Merge branch 'pci/controller/j721e'

- Add DT "ti,syscon-acspcie-proxy-ctrl" and driver support to enable the
  ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli)

- Extract the cadence link setup from cdns_pcie_host_setup() so link setup
  can be done separately during resume (Thomas Richard)

- Use dev_err_probe() to simplify j721e probe (Thomas Richard)

- Add T_PERST_CLK_US definition for the mandatory delay between Refclk
  becoming stable and PERST# being deasserted (Thomas Richard)

- Add j721e suspend and resume support (Théo Lebrun)

* pci/controller/j721e:
  PCI: j721e: Add suspend and resume support
  PCI: j721e: Use T_PERST_CLK_US macro
  PCI: Add T_PERST_CLK_US macro
  PCI: j721e: Add reset GPIO to struct j721e_pcie
  PCI: j721e: Use dev_err_probe() in the probe() function
  PCI: cadence: Set cdns_pcie_host_init() global
  PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup()
  PCI: j721e: Enable ACSPCIE Refclk if "ti,syscon-acspcie-proxy-ctrl" exists
  dt-bindings: PCI: ti,j721e-pci-host: Add ACSPCIE proxy control property

4 files changed, 197 insertions, 36 deletions

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 85718246016b..284f2e0e4d26 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -7,6 +7,8 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/container_of.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/io.h>
@@ -22,6 +24,8 @@
 #include "../../pci.h"
 #include "pcie-cadence.h"
 
+#define cdns_pcie_to_rc(p) container_of(p, struct cdns_pcie_rc, pcie)
+
 #define ENABLE_REG_SYS_2	0x108
 #define STATUS_REG_SYS_2	0x508
 #define STATUS_CLR_REG_SYS_2	0x708
@@ -44,6 +48,7 @@ enum link_status {
 #define J721E_MODE_RC			BIT(7)
 #define LANE_COUNT(n)			((n) << 8)
 
+#define ACSPCIE_PAD_DISABLE_MASK	GENMASK(1, 0)
 #define GENERATION_SEL_MASK		GENMASK(1, 0)
 
 struct j721e_pcie {
@@ -52,6 +57,7 @@ struct j721e_pcie {
 	u32			mode;
 	u32			num_lanes;
 	u32			max_lanes;
+	struct gpio_desc	*reset_gpio;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -220,6 +226,36 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
 	return ret;
 }
 
+static int j721e_enable_acspcie_refclk(struct j721e_pcie *pcie,
+				       struct regmap *syscon)
+{
+	struct device *dev = pcie->cdns_pcie->dev;
+	struct device_node *node = dev->of_node;
+	u32 mask = ACSPCIE_PAD_DISABLE_MASK;
+	struct of_phandle_args args;
+	u32 val;
+	int ret;
+
+	ret = of_parse_phandle_with_fixed_args(node,
+					       "ti,syscon-acspcie-proxy-ctrl",
+					       1, 0, &args);
+	if (ret) {
+		dev_err(dev,
+			"ti,syscon-acspcie-proxy-ctrl has invalid arguments\n");
+		return ret;
+	}
+
+	/* Clear PAD IO disable bits to enable refclk output */
+	val = ~(args.args[0]);
+	ret = regmap_update_bits(syscon, 0, mask, val);
+	if (ret) {
+		dev_err(dev, "failed to enable ACSPCIE refclk: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 {
 	struct device *dev = pcie->cdns_pcie->dev;
@@ -259,7 +295,13 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 		return ret;
 	}
 
-	return 0;
+	/* Enable ACSPCIE refclk output if the optional property exists */
+	syscon = syscon_regmap_lookup_by_phandle_optional(node,
+						"ti,syscon-acspcie-proxy-ctrl");
+	if (!syscon)
+		return 0;
+
+	return j721e_enable_acspcie_refclk(pcie, syscon);
 }
 
 static int cdns_ti_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
@@ -482,20 +524,20 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync failed\n");
+		dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n");
 		goto err_get_sync;
 	}
 
 	ret = j721e_pcie_ctrl_init(pcie);
 	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync failed\n");
+		dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n");
 		goto err_get_sync;
 	}
 
 	ret = devm_request_irq(dev, irq, j721e_pcie_link_irq_handler, 0,
 			       "j721e-pcie-link-down-irq", pcie);
 	if (ret < 0) {
-		dev_err(dev, "failed to request link state IRQ %d\n", irq);
+		dev_err_probe(dev, ret, "failed to request link state IRQ %d\n", irq);
 		goto err_get_sync;
 	}
 
@@ -505,42 +547,40 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	case PCI_MODE_RC:
 		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 		if (IS_ERR(gpiod)) {
-			ret = PTR_ERR(gpiod);
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "Failed to get reset GPIO\n");
+			ret = dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get reset GPIO\n");
 			goto err_get_sync;
 		}
+		pcie->reset_gpio = gpiod;
 
 		ret = cdns_pcie_init_phy(dev, cdns_pcie);
 		if (ret) {
-			dev_err(dev, "Failed to init phy\n");
+			dev_err_probe(dev, ret, "Failed to init phy\n");
 			goto err_get_sync;
 		}
 
 		clk = devm_clk_get_optional(dev, "pcie_refclk");
 		if (IS_ERR(clk)) {
-			ret = PTR_ERR(clk);
-			dev_err(dev, "failed to get pcie_refclk\n");
+			ret = dev_err_probe(dev, PTR_ERR(clk), "failed to get pcie_refclk\n");
 			goto err_pcie_setup;
 		}
 
 		ret = clk_prepare_enable(clk);
 		if (ret) {
-			dev_err(dev, "failed to enable pcie_refclk\n");
+			dev_err_probe(dev, ret, "failed to enable pcie_refclk\n");
 			goto err_pcie_setup;
 		}
 		pcie->refclk = clk;
 
 		/*
-		 * "Power Sequencing and Reset Signal Timings" table in
-		 * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 3.0
-		 * indicates PERST# should be deasserted after minimum of 100us
-		 * once REFCLK is stable. The REFCLK to the connector in RC
-		 * mode is selected while enabling the PHY. So deassert PERST#
-		 * after 100 us.
+		 * The "Power Sequencing and Reset Signal Timings" table of the
+		 * PCI Express Card Electromechanical Specification, Revision
+		 * 5.1, Section 2.9.2, Symbol "T_PERST-CLK", indicates PERST#
+		 * should be deasserted after minimum of 100us once REFCLK is
+		 * stable. The REFCLK to the connector in RC mode is selected
+		 * while enabling the PHY. So deassert PERST# after 100 us.
 		 */
 		if (gpiod) {
-			usleep_range(100, 200);
+			fsleep(PCIE_T_PERST_CLK_US);
 			gpiod_set_value_cansleep(gpiod, 1);
 		}
 
@@ -554,7 +594,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	case PCI_MODE_EP:
 		ret = cdns_pcie_init_phy(dev, cdns_pcie);
 		if (ret) {
-			dev_err(dev, "Failed to init phy\n");
+			dev_err_probe(dev, ret, "Failed to init phy\n");
 			goto err_get_sync;
 		}
 
@@ -589,6 +629,87 @@ static void j721e_pcie_remove(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 }
 
+static int j721e_pcie_suspend_noirq(struct device *dev)
+{
+	struct j721e_pcie *pcie = dev_get_drvdata(dev);
+
+	if (pcie->mode == PCI_MODE_RC) {
+		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+		clk_disable_unprepare(pcie->refclk);
+	}
+
+	cdns_pcie_disable_phy(pcie->cdns_pcie);
+
+	return 0;
+}
+
+static int j721e_pcie_resume_noirq(struct device *dev)
+{
+	struct j721e_pcie *pcie = dev_get_drvdata(dev);
+	struct cdns_pcie *cdns_pcie = pcie->cdns_pcie;
+	int ret;
+
+	ret = j721e_pcie_ctrl_init(pcie);
+	if (ret < 0)
+		return ret;
+
+	j721e_pcie_config_link_irq(pcie);
+
+	/*
+	 * This is not called explicitly in the probe, it is called by
+	 * cdns_pcie_init_phy().
+	 */
+	ret = cdns_pcie_enable_phy(pcie->cdns_pcie);
+	if (ret < 0)
+		return ret;
+
+	if (pcie->mode == PCI_MODE_RC) {
+		struct cdns_pcie_rc *rc = cdns_pcie_to_rc(cdns_pcie);
+
+		ret = clk_prepare_enable(pcie->refclk);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * The "Power Sequencing and Reset Signal Timings" table of the
+		 * PCI Express Card Electromechanical Specification, Revision
+		 * 5.1, Section 2.9.2, Symbol "T_PERST-CLK", indicates PERST#
+		 * should be deasserted after minimum of 100us once REFCLK is
+		 * stable. The REFCLK to the connector in RC mode is selected
+		 * while enabling the PHY. So deassert PERST# after 100 us.
+		 */
+		if (pcie->reset_gpio) {
+			fsleep(PCIE_T_PERST_CLK_US);
+			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+		}
+
+		ret = cdns_pcie_host_link_setup(rc);
+		if (ret < 0) {
+			clk_disable_unprepare(pcie->refclk);
+			return ret;
+		}
+
+		/*
+		 * Reset internal status of BARs to force reinitialization in
+		 * cdns_pcie_host_init().
+		 */
+		for (enum cdns_pcie_rp_bar bar = RP_BAR0; bar <= RP_NO_BAR; bar++)
+			rc->avail_ib_bar[bar] = true;
+
+		ret = cdns_pcie_host_init(rc);
+		if (ret) {
+			clk_disable_unprepare(pcie->refclk);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static DEFINE_NOIRQ_DEV_PM_OPS(j721e_pcie_pm_ops,
+			       j721e_pcie_suspend_noirq,
+			       j721e_pcie_resume_noirq);
+
 static struct platform_driver j721e_pcie_driver = {
 	.probe  = j721e_pcie_probe,
 	.remove_new = j721e_pcie_remove,
@@ -596,6 +717,7 @@ static struct platform_driver j721e_pcie_driver = {
 		.name	= "j721e-pcie",
 		.of_match_table = of_j721e_pcie_match,
 		.suppress_bind_attrs = true,
+		.pm	= pm_sleep_ptr(&j721e_pcie_pm_ops),
 	},
 };
 builtin_platform_driver(j721e_pcie_driver);
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 5b14f7ee3c79..8af95e9da7ce 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -485,8 +485,7 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
 	return cdns_pcie_host_map_dma_ranges(rc);
 }
 
-static int cdns_pcie_host_init(struct device *dev,
-			       struct cdns_pcie_rc *rc)
+int cdns_pcie_host_init(struct cdns_pcie_rc *rc)
 {
 	int err;
 
@@ -497,6 +496,30 @@ static int cdns_pcie_host_init(struct device *dev,
 	return cdns_pcie_host_init_address_translation(rc);
 }
 
+int cdns_pcie_host_link_setup(struct cdns_pcie_rc *rc)
+{
+	struct cdns_pcie *pcie = &rc->pcie;
+	struct device *dev = rc->pcie.dev;
+	int ret;
+
+	if (rc->quirk_detect_quiet_flag)
+		cdns_pcie_detect_quiet_min_delay_set(&rc->pcie);
+
+	cdns_pcie_host_enable_ptm_response(pcie);
+
+	ret = cdns_pcie_start_link(pcie);
+	if (ret) {
+		dev_err(dev, "Failed to start link\n");
+		return ret;
+	}
+
+	ret = cdns_pcie_host_start_link(rc);
+	if (ret)
+		dev_dbg(dev, "PCIe link never came up\n");
+
+	return 0;
+}
+
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 {
 	struct device *dev = rc->pcie.dev;
@@ -533,25 +556,14 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 		return PTR_ERR(rc->cfg_base);
 	rc->cfg_res = res;
 
-	if (rc->quirk_detect_quiet_flag)
-		cdns_pcie_detect_quiet_min_delay_set(&rc->pcie);
-
-	cdns_pcie_host_enable_ptm_response(pcie);
-
-	ret = cdns_pcie_start_link(pcie);
-	if (ret) {
-		dev_err(dev, "Failed to start link\n");
-		return ret;
-	}
-
-	ret = cdns_pcie_host_start_link(rc);
+	ret = cdns_pcie_host_link_setup(rc);
 	if (ret)
-		dev_dbg(dev, "PCIe link never came up\n");
+		return ret;
 
 	for (bar = RP_BAR0; bar <= RP_NO_BAR; bar++)
 		rc->avail_ib_bar[bar] = true;
 
-	ret = cdns_pcie_host_init(dev, rc);
+	ret = cdns_pcie_host_init(rc);
 	if (ret)
 		return ret;
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 9e6f602ac79f..f5eeff834ec1 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -520,10 +520,22 @@ static inline bool cdns_pcie_link_up(struct cdns_pcie *pcie)
 }
 
 #ifdef CONFIG_PCIE_CADENCE_HOST
+int cdns_pcie_host_link_setup(struct cdns_pcie_rc *rc);
+int cdns_pcie_host_init(struct cdns_pcie_rc *rc);
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc);
 void __iomem *cdns_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
 			       int where);
 #else
+static inline int cdns_pcie_host_link_setup(struct cdns_pcie_rc *rc)
+{
+	return 0;
+}
+
+static inline int cdns_pcie_host_init(struct cdns_pcie_rc *rc)
+{
+	return 0;
+}
+
 static inline int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 {
 	return 0;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 2f93ecec468b..c058f862ab08 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -13,10 +13,25 @@
 
 #define PCIE_LINK_RETRAIN_TIMEOUT_MS	1000
 
-/* Power stable to PERST# inactive from PCIe card Electromechanical Spec */
+/*
+ * Power stable to PERST# inactive.
+ *
+ * See the "Power Sequencing and Reset Signal Timings" table of the PCI Express
+ * Card Electromechanical Specification, Revision 5.1, Section 2.9.2, Symbol
+ * "T_PVPERL".
+ */
 #define PCIE_T_PVPERL_MS		100
 
 /*
+ * REFCLK stable before PERST# inactive.
+ *
+ * See the "Power Sequencing and Reset Signal Timings" table of the PCI Express
+ * Card Electromechanical Specification, Revision 5.1, Section 2.9.2, Symbol
+ * "T_PERST-CLK".
+ */
+#define PCIE_T_PERST_CLK_US		100
+
+/*
  * End of conventional reset (PERST# de-asserted) to first configuration
  * request (device able to respond with a "Request Retry Status" completion),
  * from PCIe r6.0, sec 6.6.1.