Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 562 insertions, 0 deletions

diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
new file mode 100644
index 000000000000..cd32751b64eb
--- /dev/null
+++ b/drivers/net/wan/n2.c
@@ -0,0 +1,562 @@
+/*
+ * SDL Inc. RISCom/N2 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 1998-2003 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * For information see http://hq.pm.waw.pl/hdlc/
+ *
+ * Note: integrated CSU/DSU/DDS are not supported by this driver
+ *
+ * Sources of information:
+ *    Hitachi HD64570 SCA User's Manual
+ *    SDL Inc. PPP/HDLC/CISCO driver
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <asm/io.h>
+#include "hd64570.h"
+
+
+static const char* version = "SDL RISCom/N2 driver version: 1.15";
+static const char* devname = "RISCom/N2";
+
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
+#define USE_WINDOWSIZE 16384
+#define USE_BUS16BITS 1
+#define CLOCK_BASE 9830400	/* 9.8304 MHz */
+#define MAX_PAGES      16	/* 16 RAM pages at max */
+#define MAX_RAM_SIZE 0x80000	/* 512 KB */
+#if MAX_RAM_SIZE > MAX_PAGES * USE_WINDOWSIZE
+#undef MAX_RAM_SIZE
+#define MAX_RAM_SIZE (MAX_PAGES * USE_WINDOWSIZE)
+#endif
+#define N2_IOPORTS 0x10
+#define NEED_DETECT_RAM
+#define NEED_SCA_MSCI_INTR
+#define MAX_TX_BUFFERS 10
+
+static char *hw = NULL;	/* pointer to hw=xxx command line string */
+
+/* RISCom/N2 Board Registers */
+
+/* PC Control Register */
+#define N2_PCR 0
+#define PCR_RUNSCA 1     /* Run 64570 */
+#define PCR_VPM    2     /* Enable VPM - needed if using RAM above 1 MB */
+#define PCR_ENWIN  4     /* Open window */
+#define PCR_BUS16  8     /* 16-bit bus */
+
+
+/* Memory Base Address Register */
+#define N2_BAR 2
+
+
+/* Page Scan Register  */
+#define N2_PSR 4
+#define WIN16K       0x00
+#define WIN32K       0x20
+#define WIN64K       0x40
+#define PSR_WINBITS  0x60
+#define PSR_DMAEN    0x80
+#define PSR_PAGEBITS 0x0F
+
+
+/* Modem Control Reg */
+#define N2_MCR 6
+#define CLOCK_OUT_PORT1 0x80
+#define CLOCK_OUT_PORT0 0x40
+#define TX422_PORT1     0x20
+#define TX422_PORT0     0x10
+#define DSR_PORT1       0x08
+#define DSR_PORT0       0x04
+#define DTR_PORT1       0x02
+#define DTR_PORT0       0x01
+
+
+typedef struct port_s {
+	struct net_device *dev;
+	struct card_s *card;
+	spinlock_t lock;	/* TX lock */
+	sync_serial_settings settings;
+	int valid;		/* port enabled */
+	int rxpart;		/* partial frame received, next frame invalid*/
+	unsigned short encoding;
+	unsigned short parity;
+	u16 rxin;		/* rx ring buffer 'in' pointer */
+	u16 txin;		/* tx ring buffer 'in' and 'last' pointers */
+	u16 txlast;
+	u8 rxs, txs, tmc;	/* SCA registers */
+	u8 phy_node;		/* physical port # - 0 or 1 */
+	u8 log_node;		/* logical port # */
+}port_t;
+
+
+
+typedef struct card_s {
+	u8 __iomem *winbase;		/* ISA window base address */
+	u32 phy_winbase;	/* ISA physical base address */
+	u32 ram_size;		/* number of bytes */
+	u16 io;			/* IO Base address */
+	u16 buff_offset;	/* offset of first buffer of first channel */
+	u16 rx_ring_buffers;	/* number of buffers in a ring */
+	u16 tx_ring_buffers;
+	u8 irq;			/* IRQ (3-15) */
+
+	port_t ports[2];
+	struct card_s *next_card;
+}card_t;
+
+
+static card_t *first_card;
+static card_t **new_card = &first_card;
+
+
+#define sca_reg(reg, card) (0x8000 | (card)->io | \
+			    ((reg) & 0x0F) | (((reg) & 0xF0) << 6))
+#define sca_in(reg, card)		inb(sca_reg(reg, card))
+#define sca_out(value, reg, card)	outb(value, sca_reg(reg, card))
+#define sca_inw(reg, card)		inw(sca_reg(reg, card))
+#define sca_outw(value, reg, card)	outw(value, sca_reg(reg, card))
+
+#define port_to_card(port)		((port)->card)
+#define log_node(port)			((port)->log_node)
+#define phy_node(port)			((port)->phy_node)
+#define winsize(card)			(USE_WINDOWSIZE)
+#define winbase(card)      	     	((card)->winbase)
+#define get_port(card, port)		((card)->ports[port].valid ? \
+					 &(card)->ports[port] : NULL)
+
+
+
+static __inline__ u8 sca_get_page(card_t *card)
+{
+	return inb(card->io + N2_PSR) & PSR_PAGEBITS;
+}
+
+
+static __inline__ void openwin(card_t *card, u8 page)
+{
+	u8 psr = inb(card->io + N2_PSR);
+	outb((psr & ~PSR_PAGEBITS) | page, card->io + N2_PSR);
+}
+
+
+
+#include "hd6457x.c"
+
+
+
+static void n2_set_iface(port_t *port)
+{
+	card_t *card = port->card;
+	int io = card->io;
+	u8 mcr = inb(io + N2_MCR);
+	u8 msci = get_msci(port);
+	u8 rxs = port->rxs & CLK_BRG_MASK;
+	u8 txs = port->txs & CLK_BRG_MASK;
+
+	switch(port->settings.clock_type) {
+	case CLOCK_INT:
+		mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
+		rxs |= CLK_BRG_RX; /* BRG output */
+		txs |= CLK_RXCLK_TX; /* RX clock */
+		break;
+
+	case CLOCK_TXINT:
+		mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
+		rxs |= CLK_LINE_RX; /* RXC input */
+		txs |= CLK_BRG_TX; /* BRG output */
+		break;
+
+	case CLOCK_TXFROMRX:
+		mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
+		rxs |= CLK_LINE_RX; /* RXC input */
+		txs |= CLK_RXCLK_TX; /* RX clock */
+		break;
+
+	default:		/* Clock EXTernal */
+		mcr &= port->phy_node ? ~CLOCK_OUT_PORT1 : ~CLOCK_OUT_PORT0;
+		rxs |= CLK_LINE_RX; /* RXC input */
+		txs |= CLK_LINE_TX; /* TXC input */
+	}
+
+	outb(mcr, io + N2_MCR);
+	port->rxs = rxs;
+	port->txs = txs;
+	sca_out(rxs, msci + RXS, card);
+	sca_out(txs, msci + TXS, card);
+	sca_set_port(port);
+}
+
+
+
+static int n2_open(struct net_device *dev)
+{
+	port_t *port = dev_to_port(dev);
+	int io = port->card->io;
+	u8 mcr = inb(io + N2_MCR) | (port->phy_node ? TX422_PORT1:TX422_PORT0);
+	int result;
+
+	result = hdlc_open(dev);
+	if (result)
+		return result;
+
+	mcr &= port->phy_node ? ~DTR_PORT1 : ~DTR_PORT0; /* set DTR ON */
+	outb(mcr, io + N2_MCR);
+
+	outb(inb(io + N2_PCR) | PCR_ENWIN, io + N2_PCR); /* open window */
+	outb(inb(io + N2_PSR) | PSR_DMAEN, io + N2_PSR); /* enable dma */
+	sca_open(dev);
+	n2_set_iface(port);
+	return 0;
+}
+
+
+
+static int n2_close(struct net_device *dev)
+{
+	port_t *port = dev_to_port(dev);
+	int io = port->card->io;
+	u8 mcr = inb(io+N2_MCR) | (port->phy_node ? TX422_PORT1 : TX422_PORT0);
+
+	sca_close(dev);
+	mcr |= port->phy_node ? DTR_PORT1 : DTR_PORT0; /* set DTR OFF */
+	outb(mcr, io + N2_MCR);
+	hdlc_close(dev);
+	return 0;
+}
+
+
+
+static int n2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings new_line;
+	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+	port_t *port = dev_to_port(dev);
+
+#ifdef DEBUG_RINGS
+	if (cmd == SIOCDEVPRIVATE) {
+		sca_dump_rings(dev);
+		return 0;
+	}
+#endif
+	if (cmd != SIOCWANDEV)
+		return hdlc_ioctl(dev, ifr, cmd);
+
+	switch(ifr->ifr_settings.type) {
+	case IF_GET_IFACE:
+		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+		if (ifr->ifr_settings.size < size) {
+			ifr->ifr_settings.size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+		if (copy_to_user(line, &port->settings, size))
+			return -EFAULT;
+		return 0;
+
+	case IF_IFACE_SYNC_SERIAL:
+		if(!capable(CAP_NET_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&new_line, line, size))
+			return -EFAULT;
+
+		if (new_line.clock_type != CLOCK_EXT &&
+		    new_line.clock_type != CLOCK_TXFROMRX &&
+		    new_line.clock_type != CLOCK_INT &&
+		    new_line.clock_type != CLOCK_TXINT)
+		return -EINVAL;	/* No such clock setting */
+
+		if (new_line.loopback != 0 && new_line.loopback != 1)
+			return -EINVAL;
+
+		memcpy(&port->settings, &new_line, size); /* Update settings */
+		n2_set_iface(port);
+		return 0;
+
+	default:
+		return hdlc_ioctl(dev, ifr, cmd);
+	}
+}
+
+
+
+static void n2_destroy_card(card_t *card)
+{
+	int cnt;
+
+	for (cnt = 0; cnt < 2; cnt++)
+		if (card->ports[cnt].card) {
+			struct net_device *dev = port_to_dev(&card->ports[cnt]);
+			unregister_hdlc_device(dev);
+		}
+
+	if (card->irq)
+		free_irq(card->irq, card);
+
+	if (card->winbase) {
+		iounmap(card->winbase);
+		release_mem_region(card->phy_winbase, USE_WINDOWSIZE);
+	}
+
+	if (card->io)
+		release_region(card->io, N2_IOPORTS);
+	if (card->ports[0].dev)
+		free_netdev(card->ports[0].dev);
+	if (card->ports[1].dev)
+		free_netdev(card->ports[1].dev);
+	kfree(card);
+}
+
+
+
+static int __init n2_run(unsigned long io, unsigned long irq,
+			 unsigned long winbase, long valid0, long valid1)
+{
+	card_t *card;
+	u8 cnt, pcr;
+	int i;
+
+	if (io < 0x200 || io > 0x3FF || (io % N2_IOPORTS) != 0) {
+		printk(KERN_ERR "n2: invalid I/O port value\n");
+		return -ENODEV;
+	}
+
+	if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
+		printk(KERN_ERR "n2: invalid IRQ value\n");
+		return -ENODEV;
+	}
+
+	if (winbase < 0xA0000 || winbase > 0xFFFFF || (winbase & 0xFFF) != 0) {
+		printk(KERN_ERR "n2: invalid RAM value\n");
+		return -ENODEV;
+	}
+
+	card = kmalloc(sizeof(card_t), GFP_KERNEL);
+	if (card == NULL) {
+		printk(KERN_ERR "n2: unable to allocate memory\n");
+		return -ENOBUFS;
+	}
+	memset(card, 0, sizeof(card_t));
+
+	card->ports[0].dev = alloc_hdlcdev(&card->ports[0]);
+	card->ports[1].dev = alloc_hdlcdev(&card->ports[1]);
+	if (!card->ports[0].dev || !card->ports[1].dev) {
+		printk(KERN_ERR "n2: unable to allocate memory\n");
+		n2_destroy_card(card);
+		return -ENOMEM;
+	}
+
+	if (!request_region(io, N2_IOPORTS, devname)) {
+		printk(KERN_ERR "n2: I/O port region in use\n");
+		n2_destroy_card(card);
+		return -EBUSY;
+	}
+	card->io = io;
+
+	if (request_irq(irq, &sca_intr, 0, devname, card)) {
+		printk(KERN_ERR "n2: could not allocate IRQ\n");
+		n2_destroy_card(card);
+		return(-EBUSY);
+	}
+	card->irq = irq;
+
+	if (!request_mem_region(winbase, USE_WINDOWSIZE, devname)) {
+		printk(KERN_ERR "n2: could not request RAM window\n");
+		n2_destroy_card(card);
+		return(-EBUSY);
+	}
+	card->phy_winbase = winbase;
+	card->winbase = ioremap(winbase, USE_WINDOWSIZE);
+
+	outb(0, io + N2_PCR);
+	outb(winbase >> 12, io + N2_BAR);
+
+	switch (USE_WINDOWSIZE) {
+	case 16384:
+		outb(WIN16K, io + N2_PSR);
+		break;
+
+	case 32768:
+		outb(WIN32K, io + N2_PSR);
+		break;
+
+	case 65536:
+		outb(WIN64K, io + N2_PSR);
+		break;
+
+	default:
+		printk(KERN_ERR "n2: invalid window size\n");
+		n2_destroy_card(card);
+		return -ENODEV;
+	}
+
+	pcr = PCR_ENWIN | PCR_VPM | (USE_BUS16BITS ? PCR_BUS16 : 0);
+	outb(pcr, io + N2_PCR);
+
+	card->ram_size = sca_detect_ram(card, card->winbase, MAX_RAM_SIZE);
+
+	/* number of TX + RX buffers for one port */
+	i = card->ram_size / ((valid0 + valid1) * (sizeof(pkt_desc) +
+						   HDLC_MAX_MRU));
+
+	card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
+	card->rx_ring_buffers = i - card->tx_ring_buffers;
+
+	card->buff_offset = (valid0 + valid1) * sizeof(pkt_desc) *
+		(card->tx_ring_buffers + card->rx_ring_buffers);
+
+	printk(KERN_INFO "n2: RISCom/N2 %u KB RAM, IRQ%u, "
+	       "using %u TX + %u RX packets rings\n", card->ram_size / 1024,
+	       card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+
+	if (card->tx_ring_buffers < 1) {
+		printk(KERN_ERR "n2: RAM test failed\n");
+		n2_destroy_card(card);
+		return -EIO;
+	}
+
+	pcr |= PCR_RUNSCA;		/* run SCA */
+	outb(pcr, io + N2_PCR);
+	outb(0, io + N2_MCR);
+
+	sca_init(card, 0);
+	for (cnt = 0; cnt < 2; cnt++) {
+		port_t *port = &card->ports[cnt];
+		struct net_device *dev = port_to_dev(port);
+		hdlc_device *hdlc = dev_to_hdlc(dev);
+
+		if ((cnt == 0 && !valid0) || (cnt == 1 && !valid1))
+			continue;
+
+		port->phy_node = cnt;
+		port->valid = 1;
+
+		if ((cnt == 1) && valid0)
+			port->log_node = 1;
+
+		spin_lock_init(&port->lock);
+		SET_MODULE_OWNER(dev);
+		dev->irq = irq;
+		dev->mem_start = winbase;
+		dev->mem_end = winbase + USE_WINDOWSIZE - 1;
+		dev->tx_queue_len = 50;
+		dev->do_ioctl = n2_ioctl;
+		dev->open = n2_open;
+		dev->stop = n2_close;
+		hdlc->attach = sca_attach;
+		hdlc->xmit = sca_xmit;
+		port->settings.clock_type = CLOCK_EXT;
+		port->card = card;
+
+		if (register_hdlc_device(dev)) {
+			printk(KERN_WARNING "n2: unable to register hdlc "
+			       "device\n");
+			port->card = NULL;
+			n2_destroy_card(card);
+			return -ENOBUFS;
+		}
+		sca_init_sync_port(port); /* Set up SCA memory */
+
+		printk(KERN_INFO "%s: RISCom/N2 node %d\n",
+		       dev->name, port->phy_node);
+	}
+
+	*new_card = card;
+	new_card = &card->next_card;
+
+	return 0;
+}
+
+
+
+static int __init n2_init(void)
+{
+	if (hw==NULL) {
+#ifdef MODULE
+		printk(KERN_INFO "n2: no card initialized\n");
+#endif
+		return -ENOSYS;	/* no parameters specified, abort */
+	}
+
+	printk(KERN_INFO "%s\n", version);
+
+	do {
+		unsigned long io, irq, ram;
+		long valid[2] = { 0, 0 }; /* Default = both ports disabled */
+
+		io = simple_strtoul(hw, &hw, 0);
+
+		if (*hw++ != ',')
+			break;
+		irq = simple_strtoul(hw, &hw, 0);
+
+		if (*hw++ != ',')
+			break;
+		ram = simple_strtoul(hw, &hw, 0);
+
+		if (*hw++ != ',')
+			break;
+		while(1) {
+			if (*hw == '0' && !valid[0])
+				valid[0] = 1; /* Port 0 enabled */
+			else if (*hw == '1' && !valid[1])
+				valid[1] = 1; /* Port 1 enabled */
+			else
+				break;
+			hw++;
+		}
+
+		if (!valid[0] && !valid[1])
+			break;	/* at least one port must be used */
+
+		if (*hw == ':' || *hw == '\x0')
+			n2_run(io, irq, ram, valid[0], valid[1]);
+
+		if (*hw == '\x0')
+			return first_card ? 0 : -ENOSYS;
+	}while(*hw++ == ':');
+
+	printk(KERN_ERR "n2: invalid hardware parameters\n");
+	return first_card ? 0 : -ENOSYS;
+}
+
+
+static void __exit n2_cleanup(void)
+{
+	card_t *card = first_card;
+
+	while (card) {
+		card_t *ptr = card;
+		card = card->next_card;
+		n2_destroy_card(ptr);
+	}
+}
+
+
+module_init(n2_init);
+module_exit(n2_cleanup);
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("RISCom/N2 serial port driver");
+MODULE_LICENSE("GPL v2");
+module_param(hw, charp, 0444);	/* hw=io,irq,ram,ports:io,irq,... */