sfc: Enable RX DMA scattering where possible

Enable RX DMA scattering iff an RX buffer large enough for the current
MTU will not fit into a single page and the NIC supports DMA
scattering for kernel-mode RX queues.

On Falcon and Siena, the RX_USR_BUF_SIZE field is used as the DMA
limit for both all RX queues with scatter enabled.  Set it to 1824,
matching what Onload uses now.

Maintain a statistic for frames truncated due to lack of descriptors
(rx_nodesc_trunc).  This is distinct from rx_frm_trunc which may be
incremented when scattering is disabled and implies an over-length
frame.

Whenever an MTU change causes scattering to be turned on or off,
update filters that point to the PF queues, but leave others
unchanged, as VF drivers assume scattering is off.

Add n_frags parameters to various functions, and make them iterate:
- efx_rx_packet()
- efx_recycle_rx_buffers()
- efx_rx_mk_skb()
- efx_rx_deliver()

Make efx_handle_rx_event() responsible for updating
efx_rx_queue::removed_count.

Change the RX pipeline state to a starting ring index and number of
fragments, and make __efx_rx_packet() responsible for clearing it.

Based on earlier versions by David Riddoch and Jon Cooper.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

1 files changed, 10 insertions, 7 deletions

diff --git a/drivers/net/ethernet/sfc/falcon.c b/drivers/net/ethernet/sfc/falcon.c
index 49bcd196e10d..4486102fa9b3 100644
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -1546,10 +1546,6 @@ static int falcon_probe_nic(struct efx_nic *efx)
 
 static void falcon_init_rx_cfg(struct efx_nic *efx)
 {
-	/* Prior to Siena the RX DMA engine will split each frame at
-	 * intervals of RX_USR_BUF_SIZE (32-byte units). We set it to
-	 * be so large that that never happens. */
-	const unsigned huge_buf_size = (3 * 4096) >> 5;
 	/* RX control FIFO thresholds (32 entries) */
 	const unsigned ctrl_xon_thr = 20;
 	const unsigned ctrl_xoff_thr = 25;
@@ -1557,10 +1553,15 @@ static void falcon_init_rx_cfg(struct efx_nic *efx)
 
 	efx_reado(efx, &reg, FR_AZ_RX_CFG);
 	if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) {
-		/* Data FIFO size is 5.5K */
+		/* Data FIFO size is 5.5K.  The RX DMA engine only
+		 * supports scattering for user-mode queues, but will
+		 * split DMA writes at intervals of RX_USR_BUF_SIZE
+		 * (32-byte units) even for kernel-mode queues.  We
+		 * set it to be so large that that never happens.
+		 */
 		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_DESC_PUSH_EN, 0);
 		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_USR_BUF_SIZE,
-				    huge_buf_size);
+				    (3 * 4096) >> 5);
 		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_MAC_TH, 512 >> 8);
 		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_MAC_TH, 2048 >> 8);
 		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_TX_TH, ctrl_xon_thr);
@@ -1569,7 +1570,7 @@ static void falcon_init_rx_cfg(struct efx_nic *efx)
 		/* Data FIFO size is 80K; register fields moved */
 		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_DESC_PUSH_EN, 0);
 		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_USR_BUF_SIZE,
-				    huge_buf_size);
+				    EFX_RX_USR_BUF_SIZE >> 5);
 		/* Send XON and XOFF at ~3 * max MTU away from empty/full */
 		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_MAC_TH, 27648 >> 8);
 		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_MAC_TH, 54272 >> 8);
@@ -1815,6 +1816,7 @@ const struct efx_nic_type falcon_a1_nic_type = {
 	.evq_rptr_tbl_base = FR_AA_EVQ_RPTR_KER,
 	.max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH),
 	.rx_buffer_padding = 0x24,
+	.can_rx_scatter = false,
 	.max_interrupt_mode = EFX_INT_MODE_MSI,
 	.phys_addr_channels = 4,
 	.timer_period_max =  1 << FRF_AB_TC_TIMER_VAL_WIDTH,
@@ -1865,6 +1867,7 @@ const struct efx_nic_type falcon_b0_nic_type = {
 	.max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH),
 	.rx_buffer_hash_size = 0x10,
 	.rx_buffer_padding = 0,
+	.can_rx_scatter = true,
 	.max_interrupt_mode = EFX_INT_MODE_MSIX,
 	.phys_addr_channels = 32, /* Hardware limit is 64, but the legacy
 				   * interrupt handler only supports 32