Merge tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.3 development
  cycle.

  Like with GPIO it's a lot of stuff.  If my subsystems are any sign of
  the overall tempo of the kernel v4.3 will be a gigantic diff.

[ It looks like 4.3 is calmer than 4.2 in most other subsystems, but
  we'll see - Linus ]

  Core changes:

   - It is possible configure groups in debugfs.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().  This series was
     created by Thomas Gleixner after the problem was observed by
     Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx also wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

  Driver feature enhancements:

   - Power management support for the SiRF SoC Atlas 7.

   - Power down support for the Qualcomm driver.

   - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks
     in IRQ handlers to play nice with the realtime patch set.

   - Rework and new modes handling for Qualcomm SPMI-MPP.

   - Pinconf power source config for SH PFC.

  New drivers and subdrivers:

   - A new driver for Conexant Digicolor CX92755.

   - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5,
     ProXtream2 and PH1-LD6b SoC pin control support.

   - Reverse-egineered the S/PDIF settings for the Allwinner sun4i
     driver.

   - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs

   - A new Freescale i.mx6ul subdriver.

  Cleanup:

   - Remove platform data support in a number of SH PFC subdrivers"

* tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits)
  pinctrl: at91: fix null pointer dereference
  pinctrl: mediatek: Implement wake handler and suspend resume
  pinctrl: mediatek: Fix multiple registration issue.
  pinctrl: sh-pfc: r8a7794: add USB pin groups
  pinctrl: at91: Use generic irq_{request,release}_resources()
  pinctrl: cherryview: Use raw_spinlock for locking
  pinctrl: baytrail: Use raw_spinlock for locking
  pinctrl: imx6ul: Remove .owner field
  pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
  pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
  clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks
  pinctrl: sun4i: add spdif to pin description.
  pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
  pinctrl: baytrail: Serialize all register access
  pinctrl: baytrail: Drop FSF mailing address
  pinctrl: rockchip: only enable gpio clock when it setting
  pinctrl/mediatek: fix spelling mistake in dev_err error message
  pinctrl: cherryview: Serialize all register access
  pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
  pinctrl: nomadik: reflect current input value
  ...

1 files changed, 50 insertions, 4 deletions

diff --git a/drivers/pinctrl/pinctrl-lpc18xx.c b/drivers/pinctrl/pinctrl-lpc18xx.c
index 347c763a6a78..f0bebbe0682b 100644
--- a/drivers/pinctrl/pinctrl-lpc18xx.c
+++ b/drivers/pinctrl/pinctrl-lpc18xx.c
@@ -37,6 +37,9 @@
 #define LPC18XX_SCU_PIN_EHD_MASK	0x300
 #define LPC18XX_SCU_PIN_EHD_POS		8
 
+#define LPC18XX_SCU_USB1_EPD		BIT(2)
+#define LPC18XX_SCU_USB1_EPWR		BIT(4)
+
 #define LPC18XX_SCU_I2C0_EFP		BIT(0)
 #define LPC18XX_SCU_I2C0_EHD		BIT(2)
 #define LPC18XX_SCU_I2C0_EZI		BIT(3)
@@ -617,8 +620,31 @@ static const struct pinctrl_pin_desc lpc18xx_pins[] = {
 
 static int lpc18xx_pconf_get_usb1(enum pin_config_param param, int *arg, u32 reg)
 {
-	/* TODO */
-	return -ENOTSUPP;
+	switch (param) {
+	case PIN_CONFIG_LOW_POWER_MODE:
+		if (reg & LPC18XX_SCU_USB1_EPWR)
+			*arg = 0;
+		else
+			*arg = 1;
+		break;
+
+	case PIN_CONFIG_BIAS_DISABLE:
+		if (reg & LPC18XX_SCU_USB1_EPD)
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		if (reg & LPC18XX_SCU_USB1_EPD)
+			*arg = 1;
+		else
+			return -EINVAL;
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
 }
 
 static int lpc18xx_pconf_get_i2c0(enum pin_config_param param, int *arg, u32 reg,
@@ -782,8 +808,28 @@ static int lpc18xx_pconf_set_usb1(struct pinctrl_dev *pctldev,
 				  enum pin_config_param param,
 				  u16 param_val, u32 *reg)
 {
-	/* TODO */
-	return -ENOTSUPP;
+	switch (param) {
+	case PIN_CONFIG_LOW_POWER_MODE:
+		if (param_val)
+			*reg &= ~LPC18XX_SCU_USB1_EPWR;
+		else
+			*reg |= LPC18XX_SCU_USB1_EPWR;
+		break;
+
+	case PIN_CONFIG_BIAS_DISABLE:
+		*reg &= ~LPC18XX_SCU_USB1_EPD;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		*reg |= LPC18XX_SCU_USB1_EPD;
+		break;
+
+	default:
+		dev_err(pctldev->dev, "Property not supported\n");
+		return -ENOTSUPP;
+	}
+
+	return 0;
 }
 
 static int lpc18xx_pconf_set_i2c0(struct pinctrl_dev *pctldev,