diff options
| author | Dasgupta, Romit <romit@ti.com> | 2008-11-06 13:16:18 +0300 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-11-11 11:53:15 +0300 |
| commit | 347c8d83cd9f546a8357e1ab12fa6867707975d8 (patch) | |
| tree | 249477b77857f558aebccc5e4b48932804303121 /drivers/net/smc911x.c | |
| parent | cf3760dad576c8dfb4fef4b8a8a08a027bf02583 (diff) | |
| download | linux-347c8d83cd9f546a8357e1ab12fa6867707975d8.tar.xz | |
[netdrvr] smc911x: fix for driver resume (and compilation warning)
I am trying out suspend, resume on an OMAP3 based board. What I see
during resume is that the SMC911x driver resume routing gets stuck
after trying to transmit the packet out of the controller. Some debug
messages below:
--> smc911x_drv_resume
eth0: --> smc911x_reset
eth0: smc911x_reset timeout waiting for PM restore
eth0: --> smc911x_enable
eth0: --> smc911x_phy_configure()
eth0: --> smc911x_phy_reset()
eth0: phy caps=0x782d
eth0: phy advertised caps=0x0de1
eth0: --> smc911x_phy_check_media
smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809
smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809
eth0: link down
Restarting tasks ... eth0: --> smc911x_hard_start_xmit
eth0: --> smc911x_hardware_send_pkt
eth0: --> smc911x_hard_start_xmit
eth0: --> smc911x_hardware_send_pkt
eth0: --> smc911x_hard_start_xmit
eth0: --> smc911x_hardware_send_pkt
nfs: server 172.24.190.217 not responding, still trying
nfs: server 172.24.190.217 not responding, still trying
The following change makes it work fine: (The change within
smc911x_drv_probe function was to get rid of a compilation warning).
Signed-off-by: Romit Dasgupta <romit@ti.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/smc911x.c')
| -rw-r--r-- | drivers/net/smc911x.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 5051554ff05b..1f26ab0e7986 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -2050,7 +2050,9 @@ err_out: */ static int smc911x_drv_probe(struct platform_device *pdev) { +#ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; +#endif struct net_device *ndev; struct resource *res; struct smc911x_local *lp; @@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev) if (netif_running(ndev)) { smc911x_reset(ndev); - smc911x_enable(ndev); if (lp->phy_type != 0) smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); netif_device_attach(ndev); } } |