pad, *pads;
 	struct pmic_mpp_state *state;
 	int ret, npins, i;
-	u32 res[2];
+	u32 reg;
 
-	ret = of_property_read_u32_array(dev->of_node, "reg", res, 2);
+	ret = of_property_read_u32(dev->of_node, "reg", &reg);
 	if (ret < 0) {
-		dev_err(dev, "missing base address and/or range");
+		dev_err(dev, "missing base address");
 		return ret;
 	}
 
-	npins = res[1] / PMIC_MPP_ADDRESS_RANGE;
+	npins = of_irq_count(dev->of_node);
 	if (!npins)
 		return -EINVAL;
 
@@ -854,7 +855,7 @@ static int pmic_mpp_probe(struct platform_device *pdev)
 		if (pad->irq < 0)
 			return pad->irq;
 
-		pad->base = res[0] + i * PMIC_MPP_ADDRESS_RANGE;
+		pad->base = reg + i * PMIC_MPP_ADDRESS_RANGE;
 
 		ret = pmic_mpp_populate(state, pad);
 		if (ret < 0)
diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
index d809c9eaa323..78fa2281116d 100644
--- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
@@ -650,11 +651,12 @@ static int pm8xxx_pin_populate(struct pm8xxx_gpio *pctrl,
 }
 
 static const struct of_device_id pm8xxx_gpio_of_match[] = {
-	{ .compatible = "qcom,pm8018-gpio", .data = (void *)6 },
-	{ .compatible = "qcom,pm8038-gpio", .data = (void *)12 },
-	{ .compatible = "qcom,pm8058-gpio", .data = (void *)40 },
-	{ .compatible = "qcom,pm8917-gpio", .data = (void *)38 },
-	{ .compatible = "qcom,pm8921-gpio", .data = (void *)44 },
+	{ .compatible = "qcom,pm8018-gpio" },
+	{ .compatible = "qcom,pm8038-gpio" },
+	{ .compatible = "qcom,pm8058-gpio" },
+	{ .compatible = "qcom,pm8917-gpio" },
+	{ .compatible = "qcom,pm8921-gpio" },
+	{ .compatible = "qcom,ssbi-gpio" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_gpio_of_match);
@@ -672,7 +674,9 @@ static int pm8xxx_gpio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pctrl->dev = &pdev->dev;
-	pctrl->npins = (unsigned)of_device_get_match_data(&pdev->dev);
+	pctrl->npins = of_irq_count(pdev->dev.of_node);
+	if (!pctrl->npins)
+		return -EINVAL;
 
 	pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!pctrl->regmap) {
diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c b/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c
index 8982027de8e8..0831063da54c 100644
--- a/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c
@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
@@ -741,11 +742,12 @@ static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl,
 }
 
 static const struct of_device_id pm8xxx_mpp_of_match[] = {
-	{ .compatible = "qcom,pm8018-mpp", .data = (void *)6 },
-	{ .compatible = "qcom,pm8038-mpp", .data = (void *)6 },
-	{ .compatible = "qcom,pm8917-mpp", .data = (void *)10 },
-	{ .compatible = "qcom,pm8821-mpp", .data = (void *)4 },
-	{ .compatible = "qcom,pm8921-mpp", .data = (void *)12 },
+	{ .compatible = "qcom,pm8018-mpp" },
+	{ .compatible = "qcom,pm8038-mpp" },
+	{ .compatible = "qcom,pm8917-mpp" },
+	{ .compatible = "qcom,pm8821-mpp" },
+	{ .compatible = "qcom,pm8921-mpp" },
+	{ .compatible = "qcom,ssbi-mpp" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match);
@@ -763,7 +765,9 @@ static int pm8xxx_mpp_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pctrl->dev = &pdev->dev;
-	pctrl->npins = (unsigned)of_device_get_match_data(&pdev->dev);
+	pctrl->npins = of_irq_count(pdev->dev.of_node);
+	if (!pctrl->npins)
+		return -EINVAL;
 
 	pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!pctrl->regmap) {