diff options
| author | Ioana Ciornei <ioana.ciornei@nxp.com> | 2019-10-31 02:18:31 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2019-11-01 00:19:45 +0300 |
| commit | 71947923089353f23f4f210864903c4dcf2c1696 (patch) | |
| tree | a8f14abd6236be20867f758535c1f820696bebd0 /drivers/net/ethernet/freescale/dpaa2/Makefile | |
| parent | f5c3fffa4c18783edc3954b7b4c6e0893345c478 (diff) | |
| download | linux-71947923089353f23f4f210864903c4dcf2c1696.tar.xz | |
dpaa2-eth: add MAC/PHY support through phylink
The dpaa2-eth driver now has support for connecting to its associated
PHY device found through standard OF bindings.
This happens when the DPNI object (that the driver probes on) gets
connected to a DPMAC. When that happens, the device tree is looked up by
the DPMAC ID, and the associated PHY bindings are found.
The old logic of handling the net device's link state by hand still
needs to be kept, as the DPNI can be connected to other devices on the
bus than a DPMAC: other DPNI, DPSW ports, etc. This logic is only
engaged when there is no DPMAC (and therefore no phylink instance)
attached.
The MC firmware support multiple type of DPMAC links: TYPE_FIXED,
TYPE_PHY. The TYPE_FIXED mode does not require any DPMAC management from
Linux side, and as such, the driver will not handle such a DPMAC.
Although PHYLINK typically handles SFP cages and in-band AN modes, for
the moment the driver only supports the RGMII interfaces found on the
LX2160A. Support for other modes will come later.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/freescale/dpaa2/Makefile')
| -rw-r--r-- | drivers/net/ethernet/freescale/dpaa2/Makefile | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/net/ethernet/freescale/dpaa2/Makefile b/drivers/net/ethernet/freescale/dpaa2/Makefile index d1e78cdd512f..69184ca3b7b9 100644 --- a/drivers/net/ethernet/freescale/dpaa2/Makefile +++ b/drivers/net/ethernet/freescale/dpaa2/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_FSL_DPAA2_ETH) += fsl-dpaa2-eth.o obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += fsl-dpaa2-ptp.o -fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o +fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o dpaa2-mac.o dpmac.o fsl-dpaa2-eth-${CONFIG_DEBUG_FS} += dpaa2-eth-debugfs.o fsl-dpaa2-ptp-objs := dpaa2-ptp.o dprtc.o |