Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1493 insertions, 0 deletions

diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
new file mode 100644
index 000000000000..f3269b70a8c5
--- /dev/null
+++ b/drivers/net/hamradio/dmascc.c
@@ -0,0 +1,1493 @@
+/*
+ * Driver for high-speed SCC boards (those with DMA support)
+ * Copyright (C) 1997-2000 Klaus Kudielka
+ *
+ * S5SCC/DMA support by Janko Koleznik S52HI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/sockios.h>
+#include <linux/workqueue.h>
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <net/ax25.h>
+#include "z8530.h"
+
+
+/* Number of buffers per channel */
+
+#define NUM_TX_BUF      2	/* NUM_TX_BUF >= 1 (min. 2 recommended) */
+#define NUM_RX_BUF      6	/* NUM_RX_BUF >= 1 (min. 2 recommended) */
+#define BUF_SIZE        1576	/* BUF_SIZE >= mtu + hard_header_len */
+
+
+/* Cards supported */
+
+#define HW_PI           { "Ottawa PI", 0x300, 0x20, 0x10, 8, \
+                            0, 8, 1843200, 3686400 }
+#define HW_PI2          { "Ottawa PI2", 0x300, 0x20, 0x10, 8, \
+			    0, 8, 3686400, 7372800 }
+#define HW_TWIN         { "Gracilis PackeTwin", 0x200, 0x10, 0x10, 32, \
+			    0, 4, 6144000, 6144000 }
+#define HW_S5           { "S5SCC/DMA", 0x200, 0x10, 0x10, 32, \
+                          0, 8, 4915200, 9830400 }
+
+#define HARDWARE        { HW_PI, HW_PI2, HW_TWIN, HW_S5 }
+
+#define TMR_0_HZ        25600	/* Frequency of timer 0 */
+
+#define TYPE_PI         0
+#define TYPE_PI2        1
+#define TYPE_TWIN       2
+#define TYPE_S5         3
+#define NUM_TYPES       4
+
+#define MAX_NUM_DEVS    32
+
+
+/* SCC chips supported */
+
+#define Z8530           0
+#define Z85C30          1
+#define Z85230          2
+
+#define CHIPNAMES       { "Z8530", "Z85C30", "Z85230" }
+
+
+/* I/O registers */
+
+/* 8530 registers relative to card base */
+#define SCCB_CMD        0x00
+#define SCCB_DATA       0x01
+#define SCCA_CMD        0x02
+#define SCCA_DATA       0x03
+
+/* 8253/8254 registers relative to card base */
+#define TMR_CNT0        0x00
+#define TMR_CNT1        0x01
+#define TMR_CNT2        0x02
+#define TMR_CTRL        0x03
+
+/* Additional PI/PI2 registers relative to card base */
+#define PI_DREQ_MASK    0x04
+
+/* Additional PackeTwin registers relative to card base */
+#define TWIN_INT_REG    0x08
+#define TWIN_CLR_TMR1   0x09
+#define TWIN_CLR_TMR2   0x0a
+#define TWIN_SPARE_1    0x0b
+#define TWIN_DMA_CFG    0x08
+#define TWIN_SERIAL_CFG 0x09
+#define TWIN_DMA_CLR_FF 0x0a
+#define TWIN_SPARE_2    0x0b
+
+
+/* PackeTwin I/O register values */
+
+/* INT_REG */
+#define TWIN_SCC_MSK       0x01
+#define TWIN_TMR1_MSK      0x02
+#define TWIN_TMR2_MSK      0x04
+#define TWIN_INT_MSK       0x07
+
+/* SERIAL_CFG */
+#define TWIN_DTRA_ON       0x01
+#define TWIN_DTRB_ON       0x02
+#define TWIN_EXTCLKA       0x04
+#define TWIN_EXTCLKB       0x08
+#define TWIN_LOOPA_ON      0x10
+#define TWIN_LOOPB_ON      0x20
+#define TWIN_EI            0x80
+
+/* DMA_CFG */
+#define TWIN_DMA_HDX_T1    0x08
+#define TWIN_DMA_HDX_R1    0x0a
+#define TWIN_DMA_HDX_T3    0x14
+#define TWIN_DMA_HDX_R3    0x16
+#define TWIN_DMA_FDX_T3R1  0x1b
+#define TWIN_DMA_FDX_T1R3  0x1d
+
+
+/* Status values */
+
+#define IDLE      0
+#define TX_HEAD   1
+#define TX_DATA   2
+#define TX_PAUSE  3
+#define TX_TAIL   4
+#define RTS_OFF   5
+#define WAIT      6
+#define DCD_ON    7
+#define RX_ON     8
+#define DCD_OFF   9
+
+
+/* Ioctls */
+
+#define SIOCGSCCPARAM SIOCDEVPRIVATE
+#define SIOCSSCCPARAM (SIOCDEVPRIVATE+1)
+
+
+/* Data types */
+
+struct scc_param {
+	int pclk_hz;		/* frequency of BRG input (don't change) */
+	int brg_tc;		/* BRG terminal count; BRG disabled if < 0 */
+	int nrzi;		/* 0 (nrz), 1 (nrzi) */
+	int clocks;		/* see dmascc_cfg documentation */
+	int txdelay;		/* [1/TMR_0_HZ] */
+	int txtimeout;		/* [1/HZ] */
+	int txtail;		/* [1/TMR_0_HZ] */
+	int waittime;		/* [1/TMR_0_HZ] */
+	int slottime;		/* [1/TMR_0_HZ] */
+	int persist;		/* 1 ... 256 */
+	int dma;		/* -1 (disable), 0, 1, 3 */
+	int txpause;		/* [1/TMR_0_HZ] */
+	int rtsoff;		/* [1/TMR_0_HZ] */
+	int dcdon;		/* [1/TMR_0_HZ] */
+	int dcdoff;		/* [1/TMR_0_HZ] */
+};
+
+struct scc_hardware {
+	char *name;
+	int io_region;
+	int io_delta;
+	int io_size;
+	int num_devs;
+	int scc_offset;
+	int tmr_offset;
+	int tmr_hz;
+	int pclk_hz;
+};
+
+struct scc_priv {
+	int type;
+	int chip;
+	struct net_device *dev;
+	struct scc_info *info;
+	struct net_device_stats stats;
+	int channel;
+	int card_base, scc_cmd, scc_data;
+	int tmr_cnt, tmr_ctrl, tmr_mode;
+	struct scc_param param;
+	char rx_buf[NUM_RX_BUF][BUF_SIZE];
+	int rx_len[NUM_RX_BUF];
+	int rx_ptr;
+	struct work_struct rx_work;
+	int rx_head, rx_tail, rx_count;
+	int rx_over;
+	char tx_buf[NUM_TX_BUF][BUF_SIZE];
+	int tx_len[NUM_TX_BUF];
+	int tx_ptr;
+	int tx_head, tx_tail, tx_count;
+	int state;
+	unsigned long tx_start;
+	int rr0;
+	spinlock_t *register_lock;	/* Per scc_info */
+	spinlock_t ring_lock;
+};
+
+struct scc_info {
+	int irq_used;
+	int twin_serial_cfg;
+	struct net_device *dev[2];
+	struct scc_priv priv[2];
+	struct scc_info *next;
+	spinlock_t register_lock;	/* Per device register lock */
+};
+
+
+/* Function declarations */
+static int setup_adapter(int card_base, int type, int n) __init;
+
+static void write_scc(struct scc_priv *priv, int reg, int val);
+static void write_scc_data(struct scc_priv *priv, int val, int fast);
+static int read_scc(struct scc_priv *priv, int reg);
+static int read_scc_data(struct scc_priv *priv);
+
+static int scc_open(struct net_device *dev);
+static int scc_close(struct net_device *dev);
+static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+static int scc_send_packet(struct sk_buff *skb, struct net_device *dev);
+static struct net_device_stats *scc_get_stats(struct net_device *dev);
+static int scc_set_mac_address(struct net_device *dev, void *sa);
+
+static inline void tx_on(struct scc_priv *priv);
+static inline void rx_on(struct scc_priv *priv);
+static inline void rx_off(struct scc_priv *priv);
+static void start_timer(struct scc_priv *priv, int t, int r15);
+static inline unsigned char random(void);
+
+static inline void z8530_isr(struct scc_info *info);
+static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs);
+static void rx_isr(struct scc_priv *priv);
+static void special_condition(struct scc_priv *priv, int rc);
+static void rx_bh(void *arg);
+static void tx_isr(struct scc_priv *priv);
+static void es_isr(struct scc_priv *priv);
+static void tm_isr(struct scc_priv *priv);
+
+
+/* Initialization variables */
+
+static int io[MAX_NUM_DEVS] __initdata = { 0, };
+
+/* Beware! hw[] is also used in cleanup_module(). */
+static struct scc_hardware hw[NUM_TYPES] __initdata_or_module = HARDWARE;
+static char ax25_broadcast[7] __initdata =
+    { 'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1,
+'0' << 1 };
+static char ax25_test[7] __initdata =
+    { 'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1,
+'1' << 1 };
+
+
+/* Global variables */
+
+static struct scc_info *first;
+static unsigned long rand;
+
+
+MODULE_AUTHOR("Klaus Kudielka");
+MODULE_DESCRIPTION("Driver for high-speed SCC boards");
+MODULE_PARM(io, "1-" __MODULE_STRING(MAX_NUM_DEVS) "i");
+MODULE_LICENSE("GPL");
+
+static void __exit dmascc_exit(void)
+{
+	int i;
+	struct scc_info *info;
+
+	while (first) {
+		info = first;
+
+		/* Unregister devices */
+		for (i = 0; i < 2; i++)
+			unregister_netdev(info->dev[i]);
+
+		/* Reset board */
+		if (info->priv[0].type == TYPE_TWIN)
+			outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG);
+		write_scc(&info->priv[0], R9, FHWRES);
+		release_region(info->dev[0]->base_addr,
+			       hw[info->priv[0].type].io_size);
+
+		for (i = 0; i < 2; i++)
+			free_netdev(info->dev[i]);
+
+		/* Free memory */
+		first = info->next;
+		kfree(info);
+	}
+}
+
+#ifndef MODULE
+void __init dmascc_setup(char *str, int *ints)
+{
+	int i;
+
+	for (i = 0; i < MAX_NUM_DEVS && i < ints[0]; i++)
+		io[i] = ints[i + 1];
+}
+#endif
+
+static int __init dmascc_init(void)
+{
+	int h, i, j, n;
+	int base[MAX_NUM_DEVS], tcmd[MAX_NUM_DEVS], t0[MAX_NUM_DEVS],
+	    t1[MAX_NUM_DEVS];
+	unsigned t_val;
+	unsigned long time, start[MAX_NUM_DEVS], delay[MAX_NUM_DEVS],
+	    counting[MAX_NUM_DEVS];
+
+	/* Initialize random number generator */
+	rand = jiffies;
+	/* Cards found = 0 */
+	n = 0;
+	/* Warning message */
+	if (!io[0])
+		printk(KERN_INFO "dmascc: autoprobing (dangerous)\n");
+
+	/* Run autodetection for each card type */
+	for (h = 0; h < NUM_TYPES; h++) {
+
+		if (io[0]) {
+			/* User-specified I/O address regions */
+			for (i = 0; i < hw[h].num_devs; i++)
+				base[i] = 0;
+			for (i = 0; i < MAX_NUM_DEVS && io[i]; i++) {
+				j = (io[i] -
+				     hw[h].io_region) / hw[h].io_delta;
+				if (j >= 0 && j < hw[h].num_devs
+				    && hw[h].io_region +
+				    j * hw[h].io_delta == io[i]) {
+					base[j] = io[i];
+				}
+			}
+		} else {
+			/* Default I/O address regions */
+			for (i = 0; i < hw[h].num_devs; i++) {
+				base[i] =
+				    hw[h].io_region + i * hw[h].io_delta;
+			}
+		}
+
+		/* Check valid I/O address regions */
+		for (i = 0; i < hw[h].num_devs; i++)
+			if (base[i]) {
+				if (!request_region
+				    (base[i], hw[h].io_size, "dmascc"))
+					base[i] = 0;
+				else {
+					tcmd[i] =
+					    base[i] + hw[h].tmr_offset +
+					    TMR_CTRL;
+					t0[i] =
+					    base[i] + hw[h].tmr_offset +
+					    TMR_CNT0;
+					t1[i] =
+					    base[i] + hw[h].tmr_offset +
+					    TMR_CNT1;
+				}
+			}
+
+		/* Start timers */
+		for (i = 0; i < hw[h].num_devs; i++)
+			if (base[i]) {
+				/* Timer 0: LSB+MSB, Mode 3, TMR_0_HZ */
+				outb(0x36, tcmd[i]);
+				outb((hw[h].tmr_hz / TMR_0_HZ) & 0xFF,
+				     t0[i]);
+				outb((hw[h].tmr_hz / TMR_0_HZ) >> 8,
+				     t0[i]);
+				/* Timer 1: LSB+MSB, Mode 0, HZ/10 */
+				outb(0x70, tcmd[i]);
+				outb((TMR_0_HZ / HZ * 10) & 0xFF, t1[i]);
+				outb((TMR_0_HZ / HZ * 10) >> 8, t1[i]);
+				start[i] = jiffies;
+				delay[i] = 0;
+				counting[i] = 1;
+				/* Timer 2: LSB+MSB, Mode 0 */
+				outb(0xb0, tcmd[i]);
+			}
+		time = jiffies;
+		/* Wait until counter registers are loaded */
+		udelay(2000000 / TMR_0_HZ);
+
+		/* Timing loop */
+		while (jiffies - time < 13) {
+			for (i = 0; i < hw[h].num_devs; i++)
+				if (base[i] && counting[i]) {
+					/* Read back Timer 1: latch; read LSB; read MSB */
+					outb(0x40, tcmd[i]);
+					t_val =
+					    inb(t1[i]) + (inb(t1[i]) << 8);
+					/* Also check whether counter did wrap */
+					if (t_val == 0
+					    || t_val > TMR_0_HZ / HZ * 10)
+						counting[i] = 0;
+					delay[i] = jiffies - start[i];
+				}
+		}
+
+		/* Evaluate measurements */
+		for (i = 0; i < hw[h].num_devs; i++)
+			if (base[i]) {
+				if ((delay[i] >= 9 && delay[i] <= 11) &&
+				    /* Ok, we have found an adapter */
+				    (setup_adapter(base[i], h, n) == 0))
+					n++;
+				else
+					release_region(base[i],
+						       hw[h].io_size);
+			}
+
+	}			/* NUM_TYPES */
+
+	/* If any adapter was successfully initialized, return ok */
+	if (n)
+		return 0;
+
+	/* If no adapter found, return error */
+	printk(KERN_INFO "dmascc: no adapters found\n");
+	return -EIO;
+}
+
+module_init(dmascc_init);
+module_exit(dmascc_exit);
+
+static void dev_setup(struct net_device *dev)
+{
+	dev->type = ARPHRD_AX25;
+	dev->hard_header_len = 73;
+	dev->mtu = 1500;
+	dev->addr_len = 7;
+	dev->tx_queue_len = 64;
+	memcpy(dev->broadcast, ax25_broadcast, 7);
+	memcpy(dev->dev_addr, ax25_test, 7);
+}
+
+static int __init setup_adapter(int card_base, int type, int n)
+{
+	int i, irq, chip;
+	struct scc_info *info;
+	struct net_device *dev;
+	struct scc_priv *priv;
+	unsigned long time;
+	unsigned int irqs;
+	int tmr_base = card_base + hw[type].tmr_offset;
+	int scc_base = card_base + hw[type].scc_offset;
+	char *chipnames[] = CHIPNAMES;
+
+	/* Allocate memory */
+	info = kmalloc(sizeof(struct scc_info), GFP_KERNEL | GFP_DMA);
+	if (!info) {
+		printk(KERN_ERR "dmascc: "
+		       "could not allocate memory for %s at %#3x\n",
+		       hw[type].name, card_base);
+		goto out;
+	}
+
+	/* Initialize what is necessary for write_scc and write_scc_data */
+	memset(info, 0, sizeof(struct scc_info));
+
+	info->dev[0] = alloc_netdev(0, "", dev_setup);
+	if (!info->dev[0]) {
+		printk(KERN_ERR "dmascc: "
+		       "could not allocate memory for %s at %#3x\n",
+		       hw[type].name, card_base);
+		goto out1;
+	}
+
+	info->dev[1] = alloc_netdev(0, "", dev_setup);
+	if (!info->dev[1]) {
+		printk(KERN_ERR "dmascc: "
+		       "could not allocate memory for %s at %#3x\n",
+		       hw[type].name, card_base);
+		goto out2;
+	}
+	spin_lock_init(&info->register_lock);
+
+	priv = &info->priv[0];
+	priv->type = type;
+	priv->card_base = card_base;
+	priv->scc_cmd = scc_base + SCCA_CMD;
+	priv->scc_data = scc_base + SCCA_DATA;
+	priv->register_lock = &info->register_lock;
+
+	/* Reset SCC */
+	write_scc(priv, R9, FHWRES | MIE | NV);
+
+	/* Determine type of chip by enabling SDLC/HDLC enhancements */
+	write_scc(priv, R15, SHDLCE);
+	if (!read_scc(priv, R15)) {
+		/* WR7' not present. This is an ordinary Z8530 SCC. */
+		chip = Z8530;
+	} else {
+		/* Put one character in TX FIFO */
+		write_scc_data(priv, 0, 0);
+		if (read_scc(priv, R0) & Tx_BUF_EMP) {
+			/* TX FIFO not full. This is a Z85230 ESCC with a 4-byte FIFO. */
+			chip = Z85230;
+		} else {
+			/* TX FIFO full. This is a Z85C30 SCC with a 1-byte FIFO. */
+			chip = Z85C30;
+		}
+	}
+	write_scc(priv, R15, 0);
+
+	/* Start IRQ auto-detection */
+	irqs = probe_irq_on();
+
+	/* Enable interrupts */
+	if (type == TYPE_TWIN) {
+		outb(0, card_base + TWIN_DMA_CFG);
+		inb(card_base + TWIN_CLR_TMR1);
+		inb(card_base + TWIN_CLR_TMR2);
+		info->twin_serial_cfg = TWIN_EI;
+		outb(info->twin_serial_cfg, card_base + TWIN_SERIAL_CFG);
+	} else {
+		write_scc(priv, R15, CTSIE);
+		write_scc(priv, R0, RES_EXT_INT);
+		write_scc(priv, R1, EXT_INT_ENAB);
+	}
+
+	/* Start timer */
+	outb(1, tmr_base + TMR_CNT1);
+	outb(0, tmr_base + TMR_CNT1);
+
+	/* Wait and detect IRQ */
+	time = jiffies;
+	while (jiffies - time < 2 + HZ / TMR_0_HZ);
+	irq = probe_irq_off(irqs);
+
+	/* Clear pending interrupt, disable interrupts */
+	if (type == TYPE_TWIN) {
+		inb(card_base + TWIN_CLR_TMR1);
+	} else {
+		write_scc(priv, R1, 0);
+		write_scc(priv, R15, 0);
+		write_scc(priv, R0, RES_EXT_INT);
+	}
+
+	if (irq <= 0) {
+		printk(KERN_ERR
+		       "dmascc: could not find irq of %s at %#3x (irq=%d)\n",
+		       hw[type].name, card_base, irq);
+		goto out3;
+	}
+
+	/* Set up data structures */
+	for (i = 0; i < 2; i++) {
+		dev = info->dev[i];
+		priv = &info->priv[i];
+		priv->type = type;
+		priv->chip = chip;
+		priv->dev = dev;
+		priv->info = info;
+		priv->channel = i;
+		spin_lock_init(&priv->ring_lock);
+		priv->register_lock = &info->register_lock;
+		priv->card_base = card_base;
+		priv->scc_cmd = scc_base + (i ? SCCB_CMD : SCCA_CMD);
+		priv->scc_data = scc_base + (i ? SCCB_DATA : SCCA_DATA);
+		priv->tmr_cnt = tmr_base + (i ? TMR_CNT2 : TMR_CNT1);
+		priv->tmr_ctrl = tmr_base + TMR_CTRL;
+		priv->tmr_mode = i ? 0xb0 : 0x70;
+		priv->param.pclk_hz = hw[type].pclk_hz;
+		priv->param.brg_tc = -1;
+		priv->param.clocks = TCTRxCP | RCRTxCP;
+		priv->param.persist = 256;
+		priv->param.dma = -1;
+		INIT_WORK(&priv->rx_work, rx_bh, priv);
+		dev->priv = priv;
+		sprintf(dev->name, "dmascc%i", 2 * n + i);
+		SET_MODULE_OWNER(dev);
+		dev->base_addr = card_base;
+		dev->irq = irq;
+		dev->open = scc_open;
+		dev->stop = scc_close;
+		dev->do_ioctl = scc_ioctl;
+		dev->hard_start_xmit = scc_send_packet;
+		dev->get_stats = scc_get_stats;
+		dev->hard_header = ax25_encapsulate;
+		dev->rebuild_header = ax25_rebuild_header;
+		dev->set_mac_address = scc_set_mac_address;
+	}
+	if (register_netdev(info->dev[0])) {
+		printk(KERN_ERR "dmascc: could not register %s\n",
+		       info->dev[0]->name);
+		goto out3;
+	}
+	if (register_netdev(info->dev[1])) {
+		printk(KERN_ERR "dmascc: could not register %s\n",
+		       info->dev[1]->name);
+		goto out4;
+	}
+
+
+	info->next = first;
+	first = info;
+	printk(KERN_INFO "dmascc: found %s (%s) at %#3x, irq %d\n",
+	       hw[type].name, chipnames[chip], card_base, irq);
+	return 0;
+
+      out4:
+	unregister_netdev(info->dev[0]);
+      out3:
+	if (info->priv[0].type == TYPE_TWIN)
+		outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG);
+	write_scc(&info->priv[0], R9, FHWRES);
+	free_netdev(info->dev[1]);
+      out2:
+	free_netdev(info->dev[0]);
+      out1:
+	kfree(info);
+      out:
+	return -1;
+}
+
+
+/* Driver functions */
+
+static void write_scc(struct scc_priv *priv, int reg, int val)
+{
+	unsigned long flags;
+	switch (priv->type) {
+	case TYPE_S5:
+		if (reg)
+			outb(reg, priv->scc_cmd);
+		outb(val, priv->scc_cmd);
+		return;
+	case TYPE_TWIN:
+		if (reg)
+			outb_p(reg, priv->scc_cmd);
+		outb_p(val, priv->scc_cmd);
+		return;
+	default:
+		spin_lock_irqsave(priv->register_lock, flags);
+		outb_p(0, priv->card_base + PI_DREQ_MASK);
+		if (reg)
+			outb_p(reg, priv->scc_cmd);
+		outb_p(val, priv->scc_cmd);
+		outb(1, priv->card_base + PI_DREQ_MASK);
+		spin_unlock_irqrestore(priv->register_lock, flags);
+		return;
+	}
+}
+
+
+static void write_scc_data(struct scc_priv *priv, int val, int fast)
+{
+	unsigned long flags;
+	switch (priv->type) {
+	case TYPE_S5:
+		outb(val, priv->scc_data);
+		return;
+	case TYPE_TWIN:
+		outb_p(val, priv->scc_data);
+		return;
+	default:
+		if (fast)
+			outb_p(val, priv->scc_data);
+		else {
+			spin_lock_irqsave(priv->register_lock, flags);
+			outb_p(0, priv->card_base + PI_DREQ_MASK);
+			outb_p(val, priv->scc_data);
+			outb(1, priv->card_base + PI_DREQ_MASK);
+			spin_unlock_irqrestore(priv->register_lock, flags);
+		}
+		return;
+	}
+}
+
+
+static int read_scc(struct scc_priv *priv, int reg)
+{
+	int rc;
+	unsigned long flags;
+	switch (priv->type) {
+	case TYPE_S5:
+		if (reg)
+			outb(reg, priv->scc_cmd);
+		return inb(priv->scc_cmd);
+	case TYPE_TWIN:
+		if (reg)
+			outb_p(reg, priv->scc_cmd);
+		return inb_p(priv->scc_cmd);
+	default:
+		spin_lock_irqsave(priv->register_lock, flags);
+		outb_p(0, priv->card_base + PI_DREQ_MASK);
+		if (reg)
+			outb_p(reg, priv->scc_cmd);
+		rc = inb_p(priv->scc_cmd);
+		outb(1, priv->card_base + PI_DREQ_MASK);
+		spin_unlock_irqrestore(priv->register_lock, flags);
+		return rc;
+	}
+}
+
+
+static int read_scc_data(struct scc_priv *priv)
+{
+	int rc;
+	unsigned long flags;
+	switch (priv->type) {
+	case TYPE_S5:
+		return inb(priv->scc_data);
+	case TYPE_TWIN:
+		return inb_p(priv->scc_data);
+	default:
+		spin_lock_irqsave(priv->register_lock, flags);
+		outb_p(0, priv->card_base + PI_DREQ_MASK);
+		rc = inb_p(priv->scc_data);
+		outb(1, priv->card_base + PI_DREQ_MASK);
+		spin_unlock_irqrestore(priv->register_lock, flags);
+		return rc;
+	}
+}
+
+
+static int scc_open(struct net_device *dev)
+{
+	struct scc_priv *priv = dev->priv;
+	struct scc_info *info = priv->info;
+	int card_base = priv->card_base;
+
+	/* Request IRQ if not already used by other channel */
+	if (!info->irq_used) {
+		if (request_irq(dev->irq, scc_isr, 0, "dmascc", info)) {
+			return -EAGAIN;
+		}
+	}
+	info->irq_used++;
+
+	/* Request DMA if required */
+	if (priv->param.dma >= 0) {
+		if (request_dma(priv->param.dma, "dmascc")) {
+			if (--info->irq_used == 0)
+				free_irq(dev->irq, info);
+			return -EAGAIN;
+		} else {
+			unsigned long flags = claim_dma_lock();
+			clear_dma_ff(priv->param.dma);
+			release_dma_lock(flags);
+		}
+	}
+
+	/* Initialize local variables */
+	priv->rx_ptr = 0;
+	priv->rx_over = 0;
+	priv->rx_head = priv->rx_tail = priv->rx_count = 0;
+	priv->state = IDLE;
+	priv->tx_head = priv->tx_tail = priv->tx_count = 0;
+	priv->tx_ptr = 0;
+
+	/* Reset channel */
+	write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV);
+	/* X1 clock, SDLC mode */
+	write_scc(priv, R4, SDLC | X1CLK);
+	/* DMA */
+	write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
+	/* 8 bit RX char, RX disable */
+	write_scc(priv, R3, Rx8);
+	/* 8 bit TX char, TX disable */
+	write_scc(priv, R5, Tx8);
+	/* SDLC address field */
+	write_scc(priv, R6, 0);
+	/* SDLC flag */
+	write_scc(priv, R7, FLAG);
+	switch (priv->chip) {
+	case Z85C30:
+		/* Select WR7' */
+		write_scc(priv, R15, SHDLCE);
+		/* Auto EOM reset */
+		write_scc(priv, R7, AUTOEOM);
+		write_scc(priv, R15, 0);
+		break;
+	case Z85230:
+		/* Select WR7' */
+		write_scc(priv, R15, SHDLCE);
+		/* The following bits are set (see 2.5.2.1):
+		   - Automatic EOM reset
+		   - Interrupt request if RX FIFO is half full
+		   This bit should be ignored in DMA mode (according to the
+		   documentation), but actually isn't. The receiver doesn't work if
+		   it is set. Thus, we have to clear it in DMA mode.
+		   - Interrupt/DMA request if TX FIFO is completely empty
+		   a) If set, the ESCC behaves as if it had no TX FIFO (Z85C30
+		   compatibility).
+		   b) If cleared, DMA requests may follow each other very quickly,
+		   filling up the TX FIFO.
+		   Advantage: TX works even in case of high bus latency.
+		   Disadvantage: Edge-triggered DMA request circuitry may miss
+		   a request. No more data is delivered, resulting
+		   in a TX FIFO underrun.
+		   Both PI2 and S5SCC/DMA seem to work fine with TXFIFOE cleared.
+		   The PackeTwin doesn't. I don't know about the PI, but let's
+		   assume it behaves like the PI2.
+		 */
+		if (priv->param.dma >= 0) {
+			if (priv->type == TYPE_TWIN)
+				write_scc(priv, R7, AUTOEOM | TXFIFOE);
+			else
+				write_scc(priv, R7, AUTOEOM);
+		} else {
+			write_scc(priv, R7, AUTOEOM | RXFIFOH);
+		}
+		write_scc(priv, R15, 0);
+		break;
+	}
+	/* Preset CRC, NRZ(I) encoding */
+	write_scc(priv, R10, CRCPS | (priv->param.nrzi ? NRZI : NRZ));
+
+	/* Configure baud rate generator */
+	if (priv->param.brg_tc >= 0) {
+		/* Program BR generator */
+		write_scc(priv, R12, priv->param.brg_tc & 0xFF);
+		write_scc(priv, R13, (priv->param.brg_tc >> 8) & 0xFF);
+		/* BRG source = SYS CLK; enable BRG; DTR REQ function (required by
+		   PackeTwin, not connected on the PI2); set DPLL source to BRG */
+		write_scc(priv, R14, SSBR | DTRREQ | BRSRC | BRENABL);
+		/* Enable DPLL */
+		write_scc(priv, R14, SEARCH | DTRREQ | BRSRC | BRENABL);
+	} else {
+		/* Disable BR generator */
+		write_scc(priv, R14, DTRREQ | BRSRC);
+	}
+
+	/* Configure clocks */
+	if (priv->type == TYPE_TWIN) {
+		/* Disable external TX clock receiver */
+		outb((info->twin_serial_cfg &=
+		      ~(priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)),
+		     card_base + TWIN_SERIAL_CFG);
+	}
+	write_scc(priv, R11, priv->param.clocks);
+	if ((priv->type == TYPE_TWIN) && !(priv->param.clocks & TRxCOI)) {
+		/* Enable external TX clock receiver */
+		outb((info->twin_serial_cfg |=
+		      (priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)),
+		     card_base + TWIN_SERIAL_CFG);
+	}
+
+	/* Configure PackeTwin */
+	if (priv->type == TYPE_TWIN) {
+		/* Assert DTR, enable interrupts */
+		outb((info->twin_serial_cfg |= TWIN_EI |
+		      (priv->channel ? TWIN_DTRB_ON : TWIN_DTRA_ON)),
+		     card_base + TWIN_SERIAL_CFG);
+	}
+
+	/* Read current status */
+	priv->rr0 = read_scc(priv, R0);
+	/* Enable DCD interrupt */
+	write_scc(priv, R15, DCDIE);
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+
+static int scc_close(struct net_device *dev)
+{
+	struct scc_priv *priv = dev->priv;
+	struct scc_info *info = priv->info;
+	int card_base = priv->card_base;
+
+	netif_stop_queue(dev);
+
+	if (priv->type == TYPE_TWIN) {
+		/* Drop DTR */
+		outb((info->twin_serial_cfg &=
+		      (priv->channel ? ~TWIN_DTRB_ON : ~TWIN_DTRA_ON)),
+		     card_base + TWIN_SERIAL_CFG);
+	}
+
+	/* Reset channel, free DMA and IRQ */
+	write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV);
+	if (priv->param.dma >= 0) {
+		if (priv->type == TYPE_TWIN)
+			outb(0, card_base + TWIN_DMA_CFG);
+		free_dma(priv->param.dma);
+	}
+	if (--info->irq_used == 0)
+		free_irq(dev->irq, info);
+
+	return 0;
+}
+
+
+static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct scc_priv *priv = dev->priv;
+
+	switch (cmd) {
+	case SIOCGSCCPARAM:
+		if (copy_to_user
+		    (ifr->ifr_data, &priv->param,
+		     sizeof(struct scc_param)))
+			return -EFAULT;
+		return 0;
+	case SIOCSSCCPARAM:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (netif_running(dev))
+			return -EAGAIN;
+		if (copy_from_user
+		    (&priv->param, ifr->ifr_data,
+		     sizeof(struct scc_param)))
+			return -EFAULT;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+
+static int scc_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+	struct scc_priv *priv = dev->priv;
+	unsigned long flags;
+	int i;
+
+	/* Temporarily stop the scheduler feeding us packets */
+	netif_stop_queue(dev);
+
+	/* Transfer data to DMA buffer */
+	i = priv->tx_head;
+	memcpy(priv->tx_buf[i], skb->data + 1, skb->len - 1);
+	priv->tx_len[i] = skb->len - 1;
+
+	/* Clear interrupts while we touch our circular buffers */
+
+	spin_lock_irqsave(&priv->ring_lock, flags);
+	/* Move the ring buffer's head */
+	priv->tx_head = (i + 1) % NUM_TX_BUF;
+	priv->tx_count++;
+
+	/* If we just filled up the last buffer, leave queue stopped.
+	   The higher layers must wait until we have a DMA buffer
+	   to accept the data. */
+	if (priv->tx_count < NUM_TX_BUF)
+		netif_wake_queue(dev);
+
+	/* Set new TX state */
+	if (priv->state == IDLE) {
+		/* Assert RTS, start timer */
+		priv->state = TX_HEAD;
+		priv->tx_start = jiffies;
+		write_scc(priv, R5, TxCRC_ENAB | RTS | TxENAB | Tx8);
+		write_scc(priv, R15, 0);
+		start_timer(priv, priv->param.txdelay, 0);
+	}
+
+	/* Turn interrupts back on and free buffer */
+	spin_unlock_irqrestore(&priv->ring_lock, flags);
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+
+static struct net_device_stats *scc_get_stats(struct net_device *dev)
+{
+	struct scc_priv *priv = dev->priv;
+
+	return &priv->stats;
+}
+
+
+static int scc_set_mac_address(struct net_device *dev, void *sa)
+{
+	memcpy(dev->dev_addr, ((struct sockaddr *) sa)->sa_data,
+	       dev->addr_len);
+	return 0;
+}
+
+
+static inline void tx_on(struct scc_priv *priv)
+{
+	int i, n;
+	unsigned long flags;
+
+	if (priv->param.dma >= 0) {
+		n = (priv->chip == Z85230) ? 3 : 1;
+		/* Program DMA controller */
+		flags = claim_dma_lock();
+		set_dma_mode(priv->param.dma, DMA_MODE_WRITE);
+		set_dma_addr(priv->param.dma,
+			     (int) priv->tx_buf[priv->tx_tail] + n);
+		set_dma_count(priv->param.dma,
+			      priv->tx_len[priv->tx_tail] - n);
+		release_dma_lock(flags);
+		/* Enable TX underrun interrupt */
+		write_scc(priv, R15, TxUIE);
+		/* Configure DREQ */
+		if (priv->type == TYPE_TWIN)
+			outb((priv->param.dma ==
+			      1) ? TWIN_DMA_HDX_T1 : TWIN_DMA_HDX_T3,
+			     priv->card_base + TWIN_DMA_CFG);
+		else
+			write_scc(priv, R1,
+				  EXT_INT_ENAB | WT_FN_RDYFN |
+				  WT_RDY_ENAB);
+		/* Write first byte(s) */
+		spin_lock_irqsave(priv->register_lock, flags);
+		for (i = 0; i < n; i++)
+			write_scc_data(priv,
+				       priv->tx_buf[priv->tx_tail][i], 1);
+		enable_dma(priv->param.dma);
+		spin_unlock_irqrestore(priv->register_lock, flags);
+	} else {
+		write_scc(priv, R15, TxUIE);
+		write_scc(priv, R1,
+			  EXT_INT_ENAB | WT_FN_RDYFN | TxINT_ENAB);
+		tx_isr(priv);
+	}
+	/* Reset EOM latch if we do not have the AUTOEOM feature */
+	if (priv->chip == Z8530)
+		write_scc(priv, R0, RES_EOM_L);
+}
+
+
+static inline void rx_on(struct scc_priv *priv)
+{
+	unsigned long flags;
+
+	/* Clear RX FIFO */
+	while (read_scc(priv, R0) & Rx_CH_AV)
+		read_scc_data(priv);
+	priv->rx_over = 0;
+	if (priv->param.dma >= 0) {
+		/* Program DMA controller */
+		flags = claim_dma_lock();
+		set_dma_mode(priv->param.dma, DMA_MODE_READ);
+		set_dma_addr(priv->param.dma,
+			     (int) priv->rx_buf[priv->rx_head]);
+		set_dma_count(priv->param.dma, BUF_SIZE);
+		release_dma_lock(flags);
+		enable_dma(priv->param.dma);
+		/* Configure PackeTwin DMA */
+		if (priv->type == TYPE_TWIN) {
+			outb((priv->param.dma ==
+			      1) ? TWIN_DMA_HDX_R1 : TWIN_DMA_HDX_R3,
+			     priv->card_base + TWIN_DMA_CFG);
+		}
+		/* Sp. cond. intr. only, ext int enable, RX DMA enable */
+		write_scc(priv, R1, EXT_INT_ENAB | INT_ERR_Rx |
+			  WT_RDY_RT | WT_FN_RDYFN | WT_RDY_ENAB);
+	} else {
+		/* Reset current frame */
+		priv->rx_ptr = 0;
+		/* Intr. on all Rx characters and Sp. cond., ext int enable */
+		write_scc(priv, R1, EXT_INT_ENAB | INT_ALL_Rx | WT_RDY_RT |
+			  WT_FN_RDYFN);
+	}
+	write_scc(priv, R0, ERR_RES);
+	write_scc(priv, R3, RxENABLE | Rx8 | RxCRC_ENAB);
+}
+
+
+static inline void rx_off(struct scc_priv *priv)
+{
+	/* Disable receiver */
+	write_scc(priv, R3, Rx8);
+	/* Disable DREQ / RX interrupt */
+	if (priv->param.dma >= 0 && priv->type == TYPE_TWIN)
+		outb(0, priv->card_base + TWIN_DMA_CFG);
+	else
+		write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
+	/* Disable DMA */
+	if (priv->param.dma >= 0)
+		disable_dma(priv->param.dma);
+}
+
+
+static void start_timer(struct scc_priv *priv, int t, int r15)
+{
+	unsigned long flags;
+
+	outb(priv->tmr_mode, priv->tmr_ctrl);
+	if (t == 0) {
+		tm_isr(priv);
+	} else if (t > 0) {
+		save_flags(flags);
+		cli();
+		outb(t & 0xFF, priv->tmr_cnt);
+		outb((t >> 8) & 0xFF, priv->tmr_cnt);
+		if (priv->type != TYPE_TWIN) {
+			write_scc(priv, R15, r15 | CTSIE);
+			priv->rr0 |= CTS;
+		}
+		restore_flags(flags);
+	}
+}
+
+
+static inline unsigned char random(void)
+{
+	/* See "Numerical Recipes in C", second edition, p. 284 */
+	rand = rand * 1664525L + 1013904223L;
+	return (unsigned char) (rand >> 24);
+}
+
+static inline void z8530_isr(struct scc_info *info)
+{
+	int is, i = 100;
+
+	while ((is = read_scc(&info->priv[0], R3)) && i--) {
+		if (is & CHARxIP) {
+			rx_isr(&info->priv[0]);
+		} else if (is & CHATxIP) {
+			tx_isr(&info->priv[0]);
+		} else if (is & CHAEXT) {
+			es_isr(&info->priv[0]);
+		} else if (is & CHBRxIP) {
+			rx_isr(&info->priv[1]);
+		} else if (is & CHBTxIP) {
+			tx_isr(&info->priv[1]);
+		} else {
+			es_isr(&info->priv[1]);
+		}
+		write_scc(&info->priv[0], R0, RES_H_IUS);
+		i++;
+	}
+	if (i < 0) {
+		printk(KERN_ERR "dmascc: stuck in ISR with RR3=0x%02x.\n",
+		       is);
+	}
+	/* Ok, no interrupts pending from this 8530. The INT line should
+	   be inactive now. */
+}
+
+
+static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct scc_info *info = dev_id;
+
+	spin_lock(info->priv[0].register_lock);
+	/* At this point interrupts are enabled, and the interrupt under service
+	   is already acknowledged, but masked off.
+
+	   Interrupt processing: We loop until we know that the IRQ line is
+	   low. If another positive edge occurs afterwards during the ISR,
+	   another interrupt will be triggered by the interrupt controller
+	   as soon as the IRQ level is enabled again (see asm/irq.h).
+
+	   Bottom-half handlers will be processed after scc_isr(). This is
+	   important, since we only have small ringbuffers and want new data
+	   to be fetched/delivered immediately. */
+
+	if (info->priv[0].type == TYPE_TWIN) {
+		int is, card_base = info->priv[0].card_base;
+		while ((is = ~inb(card_base + TWIN_INT_REG)) &
+		       TWIN_INT_MSK) {
+			if (is & TWIN_SCC_MSK) {
+				z8530_isr(info);
+			} else if (is & TWIN_TMR1_MSK) {
+				inb(card_base + TWIN_CLR_TMR1);
+				tm_isr(&info->priv[0]);
+			} else {
+				inb(card_base + TWIN_CLR_TMR2);
+				tm_isr(&info->priv[1]);
+			}
+		}
+	} else
+		z8530_isr(info);
+	spin_unlock(info->priv[0].register_lock);
+	return IRQ_HANDLED;
+}
+
+
+static void rx_isr(struct scc_priv *priv)
+{
+	if (priv->param.dma >= 0) {
+		/* Check special condition and perform error reset. See 2.4.7.5. */
+		special_condition(priv, read_scc(priv, R1));
+		write_scc(priv, R0, ERR_RES);
+	} else {
+		/* Check special condition for each character. Error reset not necessary.
+		   Same algorithm for SCC and ESCC. See 2.4.7.1 and 2.4.7.4. */
+		int rc;
+		while (read_scc(priv, R0) & Rx_CH_AV) {
+			rc = read_scc(priv, R1);
+			if (priv->rx_ptr < BUF_SIZE)
+				priv->rx_buf[priv->rx_head][priv->
+							    rx_ptr++] =
+				    read_scc_data(priv);
+			else {
+				priv->rx_over = 2;
+				read_scc_data(priv);
+			}
+			special_condition(priv, rc);
+		}
+	}
+}
+
+
+static void special_condition(struct scc_priv *priv, int rc)
+{
+	int cb;
+	unsigned long flags;
+
+	/* See Figure 2-15. Only overrun and EOF need to be checked. */
+
+	if (rc & Rx_OVR) {
+		/* Receiver overrun */
+		priv->rx_over = 1;
+		if (priv->param.dma < 0)
+			write_scc(priv, R0, ERR_RES);
+	} else if (rc & END_FR) {
+		/* End of frame. Get byte count */
+		if (priv->param.dma >= 0) {
+			flags = claim_dma_lock();
+			cb = BUF_SIZE - get_dma_residue(priv->param.dma) -
+			    2;
+			release_dma_lock(flags);
+		} else {
+			cb = priv->rx_ptr - 2;
+		}
+		if (priv->rx_over) {
+			/* We had an overrun */
+			priv->stats.rx_errors++;
+			if (priv->rx_over == 2)
+				priv->stats.rx_length_errors++;
+			else
+				priv->stats.rx_fifo_errors++;
+			priv->rx_over = 0;
+		} else if (rc & CRC_ERR) {
+			/* Count invalid CRC only if packet length >= minimum */
+			if (cb >= 15) {
+				priv->stats.rx_errors++;
+				priv->stats.rx_crc_errors++;
+			}
+		} else {
+			if (cb >= 15) {
+				if (priv->rx_count < NUM_RX_BUF - 1) {
+					/* Put good frame in FIFO */
+					priv->rx_len[priv->rx_head] = cb;
+					priv->rx_head =
+					    (priv->rx_head +
+					     1) % NUM_RX_BUF;
+					priv->rx_count++;
+					schedule_work(&priv->rx_work);
+				} else {
+					priv->stats.rx_errors++;
+					priv->stats.rx_over_errors++;
+				}
+			}
+		}
+		/* Get ready for new frame */
+		if (priv->param.dma >= 0) {
+			flags = claim_dma_lock();
+			set_dma_addr(priv->param.dma,
+				     (int) priv->rx_buf[priv->rx_head]);
+			set_dma_count(priv->param.dma, BUF_SIZE);
+			release_dma_lock(flags);
+		} else {
+			priv->rx_ptr = 0;
+		}
+	}
+}
+
+
+static void rx_bh(void *arg)
+{
+	struct scc_priv *priv = arg;
+	int i = priv->rx_tail;
+	int cb;
+	unsigned long flags;
+	struct sk_buff *skb;
+	unsigned char *data;
+
+	spin_lock_irqsave(&priv->ring_lock, flags);
+	while (priv->rx_count) {
+		spin_unlock_irqrestore(&priv->ring_lock, flags);
+		cb = priv->rx_len[i];
+		/* Allocate buffer */
+		skb = dev_alloc_skb(cb + 1);
+		if (skb == NULL) {
+			/* Drop packet */
+			priv->stats.rx_dropped++;
+		} else {
+			/* Fill buffer */
+			data = skb_put(skb, cb + 1);
+			data[0] = 0;
+			memcpy(&data[1], priv->rx_buf[i], cb);
+			skb->dev = priv->dev;
+			skb->protocol = ntohs(ETH_P_AX25);
+			skb->mac.raw = skb->data;
+			netif_rx(skb);
+			priv->dev->last_rx = jiffies;
+			priv->stats.rx_packets++;
+			priv->stats.rx_bytes += cb;
+		}
+		spin_lock_irqsave(&priv->ring_lock, flags);
+		/* Move tail */
+		priv->rx_tail = i = (i + 1) % NUM_RX_BUF;
+		priv->rx_count--;
+	}
+	spin_unlock_irqrestore(&priv->ring_lock, flags);
+}
+
+
+static void tx_isr(struct scc_priv *priv)
+{
+	int i = priv->tx_tail, p = priv->tx_ptr;
+
+	/* Suspend TX interrupts if we don't want to send anything.
+	   See Figure 2-22. */
+	if (p == priv->tx_len[i]) {
+		write_scc(priv, R0, RES_Tx_P);
+		return;
+	}
+
+	/* Write characters */
+	while ((read_scc(priv, R0) & Tx_BUF_EMP) && p < priv->tx_len[i]) {
+		write_scc_data(priv, priv->tx_buf[i][p++], 0);
+	}
+
+	/* Reset EOM latch of Z8530 */
+	if (!priv->tx_ptr && p && priv->chip == Z8530)
+		write_scc(priv, R0, RES_EOM_L);
+
+	priv->tx_ptr = p;
+}
+
+
+static void es_isr(struct scc_priv *priv)
+{
+	int i, rr0, drr0, res;
+	unsigned long flags;
+
+	/* Read status, reset interrupt bit (open latches) */
+	rr0 = read_scc(priv, R0);
+	write_scc(priv, R0, RES_EXT_INT);
+	drr0 = priv->rr0 ^ rr0;
+	priv->rr0 = rr0;
+
+	/* Transmit underrun (2.4.9.6). We can't check the TxEOM flag, since
+	   it might have already been cleared again by AUTOEOM. */
+	if (priv->state == TX_DATA) {
+		/* Get remaining bytes */
+		i = priv->tx_tail;
+		if (priv->param.dma >= 0) {
+			disable_dma(priv->param.dma);
+			flags = claim_dma_lock();
+			res = get_dma_residue(priv->param.dma);
+			release_dma_lock(flags);
+		} else {
+			res = priv->tx_len[i] - priv->tx_ptr;
+			priv->tx_ptr = 0;
+		}
+		/* Disable DREQ / TX interrupt */
+		if (priv->param.dma >= 0 && priv->type == TYPE_TWIN)
+			outb(0, priv->card_base + TWIN_DMA_CFG);
+		else
+			write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
+		if (res) {
+			/* Update packet statistics */
+			priv->stats.tx_errors++;
+			priv->stats.tx_fifo_errors++;
+			/* Other underrun interrupts may already be waiting */
+			write_scc(priv, R0, RES_EXT_INT);
+			write_scc(priv, R0, RES_EXT_INT);
+		} else {
+			/* Update packet statistics */
+			priv->stats.tx_packets++;
+			priv->stats.tx_bytes += priv->tx_len[i];
+			/* Remove frame from FIFO */
+			priv->tx_tail = (i + 1) % NUM_TX_BUF;
+			priv->tx_count--;
+			/* Inform upper layers */
+			netif_wake_queue(priv->dev);
+		}
+		/* Switch state */
+		write_scc(priv, R15, 0);
+		if (priv->tx_count &&
+		    (jiffies - priv->tx_start) < priv->param.txtimeout) {
+			priv->state = TX_PAUSE;
+			start_timer(priv, priv->param.txpause, 0);
+		} else {
+			priv->state = TX_TAIL;
+			start_timer(priv, priv->param.txtail, 0);
+		}
+	}
+
+	/* DCD transition */
+	if (drr0 & DCD) {
+		if (rr0 & DCD) {
+			switch (priv->state) {
+			case IDLE:
+			case WAIT:
+				priv->state = DCD_ON;
+				write_scc(priv, R15, 0);
+				start_timer(priv, priv->param.dcdon, 0);
+			}
+		} else {
+			switch (priv->state) {
+			case RX_ON:
+				rx_off(priv);
+				priv->state = DCD_OFF;
+				write_scc(priv, R15, 0);
+				start_timer(priv, priv->param.dcdoff, 0);
+			}
+		}
+	}
+
+	/* CTS transition */
+	if ((drr0 & CTS) && (~rr0 & CTS) && priv->type != TYPE_TWIN)
+		tm_isr(priv);
+
+}
+
+
+static void tm_isr(struct scc_priv *priv)
+{
+	switch (priv->state) {
+	case TX_HEAD:
+	case TX_PAUSE:
+		tx_on(priv);
+		priv->state = TX_DATA;
+		break;
+	case TX_TAIL:
+		write_scc(priv, R5, TxCRC_ENAB | Tx8);
+		priv->state = RTS_OFF;
+		if (priv->type != TYPE_TWIN)
+			write_scc(priv, R15, 0);
+		start_timer(priv, priv->param.rtsoff, 0);
+		break;
+	case RTS_OFF:
+		write_scc(priv, R15, DCDIE);
+		priv->rr0 = read_scc(priv, R0);
+		if (priv->rr0 & DCD) {
+			priv->stats.collisions++;
+			rx_on(priv);
+			priv->state = RX_ON;
+		} else {
+			priv->state = WAIT;
+			start_timer(priv, priv->param.waittime, DCDIE);
+		}
+		break;
+	case WAIT:
+		if (priv->tx_count) {
+			priv->state = TX_HEAD;
+			priv->tx_start = jiffies;
+			write_scc(priv, R5,
+				  TxCRC_ENAB | RTS | TxENAB | Tx8);
+			write_scc(priv, R15, 0);
+			start_timer(priv, priv->param.txdelay, 0);
+		} else {
+			priv->state = IDLE;
+			if (priv->type != TYPE_TWIN)
+				write_scc(priv, R15, DCDIE);
+		}
+		break;
+	case DCD_ON:
+	case DCD_OFF:
+		write_scc(priv, R15, DCDIE);
+		priv->rr0 = read_scc(priv, R0);
+		if (priv->rr0 & DCD) {
+			rx_on(priv);
+			priv->state = RX_ON;
+		} else {
+			priv->state = WAIT;
+			start_timer(priv,
+				    random() / priv->param.persist *
+				    priv->param.slottime, DCDIE);
+		}
+		break;
+	}
+}