diff options
| author | Tamizh chelvam <c_traja@qti.qualcomm.com> | 2017-02-23 16:18:22 +0300 |
|---|---|---|
| committer | Kalle Valo <kvalo@qca.qualcomm.com> | 2017-03-16 11:53:49 +0300 |
| commit | 523f6701dbabbe63b35d16bb676d35212b22e204 (patch) | |
| tree | 92ca6ff1130b6ca02c3201d2450cc304f2b07c3f /drivers/net/wireless/ath/ath10k/mac.c | |
| parent | ca07baab0b1e627ae1d4a55d190fb1c9d32a3445 (diff) | |
| download | linux-523f6701dbabbe63b35d16bb676d35212b22e204.tar.xz | |
ath10k: update available channel list for 5G radio
If a 5 GHz radio is calibrated for operation in both
the low band (channels 36 to 64) and high band(channels 100 to 169),
hardware allows operations in all the listed channels. However,
if the chip has been calibrated only for the low/high band and
a high/low band channel is configured, due to lack of calibration
there will be potentially invalid signal on those non calibrated channels.
To avoid this problem this patch sets IEEE80211_CHAN_DISABLED flag for
those non calibrated channels by using low_5ghz_chan and high_5ghz_chan
values which we get from target through wmi service ready event.
Driver initialized flags are getting re initialized in handle_channel
in cfg80211. So calling the function to disable the non supported channel
from reg_notifier().
Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/mac.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/mac.c | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index f0e46804ad82..167bde5cbbad 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3126,6 +3126,21 @@ static void ath10k_regd_update(struct ath10k *ar) ath10k_warn(ar, "failed to set pdev regdomain: %d\n", ret); } +void ath10k_mac_update_channel_list(struct ath10k *ar, + struct ieee80211_supported_band *band) +{ + int i; + + if (ar->low_5ghz_chan && ar->high_5ghz_chan) { + for (i = 0; i < band->n_channels; i++) { + if (band->channels[i].center_freq < ar->low_5ghz_chan || + band->channels[i].center_freq > ar->high_5ghz_chan) + band->channels[i].flags |= + IEEE80211_CHAN_DISABLED; + } + } +} + static void ath10k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) { @@ -3149,6 +3164,10 @@ static void ath10k_reg_notifier(struct wiphy *wiphy, if (ar->state == ATH10K_STATE_ON) ath10k_regd_update(ar); mutex_unlock(&ar->conf_mutex); + + if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) + ath10k_mac_update_channel_list(ar, + ar->hw->wiphy->bands[NL80211_BAND_5GHZ]); } /***************/ |