diff options
| author | Georgi Djakov <gdjakov@mm-sol.com> | 2014-09-03 20:28:16 +0400 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2014-09-04 20:19:31 +0400 |
| commit | f712c554a7fca8f6308afbce844eacbf5e48787b (patch) | |
| tree | 967825a854c9eba91c242dd920e478dbf03594ff /drivers/pinctrl/qcom/pinctrl-msm.h | |
| parent | a9d490c5a8a05b1ff7d2d6fe5bf1053033788e76 (diff) | |
| download | linux-f712c554a7fca8f6308afbce844eacbf5e48787b.tar.xz | |
pinctrl: qcom: Make the target processor value configurable
Currently the value used to specify that interrupts from the gpio should
be routed to the application processor is hardcoded for all Qualcomm SoCs.
But the new APQ8084 SoC uses a different value. To resolve this, we make
this value configurable for each SoC. For all existing SoCs we continue
to use the current value, and only for APQ8084 we use the new value.
Suggested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/qcom/pinctrl-msm.h')
| -rw-r--r-- | drivers/pinctrl/qcom/pinctrl-msm.h | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h index 7b2a227a590a..b952c4b4a8e9 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.h +++ b/drivers/pinctrl/qcom/pinctrl-msm.h @@ -53,6 +53,8 @@ struct msm_function { * @intr_status_bit: Offset in @intr_status_reg for reading and acking the interrupt * status. * @intr_target_bit: Offset in @intr_target_reg for configuring the interrupt routing. + * @intr_target_kpss_val: Value in @intr_target_bit for specifying that the interrupt from + * this gpio should get routed to the KPSS processor. * @intr_raw_status_bit: Offset in @intr_cfg_reg for the raw status bit. * @intr_polarity_bit: Offset in @intr_cfg_reg for specifying polarity of the interrupt. * @intr_detection_bit: Offset in @intr_cfg_reg for specifying interrupt type. @@ -88,6 +90,7 @@ struct msm_pingroup { unsigned intr_ack_high:1; unsigned intr_target_bit:5; + unsigned intr_target_kpss_val:5; unsigned intr_raw_status_bit:5; unsigned intr_polarity_bit:5; unsigned intr_detection_bit:5; |