Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Minor comment conflict in mac80211.

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 64 insertions, 18 deletions

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c
index 085d9676e34b..47eb751a2570 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c
@@ -648,12 +648,12 @@ static int mlxsw_sp_mr_vif_resolve(struct mlxsw_sp_mr_table *mr_table,
 	return 0;
 
 err_erif_unresolve:
-	list_for_each_entry_from_reverse(erve, &mr_vif->route_evif_list,
-					 vif_node)
+	list_for_each_entry_continue_reverse(erve, &mr_vif->route_evif_list,
+					     vif_node)
 		mlxsw_sp_mr_route_evif_unresolve(mr_table, erve);
 err_irif_unresolve:
-	list_for_each_entry_from_reverse(irve, &mr_vif->route_ivif_list,
-					 vif_node)
+	list_for_each_entry_continue_reverse(irve, &mr_vif->route_ivif_list,
+					     vif_node)
 		mlxsw_sp_mr_route_ivif_unresolve(mr_table, irve);
 	mr_vif->rif = NULL;
 	return err;
diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index 58579baf3f7a..45cc840d8e2e 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -157,6 +157,50 @@ static int msg_enable;
  */
 
 /**
+ * ks_check_endian - Check whether endianness of the bus is correct
+ * @ks	  : The chip information
+ *
+ * The KS8851-16MLL EESK pin allows selecting the endianness of the 16bit
+ * bus. To maintain optimum performance, the bus endianness should be set
+ * such that it matches the endianness of the CPU.
+ */
+
+static int ks_check_endian(struct ks_net *ks)
+{
+	u16 cider;
+
+	/*
+	 * Read CIDER register first, however read it the "wrong" way around.
+	 * If the endian strap on the KS8851-16MLL in incorrect and the chip
+	 * is operating in different endianness than the CPU, then the meaning
+	 * of BE[3:0] byte-enable bits is also swapped such that:
+	 *    BE[3,2,1,0] becomes BE[1,0,3,2]
+	 *
+	 * Luckily for us, the byte-enable bits are the top four MSbits of
+	 * the address register and the CIDER register is at offset 0xc0.
+	 * Hence, by reading address 0xc0c0, which is not impacted by endian
+	 * swapping, we assert either BE[3:2] or BE[1:0] while reading the
+	 * CIDER register.
+	 *
+	 * If the bus configuration is correct, reading 0xc0c0 asserts
+	 * BE[3:2] and this read returns 0x0000, because to read register
+	 * with bottom two LSbits of address set to 0, BE[1:0] must be
+	 * asserted.
+	 *
+	 * If the bus configuration is NOT correct, reading 0xc0c0 asserts
+	 * BE[1:0] and this read returns non-zero 0x8872 value.
+	 */
+	iowrite16(BE3 | BE2 | KS_CIDER, ks->hw_addr_cmd);
+	cider = ioread16(ks->hw_addr);
+	if (!cider)
+		return 0;
+
+	netdev_err(ks->netdev, "incorrect EESK endian strap setting\n");
+
+	return -EINVAL;
+}
+
+/**
  * ks_rdreg16 - read 16 bit register from device
  * @ks	  : The chip information
  * @offset: The register address
@@ -166,7 +210,7 @@ static int msg_enable;
 
 static u16 ks_rdreg16(struct ks_net *ks, int offset)
 {
-	ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
+	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
 	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
 	return ioread16(ks->hw_addr);
 }
@@ -181,7 +225,7 @@ static u16 ks_rdreg16(struct ks_net *ks, int offset)
 
 static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
 {
-	ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
+	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
 	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
 	iowrite16(value, ks->hw_addr);
 }
@@ -197,7 +241,7 @@ static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len)
 {
 	len >>= 1;
 	while (len--)
-		*wptr++ = be16_to_cpu(ioread16(ks->hw_addr));
+		*wptr++ = (u16)ioread16(ks->hw_addr);
 }
 
 /**
@@ -211,7 +255,7 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
 {
 	len >>= 1;
 	while (len--)
-		iowrite16(cpu_to_be16(*wptr++), ks->hw_addr);
+		iowrite16(*wptr++, ks->hw_addr);
 }
 
 static void ks_disable_int(struct ks_net *ks)
@@ -1218,6 +1262,10 @@ static int ks8851_probe(struct platform_device *pdev)
 		goto err_free;
 	}
 
+	err = ks_check_endian(ks);
+	if (err)
+		goto err_free;
+
 	netdev->irq = platform_get_irq(pdev, 0);
 
 	if ((int)netdev->irq < 0) {
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index 07f9067affc6..cda5b0a9e948 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1720,7 +1720,7 @@ static int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_d
 
 	ahw->reset.seq_error = 0;
 	ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL);
-	if (p_dev->ahw->reset.buff == NULL)
+	if (ahw->reset.buff == NULL)
 		return -ENOMEM;
 
 	p_buff = p_dev->ahw->reset.buff;
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 7949ec63a92f..9971135a7ab5 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -5182,6 +5182,13 @@ static int r8169_mdio_register(struct rtl8169_private *tp)
 	if (!tp->phydev) {
 		mdiobus_unregister(new_bus);
 		return -ENODEV;
+	} else if (!tp->phydev->drv) {
+		/* Most chip versions fail with the genphy driver.
+		 * Therefore ensure that the dedicated PHY driver is loaded.
+		 */
+		dev_err(&pdev->dev, "realtek.ko not loaded, maybe it needs to be added to initramfs?\n");
+		mdiobus_unregister(new_bus);
+		return -EUNATCH;
 	}
 
 	/* PHY will be woken up in rtl_open() */
@@ -5344,15 +5351,6 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct net_device *dev;
 	u16 xid;
 
-	/* Some tools for creating an initramfs don't consider softdeps, then
-	 * r8169.ko may be in initramfs, but realtek.ko not. Then the generic
-	 * PHY driver is used that doesn't work with most chip versions.
-	 */
-	if (!driver_find("RTL8201CP Ethernet", &mdio_bus_type)) {
-		dev_err(&pdev->dev, "realtek.ko not loaded, maybe it needs to be added to initramfs?\n");
-		return -ENOENT;
-	}
-
 	dev = devm_alloc_etherdev(&pdev->dev, sizeof (*tp));
 	if (!dev)
 		return -ENOMEM;