Merge tag 'wireless-drivers-next-for-davem-2018-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.16

Major changes:

wil6210

* add PCI device id for Talyn

* support flashless device

ath9k

* improve RSSI/signal accuracy on AR9003 series

mt76

* validate CCMP PN from received frames to avoid replay attacks

qtnfmac

* support 64-bit network stats

* report more hardware information to kernel log and some via ethtool
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 81 insertions, 9 deletions

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 2ab71bb32327..b31e2514f8c2 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -70,23 +71,23 @@ MODULE_PARM_DESC(led_id,
  * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing
  * AHB addresses starting from 0x880000
  *
- * Internally, firmware uses addresses that allows faster access but
+ * Internally, firmware uses addresses that allow faster access but
  * are invisible from the host. To read from these addresses, alternative
  * AHB address must be used.
- *
- * Memory mapping
- * Linker address         PCI/Host address
- *                        0x880000 .. 0xa80000  2Mb BAR0
- * 0x800000 .. 0x807000   0x900000 .. 0x907000  28k DCCM
- * 0x840000 .. 0x857000   0x908000 .. 0x91f000  92k PERIPH
  */
 
 /**
- * @fw_mapping provides memory remapping table
+ * @sparrow_fw_mapping provides memory remapping table for sparrow
  *
  * array size should be in sync with the declaration in the wil6210.h
+ *
+ * Sparrow memory mapping:
+ * Linker address         PCI/Host address
+ *                        0x880000 .. 0xa80000  2Mb BAR0
+ * 0x800000 .. 0x808000   0x900000 .. 0x908000  32k DCCM
+ * 0x840000 .. 0x860000   0x908000 .. 0x928000  128k PERIPH
  */
-const struct fw_map fw_mapping[] = {
+const struct fw_map sparrow_fw_mapping[] = {
 	/* FW code RAM 256k */
 	{0x000000, 0x040000, 0x8c0000, "fw_code", true},
 	/* FW data RAM 32k */
@@ -112,6 +113,59 @@ const struct fw_map fw_mapping[] = {
 	{0x800000, 0x804000, 0x940000, "uc_data", false},
 };
 
+/**
+ * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0
+ * it is a bit larger to support extra features
+ */
+const struct fw_map sparrow_d0_mac_rgf_ext = {
+	0x88c000, 0x88c500, 0x88c000, "mac_rgf_ext", true
+};
+
+/**
+ * @talyn_fw_mapping provides memory remapping table for Talyn
+ *
+ * array size should be in sync with the declaration in the wil6210.h
+ *
+ * Talyn memory mapping:
+ * Linker address         PCI/Host address
+ *                        0x880000 .. 0xc80000  4Mb BAR0
+ * 0x800000 .. 0x820000   0xa00000 .. 0xa20000  128k DCCM
+ * 0x840000 .. 0x858000   0xa20000 .. 0xa38000  96k PERIPH
+ */
+const struct fw_map talyn_fw_mapping[] = {
+	/* FW code RAM 1M */
+	{0x000000, 0x100000, 0x900000, "fw_code", true},
+	/* FW data RAM 128k */
+	{0x800000, 0x820000, 0xa00000, "fw_data", true},
+	/* periph. data RAM 96k */
+	{0x840000, 0x858000, 0xa20000, "fw_peri", true},
+	/* various RGF 40k */
+	{0x880000, 0x88a000, 0x880000, "rgf", true},
+	/* AGC table 4k */
+	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true},
+	/* Pcie_ext_rgf 4k */
+	{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true},
+	/* mac_ext_rgf 1344b */
+	{0x88c000, 0x88c540, 0x88c000, "mac_rgf_ext", true},
+	/* ext USER RGF 4k */
+	{0x88d000, 0x88e000, 0x88d000, "ext_user_rgf", true},
+	/* OTP 4k */
+	{0x8a0000, 0x8a1000, 0x8a0000, "otp", true},
+	/* DMA EXT RGF 64k */
+	{0x8b0000, 0x8c0000, 0x8b0000, "dma_ext_rgf", true},
+	/* upper area 1536k */
+	{0x900000, 0xa80000, 0x900000, "upper", true},
+	/* UCODE areas - accessible by debugfs blobs but not by
+	 * wmi_addr_remap. UCODE areas MUST be added AFTER FW areas!
+	 */
+	/* ucode code RAM 256k */
+	{0x000000, 0x040000, 0xa38000, "uc_code", false},
+	/* ucode data RAM 32k */
+	{0x800000, 0x808000, 0xa78000, "uc_data", false},
+};
+
+struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
+
 struct blink_on_off_time led_blink_time[] = {
 	{WIL_LED_BLINK_ON_SLOW_MS, WIL_LED_BLINK_OFF_SLOW_MS},
 	{WIL_LED_BLINK_ON_MED_MS, WIL_LED_BLINK_OFF_MED_MS},
@@ -139,6 +193,24 @@ static u32 wmi_addr_remap(u32 x)
 }
 
 /**
+ * find fw_mapping entry by section name
+ * @section - section name
+ *
+ * Return pointer to section or NULL if not found
+ */
+struct fw_map *wil_find_fw_mapping(const char *section)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(fw_mapping); i++)
+		if (fw_mapping[i].name &&
+		    !strcmp(section, fw_mapping[i].name))
+			return &fw_mapping[i];
+
+	return NULL;
+}
+
+/**
  * Check address validity for WMI buffer; remap if needed
  * @ptr - internal (linker) fw/ucode address
  * @size - if non zero, validate the block does not