Merge tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo:

mxs device tree changes for 3.11:

* A couple of new board support, cfa10055 and cfa10057
* A few updates on cfa10036 device tree source
* Some auart pinctrl data addition
* Adopt soc bus infrastructure for mach-mxs

* tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree
  ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree
  ARM: cfa10049: Switch the chip select pin of the LCD controller
  ARM: cfa10036: Add USB0 OTG port
  ARM: dts: apf28dev: Add touchscreen support for APF28dev
  ARM: mxs: Fix UARTs on M28EVK
  ARM: cfa10036: dt: Change i2c0 clock frequency
  ARM: dts: cfa10036: Change the OLED display to SSD1306
  ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi
  ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi
  ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi
  ARM: mxs: Use soc bus infrastructure
  ARM: dts: mx28: Adjust the digctl compatible string
  ARM: mxs: Remove init_irq declaration in machine description

Includes an update to 3.10-rc6

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

6 files changed, 38 insertions, 16 deletions

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 0f493c8dc28b..c777b9013164 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -1800,6 +1800,9 @@ static int tg3_poll_fw(struct tg3 *tp)
 	int i;
 	u32 val;
 
+	if (tg3_flag(tp, NO_FWARE_REPORTED))
+		return 0;
+
 	if (tg3_flag(tp, IS_SSB_CORE)) {
 		/* We don't use firmware. */
 		return 0;
@@ -10404,6 +10407,13 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy)
  */
 static int tg3_init_hw(struct tg3 *tp, bool reset_phy)
 {
+	/* Chip may have been just powered on. If so, the boot code may still
+	 * be running initialization. Wait for it to finish to avoid races in
+	 * accessing the hardware.
+	 */
+	tg3_enable_register_access(tp);
+	tg3_poll_fw(tp);
+
 	tg3_switch_clocks(tp);
 
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
index 28a5e425fecf..92306b320840 100644
--- a/drivers/net/ethernet/dec/tulip/interrupt.c
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
@@ -76,6 +76,12 @@ int tulip_refill_rx(struct net_device *dev)
 
 			mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
 						 PCI_DMA_FROMDEVICE);
+			if (dma_mapping_error(&tp->pdev->dev, mapping)) {
+				dev_kfree_skb(skb);
+				tp->rx_buffers[entry].skb = NULL;
+				break;
+			}
+
 			tp->rx_buffers[entry].mapping = mapping;
 
 			tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 8bc1b21b1c79..a0b4be51f0d1 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4262,6 +4262,9 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 		netdev->features |= NETIF_F_HIGHDMA;
 	} else {
 		status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+		if (!status)
+			status = dma_set_coherent_mask(&pdev->dev,
+						       DMA_BIT_MASK(32));
 		if (status) {
 			dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
 			goto free_netdev;
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 42e9dd05c936..5e3982fc5398 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -897,8 +897,8 @@ static int sh_eth_check_reset(struct net_device *ndev)
 		mdelay(1);
 		cnt--;
 	}
-	if (cnt < 0) {
-		pr_err("Device reset fail\n");
+	if (cnt <= 0) {
+		pr_err("Device reset failed\n");
 		ret = -ETIMEDOUT;
 	}
 	return ret;
@@ -1401,16 +1401,23 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status)
 		desc_status = edmac_to_cpu(mdp, rxdesc->status);
 		pkt_len = rxdesc->frame_length;
 
-#if defined(CONFIG_ARCH_R8A7740)
-		desc_status >>= 16;
-#endif
-
 		if (--boguscnt < 0)
 			break;
 
 		if (!(desc_status & RDFEND))
 			ndev->stats.rx_length_errors++;
 
+#if defined(CONFIG_ARCH_R8A7740)
+		/*
+		 * In case of almost all GETHER/ETHERs, the Receive Frame State
+		 * (RFS) bits in the Receive Descriptor 0 are from bit 9 to
+		 * bit 0. However, in case of the R8A7740's GETHER, the RFS
+		 * bits are from bit 25 to bit 16. So, the driver needs right
+		 * shifting by 16.
+		 */
+		desc_status >>= 16;
+#endif
+
 		if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 |
 				   RD_RFS5 | RD_RFS6 | RD_RFS10)) {
 			ndev->stats.rx_errors++;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 618446ae1ec1..ee919ca8b8a0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1899,7 +1899,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 #ifdef STMMAC_XMIT_DEBUG
 	if (netif_msg_pktdata(priv)) {
-		pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d"
+		pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d",
 			__func__, (priv->cur_tx % txsize),
 			(priv->dirty_tx % txsize), entry, first, nfrags);
 		if (priv->extend_desc)
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index 12aec173564c..c47f0dbcebb5 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -449,10 +449,9 @@ static int davinci_mdio_suspend(struct device *dev)
 	__raw_writel(ctrl, &data->regs->control);
 	wait_for_idle(data);
 
-	pm_runtime_put_sync(data->dev);
-
 	data->suspended = true;
 	spin_unlock(&data->lock);
+	pm_runtime_put_sync(data->dev);
 
 	return 0;
 }
@@ -460,15 +459,12 @@ static int davinci_mdio_suspend(struct device *dev)
 static int davinci_mdio_resume(struct device *dev)
 {
 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
-	u32 ctrl;
 
-	spin_lock(&data->lock);
 	pm_runtime_get_sync(data->dev);
 
+	spin_lock(&data->lock);
 	/* restart the scan state machine */
-	ctrl = __raw_readl(&data->regs->control);
-	ctrl |= CONTROL_ENABLE;
-	__raw_writel(ctrl, &data->regs->control);
+	__davinci_mdio_reset(data);
 
 	data->suspended = false;
 	spin_unlock(&data->lock);
@@ -477,8 +473,8 @@ static int davinci_mdio_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops davinci_mdio_pm_ops = {
-	.suspend	= davinci_mdio_suspend,
-	.resume		= davinci_mdio_resume,
+	.suspend_late	= davinci_mdio_suspend,
+	.resume_early	= davinci_mdio_resume,
 };
 
 static const struct of_device_id davinci_mdio_of_mtable[] = {