Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...

7 files changed, 347 insertions, 28 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 85c0e41f8021..97035766c291 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -45,6 +45,15 @@ config DWMAC_GENERIC
 	  platform specific code to function or is using platform
 	  data for setup.
 
+config DWMAC_ANARION
+	tristate "Adaptrum Anarion GMAC support"
+	default ARC
+	depends on OF && (ARC || COMPILE_TEST)
+	help
+	  Support for Adaptrum Anarion GMAC Ethernet controller.
+
+	  This selects the Anarion SoC glue layer support for the stmmac driver.
+
 config DWMAC_IPQ806X
 	tristate "QCA IPQ806x DWMAC support"
 	default ARCH_QCOM
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index fd4937a7fcab..238307fadcdb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -7,6 +7,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
 
 # Ordering matters. Generic driver must be last.
 obj-$(CONFIG_STMMAC_PLATFORM)	+= stmmac-platform.o
+obj-$(CONFIG_DWMAC_ANARION)	+= dwmac-anarion.o
 obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
 obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
 obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o dwmac-meson8b.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
new file mode 100644
index 000000000000..85ce80c600c7
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
@@ -0,0 +1,152 @@
+/*
+ * Adaptrum Anarion DWMAC glue layer
+ *
+ * Copyright (C) 2017, Adaptrum, Inc.
+ * (Written by Alexandru Gagniuc <alex.g at adaptrum.com> for Adaptrum, Inc.)
+ * Licensed under the GPLv2 or (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/stmmac.h>
+
+#include "stmmac.h"
+#include "stmmac_platform.h"
+
+#define GMAC_RESET_CONTROL_REG		0
+#define GMAC_SW_CONFIG_REG		4
+#define  GMAC_CONFIG_INTF_SEL_MASK	(0x7 << 0)
+#define  GMAC_CONFIG_INTF_RGMII		(0x1 << 0)
+
+struct anarion_gmac {
+	uintptr_t ctl_block;
+	uint32_t phy_intf_sel;
+};
+
+static uint32_t gmac_read_reg(struct anarion_gmac *gmac, uint8_t reg)
+{
+	return readl((void *)(gmac->ctl_block + reg));
+};
+
+static void gmac_write_reg(struct anarion_gmac *gmac, uint8_t reg, uint32_t val)
+{
+	writel(val, (void *)(gmac->ctl_block + reg));
+}
+
+static int anarion_gmac_init(struct platform_device *pdev, void *priv)
+{
+	uint32_t sw_config;
+	struct anarion_gmac *gmac = priv;
+
+	/* Reset logic, configure interface mode, then release reset. SIMPLE! */
+	gmac_write_reg(gmac, GMAC_RESET_CONTROL_REG, 1);
+
+	sw_config = gmac_read_reg(gmac, GMAC_SW_CONFIG_REG);
+	sw_config &= ~GMAC_CONFIG_INTF_SEL_MASK;
+	sw_config |= (gmac->phy_intf_sel & GMAC_CONFIG_INTF_SEL_MASK);
+	gmac_write_reg(gmac, GMAC_SW_CONFIG_REG, sw_config);
+
+	gmac_write_reg(gmac, GMAC_RESET_CONTROL_REG, 0);
+
+	return 0;
+}
+
+static void anarion_gmac_exit(struct platform_device *pdev, void *priv)
+{
+	struct anarion_gmac *gmac = priv;
+
+	gmac_write_reg(gmac, GMAC_RESET_CONTROL_REG, 1);
+}
+
+static struct anarion_gmac *anarion_config_dt(struct platform_device *pdev)
+{
+	int phy_mode;
+	struct resource *res;
+	void __iomem *ctl_block;
+	struct anarion_gmac *gmac;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	ctl_block = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ctl_block)) {
+		dev_err(&pdev->dev, "Cannot get reset region (%ld)!\n",
+			PTR_ERR(ctl_block));
+		return ctl_block;
+	}
+
+	gmac = devm_kzalloc(&pdev->dev, sizeof(*gmac), GFP_KERNEL);
+	if (!gmac)
+		return ERR_PTR(-ENOMEM);
+
+	gmac->ctl_block = (uintptr_t)ctl_block;
+
+	phy_mode = of_get_phy_mode(pdev->dev.of_node);
+	switch (phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:		/* Fall through */
+	case PHY_INTERFACE_MODE_RGMII_ID	/* Fall through */:
+	case PHY_INTERFACE_MODE_RGMII_RXID:	/* Fall through */
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		gmac->phy_intf_sel = GMAC_CONFIG_INTF_RGMII;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported phy-mode (%d)\n",
+			phy_mode);
+		return ERR_PTR(-ENOTSUPP);
+	}
+
+	return gmac;
+}
+
+static int anarion_dwmac_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct anarion_gmac *gmac;
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	gmac = anarion_config_dt(pdev);
+	if (IS_ERR(gmac))
+		return PTR_ERR(gmac);
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	plat_dat->init = anarion_gmac_init;
+	plat_dat->exit = anarion_gmac_exit;
+	anarion_gmac_init(pdev, gmac);
+	plat_dat->bsp_priv = gmac;
+
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret) {
+		stmmac_remove_config_dt(pdev, plat_dat);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id anarion_dwmac_match[] = {
+	{ .compatible = "adaptrum,anarion-gmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, anarion_dwmac_match);
+
+static struct platform_driver anarion_dwmac_driver = {
+	.probe  = anarion_dwmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "anarion-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = anarion_dwmac_match,
+	},
+};
+module_platform_driver(anarion_dwmac_driver);
+
+MODULE_DESCRIPTION("Adaptrum Anarion DWMAC specific glue layer");
+MODULE_AUTHOR("Alexandru Gagniuc <mr.nuke.me@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 9685555932ea..4404650b32c5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -89,7 +89,7 @@ static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
 	char clk_name[32];
 	const char *clk_div_parents[1];
 	const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
-	static struct clk_div_table clk_25m_div_table[] = {
+	static const struct clk_div_table clk_25m_div_table[] = {
 		{ .val = 0, .div = 5 },
 		{ .val = 1, .div = 10 },
 		{ /* sentinel */ },
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index f0df5193f047..99823f54696a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -41,6 +41,7 @@ struct rk_gmac_ops {
 	void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
 	void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed);
 	void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+	void (*integrated_phy_powerup)(struct rk_priv_data *bsp_priv);
 };
 
 struct rk_priv_data {
@@ -52,6 +53,7 @@ struct rk_priv_data {
 
 	bool clk_enabled;
 	bool clock_input;
+	bool integrated_phy;
 
 	struct clk *clk_mac;
 	struct clk *gmac_clkin;
@@ -61,6 +63,9 @@ struct rk_priv_data {
 	struct clk *clk_mac_refout;
 	struct clk *aclk_mac;
 	struct clk *pclk_mac;
+	struct clk *clk_phy;
+
+	struct reset_control *phy_reset;
 
 	int tx_delay;
 	int rx_delay;
@@ -81,6 +86,8 @@ struct rk_priv_data {
 #define RK3228_GRF_MAC_CON0	0x0900
 #define RK3228_GRF_MAC_CON1	0x0904
 
+#define RK3228_GRF_CON_MUX	0x50
+
 /* RK3228_GRF_MAC_CON0 */
 #define RK3228_GMAC_CLK_RX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 7)
 #define RK3228_GMAC_CLK_TX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 0)
@@ -106,6 +113,9 @@ struct rk_priv_data {
 #define RK3228_GMAC_RXCLK_DLY_ENABLE	GRF_BIT(1)
 #define RK3228_GMAC_RXCLK_DLY_DISABLE	GRF_CLR_BIT(1)
 
+/* RK3228_GRF_COM_MUX */
+#define RK3228_GRF_CON_MUX_GMAC_INTEGRATED_PHY	GRF_BIT(15)
+
 static void rk3228_set_to_rgmii(struct rk_priv_data *bsp_priv,
 				int tx_delay, int rx_delay)
 {
@@ -186,11 +196,18 @@ static void rk3228_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
 		dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
 }
 
+static void rk3228_integrated_phy_powerup(struct rk_priv_data *priv)
+{
+	regmap_write(priv->grf, RK3228_GRF_CON_MUX,
+		     RK3228_GRF_CON_MUX_GMAC_INTEGRATED_PHY);
+}
+
 static const struct rk_gmac_ops rk3228_ops = {
 	.set_to_rgmii = rk3228_set_to_rgmii,
 	.set_to_rmii = rk3228_set_to_rmii,
 	.set_rgmii_speed = rk3228_set_rgmii_speed,
 	.set_rmii_speed = rk3228_set_rmii_speed,
+	.integrated_phy_powerup =  rk3228_integrated_phy_powerup,
 };
 
 #define RK3288_GRF_SOC_CON1	0x0248
@@ -306,6 +323,8 @@ static const struct rk_gmac_ops rk3288_ops = {
 
 #define RK3328_GRF_MAC_CON0	0x0900
 #define RK3328_GRF_MAC_CON1	0x0904
+#define RK3328_GRF_MAC_CON2	0x0908
+#define RK3328_GRF_MACPHY_CON1	0xb04
 
 /* RK3328_GRF_MAC_CON0 */
 #define RK3328_GMAC_CLK_RX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 7)
@@ -332,6 +351,9 @@ static const struct rk_gmac_ops rk3288_ops = {
 #define RK3328_GMAC_RXCLK_DLY_ENABLE	GRF_BIT(1)
 #define RK3328_GMAC_RXCLK_DLY_DISABLE	GRF_CLR_BIT(0)
 
+/* RK3328_GRF_MACPHY_CON1 */
+#define RK3328_MACPHY_RMII_MODE		GRF_BIT(9)
+
 static void rk3328_set_to_rgmii(struct rk_priv_data *bsp_priv,
 				int tx_delay, int rx_delay)
 {
@@ -356,18 +378,19 @@ static void rk3328_set_to_rgmii(struct rk_priv_data *bsp_priv,
 static void rk3328_set_to_rmii(struct rk_priv_data *bsp_priv)
 {
 	struct device *dev = &bsp_priv->pdev->dev;
+	unsigned int reg;
 
 	if (IS_ERR(bsp_priv->grf)) {
 		dev_err(dev, "Missing rockchip,grf property\n");
 		return;
 	}
 
-	regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+	reg = bsp_priv->integrated_phy ? RK3328_GRF_MAC_CON2 :
+		  RK3328_GRF_MAC_CON1;
+
+	regmap_write(bsp_priv->grf, reg,
 		     RK3328_GMAC_PHY_INTF_SEL_RMII |
 		     RK3328_GMAC_RMII_MODE);
-
-	/* set MAC to RMII mode */
-	regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1, GRF_BIT(11));
 }
 
 static void rk3328_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
@@ -395,29 +418,40 @@ static void rk3328_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
 static void rk3328_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
 {
 	struct device *dev = &bsp_priv->pdev->dev;
+	unsigned int reg;
 
 	if (IS_ERR(bsp_priv->grf)) {
 		dev_err(dev, "Missing rockchip,grf property\n");
 		return;
 	}
 
+	reg = bsp_priv->integrated_phy ? RK3328_GRF_MAC_CON2 :
+		  RK3328_GRF_MAC_CON1;
+
 	if (speed == 10)
-		regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+		regmap_write(bsp_priv->grf, reg,
 			     RK3328_GMAC_RMII_CLK_2_5M |
 			     RK3328_GMAC_SPEED_10M);
 	else if (speed == 100)
-		regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+		regmap_write(bsp_priv->grf, reg,
 			     RK3328_GMAC_RMII_CLK_25M |
 			     RK3328_GMAC_SPEED_100M);
 	else
 		dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
 }
 
+static void rk3328_integrated_phy_powerup(struct rk_priv_data *priv)
+{
+	regmap_write(priv->grf, RK3328_GRF_MACPHY_CON1,
+		     RK3328_MACPHY_RMII_MODE);
+}
+
 static const struct rk_gmac_ops rk3328_ops = {
 	.set_to_rgmii = rk3328_set_to_rgmii,
 	.set_to_rmii = rk3328_set_to_rmii,
 	.set_rgmii_speed = rk3328_set_rgmii_speed,
 	.set_rmii_speed = rk3328_set_rmii_speed,
+	.integrated_phy_powerup =  rk3328_integrated_phy_powerup,
 };
 
 #define RK3366_GRF_SOC_CON6	0x0418
@@ -753,9 +787,107 @@ static const struct rk_gmac_ops rk3399_ops = {
 	.set_rmii_speed = rk3399_set_rmii_speed,
 };
 
-static int gmac_clk_init(struct rk_priv_data *bsp_priv)
+#define RV1108_GRF_GMAC_CON0		0X0900
+
+/* RV1108_GRF_GMAC_CON0 */
+#define RV1108_GMAC_PHY_INTF_SEL_RMII	(GRF_CLR_BIT(4) | GRF_CLR_BIT(5) | \
+					GRF_BIT(6))
+#define RV1108_GMAC_FLOW_CTRL		GRF_BIT(3)
+#define RV1108_GMAC_FLOW_CTRL_CLR	GRF_CLR_BIT(3)
+#define RV1108_GMAC_SPEED_10M		GRF_CLR_BIT(2)
+#define RV1108_GMAC_SPEED_100M		GRF_BIT(2)
+#define RV1108_GMAC_RMII_CLK_25M	GRF_BIT(7)
+#define RV1108_GMAC_RMII_CLK_2_5M	GRF_CLR_BIT(7)
+
+static void rv1108_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (IS_ERR(bsp_priv->grf)) {
+		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		return;
+	}
+
+	regmap_write(bsp_priv->grf, RV1108_GRF_GMAC_CON0,
+		     RV1108_GMAC_PHY_INTF_SEL_RMII);
+}
+
+static void rv1108_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (IS_ERR(bsp_priv->grf)) {
+		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		return;
+	}
+
+	if (speed == 10) {
+		regmap_write(bsp_priv->grf, RV1108_GRF_GMAC_CON0,
+			     RV1108_GMAC_RMII_CLK_2_5M |
+			     RV1108_GMAC_SPEED_10M);
+	} else if (speed == 100) {
+		regmap_write(bsp_priv->grf, RV1108_GRF_GMAC_CON0,
+			     RV1108_GMAC_RMII_CLK_25M |
+			     RV1108_GMAC_SPEED_100M);
+	} else {
+		dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+	}
+}
+
+static const struct rk_gmac_ops rv1108_ops = {
+	.set_to_rmii = rv1108_set_to_rmii,
+	.set_rmii_speed = rv1108_set_rmii_speed,
+};
+
+#define RK_GRF_MACPHY_CON0		0xb00
+#define RK_GRF_MACPHY_CON1		0xb04
+#define RK_GRF_MACPHY_CON2		0xb08
+#define RK_GRF_MACPHY_CON3		0xb0c
+
+#define RK_MACPHY_ENABLE		GRF_BIT(0)
+#define RK_MACPHY_DISABLE		GRF_CLR_BIT(0)
+#define RK_MACPHY_CFG_CLK_50M		GRF_BIT(14)
+#define RK_GMAC2PHY_RMII_MODE		(GRF_BIT(6) | GRF_CLR_BIT(7))
+#define RK_GRF_CON2_MACPHY_ID		HIWORD_UPDATE(0x1234, 0xffff, 0)
+#define RK_GRF_CON3_MACPHY_ID		HIWORD_UPDATE(0x35, 0x3f, 0)
+
+static void rk_gmac_integrated_phy_powerup(struct rk_priv_data *priv)
+{
+	if (priv->ops->integrated_phy_powerup)
+		priv->ops->integrated_phy_powerup(priv);
+
+	regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_CFG_CLK_50M);
+	regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_GMAC2PHY_RMII_MODE);
+
+	regmap_write(priv->grf, RK_GRF_MACPHY_CON2, RK_GRF_CON2_MACPHY_ID);
+	regmap_write(priv->grf, RK_GRF_MACPHY_CON3, RK_GRF_CON3_MACPHY_ID);
+
+	if (priv->phy_reset) {
+		/* PHY needs to be disabled before trying to reset it */
+		regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
+		if (priv->phy_reset)
+			reset_control_assert(priv->phy_reset);
+		usleep_range(10, 20);
+		if (priv->phy_reset)
+			reset_control_deassert(priv->phy_reset);
+		usleep_range(10, 20);
+		regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_ENABLE);
+		msleep(30);
+	}
+}
+
+static void rk_gmac_integrated_phy_powerdown(struct rk_priv_data *priv)
+{
+	regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
+	if (priv->phy_reset)
+		reset_control_assert(priv->phy_reset);
+}
+
+static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
 {
+	struct rk_priv_data *bsp_priv = plat->bsp_priv;
 	struct device *dev = &bsp_priv->pdev->dev;
+	int ret;
 
 	bsp_priv->clk_enabled = false;
 
@@ -806,6 +938,16 @@ static int gmac_clk_init(struct rk_priv_data *bsp_priv)
 			clk_set_rate(bsp_priv->clk_mac, 50000000);
 	}
 
+	if (plat->phy_node && bsp_priv->integrated_phy) {
+		bsp_priv->clk_phy = of_clk_get(plat->phy_node, 0);
+		if (IS_ERR(bsp_priv->clk_phy)) {
+			ret = PTR_ERR(bsp_priv->clk_phy);
+			dev_err(dev, "Cannot get PHY clock: %d\n", ret);
+			return -EINVAL;
+		}
+		clk_set_rate(bsp_priv->clk_phy, 50000000);
+	}
+
 	return 0;
 }
 
@@ -829,6 +971,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
 						bsp_priv->clk_mac_refout);
 			}
 
+			if (!IS_ERR(bsp_priv->clk_phy))
+				clk_prepare_enable(bsp_priv->clk_phy);
+
 			if (!IS_ERR(bsp_priv->aclk_mac))
 				clk_prepare_enable(bsp_priv->aclk_mac);
 
@@ -861,6 +1006,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
 						bsp_priv->clk_mac_refout);
 			}
 
+			if (!IS_ERR(bsp_priv->clk_phy))
+				clk_disable_unprepare(bsp_priv->clk_phy);
+
 			if (!IS_ERR(bsp_priv->aclk_mac))
 				clk_disable_unprepare(bsp_priv->aclk_mac);
 
@@ -905,6 +1053,7 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
 }
 
 static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
+					  struct plat_stmmacenet_data *plat,
 					  const struct rk_gmac_ops *ops)
 {
 	struct rk_priv_data *bsp_priv;
@@ -967,9 +1116,22 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
 
 	bsp_priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
 							"rockchip,grf");
-	bsp_priv->pdev = pdev;
 
-	gmac_clk_init(bsp_priv);
+	if (plat->phy_node) {
+		bsp_priv->integrated_phy = of_property_read_bool(plat->phy_node,
+								 "phy-is-integrated");
+		if (bsp_priv->integrated_phy) {
+			bsp_priv->phy_reset = of_reset_control_get(plat->phy_node, NULL);
+			if (IS_ERR(bsp_priv->phy_reset)) {
+				dev_err(&pdev->dev, "No PHY reset control found.\n");
+				bsp_priv->phy_reset = NULL;
+			}
+		}
+	}
+	dev_info(dev, "integrated PHY? (%s).\n",
+		 bsp_priv->integrated_phy ? "yes" : "no");
+
+	bsp_priv->pdev = pdev;
 
 	return bsp_priv;
 }
@@ -1017,6 +1179,9 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
+	if (bsp_priv->integrated_phy)
+		rk_gmac_integrated_phy_powerup(bsp_priv);
+
 	return 0;
 }
 
@@ -1024,6 +1189,9 @@ static void rk_gmac_powerdown(struct rk_priv_data *gmac)
 {
 	struct device *dev = &gmac->pdev->dev;
 
+	if (gmac->integrated_phy)
+		rk_gmac_integrated_phy_powerdown(gmac);
+
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 
@@ -1075,12 +1243,16 @@ static int rk_gmac_probe(struct platform_device *pdev)
 	plat_dat->has_gmac = true;
 	plat_dat->fix_mac_speed = rk_fix_speed;
 
-	plat_dat->bsp_priv = rk_gmac_setup(pdev, data);
+	plat_dat->bsp_priv = rk_gmac_setup(pdev, plat_dat, data);
 	if (IS_ERR(plat_dat->bsp_priv)) {
 		ret = PTR_ERR(plat_dat->bsp_priv);
 		goto err_remove_config_dt;
 	}
 
+	ret = rk_gmac_clk_init(plat_dat);
+	if (ret)
+		return ret;
+
 	ret = rk_gmac_powerup(plat_dat->bsp_priv);
 	if (ret)
 		goto err_remove_config_dt;
@@ -1147,6 +1319,7 @@ static const struct of_device_id rk_gmac_dwmac_match[] = {
 	{ .compatible = "rockchip,rk3366-gmac", .data = &rk3366_ops },
 	{ .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
 	{ .compatible = "rockchip,rk3399-gmac", .data = &rk3399_ops },
+	{ .compatible = "rockchip,rv1108-gmac", .data = &rv1108_ops },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rk_gmac_dwmac_match);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 72ec711fcba2..f5f37bfa1d58 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -248,9 +248,6 @@ int stmmac_mdio_register(struct net_device *ndev)
 	found = 0;
 	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
 		struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);
-		int act = 0;
-		char irq_num[4];
-		char *irq_str;
 
 		if (!phydev)
 			continue;
@@ -273,19 +270,6 @@ int stmmac_mdio_register(struct net_device *ndev)
 		if (priv->plat->phy_addr == -1)
 			priv->plat->phy_addr = addr;
 
-		act = (priv->plat->phy_addr == addr);
-		switch (phydev->irq) {
-		case PHY_POLL:
-			irq_str = "POLL";
-			break;
-		case PHY_IGNORE_INTERRUPT:
-			irq_str = "IGNORE";
-			break;
-		default:
-			sprintf(irq_num, "%d", phydev->irq);
-			irq_str = irq_num;
-			break;
-		}
 		phy_attached_info(phydev);
 		found = 1;
 	}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index d71bd80c5b5b..e471a903c654 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -152,7 +152,7 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
 }
 
 /* structure describing a PTP hardware clock */
-static struct ptp_clock_info stmmac_ptp_clock_ops = {
+static const struct ptp_clock_info stmmac_ptp_clock_ops = {
 	.owner = THIS_MODULE,
 	.name = "stmmac_ptp_clock",
 	.max_adj = 62500000,