Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "This set fixes a bunch of fallout from the changes that went in during
  this merge window, particularly:

   - Fix fsl_pq_mdio (Claudiu Manoil) and fm10k (Pranith Kumar) build
     failures.

   - Several networking drivers do atomic_set() on page counts where
     that's not exactly legal.  From Eric Dumazet.

   - Make __skb_flow_get_ports() work cleanly with unaligned data, from
     Alexander Duyck.

   - Fix some kernel-doc buglets in rfkill and netlabel, from Fabian
     Frederick.

   - Unbalanced enable_irq_wake usage in bcmgenet and systemport
     drivers, from Florian Fainelli.

   - pxa168_eth needs to depend on HAS_DMA, from Geert Uytterhoeven.

   - Multi-dequeue in the qdisc layer severely bypasses the fairness
     limits the previous code used to enforce, reintroduce in a way that
     at the same time doesn't compromise bulk dequeue opportunities.
     From Jesper Dangaard Brouer.

   - macvlan receive path unnecessarily hops through a softirq by using
     netif_rx() instead of netif_receive_skb().  From Jason Baron"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits)
  net: systemport: avoid unbalanced enable_irq_wake calls
  net: bcmgenet: avoid unbalanced enable_irq_wake calls
  net: bcmgenet: fix off-by-one in incrementing read pointer
  net: fix races in page->_count manipulation
  mlx4: fix race accessing page->_count
  ixgbe: fix race accessing page->_count
  igb: fix race accessing page->_count
  fm10k: fix race accessing page->_count
  net/phy: micrel: Add clock support for KSZ8021/KSZ8031
  flow-dissector: Fix alignment issue in __skb_flow_get_ports
  net: filter: fix the comments
  Documentation: replace __sk_run_filter with __bpf_prog_run
  macvlan: optimize the receive path
  macvlan: pass 'bool' type to macvlan_count_rx()
  drivers: net: xgene: Add 10GbE ethtool support
  drivers: net: xgene: Add 10GbE support
  drivers: net: xgene: Preparing for adding 10GbE support
  dtb: Add 10GbE node to APM X-Gene SoC device tree
  Documentation: dts: Update section header for APM X-Gene
  MAINTAINERS: Update APM X-Gene section
  ...

1 files changed, 29 insertions, 2 deletions

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 011dbda2b2f1..492435fce1d4 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -26,6 +26,7 @@
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
 #include <linux/of.h>
+#include <linux/clk.h>
 
 /* Operation Mode Strap Override */
 #define MII_KSZPHY_OMSO				0x16
@@ -72,9 +73,12 @@ static int ksz_config_flags(struct phy_device *phydev)
 {
 	int regval;
 
-	if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+	if (phydev->dev_flags & (MICREL_PHY_50MHZ_CLK | MICREL_PHY_25MHZ_CLK)) {
 		regval = phy_read(phydev, MII_KSZPHY_CTRL);
-		regval |= KSZ8051_RMII_50MHZ_CLK;
+		if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK)
+			regval |= KSZ8051_RMII_50MHZ_CLK;
+		else
+			regval &= ~KSZ8051_RMII_50MHZ_CLK;
 		return phy_write(phydev, MII_KSZPHY_CTRL, regval);
 	}
 	return 0;
@@ -440,6 +444,27 @@ ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
 {
 }
 
+static int ksz8021_probe(struct phy_device *phydev)
+{
+	struct clk *clk;
+
+	clk = devm_clk_get(&phydev->dev, "rmii-ref");
+	if (!IS_ERR(clk)) {
+		unsigned long rate = clk_get_rate(clk);
+
+		if (rate > 24500000 && rate < 25500000) {
+			phydev->dev_flags |= MICREL_PHY_25MHZ_CLK;
+		} else if (rate > 49500000 && rate < 50500000) {
+			phydev->dev_flags |= MICREL_PHY_50MHZ_CLK;
+		} else {
+			dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
 static struct phy_driver ksphy_driver[] = {
 {
 	.phy_id		= PHY_ID_KS8737,
@@ -462,6 +487,7 @@ static struct phy_driver ksphy_driver[] = {
 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
 			   SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.probe		= ksz8021_probe,
 	.config_init	= ksz8021_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
@@ -477,6 +503,7 @@ static struct phy_driver ksphy_driver[] = {
 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
 			   SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.probe		= ksz8021_probe,
 	.config_init	= ksz8021_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,