ewrk3/tulip: Move the DEC - Tulip drivers

Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/
and make the necessary Kconfig and Makefile changes.

The Digital Equioment (DEC) driver ewrk3 was moved into
drivers/net/ethernet/dec/ and the remaining drivers (Tulip)
were moved into drivers/net/ethernet/dec/tulip/

CC: Tobias Ringstrom <tori@unhappy.mine.nu>
CC: Grant Grundler <grundler@parisc-linux.org>
CC: David Davies <davies@maniac.ultranet.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>

1 files changed, 1670 insertions, 0 deletions

diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
new file mode 100644
index 000000000000..862eadf07191
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -0,0 +1,1670 @@
+/* winbond-840.c: A Linux PCI network adapter device driver. */
+/*
+	Written 1998-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	Support and updates available at
+	http://www.scyld.com/network/drivers.html
+
+	Do not remove the copyright information.
+	Do not change the version information unless an improvement has been made.
+	Merely removing my name, as Compex has done in the past, does not count
+	as an improvement.
+
+	Changelog:
+	* ported to 2.4
+		???
+	* spin lock update, memory barriers, new style dma mappings
+		limit each tx buffer to < 1024 bytes
+		remove DescIntr from Rx descriptors (that's an Tx flag)
+		remove next pointer from Tx descriptors
+		synchronize tx_q_bytes
+		software reset in tx_timeout
+			Copyright (C) 2000 Manfred Spraul
+	* further cleanups
+		power management.
+		support for big endian descriptors
+			Copyright (C) 2001 Manfred Spraul
+  	* ethtool support (jgarzik)
+	* Replace some MII-related magic numbers with constants (jgarzik)
+
+	TODO:
+	* enable pci_power_off
+	* Wake-On-LAN
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME	"winbond-840"
+#define DRV_VERSION	"1.01-e"
+#define DRV_RELDATE	"Sep-11-2006"
+
+
+/* Automatically extracted configuration info:
+probe-func: winbond840_probe
+config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840
+
+c-help-name: Winbond W89c840 PCI Ethernet support
+c-help-symbol: CONFIG_WINBOND_840
+c-help: This driver is for the Winbond W89c840 chip.  It also works with
+c-help: the TX9882 chip on the Compex RL100-ATX board.
+c-help: More specific information and updates are available from
+c-help: http://www.scyld.com/network/drivers.html
+*/
+
+/* The user-configurable values.
+   These may be modified when a driver module is loaded.*/
+
+static int debug = 1;			/* 1 normal messages, 0 quiet .. 7 verbose. */
+static int max_interrupt_work = 20;
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+   The '840 uses a 64 element hash table based on the Ethernet CRC.  */
+static int multicast_filter_limit = 32;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1518 effectively disables this feature. */
+static int rx_copybreak;
+
+/* Used to pass the media type, etc.
+   Both 'options[]' and 'full_duplex[]' should exist for driver
+   interoperability.
+   The media type is usually passed in 'options[]'.
+*/
+#define MAX_UNITS 8		/* More are supported, limit only on options */
+static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+   The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+   Making the Tx ring too large decreases the effectiveness of channel
+   bonding and packet priority.
+   There are no ill effects from too-large receive rings. */
+#define TX_QUEUE_LEN	10		/* Limit ring entries actually used.  */
+#define TX_QUEUE_LEN_RESTART	5
+
+#define TX_BUFLIMIT	(1024-128)
+
+/* The presumed FIFO size for working around the Tx-FIFO-overflow bug.
+   To avoid overflowing we don't queue again until we have room for a
+   full-size packet.
+ */
+#define TX_FIFO_SIZE (2048)
+#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16)
+
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (2*HZ)
+
+/* Include files, designed to support most kernel versions 2.0.0 and later. */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/rtnetlink.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>		/* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "tulip.h"
+
+#undef PKT_BUF_SZ			/* tulip.h also defines this */
+#define PKT_BUF_SZ		1536	/* Size of each temporary Rx buffer.*/
+
+/* These identify the driver base version and may not be removed. */
+static const char version[] __initconst =
+	"v" DRV_VERSION " (2.4 port) "
+	DRV_RELDATE "  Donald Becker <becker@scyld.com>\n"
+	"  http://www.scyld.com/network/drivers.html\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(max_interrupt_work, int, 0);
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(multicast_filter_limit, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+MODULE_PARM_DESC(max_interrupt_work, "winbond-840 maximum events handled per interrupt");
+MODULE_PARM_DESC(debug, "winbond-840 debug level (0-6)");
+MODULE_PARM_DESC(rx_copybreak, "winbond-840 copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(multicast_filter_limit, "winbond-840 maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(options, "winbond-840: Bits 0-3: media type, bit 17: full duplex");
+MODULE_PARM_DESC(full_duplex, "winbond-840 full duplex setting(s) (1)");
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This driver is for the Winbond w89c840 chip.
+
+II. Board-specific settings
+
+None.
+
+III. Driver operation
+
+This chip is very similar to the Digital 21*4* "Tulip" family.  The first
+twelve registers and the descriptor format are nearly identical.  Read a
+Tulip manual for operational details.
+
+A significant difference is that the multicast filter and station address are
+stored in registers rather than loaded through a pseudo-transmit packet.
+
+Unlike the Tulip, transmit buffers are limited to 1KB.  To transmit a
+full-sized packet we must use both data buffers in a descriptor.  Thus the
+driver uses ring mode where descriptors are implicitly sequential in memory,
+rather than using the second descriptor address as a chain pointer to
+subsequent descriptors.
+
+IV. Notes
+
+If you are going to almost clone a Tulip, why not go all the way and avoid
+the need for a new driver?
+
+IVb. References
+
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+http://www.winbond.com.tw/
+
+IVc. Errata
+
+A horrible bug exists in the transmit FIFO.  Apparently the chip doesn't
+correctly detect a full FIFO, and queuing more than 2048 bytes may result in
+silent data corruption.
+
+Test with 'ping -s 10000' on a fast computer.
+
+*/
+
+
+
+/*
+  PCI probe table.
+*/
+enum chip_capability_flags {
+	CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(w840_pci_tbl) = {
+	{ 0x1050, 0x0840, PCI_ANY_ID, 0x8153,     0, 0, 0 },
+	{ 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+	{ 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, w840_pci_tbl);
+
+enum {
+	netdev_res_size		= 128,	/* size of PCI BAR resource */
+};
+
+struct pci_id_info {
+        const char *name;
+        int drv_flags;		/* Driver use, intended as capability flags. */
+};
+
+static const struct pci_id_info pci_id_tbl[] __devinitdata = {
+	{ 				/* Sometime a Level-One switch card. */
+	  "Winbond W89c840",	CanHaveMII | HasBrokenTx | FDXOnNoMII},
+	{ "Winbond W89c840",	CanHaveMII | HasBrokenTx},
+	{ "Compex RL100-ATX",	CanHaveMII | HasBrokenTx},
+	{ }	/* terminate list. */
+};
+
+/* This driver was written to use PCI memory space, however some x86 systems
+   work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config
+*/
+
+/* Offsets to the Command and Status Registers, "CSRs".
+   While similar to the Tulip, these registers are longword aligned.
+   Note: It's not useful to define symbolic names for every register bit in
+   the device.  The name can only partially document the semantics and make
+   the driver longer and more difficult to read.
+*/
+enum w840_offsets {
+	PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08,
+	RxRingPtr=0x0C, TxRingPtr=0x10,
+	IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C,
+	RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C,
+	CurRxDescAddr=0x30, CurRxBufAddr=0x34,			/* Debug use */
+	MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40,
+	CurTxDescAddr=0x4C, CurTxBufAddr=0x50,
+};
+
+/* Bits in the NetworkConfig register. */
+enum rx_mode_bits {
+	AcceptErr=0x80,
+	RxAcceptBroadcast=0x20, AcceptMulticast=0x10,
+	RxAcceptAllPhys=0x08, AcceptMyPhys=0x02,
+};
+
+enum mii_reg_bits {
+	MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000,
+	MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000,
+};
+
+/* The Tulip Rx and Tx buffer descriptors. */
+struct w840_rx_desc {
+	s32 status;
+	s32 length;
+	u32 buffer1;
+	u32 buffer2;
+};
+
+struct w840_tx_desc {
+	s32 status;
+	s32 length;
+	u32 buffer1, buffer2;
+};
+
+#define MII_CNT		1 /* winbond only supports one MII */
+struct netdev_private {
+	struct w840_rx_desc *rx_ring;
+	dma_addr_t	rx_addr[RX_RING_SIZE];
+	struct w840_tx_desc *tx_ring;
+	dma_addr_t	tx_addr[TX_RING_SIZE];
+	dma_addr_t ring_dma_addr;
+	/* The addresses of receive-in-place skbuffs. */
+	struct sk_buff* rx_skbuff[RX_RING_SIZE];
+	/* The saved address of a sent-in-place packet/buffer, for later free(). */
+	struct sk_buff* tx_skbuff[TX_RING_SIZE];
+	struct net_device_stats stats;
+	struct timer_list timer;	/* Media monitoring timer. */
+	/* Frequently used values: keep some adjacent for cache effect. */
+	spinlock_t lock;
+	int chip_id, drv_flags;
+	struct pci_dev *pci_dev;
+	int csr6;
+	struct w840_rx_desc *rx_head_desc;
+	unsigned int cur_rx, dirty_rx;		/* Producer/consumer ring indices */
+	unsigned int rx_buf_sz;				/* Based on MTU+slack. */
+	unsigned int cur_tx, dirty_tx;
+	unsigned int tx_q_bytes;
+	unsigned int tx_full;				/* The Tx queue is full. */
+	/* MII transceiver section. */
+	int mii_cnt;						/* MII device addresses. */
+	unsigned char phys[MII_CNT];		/* MII device addresses, but only the first is used */
+	u32 mii;
+	struct mii_if_info mii_if;
+	void __iomem *base_addr;
+};
+
+static int  eeprom_read(void __iomem *ioaddr, int location);
+static int  mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int  netdev_open(struct net_device *dev);
+static int  update_link(struct net_device *dev);
+static void netdev_timer(unsigned long data);
+static void init_rxtx_rings(struct net_device *dev);
+static void free_rxtx_rings(struct netdev_private *np);
+static void init_registers(struct net_device *dev);
+static void tx_timeout(struct net_device *dev);
+static int alloc_ringdesc(struct net_device *dev);
+static void free_ringdesc(struct netdev_private *np);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t intr_handler(int irq, void *dev_instance);
+static void netdev_error(struct net_device *dev, int intr_status);
+static int  netdev_rx(struct net_device *dev);
+static u32 __set_rx_mode(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static struct net_device_stats *get_stats(struct net_device *dev);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static const struct ethtool_ops netdev_ethtool_ops;
+static int  netdev_close(struct net_device *dev);
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= netdev_open,
+	.ndo_stop		= netdev_close,
+	.ndo_start_xmit		= start_tx,
+	.ndo_get_stats		= get_stats,
+	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_do_ioctl		= netdev_ioctl,
+	.ndo_tx_timeout		= tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int __devinit w840_probe1 (struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct netdev_private *np;
+	static int find_cnt;
+	int chip_idx = ent->driver_data;
+	int irq;
+	int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
+	void __iomem *ioaddr;
+
+	i = pci_enable_device(pdev);
+	if (i) return i;
+
+	pci_set_master(pdev);
+
+	irq = pdev->irq;
+
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		pr_warn("Device %s disabled due to DMA limitations\n",
+			pci_name(pdev));
+		return -EIO;
+	}
+	dev = alloc_etherdev(sizeof(*np));
+	if (!dev)
+		return -ENOMEM;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	if (pci_request_regions(pdev, DRV_NAME))
+		goto err_out_netdev;
+
+	ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size);
+	if (!ioaddr)
+		goto err_out_free_res;
+
+	for (i = 0; i < 3; i++)
+		((__le16 *)dev->dev_addr)[i] = cpu_to_le16(eeprom_read(ioaddr, i));
+
+	/* Reset the chip to erase previous misconfiguration.
+	   No hold time required! */
+	iowrite32(0x00000001, ioaddr + PCIBusCfg);
+
+	dev->base_addr = (unsigned long)ioaddr;
+	dev->irq = irq;
+
+	np = netdev_priv(dev);
+	np->pci_dev = pdev;
+	np->chip_id = chip_idx;
+	np->drv_flags = pci_id_tbl[chip_idx].drv_flags;
+	spin_lock_init(&np->lock);
+	np->mii_if.dev = dev;
+	np->mii_if.mdio_read = mdio_read;
+	np->mii_if.mdio_write = mdio_write;
+	np->base_addr = ioaddr;
+
+	pci_set_drvdata(pdev, dev);
+
+	if (dev->mem_start)
+		option = dev->mem_start;
+
+	/* The lower four bits are the media type. */
+	if (option > 0) {
+		if (option & 0x200)
+			np->mii_if.full_duplex = 1;
+		if (option & 15)
+			dev_info(&dev->dev,
+				 "ignoring user supplied media type %d",
+				 option & 15);
+	}
+	if (find_cnt < MAX_UNITS  &&  full_duplex[find_cnt] > 0)
+		np->mii_if.full_duplex = 1;
+
+	if (np->mii_if.full_duplex)
+		np->mii_if.force_media = 1;
+
+	/* The chip-specific entries in the device structure. */
+	dev->netdev_ops = &netdev_ops;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	i = register_netdev(dev);
+	if (i)
+		goto err_out_cleardev;
+
+	dev_info(&dev->dev, "%s at %p, %pM, IRQ %d\n",
+		 pci_id_tbl[chip_idx].name, ioaddr, dev->dev_addr, irq);
+
+	if (np->drv_flags & CanHaveMII) {
+		int phy, phy_idx = 0;
+		for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+			int mii_status = mdio_read(dev, phy, MII_BMSR);
+			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+				np->phys[phy_idx++] = phy;
+				np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
+				np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+
+						mdio_read(dev, phy, MII_PHYSID2);
+				dev_info(&dev->dev,
+					 "MII PHY %08xh found at address %d, status 0x%04x advertising %04x\n",
+					 np->mii, phy, mii_status,
+					 np->mii_if.advertising);
+			}
+		}
+		np->mii_cnt = phy_idx;
+		np->mii_if.phy_id = np->phys[0];
+		if (phy_idx == 0) {
+			dev_warn(&dev->dev,
+				 "MII PHY not found -- this device may not operate correctly\n");
+		}
+	}
+
+	find_cnt++;
+	return 0;
+
+err_out_cleardev:
+	pci_set_drvdata(pdev, NULL);
+	pci_iounmap(pdev, ioaddr);
+err_out_free_res:
+	pci_release_regions(pdev);
+err_out_netdev:
+	free_netdev (dev);
+	return -ENODEV;
+}
+
+
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.  These are
+   often serial bit streams generated by the host processor.
+   The example below is for the common 93c46 EEPROM, 64 16 bit words. */
+
+/* Delay between EEPROM clock transitions.
+   No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
+   a delay.  Note that pre-2.0.34 kernels had a cache-alignment bug that
+   made udelay() unreliable.
+   The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
+   deprecated.
+*/
+#define eeprom_delay(ee_addr)	ioread32(ee_addr)
+
+enum EEPROM_Ctrl_Bits {
+	EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805,
+	EE_ChipSelect=0x801, EE_DataIn=0x08,
+};
+
+/* The EEPROM commands include the alway-set leading bit. */
+enum EEPROM_Cmds {
+	EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
+};
+
+static int eeprom_read(void __iomem *addr, int location)
+{
+	int i;
+	int retval = 0;
+	void __iomem *ee_addr = addr + EECtrl;
+	int read_cmd = location | EE_ReadCmd;
+	iowrite32(EE_ChipSelect, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 10; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+		iowrite32(dataval, ee_addr);
+		eeprom_delay(ee_addr);
+		iowrite32(dataval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+	iowrite32(EE_ChipSelect, ee_addr);
+	eeprom_delay(ee_addr);
+
+	for (i = 16; i > 0; i--) {
+		iowrite32(EE_ChipSelect | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+		retval = (retval << 1) | ((ioread32(ee_addr) & EE_DataIn) ? 1 : 0);
+		iowrite32(EE_ChipSelect, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	/* Terminate the EEPROM access. */
+	iowrite32(0, ee_addr);
+	return retval;
+}
+
+/*  MII transceiver control section.
+	Read and write the MII registers using software-generated serial
+	MDIO protocol.  See the MII specifications or DP83840A data sheet
+	for details.
+
+	The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+	met by back-to-back 33Mhz PCI cycles. */
+#define mdio_delay(mdio_addr) ioread32(mdio_addr)
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+   This only set with older transceivers, so the extra
+   code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required = 1;
+
+#define MDIO_WRITE0 (MDIO_EnbOutput)
+#define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput)
+
+/* Generate the preamble required for initial synchronization and
+   a few older transceivers. */
+static void mdio_sync(void __iomem *mdio_addr)
+{
+	int bits = 32;
+
+	/* Establish sync by sending at least 32 logic ones. */
+	while (--bits >= 0) {
+		iowrite32(MDIO_WRITE1, mdio_addr);
+		mdio_delay(mdio_addr);
+		iowrite32(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *mdio_addr = np->base_addr + MIICtrl;
+	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	int i, retval = 0;
+
+	if (mii_preamble_required)
+		mdio_sync(mdio_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+		iowrite32(dataval, mdio_addr);
+		mdio_delay(mdio_addr);
+		iowrite32(dataval | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 20; i > 0; i--) {
+		iowrite32(MDIO_EnbIn, mdio_addr);
+		mdio_delay(mdio_addr);
+		retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DataIn) ? 1 : 0);
+		iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	return (retval>>1) & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *mdio_addr = np->base_addr + MIICtrl;
+	int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
+	int i;
+
+	if (location == 4  &&  phy_id == np->phys[0])
+		np->mii_if.advertising = value;
+
+	if (mii_preamble_required)
+		mdio_sync(mdio_addr);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+		iowrite32(dataval, mdio_addr);
+		mdio_delay(mdio_addr);
+		iowrite32(dataval | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	/* Clear out extra bits. */
+	for (i = 2; i > 0; i--) {
+		iowrite32(MDIO_EnbIn, mdio_addr);
+		mdio_delay(mdio_addr);
+		iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+}
+
+
+static int netdev_open(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	int i;
+
+	iowrite32(0x00000001, ioaddr + PCIBusCfg);		/* Reset */
+
+	netif_device_detach(dev);
+	i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
+	if (i)
+		goto out_err;
+
+	if (debug > 1)
+		netdev_dbg(dev, "w89c840_open() irq %d\n", dev->irq);
+
+	if((i=alloc_ringdesc(dev)))
+		goto out_err;
+
+	spin_lock_irq(&np->lock);
+	netif_device_attach(dev);
+	init_registers(dev);
+	spin_unlock_irq(&np->lock);
+
+	netif_start_queue(dev);
+	if (debug > 2)
+		netdev_dbg(dev, "Done netdev_open()\n");
+
+	/* Set the timer to check for link beat. */
+	init_timer(&np->timer);
+	np->timer.expires = jiffies + 1*HZ;
+	np->timer.data = (unsigned long)dev;
+	np->timer.function = netdev_timer;				/* timer handler */
+	add_timer(&np->timer);
+	return 0;
+out_err:
+	netif_device_attach(dev);
+	return i;
+}
+
+#define MII_DAVICOM_DM9101	0x0181b800
+
+static int update_link(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int duplex, fasteth, result, mii_reg;
+
+	/* BSMR */
+	mii_reg = mdio_read(dev, np->phys[0], MII_BMSR);
+
+	if (mii_reg == 0xffff)
+		return np->csr6;
+	/* reread: the link status bit is sticky */
+	mii_reg = mdio_read(dev, np->phys[0], MII_BMSR);
+	if (!(mii_reg & 0x4)) {
+		if (netif_carrier_ok(dev)) {
+			if (debug)
+				dev_info(&dev->dev,
+					 "MII #%d reports no link. Disabling watchdog\n",
+					 np->phys[0]);
+			netif_carrier_off(dev);
+		}
+		return np->csr6;
+	}
+	if (!netif_carrier_ok(dev)) {
+		if (debug)
+			dev_info(&dev->dev,
+				 "MII #%d link is back. Enabling watchdog\n",
+				 np->phys[0]);
+		netif_carrier_on(dev);
+	}
+
+	if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) {
+		/* If the link partner doesn't support autonegotiation
+		 * the MII detects it's abilities with the "parallel detection".
+		 * Some MIIs update the LPA register to the result of the parallel
+		 * detection, some don't.
+		 * The Davicom PHY [at least 0181b800] doesn't.
+		 * Instead bit 9 and 13 of the BMCR are updated to the result
+		 * of the negotiation..
+		 */
+		mii_reg = mdio_read(dev, np->phys[0], MII_BMCR);
+		duplex = mii_reg & BMCR_FULLDPLX;
+		fasteth = mii_reg & BMCR_SPEED100;
+	} else {
+		int negotiated;
+		mii_reg	= mdio_read(dev, np->phys[0], MII_LPA);
+		negotiated = mii_reg & np->mii_if.advertising;
+
+		duplex = (negotiated & LPA_100FULL) || ((negotiated & 0x02C0) == LPA_10FULL);
+		fasteth = negotiated & 0x380;
+	}
+	duplex |= np->mii_if.force_media;
+	/* remove fastether and fullduplex */
+	result = np->csr6 & ~0x20000200;
+	if (duplex)
+		result |= 0x200;
+	if (fasteth)
+		result |= 0x20000000;
+	if (result != np->csr6 && debug)
+		dev_info(&dev->dev,
+			 "Setting %dMBit-%s-duplex based on MII#%d\n",
+			 fasteth ? 100 : 10, duplex ? "full" : "half",
+			 np->phys[0]);
+	return result;
+}
+
+#define RXTX_TIMEOUT	2000
+static inline void update_csr6(struct net_device *dev, int new)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	int limit = RXTX_TIMEOUT;
+
+	if (!netif_device_present(dev))
+		new = 0;
+	if (new==np->csr6)
+		return;
+	/* stop both Tx and Rx processes */
+	iowrite32(np->csr6 & ~0x2002, ioaddr + NetworkConfig);
+	/* wait until they have really stopped */
+	for (;;) {
+		int csr5 = ioread32(ioaddr + IntrStatus);
+		int t;
+
+		t = (csr5 >> 17) & 0x07;
+		if (t==0||t==1) {
+			/* rx stopped */
+			t = (csr5 >> 20) & 0x07;
+			if (t==0||t==1)
+				break;
+		}
+
+		limit--;
+		if(!limit) {
+			dev_info(&dev->dev,
+				 "couldn't stop rxtx, IntrStatus %xh\n", csr5);
+			break;
+		}
+		udelay(1);
+	}
+	np->csr6 = new;
+	/* and restart them with the new configuration */
+	iowrite32(np->csr6, ioaddr + NetworkConfig);
+	if (new & 0x200)
+		np->mii_if.full_duplex = 1;
+}
+
+static void netdev_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	if (debug > 2)
+		netdev_dbg(dev, "Media selection timer tick, status %08x config %08x\n",
+			   ioread32(ioaddr + IntrStatus),
+			   ioread32(ioaddr + NetworkConfig));
+	spin_lock_irq(&np->lock);
+	update_csr6(dev, update_link(dev));
+	spin_unlock_irq(&np->lock);
+	np->timer.expires = jiffies + 10*HZ;
+	add_timer(&np->timer);
+}
+
+static void init_rxtx_rings(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	np->rx_head_desc = &np->rx_ring[0];
+	np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE];
+
+	/* Initial all Rx descriptors. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		np->rx_ring[i].length = np->rx_buf_sz;
+		np->rx_ring[i].status = 0;
+		np->rx_skbuff[i] = NULL;
+	}
+	/* Mark the last entry as wrapping the ring. */
+	np->rx_ring[i-1].length |= DescEndRing;
+
+	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
+		np->rx_skbuff[i] = skb;
+		if (skb == NULL)
+			break;
+		np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
+					np->rx_buf_sz,PCI_DMA_FROMDEVICE);
+
+		np->rx_ring[i].buffer1 = np->rx_addr[i];
+		np->rx_ring[i].status = DescOwned;
+	}
+
+	np->cur_rx = 0;
+	np->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+	/* Initialize the Tx descriptors */
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		np->tx_skbuff[i] = NULL;
+		np->tx_ring[i].status = 0;
+	}
+	np->tx_full = 0;
+	np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0;
+
+	iowrite32(np->ring_dma_addr, np->base_addr + RxRingPtr);
+	iowrite32(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE,
+		np->base_addr + TxRingPtr);
+
+}
+
+static void free_rxtx_rings(struct netdev_private* np)
+{
+	int i;
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		np->rx_ring[i].status = 0;
+		if (np->rx_skbuff[i]) {
+			pci_unmap_single(np->pci_dev,
+						np->rx_addr[i],
+						np->rx_skbuff[i]->len,
+						PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(np->rx_skbuff[i]);
+		}
+		np->rx_skbuff[i] = NULL;
+	}
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		if (np->tx_skbuff[i]) {
+			pci_unmap_single(np->pci_dev,
+						np->tx_addr[i],
+						np->tx_skbuff[i]->len,
+						PCI_DMA_TODEVICE);
+			dev_kfree_skb(np->tx_skbuff[i]);
+		}
+		np->tx_skbuff[i] = NULL;
+	}
+}
+
+static void init_registers(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	int i;
+
+	for (i = 0; i < 6; i++)
+		iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
+
+	/* Initialize other registers. */
+#ifdef __BIG_ENDIAN
+	i = (1<<20);	/* Big-endian descriptors */
+#else
+	i = 0;
+#endif
+	i |= (0x04<<2);		/* skip length 4 u32 */
+	i |= 0x02;		/* give Rx priority */
+
+	/* Configure the PCI bus bursts and FIFO thresholds.
+	   486: Set 8 longword cache alignment, 8 longword burst.
+	   586: Set 16 longword cache alignment, no burst limit.
+	   Cache alignment bits 15:14	     Burst length 13:8
+		0000	<not allowed> 		0000 align to cache	0800 8 longwords
+		4000	8  longwords		0100 1 longword		1000 16 longwords
+		8000	16 longwords		0200 2 longwords	2000 32 longwords
+		C000	32  longwords		0400 4 longwords */
+
+#if defined (__i386__) && !defined(MODULE)
+	/* When not a module we can work around broken '486 PCI boards. */
+	if (boot_cpu_data.x86 <= 4) {
+		i |= 0x4800;
+		dev_info(&dev->dev,
+			 "This is a 386/486 PCI system, setting cache alignment to 8 longwords\n");
+	} else {
+		i |= 0xE000;
+	}
+#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
+	i |= 0xE000;
+#elif defined(CONFIG_SPARC) || defined (CONFIG_PARISC)
+	i |= 0x4800;
+#else
+#warning Processor architecture undefined
+	i |= 0x4800;
+#endif
+	iowrite32(i, ioaddr + PCIBusCfg);
+
+	np->csr6 = 0;
+	/* 128 byte Tx threshold;
+		Transmit on; Receive on; */
+	update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev));
+
+	/* Clear and Enable interrupts by setting the interrupt mask. */
+	iowrite32(0x1A0F5, ioaddr + IntrStatus);
+	iowrite32(0x1A0F5, ioaddr + IntrEnable);
+
+	iowrite32(0, ioaddr + RxStartDemand);
+}
+
+static void tx_timeout(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	dev_warn(&dev->dev, "Transmit timed out, status %08x, resetting...\n",
+		 ioread32(ioaddr + IntrStatus));
+
+	{
+		int i;
+		printk(KERN_DEBUG "  Rx ring %p: ", np->rx_ring);
+		for (i = 0; i < RX_RING_SIZE; i++)
+			printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status);
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG "  Tx ring %p: ", np->tx_ring);
+		for (i = 0; i < TX_RING_SIZE; i++)
+			printk(KERN_CONT " %08x", np->tx_ring[i].status);
+		printk(KERN_CONT "\n");
+	}
+	printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n",
+	       np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes);
+	printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C));
+
+	disable_irq(dev->irq);
+	spin_lock_irq(&np->lock);
+	/*
+	 * Under high load dirty_tx and the internal tx descriptor pointer
+	 * come out of sync, thus perform a software reset and reinitialize
+	 * everything.
+	 */
+
+	iowrite32(1, np->base_addr+PCIBusCfg);
+	udelay(1);
+
+	free_rxtx_rings(np);
+	init_rxtx_rings(dev);
+	init_registers(dev);
+	spin_unlock_irq(&np->lock);
+	enable_irq(dev->irq);
+
+	netif_wake_queue(dev);
+	dev->trans_start = jiffies; /* prevent tx timeout */
+	np->stats.tx_errors++;
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static int alloc_ringdesc(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+
+	np->rx_ring = pci_alloc_consistent(np->pci_dev,
+			sizeof(struct w840_rx_desc)*RX_RING_SIZE +
+			sizeof(struct w840_tx_desc)*TX_RING_SIZE,
+			&np->ring_dma_addr);
+	if(!np->rx_ring)
+		return -ENOMEM;
+	init_rxtx_rings(dev);
+	return 0;
+}
+
+static void free_ringdesc(struct netdev_private *np)
+{
+	pci_free_consistent(np->pci_dev,
+			sizeof(struct w840_rx_desc)*RX_RING_SIZE +
+			sizeof(struct w840_tx_desc)*TX_RING_SIZE,
+			np->rx_ring, np->ring_dma_addr);
+
+}
+
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	unsigned entry;
+
+	/* Caution: the write order is important here, set the field
+	   with the "ownership" bits last. */
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = np->cur_tx % TX_RING_SIZE;
+
+	np->tx_addr[entry] = pci_map_single(np->pci_dev,
+				skb->data,skb->len, PCI_DMA_TODEVICE);
+	np->tx_skbuff[entry] = skb;
+
+	np->tx_ring[entry].buffer1 = np->tx_addr[entry];
+	if (skb->len < TX_BUFLIMIT) {
+		np->tx_ring[entry].length = DescWholePkt | skb->len;
+	} else {
+		int len = skb->len - TX_BUFLIMIT;
+
+		np->tx_ring[entry].buffer2 = np->tx_addr[entry]+TX_BUFLIMIT;
+		np->tx_ring[entry].length = DescWholePkt | (len << 11) | TX_BUFLIMIT;
+	}
+	if(entry == TX_RING_SIZE-1)
+		np->tx_ring[entry].length |= DescEndRing;
+
+	/* Now acquire the irq spinlock.
+	 * The difficult race is the ordering between
+	 * increasing np->cur_tx and setting DescOwned:
+	 * - if np->cur_tx is increased first the interrupt
+	 *   handler could consider the packet as transmitted
+	 *   since DescOwned is cleared.
+	 * - If DescOwned is set first the NIC could report the
+	 *   packet as sent, but the interrupt handler would ignore it
+	 *   since the np->cur_tx was not yet increased.
+	 */
+	spin_lock_irq(&np->lock);
+	np->cur_tx++;
+
+	wmb(); /* flush length, buffer1, buffer2 */
+	np->tx_ring[entry].status = DescOwned;
+	wmb(); /* flush status and kick the hardware */
+	iowrite32(0, np->base_addr + TxStartDemand);
+	np->tx_q_bytes += skb->len;
+	/* Work around horrible bug in the chip by marking the queue as full
+	   when we do not have FIFO room for a maximum sized packet. */
+	if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN ||
+		((np->drv_flags & HasBrokenTx) && np->tx_q_bytes > TX_BUG_FIFO_LIMIT)) {
+		netif_stop_queue(dev);
+		wmb();
+		np->tx_full = 1;
+	}
+	spin_unlock_irq(&np->lock);
+
+	if (debug > 4) {
+		netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
+			   np->cur_tx, entry);
+	}
+	return NETDEV_TX_OK;
+}
+
+static void netdev_tx_done(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
+		int entry = np->dirty_tx % TX_RING_SIZE;
+		int tx_status = np->tx_ring[entry].status;
+
+		if (tx_status < 0)
+			break;
+		if (tx_status & 0x8000) { 	/* There was an error, log it. */
+#ifndef final_version
+			if (debug > 1)
+				netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+					   tx_status);
+#endif
+			np->stats.tx_errors++;
+			if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
+			if (tx_status & 0x0C80) np->stats.tx_carrier_errors++;
+			if (tx_status & 0x0200) np->stats.tx_window_errors++;
+			if (tx_status & 0x0002) np->stats.tx_fifo_errors++;
+			if ((tx_status & 0x0080) && np->mii_if.full_duplex == 0)
+				np->stats.tx_heartbeat_errors++;
+		} else {
+#ifndef final_version
+			if (debug > 3)
+				netdev_dbg(dev, "Transmit slot %d ok, Tx status %08x\n",
+					   entry, tx_status);
+#endif
+			np->stats.tx_bytes += np->tx_skbuff[entry]->len;
+			np->stats.collisions += (tx_status >> 3) & 15;
+			np->stats.tx_packets++;
+		}
+		/* Free the original skb. */
+		pci_unmap_single(np->pci_dev,np->tx_addr[entry],
+					np->tx_skbuff[entry]->len,
+					PCI_DMA_TODEVICE);
+		np->tx_q_bytes -= np->tx_skbuff[entry]->len;
+		dev_kfree_skb_irq(np->tx_skbuff[entry]);
+		np->tx_skbuff[entry] = NULL;
+	}
+	if (np->tx_full &&
+		np->cur_tx - np->dirty_tx < TX_QUEUE_LEN_RESTART &&
+		np->tx_q_bytes < TX_BUG_FIFO_LIMIT) {
+		/* The ring is no longer full, clear tbusy. */
+		np->tx_full = 0;
+		wmb();
+		netif_wake_queue(dev);
+	}
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static irqreturn_t intr_handler(int irq, void *dev_instance)
+{
+	struct net_device *dev = (struct net_device *)dev_instance;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	int work_limit = max_interrupt_work;
+	int handled = 0;
+
+	if (!netif_device_present(dev))
+		return IRQ_NONE;
+	do {
+		u32 intr_status = ioread32(ioaddr + IntrStatus);
+
+		/* Acknowledge all of the current interrupt sources ASAP. */
+		iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus);
+
+		if (debug > 4)
+			netdev_dbg(dev, "Interrupt, status %04x\n", intr_status);
+
+		if ((intr_status & (NormalIntr|AbnormalIntr)) == 0)
+			break;
+
+		handled = 1;
+
+		if (intr_status & (RxIntr | RxNoBuf))
+			netdev_rx(dev);
+		if (intr_status & RxNoBuf)
+			iowrite32(0, ioaddr + RxStartDemand);
+
+		if (intr_status & (TxNoBuf | TxIntr) &&
+			np->cur_tx != np->dirty_tx) {
+			spin_lock(&np->lock);
+			netdev_tx_done(dev);
+			spin_unlock(&np->lock);
+		}
+
+		/* Abnormal error summary/uncommon events handlers. */
+		if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SystemError |
+						   TimerInt | TxDied))
+			netdev_error(dev, intr_status);
+
+		if (--work_limit < 0) {
+			dev_warn(&dev->dev,
+				 "Too much work at interrupt, status=0x%04x\n",
+				 intr_status);
+			/* Set the timer to re-enable the other interrupts after
+			   10*82usec ticks. */
+			spin_lock(&np->lock);
+			if (netif_device_present(dev)) {
+				iowrite32(AbnormalIntr | TimerInt, ioaddr + IntrEnable);
+				iowrite32(10, ioaddr + GPTimer);
+			}
+			spin_unlock(&np->lock);
+			break;
+		}
+	} while (1);
+
+	if (debug > 3)
+		netdev_dbg(dev, "exiting interrupt, status=%#4.4x\n",
+			   ioread32(ioaddr + IntrStatus));
+	return IRQ_RETVAL(handled);
+}
+
+/* This routine is logically part of the interrupt handler, but separated
+   for clarity and better register allocation. */
+static int netdev_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int entry = np->cur_rx % RX_RING_SIZE;
+	int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
+
+	if (debug > 4) {
+		netdev_dbg(dev, " In netdev_rx(), entry %d status %04x\n",
+			   entry, np->rx_ring[entry].status);
+	}
+
+	/* If EOP is set on the next entry, it's a new packet. Send it up. */
+	while (--work_limit >= 0) {
+		struct w840_rx_desc *desc = np->rx_head_desc;
+		s32 status = desc->status;
+
+		if (debug > 4)
+			netdev_dbg(dev, "  netdev_rx() status was %08x\n",
+				   status);
+		if (status < 0)
+			break;
+		if ((status & 0x38008300) != 0x0300) {
+			if ((status & 0x38000300) != 0x0300) {
+				/* Ingore earlier buffers. */
+				if ((status & 0xffff) != 0x7fff) {
+					dev_warn(&dev->dev,
+						 "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n",
+						 np->cur_rx, status);
+					np->stats.rx_length_errors++;
+				}
+			} else if (status & 0x8000) {
+				/* There was a fatal error. */
+				if (debug > 2)
+					netdev_dbg(dev, "Receive error, Rx status %08x\n",
+						   status);
+				np->stats.rx_errors++; /* end of a packet.*/
+				if (status & 0x0890) np->stats.rx_length_errors++;
+				if (status & 0x004C) np->stats.rx_frame_errors++;
+				if (status & 0x0002) np->stats.rx_crc_errors++;
+			}
+		} else {
+			struct sk_buff *skb;
+			/* Omit the four octet CRC from the length. */
+			int pkt_len = ((status >> 16) & 0x7ff) - 4;
+
+#ifndef final_version
+			if (debug > 4)
+				netdev_dbg(dev, "  netdev_rx() normal Rx pkt length %d status %x\n",
+					   pkt_len, status);
+#endif
+			/* Check if the packet is long enough to accept without copying
+			   to a minimally-sized skbuff. */
+			if (pkt_len < rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+				skb_reserve(skb, 2);	/* 16 byte align the IP header */
+				pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry],
+							    np->rx_skbuff[entry]->len,
+							    PCI_DMA_FROMDEVICE);
+				skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
+				skb_put(skb, pkt_len);
+				pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry],
+							       np->rx_skbuff[entry]->len,
+							       PCI_DMA_FROMDEVICE);
+			} else {
+				pci_unmap_single(np->pci_dev,np->rx_addr[entry],
+							np->rx_skbuff[entry]->len,
+							PCI_DMA_FROMDEVICE);
+				skb_put(skb = np->rx_skbuff[entry], pkt_len);
+				np->rx_skbuff[entry] = NULL;
+			}
+#ifndef final_version				/* Remove after testing. */
+			/* You will want this info for the initial debug. */
+			if (debug > 5)
+				netdev_dbg(dev, "  Rx data %pM %pM %02x%02x %pI4\n",
+					   &skb->data[0], &skb->data[6],
+					   skb->data[12], skb->data[13],
+					   &skb->data[14]);
+#endif
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+			np->stats.rx_packets++;
+			np->stats.rx_bytes += pkt_len;
+		}
+		entry = (++np->cur_rx) % RX_RING_SIZE;
+		np->rx_head_desc = &np->rx_ring[entry];
+	}
+
+	/* Refill the Rx ring buffers. */
+	for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) {
+		struct sk_buff *skb;
+		entry = np->dirty_rx % RX_RING_SIZE;
+		if (np->rx_skbuff[entry] == NULL) {
+			skb = dev_alloc_skb(np->rx_buf_sz);
+			np->rx_skbuff[entry] = skb;
+			if (skb == NULL)
+				break;			/* Better luck next round. */
+			np->rx_addr[entry] = pci_map_single(np->pci_dev,
+							skb->data,
+							np->rx_buf_sz, PCI_DMA_FROMDEVICE);
+			np->rx_ring[entry].buffer1 = np->rx_addr[entry];
+		}
+		wmb();
+		np->rx_ring[entry].status = DescOwned;
+	}
+
+	return 0;
+}
+
+static void netdev_error(struct net_device *dev, int intr_status)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	if (debug > 2)
+		netdev_dbg(dev, "Abnormal event, %08x\n", intr_status);
+	if (intr_status == 0xffffffff)
+		return;
+	spin_lock(&np->lock);
+	if (intr_status & TxFIFOUnderflow) {
+		int new;
+		/* Bump up the Tx threshold */
+#if 0
+		/* This causes lots of dropped packets,
+		 * and under high load even tx_timeouts
+		 */
+		new = np->csr6 + 0x4000;
+#else
+		new = (np->csr6 >> 14)&0x7f;
+		if (new < 64)
+			new *= 2;
+		 else
+		 	new = 127; /* load full packet before starting */
+		new = (np->csr6 & ~(0x7F << 14)) | (new<<14);
+#endif
+		netdev_dbg(dev, "Tx underflow, new csr6 %08x\n", new);
+		update_csr6(dev, new);
+	}
+	if (intr_status & RxDied) {		/* Missed a Rx frame. */
+		np->stats.rx_errors++;
+	}
+	if (intr_status & TimerInt) {
+		/* Re-enable other interrupts. */
+		if (netif_device_present(dev))
+			iowrite32(0x1A0F5, ioaddr + IntrEnable);
+	}
+	np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
+	iowrite32(0, ioaddr + RxStartDemand);
+	spin_unlock(&np->lock);
+}
+
+static struct net_device_stats *get_stats(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	/* The chip only need report frame silently dropped. */
+	spin_lock_irq(&np->lock);
+	if (netif_running(dev) && netif_device_present(dev))
+		np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
+	spin_unlock_irq(&np->lock);
+
+	return &np->stats;
+}
+
+
+static u32 __set_rx_mode(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	u32 mc_filter[2];			/* Multicast hash filter */
+	u32 rx_mode;
+
+	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys
+			| AcceptMyPhys;
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to match, or accept all multicasts. */
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+	} else {
+		struct netdev_hw_addr *ha;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		netdev_for_each_mc_addr(ha, dev) {
+			int filbit;
+
+			filbit = (ether_crc(ETH_ALEN, ha->addr) >> 26) ^ 0x3F;
+			filbit &= 0x3f;
+			mc_filter[filbit >> 5] |= 1 << (filbit & 31);
+		}
+		rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+	}
+	iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
+	iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
+	return rx_mode;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	u32 rx_mode = __set_rx_mode(dev);
+	spin_lock_irq(&np->lock);
+	update_csr6(dev, (np->csr6 & ~0x00F8) | rx_mode);
+	spin_unlock_irq(&np->lock);
+}
+
+static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	strcpy (info->driver, DRV_NAME);
+	strcpy (info->version, DRV_VERSION);
+	strcpy (info->bus_info, pci_name(np->pci_dev));
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int rc;
+
+	spin_lock_irq(&np->lock);
+	rc = mii_ethtool_gset(&np->mii_if, cmd);
+	spin_unlock_irq(&np->lock);
+
+	return rc;
+}
+
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int rc;
+
+	spin_lock_irq(&np->lock);
+	rc = mii_ethtool_sset(&np->mii_if, cmd);
+	spin_unlock_irq(&np->lock);
+
+	return rc;
+}
+
+static int netdev_nway_reset(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	return mii_nway_restart(&np->mii_if);
+}
+
+static u32 netdev_get_link(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	return mii_link_ok(&np->mii_if);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+	return debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+	debug = value;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_settings		= netdev_get_settings,
+	.set_settings		= netdev_set_settings,
+	.nway_reset		= netdev_nway_reset,
+	.get_link		= netdev_get_link,
+	.get_msglevel		= netdev_get_msglevel,
+	.set_msglevel		= netdev_set_msglevel,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct mii_ioctl_data *data = if_mii(rq);
+	struct netdev_private *np = netdev_priv(dev);
+
+	switch(cmd) {
+	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
+		data->phy_id = ((struct netdev_private *)netdev_priv(dev))->phys[0] & 0x1f;
+		/* Fall Through */
+
+	case SIOCGMIIREG:		/* Read MII PHY register. */
+		spin_lock_irq(&np->lock);
+		data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
+		spin_unlock_irq(&np->lock);
+		return 0;
+
+	case SIOCSMIIREG:		/* Write MII PHY register. */
+		spin_lock_irq(&np->lock);
+		mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+		spin_unlock_irq(&np->lock);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int netdev_close(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	netif_stop_queue(dev);
+
+	if (debug > 1) {
+		netdev_dbg(dev, "Shutting down ethercard, status was %08x Config %08x\n",
+			   ioread32(ioaddr + IntrStatus),
+			   ioread32(ioaddr + NetworkConfig));
+		netdev_dbg(dev, "Queue pointers were Tx %d / %d,  Rx %d / %d\n",
+			   np->cur_tx, np->dirty_tx,
+			   np->cur_rx, np->dirty_rx);
+	}
+
+ 	/* Stop the chip's Tx and Rx processes. */
+	spin_lock_irq(&np->lock);
+	netif_device_detach(dev);
+	update_csr6(dev, 0);
+	iowrite32(0x0000, ioaddr + IntrEnable);
+	spin_unlock_irq(&np->lock);
+
+	free_irq(dev->irq, dev);
+	wmb();
+	netif_device_attach(dev);
+
+	if (ioread32(ioaddr + NetworkConfig) != 0xffffffff)
+		np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
+
+#ifdef __i386__
+	if (debug > 2) {
+		int i;
+
+		printk(KERN_DEBUG"  Tx ring at %p:\n", np->tx_ring);
+		for (i = 0; i < TX_RING_SIZE; i++)
+			printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
+			       i, np->tx_ring[i].length,
+			       np->tx_ring[i].status, np->tx_ring[i].buffer1);
+		printk(KERN_DEBUG "  Rx ring %p:\n", np->rx_ring);
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
+			       i, np->rx_ring[i].length,
+			       np->rx_ring[i].status, np->rx_ring[i].buffer1);
+		}
+	}
+#endif /* __i386__ debugging only */
+
+	del_timer_sync(&np->timer);
+
+	free_rxtx_rings(np);
+	free_ringdesc(np);
+
+	return 0;
+}
+
+static void __devexit w840_remove1 (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (dev) {
+		struct netdev_private *np = netdev_priv(dev);
+		unregister_netdev(dev);
+		pci_release_regions(pdev);
+		pci_iounmap(pdev, np->base_addr);
+		free_netdev(dev);
+	}
+
+	pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+
+/*
+ * suspend/resume synchronization:
+ * - open, close, do_ioctl:
+ * 	rtnl_lock, & netif_device_detach after the rtnl_unlock.
+ * - get_stats:
+ * 	spin_lock_irq(np->lock), doesn't touch hw if not present
+ * - start_xmit:
+ * 	synchronize_irq + netif_tx_disable;
+ * - tx_timeout:
+ * 	netif_device_detach + netif_tx_disable;
+ * - set_multicast_list
+ * 	netif_device_detach + netif_tx_disable;
+ * - interrupt handler
+ * 	doesn't touch hw if not present, synchronize_irq waits for
+ * 	running instances of the interrupt handler.
+ *
+ * Disabling hw requires clearing csr6 & IntrEnable.
+ * update_csr6 & all function that write IntrEnable check netif_device_present
+ * before settings any bits.
+ *
+ * Detach must occur under spin_unlock_irq(), interrupts from a detached
+ * device would cause an irq storm.
+ */
+static int w840_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	rtnl_lock();
+	if (netif_running (dev)) {
+		del_timer_sync(&np->timer);
+
+		spin_lock_irq(&np->lock);
+		netif_device_detach(dev);
+		update_csr6(dev, 0);
+		iowrite32(0, ioaddr + IntrEnable);
+		spin_unlock_irq(&np->lock);
+
+		synchronize_irq(dev->irq);
+		netif_tx_disable(dev);
+
+		np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
+
+		/* no more hardware accesses behind this line. */
+
+		BUG_ON(np->csr6 || ioread32(ioaddr + IntrEnable));
+
+		/* pci_power_off(pdev, -1); */
+
+		free_rxtx_rings(np);
+	} else {
+		netif_device_detach(dev);
+	}
+	rtnl_unlock();
+	return 0;
+}
+
+static int w840_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct netdev_private *np = netdev_priv(dev);
+	int retval = 0;
+
+	rtnl_lock();
+	if (netif_device_present(dev))
+		goto out; /* device not suspended */
+	if (netif_running(dev)) {
+		if ((retval = pci_enable_device(pdev))) {
+			dev_err(&dev->dev,
+				"pci_enable_device failed in resume\n");
+			goto out;
+		}
+		spin_lock_irq(&np->lock);
+		iowrite32(1, np->base_addr+PCIBusCfg);
+		ioread32(np->base_addr+PCIBusCfg);
+		udelay(1);
+		netif_device_attach(dev);
+		init_rxtx_rings(dev);
+		init_registers(dev);
+		spin_unlock_irq(&np->lock);
+
+		netif_wake_queue(dev);
+
+		mod_timer(&np->timer, jiffies + 1*HZ);
+	} else {
+		netif_device_attach(dev);
+	}
+out:
+	rtnl_unlock();
+	return retval;
+}
+#endif
+
+static struct pci_driver w840_driver = {
+	.name		= DRV_NAME,
+	.id_table	= w840_pci_tbl,
+	.probe		= w840_probe1,
+	.remove		= __devexit_p(w840_remove1),
+#ifdef CONFIG_PM
+	.suspend	= w840_suspend,
+	.resume		= w840_resume,
+#endif
+};
+
+static int __init w840_init(void)
+{
+	printk(version);
+	return pci_register_driver(&w840_driver);
+}
+
+static void __exit w840_exit(void)
+{
+	pci_unregister_driver(&w840_driver);
+}
+
+module_init(w840_init);
+module_exit(w840_exit);