wl1271: add wl1271 driver files

This driver supports the wl1271 chipset from Texas Instruments based on the
WiLink(tm) 6.0 mobile platform.  Support for wl1273 should be relatively easy
to add.  This chipset is designed for embedded devices, with good powersaving
capabilities.  The wl1271 chipset is the successor of wl1251 and supports the
802.11b/g/n standards, but currently this driver supports only b/g.

More information about this chipset can be found here:
http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 813 insertions, 0 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
new file mode 100644
index 000000000000..2a4351ff54dc
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -0,0 +1,813 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+#include <linux/etherdevice.h>
+
+#include "wl1271.h"
+#include "wl1271_reg.h"
+#include "wl1271_spi.h"
+#include "wl1271_acx.h"
+#include "wl12xx_80211.h"
+#include "wl1271_cmd.h"
+
+/*
+ * send command to firmware
+ *
+ * @wl: wl struct
+ * @id: command id
+ * @buf: buffer containing the command, must work with dma
+ * @len: length of the buffer
+ */
+int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len)
+{
+	struct wl1271_cmd_header *cmd;
+	unsigned long timeout;
+	u32 intr;
+	int ret = 0;
+
+	cmd = buf;
+	cmd->id = id;
+	cmd->status = 0;
+
+	WARN_ON(len % 4 != 0);
+
+	wl1271_spi_mem_write(wl, wl->cmd_box_addr, buf, len);
+
+	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+	timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
+
+	intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
+		if (time_after(jiffies, timeout)) {
+			wl1271_error("command complete timeout");
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+		msleep(1);
+
+		intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	}
+
+	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+			   WL1271_ACX_INTR_CMD_COMPLETE);
+
+out:
+	return ret;
+}
+
+int wl1271_cmd_cal_channel_tune(struct wl1271 *wl)
+{
+	struct wl1271_cmd_cal_channel_tune *cmd;
+	int ret = 0;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->test.id = TEST_CMD_CHANNEL_TUNE;
+
+	cmd->band = WL1271_CHANNEL_TUNE_BAND_2_4;
+	/* set up any channel, 7 is in the middle of the range */
+	cmd->channel = 7;
+
+	ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
+	if (ret < 0)
+		wl1271_warning("TEST_CMD_CHANNEL_TUNE failed");
+
+	kfree(cmd);
+	return ret;
+}
+
+int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl)
+{
+	struct wl1271_cmd_cal_update_ref_point *cmd;
+	int ret = 0;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->test.id = TEST_CMD_UPDATE_PD_REFERENCE_POINT;
+
+	/* FIXME: still waiting for the correct values */
+	cmd->ref_power    = 0;
+	cmd->ref_detector = 0;
+
+	cmd->sub_band     = WL1271_PD_REFERENCE_POINT_BAND_B_G;
+
+	ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
+	if (ret < 0)
+		wl1271_warning("TEST_CMD_UPDATE_PD_REFERENCE_POINT failed");
+
+	kfree(cmd);
+	return ret;
+}
+
+int wl1271_cmd_cal_p2g(struct wl1271 *wl)
+{
+	struct wl1271_cmd_cal_p2g *cmd;
+	int ret = 0;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->test.id = TEST_CMD_P2G_CAL;
+
+	cmd->sub_band_mask = WL1271_CAL_P2G_BAND_B_G;
+
+	ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
+	if (ret < 0)
+		wl1271_warning("TEST_CMD_P2G_CAL failed");
+
+	kfree(cmd);
+	return ret;
+}
+
+int wl1271_cmd_cal(struct wl1271 *wl)
+{
+	/*
+	 * FIXME: we must make sure that we're not sleeping when calibration
+	 * is done
+	 */
+	int ret;
+
+	wl1271_notice("performing tx calibration");
+
+	ret = wl1271_cmd_cal_channel_tune(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1271_cmd_cal_update_ref_point(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1271_cmd_cal_p2g(wl);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval,
+		    u16 beacon_interval, u8 wait)
+{
+	static bool do_cal = true;
+	unsigned long timeout;
+	struct wl1271_cmd_join *join;
+	int ret, i;
+	u8 *bssid;
+
+	/* FIXME: remove when we get calibration from the factory */
+	if (do_cal) {
+		ret = wl1271_cmd_cal(wl);
+		if (ret < 0)
+			wl1271_warning("couldn't calibrate");
+		else
+			do_cal = false;
+	}
+
+
+	join = kzalloc(sizeof(*join), GFP_KERNEL);
+	if (!join) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wl1271_debug(DEBUG_CMD, "cmd join");
+
+	/* Reverse order BSSID */
+	bssid = (u8 *) &join->bssid_lsb;
+	for (i = 0; i < ETH_ALEN; i++)
+		bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+	join->rx_config_options = wl->rx_config;
+	join->rx_filter_options = wl->rx_filter;
+
+	join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+	join->beacon_interval = beacon_interval;
+	join->dtim_interval = dtim_interval;
+	join->bss_type = bss_type;
+	join->channel = wl->channel;
+	join->ssid_len = wl->ssid_len;
+	memcpy(join->ssid, wl->ssid, wl->ssid_len);
+	join->ctrl = WL1271_JOIN_CMD_CTRL_TX_FLUSH;
+
+	/* increment the session counter */
+	wl->session_counter++;
+	if (wl->session_counter >= SESSION_COUNTER_MAX)
+		wl->session_counter = 0;
+
+	join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET;
+
+
+	ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
+	if (ret < 0) {
+		wl1271_error("failed to initiate cmd join");
+		goto out_free;
+	}
+
+	timeout = msecs_to_jiffies(JOIN_TIMEOUT);
+
+	/*
+	 * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
+	 * simplify locking we just sleep instead, for now
+	 */
+	if (wait)
+		msleep(10);
+
+out_free:
+	kfree(join);
+
+out:
+	return ret;
+}
+
+/**
+ * send test command to firmware
+ *
+ * @wl: wl struct
+ * @buf: buffer containing the command, with all headers, must work with dma
+ * @len: length of the buffer
+ * @answer: is answer needed
+ */
+int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
+{
+	int ret;
+
+	wl1271_debug(DEBUG_CMD, "cmd test");
+
+	ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len);
+
+	if (ret < 0) {
+		wl1271_warning("TEST command failed");
+		return ret;
+	}
+
+	if (answer) {
+		struct wl1271_command *cmd_answer;
+
+		/*
+		 * The test command got in, we can read the answer.
+		 * The answer would be a wl1271_command, where the
+		 * parameter array contains the actual answer.
+		 */
+		wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+		cmd_answer = buf;
+
+		if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
+			wl1271_error("TEST command answer error: %d",
+				     cmd_answer->header.status);
+	}
+
+	return 0;
+}
+
+/**
+ * read acx from firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer for the response, including all headers, must work with dma
+ * @len: lenght of buf
+ */
+int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
+{
+	struct acx_header *acx = buf;
+	int ret;
+
+	wl1271_debug(DEBUG_CMD, "cmd interrogate");
+
+	acx->id = id;
+
+	/* payload length, does not include any headers */
+	acx->len = len - sizeof(*acx);
+
+	ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_error("INTERROGATE command failed");
+		goto out;
+	}
+
+	/* the interrogate command got in, we can read the answer */
+	wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, len);
+
+	acx = buf;
+	if (acx->cmd.status != CMD_STATUS_SUCCESS)
+		wl1271_error("INTERROGATE command error: %d",
+			     acx->cmd.status);
+
+out:
+	return ret;
+}
+
+/**
+ * write acx value to firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer containing acx, including all headers, must work with dma
+ * @len: length of buf
+ */
+int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len)
+{
+	struct acx_header *acx = buf;
+	int ret;
+
+	wl1271_debug(DEBUG_CMD, "cmd configure");
+
+	acx->id = id;
+
+	/* payload length, does not include any headers */
+	acx->len = len - sizeof(*acx);
+
+	ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len);
+	if (ret < 0) {
+		wl1271_warning("CONFIGURE command NOK");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable)
+{
+	struct cmd_enabledisable_path *cmd;
+	int ret;
+	u16 cmd_rx, cmd_tx;
+
+	wl1271_debug(DEBUG_CMD, "cmd data path");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->channel = channel;
+
+	if (enable) {
+		cmd_rx = CMD_ENABLE_RX;
+		cmd_tx = CMD_ENABLE_TX;
+	} else {
+		cmd_rx = CMD_DISABLE_RX;
+		cmd_tx = CMD_DISABLE_TX;
+	}
+
+	ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1271_error("rx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		goto out;
+	}
+
+	wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+	ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1271_error("tx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		return ret;
+	}
+
+	wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode)
+{
+	struct wl1271_cmd_ps_params *ps_params = NULL;
+	int ret = 0;
+
+	/* FIXME: this should be in ps.c */
+	ret = wl1271_acx_wake_up_conditions(wl, WAKE_UP_EVENT_DTIM_BITMAP,
+					    wl->listen_int);
+	if (ret < 0) {
+		wl1271_error("couldn't set wake up conditions");
+		goto out;
+	}
+
+	wl1271_debug(DEBUG_CMD, "cmd set ps mode");
+
+	ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
+	if (!ps_params) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ps_params->ps_mode = ps_mode;
+	ps_params->send_null_data = 1;
+	ps_params->retries = 5;
+	ps_params->hang_over_period = 128;
+	ps_params->null_data_rate = 1; /* 1 Mbps */
+
+	ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
+			      sizeof(*ps_params));
+	if (ret < 0) {
+		wl1271_error("cmd set_ps_mode failed");
+		goto out;
+	}
+
+out:
+	kfree(ps_params);
+	return ret;
+}
+
+int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
+			   size_t len)
+{
+	struct cmd_read_write_memory *cmd;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd read memory");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	WARN_ON(len > MAX_READ_SIZE);
+	len = min_t(size_t, len, MAX_READ_SIZE);
+
+	cmd->addr = addr;
+	cmd->size = len;
+
+	ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1271_error("read memory command failed: %d", ret);
+		goto out;
+	}
+
+	/* the read command got in, we can now read the answer */
+	wl1271_spi_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+
+	if (cmd->header.status != CMD_STATUS_SUCCESS)
+		wl1271_error("error in read command result: %d",
+			     cmd->header.status);
+
+	memcpy(answer, cmd->value, len);
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
+		    u8 active_scan, u8 high_prio, u8 num_channels,
+		    u8 probe_requests)
+{
+
+	struct wl1271_cmd_trigger_scan_to *trigger = NULL;
+	struct wl1271_cmd_scan *params = NULL;
+	int i, ret;
+	u16 scan_options = 0;
+
+	if (wl->scanning)
+		return -EINVAL;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+	params->params.rx_filter_options =
+		cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
+
+	if (!active_scan)
+		scan_options |= WL1271_SCAN_OPT_PASSIVE;
+	if (high_prio)
+		scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH;
+	params->params.scan_options = scan_options;
+
+	params->params.num_channels = num_channels;
+	params->params.num_probe_requests = probe_requests;
+	params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS);
+	params->params.tid_trigger = 0;
+	params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
+
+	for (i = 0; i < num_channels; i++) {
+		params->channels[i].min_duration =
+			cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
+		params->channels[i].max_duration =
+			cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
+		memset(&params->channels[i].bssid_lsb, 0xff, 4);
+		memset(&params->channels[i].bssid_msb, 0xff, 2);
+		params->channels[i].early_termination = 0;
+		params->channels[i].tx_power_att = WL1271_SCAN_CURRENT_TX_PWR;
+		params->channels[i].channel = i + 1;
+	}
+
+	if (len && ssid) {
+		params->params.ssid_len = len;
+		memcpy(params->params.ssid, ssid, len);
+	}
+
+	ret = wl1271_cmd_build_probe_req(wl, ssid, len);
+	if (ret < 0) {
+		wl1271_error("PROBE request template failed");
+		goto out;
+	}
+
+	trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
+	if (!trigger) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* disable the timeout */
+	trigger->timeout = 0;
+
+	ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
+			      sizeof(*trigger));
+	if (ret < 0) {
+		wl1271_error("trigger scan to failed for hw scan");
+		goto out;
+	}
+
+	wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
+
+	wl->scanning = true;
+
+	ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
+	if (ret < 0) {
+		wl1271_error("SCAN failed");
+		goto out;
+	}
+
+	wl1271_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
+
+	if (params->header.status != CMD_STATUS_SUCCESS) {
+		wl1271_error("Scan command error: %d",
+			     params->header.status);
+		wl->scanning = false;
+		ret = -EIO;
+		goto out;
+	}
+
+out:
+	kfree(params);
+	return ret;
+}
+
+int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
+			    void *buf, size_t buf_len)
+{
+	struct wl1271_cmd_template_set *cmd;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id);
+
+	WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE);
+	buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE);
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->len = cpu_to_le16(buf_len);
+	cmd->template_type = template_id;
+	cmd->enabled_rates = ACX_RATE_MASK_UNSPECIFIED;
+	cmd->short_retry_limit = ACX_RATE_RETRY_LIMIT;
+	cmd->long_retry_limit = ACX_RATE_RETRY_LIMIT;
+
+	if (buf)
+		memcpy(cmd->template_data, buf, buf_len);
+
+	ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1271_warning("cmd set_template failed: %d", ret);
+		goto out_free;
+	}
+
+out_free:
+	kfree(cmd);
+
+out:
+	return ret;
+}
+
+static int wl1271_build_basic_rates(char *rates)
+{
+	u8 index = 0;
+
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+
+	return index;
+}
+
+static int wl1271_build_extended_rates(char *rates)
+{
+	u8 index = 0;
+
+	rates[index++] = IEEE80211_OFDM_RATE_6MB;
+	rates[index++] = IEEE80211_OFDM_RATE_9MB;
+	rates[index++] = IEEE80211_OFDM_RATE_12MB;
+	rates[index++] = IEEE80211_OFDM_RATE_18MB;
+	rates[index++] = IEEE80211_OFDM_RATE_24MB;
+	rates[index++] = IEEE80211_OFDM_RATE_36MB;
+	rates[index++] = IEEE80211_OFDM_RATE_48MB;
+	rates[index++] = IEEE80211_OFDM_RATE_54MB;
+
+	return index;
+}
+
+int wl1271_cmd_build_null_data(struct wl1271 *wl)
+{
+	struct wl12xx_null_data_template template;
+
+	if (!is_zero_ether_addr(wl->bssid)) {
+		memcpy(template.header.da, wl->bssid, ETH_ALEN);
+		memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
+	} else {
+		memset(template.header.da, 0xff, ETH_ALEN);
+		memset(template.header.bssid, 0xff, ETH_ALEN);
+	}
+
+	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+	template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
+						IEEE80211_STYPE_NULLFUNC);
+
+	return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template,
+				       sizeof(template));
+
+}
+
+int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid)
+{
+	struct wl12xx_ps_poll_template template;
+
+	memcpy(template.bssid, wl->bssid, ETH_ALEN);
+	memcpy(template.ta, wl->mac_addr, ETH_ALEN);
+	template.aid = aid;
+	template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+
+	return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template,
+				       sizeof(template));
+
+}
+
+int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len)
+{
+	struct wl12xx_probe_req_template template;
+	struct wl12xx_ie_rates *rates;
+	char *ptr;
+	u16 size;
+
+	ptr = (char *)&template;
+	size = sizeof(struct ieee80211_header);
+
+	memset(template.header.da, 0xff, ETH_ALEN);
+	memset(template.header.bssid, 0xff, ETH_ALEN);
+	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+	template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+
+	/* IEs */
+	/* SSID */
+	template.ssid.header.id = WLAN_EID_SSID;
+	template.ssid.header.len = ssid_len;
+	if (ssid_len && ssid)
+		memcpy(template.ssid.ssid, ssid, ssid_len);
+	size += sizeof(struct wl12xx_ie_header) + ssid_len;
+	ptr += size;
+
+	/* Basic Rates */
+	rates = (struct wl12xx_ie_rates *)ptr;
+	rates->header.id = WLAN_EID_SUPP_RATES;
+	rates->header.len = wl1271_build_basic_rates(rates->rates);
+	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+	ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+	/* Extended rates */
+	rates = (struct wl12xx_ie_rates *)ptr;
+	rates->header.id = WLAN_EID_EXT_SUPP_RATES;
+	rates->header.len = wl1271_build_extended_rates(rates->rates);
+	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+	wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
+
+	return wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
+				       &template, size);
+}
+
+int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
+{
+	struct wl1271_cmd_set_keys *cmd;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id);
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->id = id;
+	cmd->key_action = KEY_SET_ID;
+	cmd->key_type = KEY_WEP;
+
+	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1271_warning("cmd set_default_wep_key failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+
+	return ret;
+}
+
+int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
+		       u8 key_size, const u8 *key, const u8 *addr)
+{
+	struct wl1271_cmd_set_keys *cmd;
+	int ret = 0;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	if (key_type != KEY_WEP)
+		memcpy(cmd->addr, addr, ETH_ALEN);
+
+	cmd->key_action = action;
+	cmd->key_size = key_size;
+	cmd->key_type = key_type;
+
+	/* we have only one SSID profile */
+	cmd->ssid_profile = 0;
+
+	cmd->id = id;
+
+	/* FIXME: this is from wl1251, needs to be checked */
+	if (key_type == KEY_TKIP) {
+		/*
+		 * We get the key in the following form:
+		 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
+		 * but the target is expecting:
+		 * TKIP - RX MIC - TX MIC
+		 */
+		memcpy(cmd->key, key, 16);
+		memcpy(cmd->key + 16, key + 24, 8);
+		memcpy(cmd->key + 24, key + 16, 8);
+
+	} else {
+		memcpy(cmd->key, key, key_size);
+	}
+
+	wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd));
+
+	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1271_warning("could not set keys");
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+
+	return ret;
+}