diff options
author | Florian Fainelli <florian@openwrt.org> | 2013-03-22 07:39:27 +0400 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2013-03-22 18:25:15 +0400 |
commit | 2ec985213864cb64c45dc0284d7316142eefb5d4 (patch) | |
tree | 376fb2e4758ab5e7a75f8ec935cf2f24074f671f /drivers/net/ethernet/marvell/mvmdio.c | |
parent | 3712b71769578fd39481ce02e1e8cea3c4f8370f (diff) | |
download | linux-2ec985213864cb64c45dc0284d7316142eefb5d4.tar.xz |
net: mvmdio: enhance driver to support SMI error/done interrupts
This patch enhances the "mvmdio" to support a SMI error/done interrupt
line which can be used along with a wait queue instead of doing
busy-waiting on the registers. This is a feature which is available in
the mv643xx_eth SMI code and thus reduces again the gap between the two.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/marvell/mvmdio.c')
-rw-r--r-- | drivers/net/ethernet/marvell/mvmdio.c | 98 |
1 files changed, 80 insertions, 18 deletions
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c index 3e2711d22451..3472574602b2 100644 --- a/drivers/net/ethernet/marvell/mvmdio.c +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -24,10 +24,13 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/phy.h> +#include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/of_mdio.h> +#include <linux/sched.h> +#include <linux/wait.h> #define MVMDIO_SMI_DATA_SHIFT 0 #define MVMDIO_SMI_PHY_ADDR_SHIFT 16 @@ -36,33 +39,58 @@ #define MVMDIO_SMI_WRITE_OPERATION 0 #define MVMDIO_SMI_READ_VALID BIT(27) #define MVMDIO_SMI_BUSY BIT(28) +#define MVMDIO_ERR_INT_CAUSE 0x007C +#define MVMDIO_ERR_INT_SMI_DONE 0x00000010 +#define MVMDIO_ERR_INT_MASK 0x0080 struct orion_mdio_dev { struct mutex lock; void __iomem *regs; + /* + * If we have access to the error interrupt pin (which is + * somewhat misnamed as it not only reflects internal errors + * but also reflects SMI completion), use that to wait for + * SMI access completion instead of polling the SMI busy bit. + */ + int err_interrupt; + wait_queue_head_t smi_busy_wait; }; +static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev) +{ + return !(readl(dev->regs) & MVMDIO_SMI_BUSY); +} + /* Wait for the SMI unit to be ready for another operation */ static int orion_mdio_wait_ready(struct mii_bus *bus) { struct orion_mdio_dev *dev = bus->priv; int count; - u32 val; - count = 0; - while (1) { - val = readl(dev->regs); - if (!(val & MVMDIO_SMI_BUSY)) - break; + if (dev->err_interrupt <= 0) { + count = 0; + while (1) { + if (orion_mdio_smi_is_done(dev)) + break; - if (count > 100) { - dev_err(bus->parent, "Timeout: SMI busy for too long\n"); - return -ETIMEDOUT; - } + if (count > 100) { + dev_err(bus->parent, + "Timeout: SMI busy for too long\n"); + return -ETIMEDOUT; + } - udelay(10); - count++; + udelay(10); + count++; + } + } else { + if (!orion_mdio_smi_is_done(dev)) { + wait_event_timeout(dev->smi_busy_wait, + orion_mdio_smi_is_done(dev), + msecs_to_jiffies(100)); + if (!orion_mdio_smi_is_done(dev)) + return -ETIMEDOUT; + } } return 0; @@ -141,6 +169,21 @@ static int orion_mdio_reset(struct mii_bus *bus) return 0; } +static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id) +{ + struct orion_mdio_dev *dev = dev_id; + + if (readl(dev->regs + MVMDIO_ERR_INT_CAUSE) & + MVMDIO_ERR_INT_SMI_DONE) { + writel(~MVMDIO_ERR_INT_SMI_DONE, + dev->regs + MVMDIO_ERR_INT_CAUSE); + wake_up(&dev->smi_busy_wait); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + static int orion_mdio_probe(struct platform_device *pdev) { struct resource *r; @@ -181,9 +224,22 @@ static int orion_mdio_probe(struct platform_device *pdev) dev->regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (!dev->regs) { dev_err(&pdev->dev, "Unable to remap SMI register\n"); - kfree(bus->irq); - mdiobus_free(bus); - return -ENODEV; + ret = -ENODEV; + goto out_mdio; + } + + init_waitqueue_head(&dev->smi_busy_wait); + + dev->err_interrupt = platform_get_irq(pdev, 0); + if (dev->err_interrupt != -ENXIO) { + ret = devm_request_irq(&pdev->dev, dev->err_interrupt, + orion_mdio_err_irq, + IRQF_SHARED, pdev->name, dev); + if (ret) + goto out_mdio; + + writel(MVMDIO_ERR_INT_SMI_DONE, + dev->regs + MVMDIO_ERR_INT_MASK); } mutex_init(&dev->lock); @@ -194,19 +250,25 @@ static int orion_mdio_probe(struct platform_device *pdev) ret = mdiobus_register(bus); if (ret < 0) { dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret); - kfree(bus->irq); - mdiobus_free(bus); - return ret; + goto out_mdio; } platform_set_drvdata(pdev, bus); return 0; + +out_mdio: + kfree(bus->irq); + mdiobus_free(bus); + return ret; } static int orion_mdio_remove(struct platform_device *pdev) { struct mii_bus *bus = platform_get_drvdata(pdev); + struct orion_mdio_dev *dev = bus->priv; + + writel(0, dev->regs + MVMDIO_ERR_INT_MASK); mdiobus_unregister(bus); kfree(bus->irq); mdiobus_free(bus); |