ice: Implement transmit and NAPI support

This patch implements ice_start_xmit (the handler for ndo_start_xmit) and
related functions. ice_start_xmit ultimately calls ice_tx_map, where the
Tx descriptor is built and posted to the hardware by bumping the ring tail.

This patch also implements ice_napi_poll, which is invoked when there's an
interrupt on the VSI's queues. The interrupt can be due to either a
completed Tx or an Rx event. In case of a completed Tx/Rx event, resources
are reclaimed. Additionally, in case of an Rx event, the skb is fetched
and passed up to the network stack.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 45 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index b7015cfad2d7..8fa4450514b4 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -7,8 +7,23 @@
 #define ICE_DFLT_IRQ_WORK	256
 #define ICE_RXBUF_2048		2048
 #define ICE_MAX_CHAINED_RX_BUFS	5
+#define ICE_MAX_BUF_TXD		8
+#define ICE_MIN_TX_LEN		17
+
+/* The size limit for a transmit buffer in a descriptor is (16K - 1).
+ * In order to align with the read requests we will align the value to
+ * the nearest 4K which represents our maximum read request size.
+ */
+#define ICE_MAX_READ_REQ_SIZE	4096
+#define ICE_MAX_DATA_PER_TXD	(16 * 1024 - 1)
+#define ICE_MAX_DATA_PER_TXD_ALIGNED \
+	(~(ICE_MAX_READ_REQ_SIZE - 1) & ICE_MAX_DATA_PER_TXD)
+
+#define ICE_RX_BUF_WRITE	16	/* Must be power of 2 */
 #define ICE_MAX_TXQ_PER_TXQG	128
 
+/* Tx Descriptors needed, worst case */
+#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
 #define ICE_DESC_UNUSED(R)	\
 	((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
 	(R)->next_to_clean - (R)->next_to_use - 1)
@@ -30,6 +45,24 @@ struct ice_rx_buf {
 	unsigned int page_offset;
 };
 
+struct ice_q_stats {
+	u64 pkts;
+	u64 bytes;
+};
+
+struct ice_txq_stats {
+	u64 restart_q;
+	u64 tx_busy;
+	u64 tx_linearize;
+};
+
+struct ice_rxq_stats {
+	u64 non_eop_descs;
+	u64 alloc_page_failed;
+	u64 alloc_buf_failed;
+	u64 page_reuse_count;
+};
+
 /* this enum matches hardware bits and is meant to be used by DYN_CTLN
  * registers and QINT registers or more generally anywhere in the manual
  * mentioning ITR_INDX, ITR_NONE cannot be used as an index 'n' into any
@@ -94,6 +127,15 @@ struct ice_ring {
 	u16 next_to_clean;
 
 	bool ring_active;		/* is ring online or not */
+
+	/* stats structs */
+	struct ice_q_stats	stats;
+	struct u64_stats_sync syncp;
+	union {
+		struct ice_txq_stats tx_stats;
+		struct ice_rxq_stats rx_stats;
+	};
+
 	unsigned int size;		/* length of descriptor ring in bytes */
 	dma_addr_t dma;			/* physical address of ring */
 	struct rcu_head rcu;		/* to avoid race on free */
@@ -121,10 +163,13 @@ struct ice_ring_container {
 	for (pos = (head).ring; pos; pos = pos->next)
 
 bool ice_alloc_rx_bufs(struct ice_ring *rxr, u16 cleaned_count);
+netdev_tx_t ice_start_xmit(struct sk_buff *skb, struct net_device *netdev);
 void ice_clean_tx_ring(struct ice_ring *tx_ring);
 void ice_clean_rx_ring(struct ice_ring *rx_ring);
 int ice_setup_tx_ring(struct ice_ring *tx_ring);
 int ice_setup_rx_ring(struct ice_ring *rx_ring);
 void ice_free_tx_ring(struct ice_ring *tx_ring);
 void ice_free_rx_ring(struct ice_ring *rx_ring);
+int ice_napi_poll(struct napi_struct *napi, int budget);
+
 #endif /* _ICE_TXRX_H_ */