Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 3463 insertions, 0 deletions

diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
new file mode 100644
index 000000000000..a6aa56598f27
--- /dev/null
+++ b/drivers/net/defxx.c
@@ -0,0 +1,3463 @@
+/*
+ * File Name:
+ *   defxx.c
+ *
+ * Copyright Information:
+ *   Copyright Digital Equipment Corporation 1996.
+ *
+ *   This software may be used and distributed according to the terms of
+ *   the GNU General Public License, incorporated herein by reference.
+ *
+ * Abstract:
+ *   A Linux device driver supporting the Digital Equipment Corporation
+ *   FDDI EISA and PCI controller families.  Supported adapters include:
+ *
+ *		DEC FDDIcontroller/EISA (DEFEA)
+ *		DEC FDDIcontroller/PCI  (DEFPA)
+ *
+ * The original author:
+ *   LVS	Lawrence V. Stefani <lstefani@yahoo.com>
+ *
+ * Maintainers:
+ *   macro	Maciej W. Rozycki <macro@linux-mips.org>
+ *
+ * Credits:
+ *   I'd like to thank Patricia Cross for helping me get started with
+ *   Linux, David Davies for a lot of help upgrading and configuring
+ *   my development system and for answering many OS and driver
+ *   development questions, and Alan Cox for recommendations and
+ *   integration help on getting FDDI support into Linux.  LVS
+ *
+ * Driver Architecture:
+ *   The driver architecture is largely based on previous driver work
+ *   for other operating systems.  The upper edge interface and
+ *   functions were largely taken from existing Linux device drivers
+ *   such as David Davies' DE4X5.C driver and Donald Becker's TULIP.C
+ *   driver.
+ *
+ *   Adapter Probe -
+ *		The driver scans for supported EISA adapters by reading the
+ *		SLOT ID register for each EISA slot and making a match
+ *		against the expected value.
+ *
+ *   Bus-Specific Initialization -
+ *		This driver currently supports both EISA and PCI controller
+ *		families.  While the custom DMA chip and FDDI logic is similar
+ *		or identical, the bus logic is very different.  After
+ *		initialization, the	only bus-specific differences is in how the
+ *		driver enables and disables interrupts.  Other than that, the
+ *		run-time critical code behaves the same on both families.
+ *		It's important to note that both adapter families are configured
+ *		to I/O map, rather than memory map, the adapter registers.
+ *
+ *   Driver Open/Close -
+ *		In the driver open routine, the driver ISR (interrupt service
+ *		routine) is registered and the adapter is brought to an
+ *		operational state.  In the driver close routine, the opposite
+ *		occurs; the driver ISR is deregistered and the adapter is
+ *		brought to a safe, but closed state.  Users may use consecutive
+ *		commands to bring the adapter up and down as in the following
+ *		example:
+ *					ifconfig fddi0 up
+ *					ifconfig fddi0 down
+ *					ifconfig fddi0 up
+ *
+ *   Driver Shutdown -
+ *		Apparently, there is no shutdown or halt routine support under
+ *		Linux.  This routine would be called during "reboot" or
+ *		"shutdown" to allow the driver to place the adapter in a safe
+ *		state before a warm reboot occurs.  To be really safe, the user
+ *		should close the adapter before shutdown (eg. ifconfig fddi0 down)
+ *		to ensure that the adapter DMA engine is taken off-line.  However,
+ *		the current driver code anticipates this problem and always issues
+ *		a soft reset of the adapter	at the beginning of driver initialization.
+ *		A future driver enhancement in this area may occur in 2.1.X where
+ *		Alan indicated that a shutdown handler may be implemented.
+ *
+ *   Interrupt Service Routine -
+ *		The driver supports shared interrupts, so the ISR is registered for
+ *		each board with the appropriate flag and the pointer to that board's
+ *		device structure.  This provides the context during interrupt
+ *		processing to support shared interrupts and multiple boards.
+ *
+ *		Interrupt enabling/disabling can occur at many levels.  At the host
+ *		end, you can disable system interrupts, or disable interrupts at the
+ *		PIC (on Intel systems).  Across the bus, both EISA and PCI adapters
+ *		have a bus-logic chip interrupt enable/disable as well as a DMA
+ *		controller interrupt enable/disable.
+ *
+ *		The driver currently enables and disables adapter interrupts at the
+ *		bus-logic chip and assumes that Linux will take care of clearing or
+ *		acknowledging any host-based interrupt chips.
+ *
+ *   Control Functions -
+ *		Control functions are those used to support functions such as adding
+ *		or deleting multicast addresses, enabling or disabling packet
+ *		reception filters, or other custom/proprietary commands.  Presently,
+ *		the driver supports the "get statistics", "set multicast list", and
+ *		"set mac address" functions defined by Linux.  A list of possible
+ *		enhancements include:
+ *
+ *				- Custom ioctl interface for executing port interface commands
+ *				- Custom ioctl interface for adding unicast addresses to
+ *				  adapter CAM (to support bridge functions).
+ *				- Custom ioctl interface for supporting firmware upgrades.
+ *
+ *   Hardware (port interface) Support Routines -
+ *		The driver function names that start with "dfx_hw_" represent
+ *		low-level port interface routines that are called frequently.  They
+ *		include issuing a DMA or port control command to the adapter,
+ *		resetting the adapter, or reading the adapter state.  Since the
+ *		driver initialization and run-time code must make calls into the
+ *		port interface, these routines were written to be as generic and
+ *		usable as possible.
+ *
+ *   Receive Path -
+ *		The adapter DMA engine supports a 256 entry receive descriptor block
+ *		of which up to 255 entries can be used at any given time.  The
+ *		architecture is a standard producer, consumer, completion model in
+ *		which the driver "produces" receive buffers to the adapter, the
+ *		adapter "consumes" the receive buffers by DMAing incoming packet data,
+ *		and the driver "completes" the receive buffers by servicing the
+ *		incoming packet, then "produces" a new buffer and starts the cycle
+ *		again.  Receive buffers can be fragmented in up to 16 fragments
+ *		(descriptor	entries).  For simplicity, this driver posts
+ *		single-fragment receive buffers of 4608 bytes, then allocates a
+ *		sk_buff, copies the data, then reposts the buffer.  To reduce CPU
+ *		utilization, a better approach would be to pass up the receive
+ *		buffer (no extra copy) then allocate and post a replacement buffer.
+ *		This is a performance enhancement that should be looked into at
+ *		some point.
+ *
+ *   Transmit Path -
+ *		Like the receive path, the adapter DMA engine supports a 256 entry
+ *		transmit descriptor block of which up to 255 entries can be used at
+ *		any	given time.  Transmit buffers can be fragmented	in up to 255
+ *		fragments (descriptor entries).  This driver always posts one
+ *		fragment per transmit packet request.
+ *
+ *		The fragment contains the entire packet from FC to end of data.
+ *		Before posting the buffer to the adapter, the driver sets a three-byte
+ *		packet request header (PRH) which is required by the Motorola MAC chip
+ *		used on the adapters.  The PRH tells the MAC the type of token to
+ *		receive/send, whether or not to generate and append the CRC, whether
+ *		synchronous or asynchronous framing is used, etc.  Since the PRH
+ *		definition is not necessarily consistent across all FDDI chipsets,
+ *		the driver, rather than the common FDDI packet handler routines,
+ *		sets these bytes.
+ *
+ *		To reduce the amount of descriptor fetches needed per transmit request,
+ *		the driver takes advantage of the fact that there are at least three
+ *		bytes available before the skb->data field on the outgoing transmit
+ *		request.  This is guaranteed by having fddi_setup() in net_init.c set
+ *		dev->hard_header_len to 24 bytes.  21 bytes accounts for the largest
+ *		header in an 802.2 SNAP frame.  The other 3 bytes are the extra "pad"
+ *		bytes which we'll use to store the PRH.
+ *
+ *		There's a subtle advantage to adding these pad bytes to the
+ *		hard_header_len, it ensures that the data portion of the packet for
+ *		an 802.2 SNAP frame is longword aligned.  Other FDDI driver
+ *		implementations may not need the extra padding and can start copying
+ *		or DMAing directly from the FC byte which starts at skb->data.  Should
+ *		another driver implementation need ADDITIONAL padding, the net_init.c
+ *		module should be updated and dev->hard_header_len should be increased.
+ *		NOTE: To maintain the alignment on the data portion of the packet,
+ *		dev->hard_header_len should always be evenly divisible by 4 and at
+ *		least 24 bytes in size.
+ *
+ * Modification History:
+ *		Date		Name	Description
+ *		16-Aug-96	LVS		Created.
+ *		20-Aug-96	LVS		Updated dfx_probe so that version information
+ *							string is only displayed if 1 or more cards are
+ *							found.  Changed dfx_rcv_queue_process to copy
+ *							3 NULL bytes before FC to ensure that data is
+ *							longword aligned in receive buffer.
+ *		09-Sep-96	LVS		Updated dfx_ctl_set_multicast_list to enable
+ *							LLC group promiscuous mode if multicast list
+ *							is too large.  LLC individual/group promiscuous
+ *							mode is now disabled if IFF_PROMISC flag not set.
+ *							dfx_xmt_queue_pkt no longer checks for NULL skb
+ *							on Alan Cox recommendation.  Added node address
+ *							override support.
+ *		12-Sep-96	LVS		Reset current address to factory address during
+ *							device open.  Updated transmit path to post a
+ *							single fragment which includes PRH->end of data.
+ *		Mar 2000	AC		Did various cleanups for 2.3.x
+ *		Jun 2000	jgarzik		PCI and resource alloc cleanups
+ *		Jul 2000	tjeerd		Much cleanup and some bug fixes
+ *		Sep 2000	tjeerd		Fix leak on unload, cosmetic code cleanup
+ *		Feb 2001			Skb allocation fixes
+ *		Feb 2001	davej		PCI enable cleanups.
+ *		04 Aug 2003	macro		Converted to the DMA API.
+ *		14 Aug 2004	macro		Fix device names reported.
+ */
+
+/* Include files */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#include "defxx.h"
+
+/* Version information string should be updated prior to each new release!  */
+#define DRV_NAME "defxx"
+#define DRV_VERSION "v1.07"
+#define DRV_RELDATE "2004/08/14"
+
+static char version[] __devinitdata =
+	DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
+	"  Lawrence V. Stefani and others\n";
+
+#define DYNAMIC_BUFFERS 1
+
+#define SKBUFF_RX_COPYBREAK 200
+/*
+ * NEW_SKB_SIZE = PI_RCV_DATA_K_SIZE_MAX+128 to allow 128 byte
+ * alignment for compatibility with old EISA boards.
+ */
+#define NEW_SKB_SIZE (PI_RCV_DATA_K_SIZE_MAX+128)
+
+/* Define module-wide (static) routines */
+
+static void		dfx_bus_init(struct net_device *dev);
+static void		dfx_bus_config_check(DFX_board_t *bp);
+
+static int		dfx_driver_init(struct net_device *dev, const char *print_name);
+static int		dfx_adap_init(DFX_board_t *bp, int get_buffers);
+
+static int		dfx_open(struct net_device *dev);
+static int		dfx_close(struct net_device *dev);
+
+static void		dfx_int_pr_halt_id(DFX_board_t *bp);
+static void		dfx_int_type_0_process(DFX_board_t *bp);
+static void		dfx_int_common(struct net_device *dev);
+static void		dfx_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static struct		net_device_stats *dfx_ctl_get_stats(struct net_device *dev);
+static void		dfx_ctl_set_multicast_list(struct net_device *dev);
+static int		dfx_ctl_set_mac_address(struct net_device *dev, void *addr);
+static int		dfx_ctl_update_cam(DFX_board_t *bp);
+static int		dfx_ctl_update_filters(DFX_board_t *bp);
+
+static int		dfx_hw_dma_cmd_req(DFX_board_t *bp);
+static int		dfx_hw_port_ctrl_req(DFX_board_t *bp, PI_UINT32	command, PI_UINT32 data_a, PI_UINT32 data_b, PI_UINT32 *host_data);
+static void		dfx_hw_adap_reset(DFX_board_t *bp, PI_UINT32 type);
+static int		dfx_hw_adap_state_rd(DFX_board_t *bp);
+static int		dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type);
+
+static int		dfx_rcv_init(DFX_board_t *bp, int get_buffers);
+static void		dfx_rcv_queue_process(DFX_board_t *bp);
+static void		dfx_rcv_flush(DFX_board_t *bp);
+
+static int		dfx_xmt_queue_pkt(struct sk_buff *skb, struct net_device *dev);
+static int		dfx_xmt_done(DFX_board_t *bp);
+static void		dfx_xmt_flush(DFX_board_t *bp);
+
+/* Define module-wide (static) variables */
+
+static struct net_device *root_dfx_eisa_dev;
+
+
+/*
+ * =======================
+ * = dfx_port_write_byte =
+ * = dfx_port_read_byte	 =
+ * = dfx_port_write_long =
+ * = dfx_port_read_long  =
+ * =======================
+ *   
+ * Overview:
+ *   Routines for reading and writing values from/to adapter
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp     - pointer to board information
+ *   offset - register offset from base I/O address
+ *   data   - for dfx_port_write_byte and dfx_port_write_long, this
+ *			  is a value to write.
+ *			  for dfx_port_read_byte and dfx_port_read_byte, this
+ *			  is a pointer to store the read value.
+ *
+ * Functional Description:
+ *   These routines perform the correct operation to read or write
+ *   the adapter register.
+ *   
+ *   EISA port block base addresses are based on the slot number in which the
+ *   controller is installed.  For example, if the EISA controller is installed
+ *   in slot 4, the port block base address is 0x4000.  If the controller is
+ *   installed in slot 2, the port block base address is 0x2000, and so on.
+ *   This port block can be used to access PDQ, ESIC, and DEFEA on-board
+ *   registers using the register offsets defined in DEFXX.H.
+ *
+ *   PCI port block base addresses are assigned by the PCI BIOS or system
+ *	 firmware.  There is one 128 byte port block which can be accessed.  It
+ *   allows for I/O mapping of both PDQ and PFI registers using the register
+ *   offsets defined in DEFXX.H.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   bp->base_addr is a valid base I/O address for this adapter.
+ *   offset is a valid register offset for this adapter.
+ *
+ * Side Effects:
+ *   Rather than produce macros for these functions, these routines
+ *   are defined using "inline" to ensure that the compiler will
+ *   generate inline code and not waste a procedure call and return.
+ *   This provides all the benefits of macros, but with the
+ *   advantage of strict data type checking.
+ */
+
+static inline void dfx_port_write_byte(
+	DFX_board_t	*bp,
+	int			offset,
+	u8			data
+	)
+
+	{
+	u16 port = bp->base_addr + offset;
+
+	outb(data, port);
+	}
+
+static inline void dfx_port_read_byte(
+	DFX_board_t	*bp,
+	int			offset,
+	u8			*data
+	)
+
+	{
+	u16 port = bp->base_addr + offset;
+
+	*data = inb(port);
+	}
+
+static inline void dfx_port_write_long(
+	DFX_board_t	*bp,
+	int			offset,
+	u32			data
+	)
+
+	{
+	u16 port = bp->base_addr + offset;
+
+	outl(data, port);
+	}
+
+static inline void dfx_port_read_long(
+	DFX_board_t	*bp,
+	int			offset,
+	u32			*data
+	)
+
+	{
+	u16 port = bp->base_addr + offset;
+
+	*data = inl(port);
+	}
+
+
+/*
+ * =============
+ * = dfx_init_one_pci_or_eisa =
+ * =============
+ *   
+ * Overview:
+ *   Initializes a supported FDDI EISA or PCI controller
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   pdev - pointer to pci device information (NULL for EISA)
+ *   ioaddr - pointer to port (NULL for PCI)
+ *
+ * Functional Description:
+ *
+ * Return Codes:
+ *   0		 - This device (fddi0, fddi1, etc) configured successfully
+ *   -EBUSY      - Failed to get resources, or dfx_driver_init failed.
+ *
+ * Assumptions:
+ *   It compiles so it should work :-( (PCI cards do :-)
+ *
+ * Side Effects:
+ *   Device structures for FDDI adapters (fddi0, fddi1, etc) are
+ *   initialized and the board resources are read and stored in
+ *   the device structure.
+ */
+static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, long ioaddr)
+{
+	static int version_disp;
+	char *print_name = DRV_NAME;
+	struct net_device *dev;
+	DFX_board_t	  *bp;			/* board pointer */
+	int alloc_size;				/* total buffer size used */
+	int err;
+
+	if (!version_disp) {	/* display version info if adapter is found */
+		version_disp = 1;	/* set display flag to TRUE so that */
+		printk(version);	/* we only display this string ONCE */
+	}
+
+	if (pdev != NULL)
+		print_name = pci_name(pdev);
+
+	dev = alloc_fddidev(sizeof(*bp));
+	if (!dev) {
+		printk(KERN_ERR "%s: unable to allocate fddidev, aborting\n",
+		       print_name);
+		return -ENOMEM;
+	}
+
+	/* Enable PCI device. */
+	if (pdev != NULL) {
+		err = pci_enable_device (pdev);
+		if (err) goto err_out;
+		ioaddr = pci_resource_start (pdev, 1);
+	}
+
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	bp = dev->priv;
+
+	if (!request_region(ioaddr,
+			    pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN,
+			    print_name)) {
+		printk(KERN_ERR "%s: Cannot reserve I/O resource "
+		       "0x%x @ 0x%lx, aborting\n", print_name,
+		       pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN, ioaddr);
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	/* Initialize new device structure */
+
+	dev->base_addr			= ioaddr; /* save port (I/O) base address */
+
+	dev->get_stats			= dfx_ctl_get_stats;
+	dev->open			= dfx_open;
+	dev->stop			= dfx_close;
+	dev->hard_start_xmit		= dfx_xmt_queue_pkt;
+	dev->set_multicast_list		= dfx_ctl_set_multicast_list;
+	dev->set_mac_address		= dfx_ctl_set_mac_address;
+
+	if (pdev == NULL) {
+		/* EISA board */
+		bp->bus_type = DFX_BUS_TYPE_EISA;
+		bp->next = root_dfx_eisa_dev;
+		root_dfx_eisa_dev = dev;
+	} else {
+		/* PCI board */
+		bp->bus_type = DFX_BUS_TYPE_PCI;
+		bp->pci_dev = pdev;
+		pci_set_drvdata (pdev, dev);
+		pci_set_master (pdev);
+	}
+
+	if (dfx_driver_init(dev, print_name) != DFX_K_SUCCESS) {
+		err = -ENODEV;
+		goto err_out_region;
+	}
+
+	err = register_netdev(dev);
+	if (err)
+		goto err_out_kfree;
+
+	printk("%s: registered as %s\n", print_name, dev->name);
+	return 0;
+
+err_out_kfree:
+	alloc_size = sizeof(PI_DESCR_BLOCK) +
+		     PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+		     (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+		     sizeof(PI_CONSUMER_BLOCK) +
+		     (PI_ALIGN_K_DESC_BLK - 1);
+	if (bp->kmalloced)
+		pci_free_consistent(pdev, alloc_size,
+				    bp->kmalloced, bp->kmalloced_dma);
+err_out_region:
+	release_region(ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN);
+err_out:
+	free_netdev(dev);
+	return err;
+}
+
+static int __devinit dfx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	return dfx_init_one_pci_or_eisa(pdev, 0);
+}
+
+static int __init dfx_eisa_init(void)
+{
+	int rc = -ENODEV;
+	int i;			/* used in for loops */
+	u16 port;		/* temporary I/O (port) address */
+	u32 slot_id;		/* EISA hardware (slot) ID read from adapter */
+
+	DBG_printk("In dfx_eisa_init...\n");
+
+	/* Scan for FDDI EISA controllers */
+
+	for (i=0; i < DFX_MAX_EISA_SLOTS; i++)		/* only scan for up to 16 EISA slots */
+	{
+		port = (i << 12) + PI_ESIC_K_SLOT_ID;	/* port = I/O address for reading slot ID */
+		slot_id = inl(port);					/* read EISA HW (slot) ID */
+		if ((slot_id & 0xF0FFFFFF) == DEFEA_PRODUCT_ID)
+		{
+			port = (i << 12);					/* recalc base addr */
+
+			if (dfx_init_one_pci_or_eisa(NULL, port) == 0) rc = 0;
+		}
+	}
+	return rc;
+}
+
+/*
+ * ================
+ * = dfx_bus_init =
+ * ================
+ *   
+ * Overview:
+ *   Initializes EISA and PCI controller bus-specific logic.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Determine and save adapter IRQ in device table,
+ *   then perform bus-specific logic initialization.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   dev->base_addr has already been set with the proper
+ *	 base I/O address for this device.
+ *
+ * Side Effects:
+ *   Interrupts are enabled at the adapter bus-specific logic.
+ *   Note:  Interrupts at the DMA engine (PDQ chip) are not
+ *   enabled yet.
+ */
+
+static void __devinit dfx_bus_init(struct net_device *dev)
+{
+	DFX_board_t *bp = dev->priv;
+	u8			val;	/* used for I/O read/writes */
+
+	DBG_printk("In dfx_bus_init...\n");
+
+	/*
+	 * Initialize base I/O address field in bp structure
+	 *
+	 * Note: bp->base_addr is the same as dev->base_addr.
+	 *		 It's useful because often we'll need to read
+	 *		 or write registers where we already have the
+	 *		 bp pointer instead of the dev pointer.  Having
+	 *		 the base address in the bp structure will
+	 *		 save a pointer dereference.
+	 *
+	 *		 IMPORTANT!! This field must be defined before
+	 *		 any of the dfx_port_* inline functions are
+	 *		 called.
+	 */
+
+	bp->base_addr = dev->base_addr;
+
+	/* And a pointer back to the net_device struct */
+	bp->dev = dev;
+
+	/* Initialize adapter based on bus type */
+
+	if (bp->bus_type == DFX_BUS_TYPE_EISA)
+		{
+		/* Get the interrupt level from the ESIC chip */
+
+		dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &val);
+		switch ((val & PI_CONFIG_STAT_0_M_IRQ) >> PI_CONFIG_STAT_0_V_IRQ)
+			{
+			case PI_CONFIG_STAT_0_IRQ_K_9:
+				dev->irq = 9;
+				break;
+
+			case PI_CONFIG_STAT_0_IRQ_K_10:
+				dev->irq = 10;
+				break;
+
+			case PI_CONFIG_STAT_0_IRQ_K_11:
+				dev->irq = 11;
+				break;
+
+			case PI_CONFIG_STAT_0_IRQ_K_15:
+				dev->irq = 15;
+				break;
+			}
+
+		/* Enable access to I/O on the board by writing 0x03 to Function Control Register */
+
+		dfx_port_write_byte(bp, PI_ESIC_K_FUNCTION_CNTRL, PI_ESIC_K_FUNCTION_CNTRL_IO_ENB);
+
+		/* Set the I/O decode range of the board */
+
+		val = ((dev->base_addr >> 12) << PI_IO_CMP_V_SLOT);
+		dfx_port_write_byte(bp, PI_ESIC_K_IO_CMP_0_1, val);
+		dfx_port_write_byte(bp, PI_ESIC_K_IO_CMP_1_1, val);
+
+		/* Enable access to rest of module (including PDQ and packet memory) */
+
+		dfx_port_write_byte(bp, PI_ESIC_K_SLOT_CNTRL, PI_SLOT_CNTRL_M_ENB);
+
+		/*
+		 * Map PDQ registers into I/O space.  This is done by clearing a bit
+		 * in Burst Holdoff register.
+		 */
+
+		dfx_port_read_byte(bp, PI_ESIC_K_BURST_HOLDOFF, &val);
+		dfx_port_write_byte(bp, PI_ESIC_K_BURST_HOLDOFF, (val & ~PI_BURST_HOLDOFF_M_MEM_MAP));
+
+		/* Enable interrupts at EISA bus interface chip (ESIC) */
+
+		dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &val);
+		dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, (val | PI_CONFIG_STAT_0_M_INT_ENB));
+		}
+	else
+		{
+		struct pci_dev *pdev = bp->pci_dev;
+
+		/* Get the interrupt level from the PCI Configuration Table */
+
+		dev->irq = pdev->irq;
+
+		/* Check Latency Timer and set if less than minimal */
+
+		pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &val);
+		if (val < PFI_K_LAT_TIMER_MIN)	/* if less than min, override with default */
+			{
+			val = PFI_K_LAT_TIMER_DEF;
+			pci_write_config_byte(pdev, PCI_LATENCY_TIMER, val);
+			}
+
+		/* Enable interrupts at PCI bus interface chip (PFI) */
+
+		dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, (PFI_MODE_M_PDQ_INT_ENB | PFI_MODE_M_DMA_ENB));
+		}
+	}
+
+
+/*
+ * ========================
+ * = dfx_bus_config_check =
+ * ========================
+ *   
+ * Overview:
+ *   Checks the configuration (burst size, full-duplex, etc.)  If any parameters
+ *   are illegal, then this routine will set new defaults.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   For Revision 1 FDDI EISA, Revision 2 or later FDDI EISA with rev E or later
+ *   PDQ, and all FDDI PCI controllers, all values are legal.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   dfx_adap_init has NOT been called yet so burst size and other items have
+ *   not been set.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static void __devinit dfx_bus_config_check(DFX_board_t *bp)
+{
+	int	status;				/* return code from adapter port control call */
+	u32	slot_id;			/* EISA-bus hardware id (DEC3001, DEC3002,...) */
+	u32	host_data;			/* LW data returned from port control call */
+
+	DBG_printk("In dfx_bus_config_check...\n");
+
+	/* Configuration check only valid for EISA adapter */
+
+	if (bp->bus_type == DFX_BUS_TYPE_EISA)
+		{
+		dfx_port_read_long(bp, PI_ESIC_K_SLOT_ID, &slot_id);
+
+		/*
+		 * First check if revision 2 EISA controller.  Rev. 1 cards used
+		 * PDQ revision B, so no workaround needed in this case.  Rev. 3
+		 * cards used PDQ revision E, so no workaround needed in this
+		 * case, either.  Only Rev. 2 cards used either Rev. D or E
+		 * chips, so we must verify the chip revision on Rev. 2 cards.
+		 */
+
+		if (slot_id == DEFEA_PROD_ID_2)
+			{
+			/*
+			 * Revision 2 FDDI EISA controller found, so let's check PDQ
+			 * revision of adapter.
+			 */
+
+			status = dfx_hw_port_ctrl_req(bp,
+											PI_PCTRL_M_SUB_CMD,
+											PI_SUB_CMD_K_PDQ_REV_GET,
+											0,
+											&host_data);
+			if ((status != DFX_K_SUCCESS) || (host_data == 2))
+				{
+				/*
+				 * Either we couldn't determine the PDQ revision, or
+				 * we determined that it is at revision D.  In either case,
+				 * we need to implement the workaround.
+				 */
+
+				/* Ensure that the burst size is set to 8 longwords or less */
+
+				switch (bp->burst_size)
+					{
+					case PI_PDATA_B_DMA_BURST_SIZE_32:
+					case PI_PDATA_B_DMA_BURST_SIZE_16:
+						bp->burst_size = PI_PDATA_B_DMA_BURST_SIZE_8;
+						break;
+
+					default:
+						break;
+					}
+
+				/* Ensure that full-duplex mode is not enabled */
+
+				bp->full_duplex_enb = PI_SNMP_K_FALSE;
+				}
+			}
+		}
+	}
+
+
+/*
+ * ===================
+ * = dfx_driver_init =
+ * ===================
+ *   
+ * Overview:
+ *   Initializes remaining adapter board structure information
+ *   and makes sure adapter is in a safe state prior to dfx_open().
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *   print_name - printable device name
+ *
+ * Functional Description:
+ *   This function allocates additional resources such as the host memory
+ *   blocks needed by the adapter (eg. descriptor and consumer blocks).
+ *	 Remaining bus initialization steps are also completed.  The adapter
+ *   is also reset so that it is in the DMA_UNAVAILABLE state.  The OS
+ *   must call dfx_open() to open the adapter and bring it on-line.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS	- initialization succeeded
+ *   DFX_K_FAILURE	- initialization failed - could not allocate memory
+ *						or read adapter MAC address
+ *
+ * Assumptions:
+ *   Memory allocated from pci_alloc_consistent() call is physically
+ *   contiguous, locked memory.
+ *
+ * Side Effects:
+ *   Adapter is reset and should be in DMA_UNAVAILABLE state before
+ *   returning from this routine.
+ */
+
+static int __devinit dfx_driver_init(struct net_device *dev,
+				     const char *print_name)
+{
+	DFX_board_t *bp = dev->priv;
+	int			alloc_size;			/* total buffer size needed */
+	char		*top_v, *curr_v;	/* virtual addrs into memory block */
+	dma_addr_t		top_p, curr_p;		/* physical addrs into memory block */
+	u32			data;				/* host data register value */
+
+	DBG_printk("In dfx_driver_init...\n");
+
+	/* Initialize bus-specific hardware registers */
+
+	dfx_bus_init(dev);
+
+	/*
+	 * Initialize default values for configurable parameters
+	 *
+	 * Note: All of these parameters are ones that a user may
+	 *       want to customize.  It'd be nice to break these
+	 *		 out into Space.c or someplace else that's more
+	 *		 accessible/understandable than this file.
+	 */
+
+	bp->full_duplex_enb		= PI_SNMP_K_FALSE;
+	bp->req_ttrt			= 8 * 12500;		/* 8ms in 80 nanosec units */
+	bp->burst_size			= PI_PDATA_B_DMA_BURST_SIZE_DEF;
+	bp->rcv_bufs_to_post	= RCV_BUFS_DEF;
+
+	/*
+	 * Ensure that HW configuration is OK
+	 *
+	 * Note: Depending on the hardware revision, we may need to modify
+	 *       some of the configurable parameters to workaround hardware
+	 *       limitations.  We'll perform this configuration check AFTER
+	 *       setting the parameters to their default values.
+	 */
+
+	dfx_bus_config_check(bp);
+
+	/* Disable PDQ interrupts first */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+	/* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+	(void) dfx_hw_dma_uninit(bp, PI_PDATA_A_RESET_M_SKIP_ST);
+
+	/*  Read the factory MAC address from the adapter then save it */
+
+	if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_LO, 0,
+				 &data) != DFX_K_SUCCESS) {
+		printk("%s: Could not read adapter factory MAC address!\n",
+		       print_name);
+		return(DFX_K_FAILURE);
+	}
+	memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32));
+
+	if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
+				 &data) != DFX_K_SUCCESS) {
+		printk("%s: Could not read adapter factory MAC address!\n",
+		       print_name);
+		return(DFX_K_FAILURE);
+	}
+	memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16));
+
+	/*
+	 * Set current address to factory address
+	 *
+	 * Note: Node address override support is handled through
+	 *       dfx_ctl_set_mac_address.
+	 */
+
+	memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
+	if (bp->bus_type == DFX_BUS_TYPE_EISA)
+		printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, "
+		       "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
+		       print_name, dev->base_addr, dev->irq,
+		       dev->dev_addr[0], dev->dev_addr[1],
+		       dev->dev_addr[2], dev->dev_addr[3],
+		       dev->dev_addr[4], dev->dev_addr[5]);
+	else
+		printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, "
+		       "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
+		       print_name, dev->base_addr, dev->irq,
+		       dev->dev_addr[0], dev->dev_addr[1],
+		       dev->dev_addr[2], dev->dev_addr[3],
+		       dev->dev_addr[4], dev->dev_addr[5]);
+
+	/*
+	 * Get memory for descriptor block, consumer block, and other buffers
+	 * that need to be DMA read or written to by the adapter.
+	 */
+
+	alloc_size = sizeof(PI_DESCR_BLOCK) +
+					PI_CMD_REQ_K_SIZE_MAX +
+					PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+					(bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+					sizeof(PI_CONSUMER_BLOCK) +
+					(PI_ALIGN_K_DESC_BLK - 1);
+	bp->kmalloced = top_v = pci_alloc_consistent(bp->pci_dev, alloc_size,
+						     &bp->kmalloced_dma);
+	if (top_v == NULL) {
+		printk("%s: Could not allocate memory for host buffers "
+		       "and structures!\n", print_name);
+		return(DFX_K_FAILURE);
+	}
+	memset(top_v, 0, alloc_size);	/* zero out memory before continuing */
+	top_p = bp->kmalloced_dma;	/* get physical address of buffer */
+
+	/*
+	 *  To guarantee the 8K alignment required for the descriptor block, 8K - 1
+	 *  plus the amount of memory needed was allocated.  The physical address
+	 *	is now 8K aligned.  By carving up the memory in a specific order,
+	 *  we'll guarantee the alignment requirements for all other structures.
+	 *
+	 *  Note: If the assumptions change regarding the non-paged, non-cached,
+	 *		  physically contiguous nature of the memory block or the address
+	 *		  alignments, then we'll need to implement a different algorithm
+	 *		  for allocating the needed memory.
+	 */
+
+	curr_p = ALIGN(top_p, PI_ALIGN_K_DESC_BLK);
+	curr_v = top_v + (curr_p - top_p);
+
+	/* Reserve space for descriptor block */
+
+	bp->descr_block_virt = (PI_DESCR_BLOCK *) curr_v;
+	bp->descr_block_phys = curr_p;
+	curr_v += sizeof(PI_DESCR_BLOCK);
+	curr_p += sizeof(PI_DESCR_BLOCK);
+
+	/* Reserve space for command request buffer */
+
+	bp->cmd_req_virt = (PI_DMA_CMD_REQ *) curr_v;
+	bp->cmd_req_phys = curr_p;
+	curr_v += PI_CMD_REQ_K_SIZE_MAX;
+	curr_p += PI_CMD_REQ_K_SIZE_MAX;
+
+	/* Reserve space for command response buffer */
+
+	bp->cmd_rsp_virt = (PI_DMA_CMD_RSP *) curr_v;
+	bp->cmd_rsp_phys = curr_p;
+	curr_v += PI_CMD_RSP_K_SIZE_MAX;
+	curr_p += PI_CMD_RSP_K_SIZE_MAX;
+
+	/* Reserve space for the LLC host receive queue buffers */
+
+	bp->rcv_block_virt = curr_v;
+	bp->rcv_block_phys = curr_p;
+
+#ifndef DYNAMIC_BUFFERS
+	curr_v += (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX);
+	curr_p += (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX);
+#endif
+
+	/* Reserve space for the consumer block */
+
+	bp->cons_block_virt = (PI_CONSUMER_BLOCK *) curr_v;
+	bp->cons_block_phys = curr_p;
+
+	/* Display virtual and physical addresses if debug driver */
+
+	DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n",
+		   print_name,
+		   (long)bp->descr_block_virt, bp->descr_block_phys);
+	DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n",
+		   print_name, (long)bp->cmd_req_virt, bp->cmd_req_phys);
+	DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n",
+		   print_name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys);
+	DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n",
+		   print_name, (long)bp->rcv_block_virt, bp->rcv_block_phys);
+	DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n",
+		   print_name, (long)bp->cons_block_virt, bp->cons_block_phys);
+
+	return(DFX_K_SUCCESS);
+}
+
+
+/*
+ * =================
+ * = dfx_adap_init =
+ * =================
+ *   
+ * Overview:
+ *   Brings the adapter to the link avail/link unavailable state.
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *   get_buffers - non-zero if buffers to be allocated
+ *
+ * Functional Description:
+ *   Issues the low-level firmware/hardware calls necessary to bring
+ *   the adapter up, or to properly reset and restore adapter during
+ *   run-time.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS - Adapter brought up successfully
+ *   DFX_K_FAILURE - Adapter initialization failed
+ *
+ * Assumptions:
+ *   bp->reset_type should be set to a valid reset type value before
+ *   calling this routine.
+ *
+ * Side Effects:
+ *   Adapter should be in LINK_AVAILABLE or LINK_UNAVAILABLE state
+ *   upon a successful return of this routine.
+ */
+
+static int dfx_adap_init(DFX_board_t *bp, int get_buffers)
+	{
+	DBG_printk("In dfx_adap_init...\n");
+
+	/* Disable PDQ interrupts first */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+	/* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+	if (dfx_hw_dma_uninit(bp, bp->reset_type) != DFX_K_SUCCESS)
+		{
+		printk("%s: Could not uninitialize/reset adapter!\n", bp->dev->name);
+		return(DFX_K_FAILURE);
+		}
+
+	/*
+	 * When the PDQ is reset, some false Type 0 interrupts may be pending,
+	 * so we'll acknowledge all Type 0 interrupts now before continuing.
+	 */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, PI_HOST_INT_K_ACK_ALL_TYPE_0);
+
+	/*
+	 * Clear Type 1 and Type 2 registers before going to DMA_AVAILABLE state
+	 *
+	 * Note: We only need to clear host copies of these registers.  The PDQ reset
+	 *       takes care of the on-board register values.
+	 */
+
+	bp->cmd_req_reg.lword	= 0;
+	bp->cmd_rsp_reg.lword	= 0;
+	bp->rcv_xmt_reg.lword	= 0;
+
+	/* Clear consumer block before going to DMA_AVAILABLE state */
+
+	memset(bp->cons_block_virt, 0, sizeof(PI_CONSUMER_BLOCK));
+
+	/* Initialize the DMA Burst Size */
+
+	if (dfx_hw_port_ctrl_req(bp,
+							PI_PCTRL_M_SUB_CMD,
+							PI_SUB_CMD_K_BURST_SIZE_SET,
+							bp->burst_size,
+							NULL) != DFX_K_SUCCESS)
+		{
+		printk("%s: Could not set adapter burst size!\n", bp->dev->name);
+		return(DFX_K_FAILURE);
+		}
+
+	/*
+	 * Set base address of Consumer Block
+	 *
+	 * Assumption: 32-bit physical address of consumer block is 64 byte
+	 *			   aligned.  That is, bits 0-5 of the address must be zero.
+	 */
+
+	if (dfx_hw_port_ctrl_req(bp,
+							PI_PCTRL_M_CONS_BLOCK,
+							bp->cons_block_phys,
+							0,
+							NULL) != DFX_K_SUCCESS)
+		{
+		printk("%s: Could not set consumer block address!\n", bp->dev->name);
+		return(DFX_K_FAILURE);
+		}
+
+	/*
+	 * Set base address of Descriptor Block and bring adapter to DMA_AVAILABLE state
+	 *
+	 * Note: We also set the literal and data swapping requirements in this
+	 *	     command.  Since this driver presently runs on Intel platforms
+	 *		 which are Little Endian, we'll tell the adapter to byte swap
+	 *		 data only.  This code will need to change when we support
+	 *		 Big Endian systems (eg. PowerPC).
+	 *
+	 * Assumption: 32-bit physical address of descriptor block is 8Kbyte
+	 *             aligned.  That is, bits 0-12 of the address must be zero.
+	 */
+
+	if (dfx_hw_port_ctrl_req(bp,
+							PI_PCTRL_M_INIT,
+							(u32) (bp->descr_block_phys | PI_PDATA_A_INIT_M_BSWAP_DATA),
+							0,
+							NULL) != DFX_K_SUCCESS)
+		{
+		printk("%s: Could not set descriptor block address!\n", bp->dev->name);
+		return(DFX_K_FAILURE);
+		}
+
+	/* Set transmit flush timeout value */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_CHARS_SET;
+	bp->cmd_req_virt->char_set.item[0].item_code	= PI_ITEM_K_FLUSH_TIME;
+	bp->cmd_req_virt->char_set.item[0].value		= 3;	/* 3 seconds */
+	bp->cmd_req_virt->char_set.item[0].item_index	= 0;
+	bp->cmd_req_virt->char_set.item[1].item_code	= PI_ITEM_K_EOL;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: DMA command request failed!\n", bp->dev->name);
+		return(DFX_K_FAILURE);
+		}
+
+	/* Set the initial values for eFDXEnable and MACTReq MIB objects */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_SNMP_SET;
+	bp->cmd_req_virt->snmp_set.item[0].item_code	= PI_ITEM_K_FDX_ENB_DIS;
+	bp->cmd_req_virt->snmp_set.item[0].value		= bp->full_duplex_enb;
+	bp->cmd_req_virt->snmp_set.item[0].item_index	= 0;
+	bp->cmd_req_virt->snmp_set.item[1].item_code	= PI_ITEM_K_MAC_T_REQ;
+	bp->cmd_req_virt->snmp_set.item[1].value		= bp->req_ttrt;
+	bp->cmd_req_virt->snmp_set.item[1].item_index	= 0;
+	bp->cmd_req_virt->snmp_set.item[2].item_code	= PI_ITEM_K_EOL;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: DMA command request failed!\n", bp->dev->name);
+		return(DFX_K_FAILURE);
+		}
+
+	/* Initialize adapter CAM */
+
+	if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: Adapter CAM update failed!\n", bp->dev->name);
+		return(DFX_K_FAILURE);
+		}
+
+	/* Initialize adapter filters */
+
+	if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: Adapter filters update failed!\n", bp->dev->name);
+		return(DFX_K_FAILURE);
+		}
+
+	/*
+	 * Remove any existing dynamic buffers (i.e. if the adapter is being
+	 * reinitialized)
+	 */
+
+	if (get_buffers)
+		dfx_rcv_flush(bp);
+
+	/* Initialize receive descriptor block and produce buffers */
+
+	if (dfx_rcv_init(bp, get_buffers))
+	        {
+		printk("%s: Receive buffer allocation failed\n", bp->dev->name);
+		if (get_buffers)
+			dfx_rcv_flush(bp);
+		return(DFX_K_FAILURE);
+		}
+
+	/* Issue START command and bring adapter to LINK_(UN)AVAILABLE state */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_START;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		{
+		printk("%s: Start command failed\n", bp->dev->name);
+		if (get_buffers)
+			dfx_rcv_flush(bp);
+		return(DFX_K_FAILURE);
+		}
+
+	/* Initialization succeeded, reenable PDQ interrupts */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_ENABLE_DEF_INTS);
+	return(DFX_K_SUCCESS);
+	}
+
+
+/*
+ * ============
+ * = dfx_open =
+ * ============
+ *   
+ * Overview:
+ *   Opens the adapter
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This function brings the adapter to an operational state.
+ *
+ * Return Codes:
+ *   0		 - Adapter was successfully opened
+ *   -EAGAIN - Could not register IRQ or adapter initialization failed
+ *
+ * Assumptions:
+ *   This routine should only be called for a device that was
+ *   initialized successfully.
+ *
+ * Side Effects:
+ *   Adapter should be in LINK_AVAILABLE or LINK_UNAVAILABLE state
+ *   if the open is successful.
+ */
+
+static int dfx_open(struct net_device *dev)
+{
+	int ret;
+	DFX_board_t	*bp = dev->priv;
+
+	DBG_printk("In dfx_open...\n");
+	
+	/* Register IRQ - support shared interrupts by passing device ptr */
+
+	ret = request_irq(dev->irq, (void *)dfx_interrupt, SA_SHIRQ, dev->name, dev);
+	if (ret) {
+		printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
+		return ret;
+	}
+
+	/*
+	 * Set current address to factory MAC address
+	 *
+	 * Note: We've already done this step in dfx_driver_init.
+	 *       However, it's possible that a user has set a node
+	 *		 address override, then closed and reopened the
+	 *		 adapter.  Unless we reset the device address field
+	 *		 now, we'll continue to use the existing modified
+	 *		 address.
+	 */
+
+	memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
+
+	/* Clear local unicast/multicast address tables and counts */
+
+	memset(bp->uc_table, 0, sizeof(bp->uc_table));
+	memset(bp->mc_table, 0, sizeof(bp->mc_table));
+	bp->uc_count = 0;
+	bp->mc_count = 0;
+
+	/* Disable promiscuous filter settings */
+
+	bp->ind_group_prom	= PI_FSTATE_K_BLOCK;
+	bp->group_prom		= PI_FSTATE_K_BLOCK;
+
+	spin_lock_init(&bp->lock);
+
+	/* Reset and initialize adapter */
+
+	bp->reset_type = PI_PDATA_A_RESET_M_SKIP_ST;	/* skip self-test */
+	if (dfx_adap_init(bp, 1) != DFX_K_SUCCESS)
+	{
+		printk(KERN_ERR "%s: Adapter open failed!\n", dev->name);
+		free_irq(dev->irq, dev);
+		return -EAGAIN;
+	}
+
+	/* Set device structure info */
+	netif_start_queue(dev);
+	return(0);
+}
+
+
+/*
+ * =============
+ * = dfx_close =
+ * =============
+ *   
+ * Overview:
+ *   Closes the device/module.
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This routine closes the adapter and brings it to a safe state.
+ *   The interrupt service routine is deregistered with the OS.
+ *   The adapter can be opened again with another call to dfx_open().
+ *
+ * Return Codes:
+ *   Always return 0.
+ *
+ * Assumptions:
+ *   No further requests for this adapter are made after this routine is
+ *   called.  dfx_open() can be called to reset and reinitialize the
+ *   adapter.
+ *
+ * Side Effects:
+ *   Adapter should be in DMA_UNAVAILABLE state upon completion of this
+ *   routine.
+ */
+
+static int dfx_close(struct net_device *dev)
+{
+	DFX_board_t	*bp = dev->priv;
+
+	DBG_printk("In dfx_close...\n");
+
+	/* Disable PDQ interrupts first */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+
+	/* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
+
+	(void) dfx_hw_dma_uninit(bp, PI_PDATA_A_RESET_M_SKIP_ST);
+
+	/*
+	 * Flush any pending transmit buffers
+	 *
+	 * Note: It's important that we flush the transmit buffers
+	 *		 BEFORE we clear our copy of the Type 2 register.
+	 *		 Otherwise, we'll have no idea how many buffers
+	 *		 we need to free.
+	 */
+
+	dfx_xmt_flush(bp);
+
+	/*
+	 * Clear Type 1 and Type 2 registers after adapter reset
+	 *
+	 * Note: Even though we're closing the adapter, it's
+	 *       possible that an interrupt will occur after
+	 *		 dfx_close is called.  Without some assurance to
+	 *		 the contrary we want to make sure that we don't
+	 *		 process receive and transmit LLC frames and update
+	 *		 the Type 2 register with bad information.
+	 */
+
+	bp->cmd_req_reg.lword	= 0;
+	bp->cmd_rsp_reg.lword	= 0;
+	bp->rcv_xmt_reg.lword	= 0;
+
+	/* Clear consumer block for the same reason given above */
+
+	memset(bp->cons_block_virt, 0, sizeof(PI_CONSUMER_BLOCK));
+
+	/* Release all dynamically allocate skb in the receive ring. */
+
+	dfx_rcv_flush(bp);
+
+	/* Clear device structure flags */
+
+	netif_stop_queue(dev);
+	
+	/* Deregister (free) IRQ */
+
+	free_irq(dev->irq, dev);
+	
+	return(0);
+}
+
+
+/*
+ * ======================
+ * = dfx_int_pr_halt_id =
+ * ======================
+ *   
+ * Overview:
+ *   Displays halt id's in string form.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Determine current halt id and display appropriate string.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static void dfx_int_pr_halt_id(DFX_board_t	*bp)
+	{
+	PI_UINT32	port_status;			/* PDQ port status register value */
+	PI_UINT32	halt_id;				/* PDQ port status halt ID */
+
+	/* Read the latest port status */
+
+	dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+
+	/* Display halt state transition information */
+
+	halt_id = (port_status & PI_PSTATUS_M_HALT_ID) >> PI_PSTATUS_V_HALT_ID;
+	switch (halt_id)
+		{
+		case PI_HALT_ID_K_SELFTEST_TIMEOUT:
+			printk("%s: Halt ID: Selftest Timeout\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_PARITY_ERROR:
+			printk("%s: Halt ID: Host Bus Parity Error\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_HOST_DIR_HALT:
+			printk("%s: Halt ID: Host-Directed Halt\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_SW_FAULT:
+			printk("%s: Halt ID: Adapter Software Fault\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_HW_FAULT:
+			printk("%s: Halt ID: Adapter Hardware Fault\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_PC_TRACE:
+			printk("%s: Halt ID: FDDI Network PC Trace Path Test\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_DMA_ERROR:
+			printk("%s: Halt ID: Adapter DMA Error\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_IMAGE_CRC_ERROR:
+			printk("%s: Halt ID: Firmware Image CRC Error\n", bp->dev->name);
+			break;
+
+		case PI_HALT_ID_K_BUS_EXCEPTION:
+			printk("%s: Halt ID: 68000 Bus Exception\n", bp->dev->name);
+			break;
+
+		default:
+			printk("%s: Halt ID: Unknown (code = %X)\n", bp->dev->name, halt_id);
+			break;
+		}
+	}
+
+
+/*
+ * ==========================
+ * = dfx_int_type_0_process =
+ * ==========================
+ *   
+ * Overview:
+ *   Processes Type 0 interrupts.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Processes all enabled Type 0 interrupts.  If the reason for the interrupt
+ *   is a serious fault on the adapter, then an error message is displayed
+ *   and the adapter is reset.
+ *
+ *   One tricky potential timing window is the rapid succession of "link avail"
+ *   "link unavail" state change interrupts.  The acknowledgement of the Type 0
+ *   interrupt must be done before reading the state from the Port Status
+ *   register.  This is true because a state change could occur after reading
+ *   the data, but before acknowledging the interrupt.  If this state change
+ *   does happen, it would be lost because the driver is using the old state,
+ *   and it will never know about the new state because it subsequently
+ *   acknowledges the state change interrupt.
+ *
+ *          INCORRECT                                      CORRECT
+ *      read type 0 int reasons                   read type 0 int reasons
+ *      read adapter state                        ack type 0 interrupts
+ *      ack type 0 interrupts                     read adapter state
+ *      ... process interrupt ...                 ... process interrupt ...
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   An adapter reset may occur if the adapter has any Type 0 error interrupts
+ *   or if the port status indicates that the adapter is halted.  The driver
+ *   is responsible for reinitializing the adapter with the current CAM
+ *   contents and adapter filter settings.
+ */
+
+static void dfx_int_type_0_process(DFX_board_t	*bp)
+
+	{
+	PI_UINT32	type_0_status;		/* Host Interrupt Type 0 register */
+	PI_UINT32	state;				/* current adap state (from port status) */
+
+	/*
+	 * Read host interrupt Type 0 register to determine which Type 0
+	 * interrupts are pending.  Immediately write it back out to clear
+	 * those interrupts.
+	 */
+
+	dfx_port_read_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, &type_0_status);
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, type_0_status);
+
+	/* Check for Type 0 error interrupts */
+
+	if (type_0_status & (PI_TYPE_0_STAT_M_NXM |
+							PI_TYPE_0_STAT_M_PM_PAR_ERR |
+							PI_TYPE_0_STAT_M_BUS_PAR_ERR))
+		{
+		/* Check for Non-Existent Memory error */
+
+		if (type_0_status & PI_TYPE_0_STAT_M_NXM)
+			printk("%s: Non-Existent Memory Access Error\n", bp->dev->name);
+
+		/* Check for Packet Memory Parity error */
+
+		if (type_0_status & PI_TYPE_0_STAT_M_PM_PAR_ERR)
+			printk("%s: Packet Memory Parity Error\n", bp->dev->name);
+
+		/* Check for Host Bus Parity error */
+
+		if (type_0_status & PI_TYPE_0_STAT_M_BUS_PAR_ERR)
+			printk("%s: Host Bus Parity Error\n", bp->dev->name);
+
+		/* Reset adapter and bring it back on-line */
+
+		bp->link_available = PI_K_FALSE;	/* link is no longer available */
+		bp->reset_type = 0;					/* rerun on-board diagnostics */
+		printk("%s: Resetting adapter...\n", bp->dev->name);
+		if (dfx_adap_init(bp, 0) != DFX_K_SUCCESS)
+			{
+			printk("%s: Adapter reset failed!  Disabling adapter interrupts.\n", bp->dev->name);
+			dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+			return;
+			}
+		printk("%s: Adapter reset successful!\n", bp->dev->name);
+		return;
+		}
+
+	/* Check for transmit flush interrupt */
+
+	if (type_0_status & PI_TYPE_0_STAT_M_XMT_FLUSH)
+		{
+		/* Flush any pending xmt's and acknowledge the flush interrupt */
+
+		bp->link_available = PI_K_FALSE;		/* link is no longer available */
+		dfx_xmt_flush(bp);						/* flush any outstanding packets */
+		(void) dfx_hw_port_ctrl_req(bp,
+									PI_PCTRL_M_XMT_DATA_FLUSH_DONE,
+									0,
+									0,
+									NULL);
+		}
+
+	/* Check for adapter state change */
+
+	if (type_0_status & PI_TYPE_0_STAT_M_STATE_CHANGE)
+		{                     
+		/* Get latest adapter state */
+
+		state = dfx_hw_adap_state_rd(bp);	/* get adapter state */
+		if (state == PI_STATE_K_HALTED)
+			{
+			/*
+			 * Adapter has transitioned to HALTED state, try to reset
+			 * adapter to bring it back on-line.  If reset fails,
+			 * leave the adapter in the broken state.
+			 */
+
+			printk("%s: Controller has transitioned to HALTED state!\n", bp->dev->name);
+			dfx_int_pr_halt_id(bp);			/* display halt id as string */
+
+			/* Reset adapter and bring it back on-line */
+
+			bp->link_available = PI_K_FALSE;	/* link is no longer available */
+			bp->reset_type = 0;					/* rerun on-board diagnostics */
+			printk("%s: Resetting adapter...\n", bp->dev->name);
+			if (dfx_adap_init(bp, 0) != DFX_K_SUCCESS)
+				{
+				printk("%s: Adapter reset failed!  Disabling adapter interrupts.\n", bp->dev->name);
+				dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
+				return;
+				}
+			printk("%s: Adapter reset successful!\n", bp->dev->name);
+			}
+		else if (state == PI_STATE_K_LINK_AVAIL)
+			{
+			bp->link_available = PI_K_TRUE;		/* set link available flag */
+			}
+		}
+	}
+
+
+/*
+ * ==================
+ * = dfx_int_common =
+ * ==================
+ *   
+ * Overview:
+ *   Interrupt service routine (ISR)
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   This is the ISR which processes incoming adapter interrupts.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   This routine assumes PDQ interrupts have not been disabled.
+ *   When interrupts are disabled at the PDQ, the Port Status register
+ *   is automatically cleared.  This routine uses the Port Status
+ *   register value to determine whether a Type 0 interrupt occurred,
+ *   so it's important that adapter interrupts are not normally
+ *   enabled/disabled at the PDQ.
+ *
+ *   It's vital that this routine is NOT reentered for the
+ *   same board and that the OS is not in another section of
+ *   code (eg. dfx_xmt_queue_pkt) for the same board on a
+ *   different thread.
+ *
+ * Side Effects:
+ *   Pending interrupts are serviced.  Depending on the type of
+ *   interrupt, acknowledging and clearing the interrupt at the
+ *   PDQ involves writing a register to clear the interrupt bit
+ *   or updating completion indices.
+ */
+
+static void dfx_int_common(struct net_device *dev)
+{
+	DFX_board_t 	*bp = dev->priv;
+	PI_UINT32	port_status;		/* Port Status register */
+
+	/* Process xmt interrupts - frequent case, so always call this routine */
+
+	if(dfx_xmt_done(bp))				/* free consumed xmt packets */
+		netif_wake_queue(dev);
+
+	/* Process rcv interrupts - frequent case, so always call this routine */
+
+	dfx_rcv_queue_process(bp);		/* service received LLC frames */
+
+	/*
+	 * Transmit and receive producer and completion indices are updated on the
+	 * adapter by writing to the Type 2 Producer register.  Since the frequent
+	 * case is that we'll be processing either LLC transmit or receive buffers,
+	 * we'll optimize I/O writes by doing a single register write here.
+	 */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+
+	/* Read PDQ Port Status register to find out which interrupts need processing */
+
+	dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+
+	/* Process Type 0 interrupts (if any) - infrequent, so only call when needed */
+
+	if (port_status & PI_PSTATUS_M_TYPE_0_PENDING)
+		dfx_int_type_0_process(bp);	/* process Type 0 interrupts */
+	}
+
+
+/*
+ * =================
+ * = dfx_interrupt =
+ * =================
+ *   
+ * Overview:
+ *   Interrupt processing routine
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   irq	- interrupt vector
+ *   dev_id	- pointer to device information
+ *	 regs	- pointer to registers structure
+ *
+ * Functional Description:
+ *   This routine calls the interrupt processing routine for this adapter.  It
+ *   disables and reenables adapter interrupts, as appropriate.  We can support
+ *   shared interrupts since the incoming dev_id pointer provides our device
+ *   structure context.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   The interrupt acknowledgement at the hardware level (eg. ACKing the PIC
+ *   on Intel-based systems) is done by the operating system outside this
+ *   routine.
+ *
+ *	 System interrupts are enabled through this call.
+ *
+ * Side Effects:
+ *   Interrupts are disabled, then reenabled at the adapter.
+ */
+
+static void dfx_interrupt(int irq, void *dev_id, struct pt_regs	*regs)
+	{
+	struct net_device	*dev = dev_id;
+	DFX_board_t		*bp;	/* private board structure pointer */
+	u8				tmp;	/* used for disabling/enabling ints */
+
+	/* Get board pointer only if device structure is valid */
+
+	bp = dev->priv;
+
+	spin_lock(&bp->lock);
+	
+	/* See if we're already servicing an interrupt */
+
+	/* Service adapter interrupts */
+
+	if (bp->bus_type == DFX_BUS_TYPE_PCI)
+		{
+		/* Disable PDQ-PFI interrupts at PFI */
+
+		dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, PFI_MODE_M_DMA_ENB);
+
+		/* Call interrupt service routine for this adapter */
+
+		dfx_int_common(dev);
+
+		/* Clear PDQ interrupt status bit and reenable interrupts */
+
+		dfx_port_write_long(bp, PFI_K_REG_STATUS, PFI_STATUS_M_PDQ_INT);
+		dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
+					(PFI_MODE_M_PDQ_INT_ENB + PFI_MODE_M_DMA_ENB));
+		}
+	else
+		{
+		/* Disable interrupts at the ESIC */
+
+		dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &tmp);
+		tmp &= ~PI_CONFIG_STAT_0_M_INT_ENB;
+		dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, tmp);
+
+		/* Call interrupt service routine for this adapter */
+
+		dfx_int_common(dev);
+
+		/* Reenable interrupts at the ESIC */
+
+		dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &tmp);
+		tmp |= PI_CONFIG_STAT_0_M_INT_ENB;
+		dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, tmp);
+		}
+
+	spin_unlock(&bp->lock);
+	}
+
+
+/*
+ * =====================
+ * = dfx_ctl_get_stats =
+ * =====================
+ *   
+ * Overview:
+ *   Get statistics for FDDI adapter
+ *  
+ * Returns:
+ *   Pointer to FDDI statistics structure
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Gets current MIB objects from adapter, then
+ *   returns FDDI statistics structure as defined
+ *   in if_fddi.h.
+ *
+ *   Note: Since the FDDI statistics structure is
+ *   still new and the device structure doesn't
+ *   have an FDDI-specific get statistics handler,
+ *   we'll return the FDDI statistics structure as
+ *   a pointer to an Ethernet statistics structure.
+ *   That way, at least the first part of the statistics
+ *   structure can be decoded properly, and it allows
+ *   "smart" applications to perform a second cast to
+ *   decode the FDDI-specific statistics.
+ *
+ *   We'll have to pay attention to this routine as the
+ *   device structure becomes more mature and LAN media
+ *   independent.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static struct net_device_stats *dfx_ctl_get_stats(struct net_device *dev)
+	{
+	DFX_board_t	*bp = dev->priv;
+
+	/* Fill the bp->stats structure with driver-maintained counters */
+
+	bp->stats.gen.rx_packets = bp->rcv_total_frames;
+	bp->stats.gen.tx_packets = bp->xmt_total_frames;
+	bp->stats.gen.rx_bytes   = bp->rcv_total_bytes;
+	bp->stats.gen.tx_bytes   = bp->xmt_total_bytes;
+	bp->stats.gen.rx_errors  = bp->rcv_crc_errors +
+				   bp->rcv_frame_status_errors +
+				   bp->rcv_length_errors;
+	bp->stats.gen.tx_errors  = bp->xmt_length_errors;
+	bp->stats.gen.rx_dropped = bp->rcv_discards;
+	bp->stats.gen.tx_dropped = bp->xmt_discards;
+	bp->stats.gen.multicast  = bp->rcv_multicast_frames;
+	bp->stats.gen.collisions = 0;		/* always zero (0) for FDDI */
+
+	/* Get FDDI SMT MIB objects */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_SMT_MIB_GET;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		return((struct net_device_stats *) &bp->stats);
+
+	/* Fill the bp->stats structure with the SMT MIB object values */
+
+	memcpy(bp->stats.smt_station_id, &bp->cmd_rsp_virt->smt_mib_get.smt_station_id, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_station_id));
+	bp->stats.smt_op_version_id					= bp->cmd_rsp_virt->smt_mib_get.smt_op_version_id;
+	bp->stats.smt_hi_version_id					= bp->cmd_rsp_virt->smt_mib_get.smt_hi_version_id;
+	bp->stats.smt_lo_version_id					= bp->cmd_rsp_virt->smt_mib_get.smt_lo_version_id;
+	memcpy(bp->stats.smt_user_data, &bp->cmd_rsp_virt->smt_mib_get.smt_user_data, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_user_data));
+	bp->stats.smt_mib_version_id				= bp->cmd_rsp_virt->smt_mib_get.smt_mib_version_id;
+	bp->stats.smt_mac_cts						= bp->cmd_rsp_virt->smt_mib_get.smt_mac_ct;
+	bp->stats.smt_non_master_cts				= bp->cmd_rsp_virt->smt_mib_get.smt_non_master_ct;
+	bp->stats.smt_master_cts					= bp->cmd_rsp_virt->smt_mib_get.smt_master_ct;
+	bp->stats.smt_available_paths				= bp->cmd_rsp_virt->smt_mib_get.smt_available_paths;
+	bp->stats.smt_config_capabilities			= bp->cmd_rsp_virt->smt_mib_get.smt_config_capabilities;
+	bp->stats.smt_config_policy					= bp->cmd_rsp_virt->smt_mib_get.smt_config_policy;
+	bp->stats.smt_connection_policy				= bp->cmd_rsp_virt->smt_mib_get.smt_connection_policy;
+	bp->stats.smt_t_notify						= bp->cmd_rsp_virt->smt_mib_get.smt_t_notify;
+	bp->stats.smt_stat_rpt_policy				= bp->cmd_rsp_virt->smt_mib_get.smt_stat_rpt_policy;
+	bp->stats.smt_trace_max_expiration			= bp->cmd_rsp_virt->smt_mib_get.smt_trace_max_expiration;
+	bp->stats.smt_bypass_present				= bp->cmd_rsp_virt->smt_mib_get.smt_bypass_present;
+	bp->stats.smt_ecm_state						= bp->cmd_rsp_virt->smt_mib_get.smt_ecm_state;
+	bp->stats.smt_cf_state						= bp->cmd_rsp_virt->smt_mib_get.smt_cf_state;
+	bp->stats.smt_remote_disconnect_flag		= bp->cmd_rsp_virt->smt_mib_get.smt_remote_disconnect_flag;
+	bp->stats.smt_station_status				= bp->cmd_rsp_virt->smt_mib_get.smt_station_status;
+	bp->stats.smt_peer_wrap_flag				= bp->cmd_rsp_virt->smt_mib_get.smt_peer_wrap_flag;
+	bp->stats.smt_time_stamp					= bp->cmd_rsp_virt->smt_mib_get.smt_msg_time_stamp.ls;
+	bp->stats.smt_transition_time_stamp			= bp->cmd_rsp_virt->smt_mib_get.smt_transition_time_stamp.ls;
+	bp->stats.mac_frame_status_functions		= bp->cmd_rsp_virt->smt_mib_get.mac_frame_status_functions;
+	bp->stats.mac_t_max_capability				= bp->cmd_rsp_virt->smt_mib_get.mac_t_max_capability;
+	bp->stats.mac_tvx_capability				= bp->cmd_rsp_virt->smt_mib_get.mac_tvx_capability;
+	bp->stats.mac_available_paths				= bp->cmd_rsp_virt->smt_mib_get.mac_available_paths;
+	bp->stats.mac_current_path					= bp->cmd_rsp_virt->smt_mib_get.mac_current_path;
+	memcpy(bp->stats.mac_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_upstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_downstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_old_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_upstream_nbr, FDDI_K_ALEN);
+	memcpy(bp->stats.mac_old_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_downstream_nbr, FDDI_K_ALEN);
+	bp->stats.mac_dup_address_test				= bp->cmd_rsp_virt->smt_mib_get.mac_dup_address_test;
+	bp->stats.mac_requested_paths				= bp->cmd_rsp_virt->smt_mib_get.mac_requested_paths;
+	bp->stats.mac_downstream_port_type			= bp->cmd_rsp_virt->smt_mib_get.mac_downstream_port_type;
+	memcpy(bp->stats.mac_smt_address, &bp->cmd_rsp_virt->smt_mib_get.mac_smt_address, FDDI_K_ALEN);
+	bp->stats.mac_t_req							= bp->cmd_rsp_virt->smt_mib_get.mac_t_req;
+	bp->stats.mac_t_neg							= bp->cmd_rsp_virt->smt_mib_get.mac_t_neg;
+	bp->stats.mac_t_max							= bp->cmd_rsp_virt->smt_mib_get.mac_t_max;
+	bp->stats.mac_tvx_value						= bp->cmd_rsp_virt->smt_mib_get.mac_tvx_value;
+	bp->stats.mac_frame_error_threshold			= bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_threshold;
+	bp->stats.mac_frame_error_ratio				= bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_ratio;
+	bp->stats.mac_rmt_state						= bp->cmd_rsp_virt->smt_mib_get.mac_rmt_state;
+	bp->stats.mac_da_flag						= bp->cmd_rsp_virt->smt_mib_get.mac_da_flag;
+	bp->stats.mac_una_da_flag					= bp->cmd_rsp_virt->smt_mib_get.mac_unda_flag;
+	bp->stats.mac_frame_error_flag				= bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_flag;
+	bp->stats.mac_ma_unitdata_available			= bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_available;
+	bp->stats.mac_hardware_present				= bp->cmd_rsp_virt->smt_mib_get.mac_hardware_present;
+	bp->stats.mac_ma_unitdata_enable			= bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_enable;
+	bp->stats.path_tvx_lower_bound				= bp->cmd_rsp_virt->smt_mib_get.path_tvx_lower_bound;
+	bp->stats.path_t_max_lower_bound			= bp->cmd_rsp_virt->smt_mib_get.path_t_max_lower_bound;
+	bp->stats.path_max_t_req					= bp->cmd_rsp_virt->smt_mib_get.path_max_t_req;
+	memcpy(bp->stats.path_configuration, &bp->cmd_rsp_virt->smt_mib_get.path_configuration, sizeof(bp->cmd_rsp_virt->smt_mib_get.path_configuration));
+	bp->stats.port_my_type[0]					= bp->cmd_rsp_virt->smt_mib_get.port_my_type[0];
+	bp->stats.port_my_type[1]					= bp->cmd_rsp_virt->smt_mib_get.port_my_type[1];
+	bp->stats.port_neighbor_type[0]				= bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[0];
+	bp->stats.port_neighbor_type[1]				= bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[1];
+	bp->stats.port_connection_policies[0]		= bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[0];
+	bp->stats.port_connection_policies[1]		= bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[1];
+	bp->stats.port_mac_indicated[0]				= bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[0];
+	bp->stats.port_mac_indicated[1]				= bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[1];
+	bp->stats.port_current_path[0]				= bp->cmd_rsp_virt->smt_mib_get.port_current_path[0];
+	bp->stats.port_current_path[1]				= bp->cmd_rsp_virt->smt_mib_get.port_current_path[1];
+	memcpy(&bp->stats.port_requested_paths[0*3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[0], 3);
+	memcpy(&bp->stats.port_requested_paths[1*3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[1], 3);
+	bp->stats.port_mac_placement[0]				= bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[0];
+	bp->stats.port_mac_placement[1]				= bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[1];
+	bp->stats.port_available_paths[0]			= bp->cmd_rsp_virt->smt_mib_get.port_available_paths[0];
+	bp->stats.port_available_paths[1]			= bp->cmd_rsp_virt->smt_mib_get.port_available_paths[1];
+	bp->stats.port_pmd_class[0]					= bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[0];
+	bp->stats.port_pmd_class[1]					= bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[1];
+	bp->stats.port_connection_capabilities[0]	= bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[0];
+	bp->stats.port_connection_capabilities[1]	= bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[1];
+	bp->stats.port_bs_flag[0]					= bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[0];
+	bp->stats.port_bs_flag[1]					= bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[1];
+	bp->stats.port_ler_estimate[0]				= bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[0];
+	bp->stats.port_ler_estimate[1]				= bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[1];
+	bp->stats.port_ler_cutoff[0]				= bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[0];
+	bp->stats.port_ler_cutoff[1]				= bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[1];
+	bp->stats.port_ler_alarm[0]					= bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[0];
+	bp->stats.port_ler_alarm[1]					= bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[1];
+	bp->stats.port_connect_state[0]				= bp->cmd_rsp_virt->smt_mib_get.port_connect_state[0];
+	bp->stats.port_connect_state[1]				= bp->cmd_rsp_virt->smt_mib_get.port_connect_state[1];
+	bp->stats.port_pcm_state[0]					= bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[0];
+	bp->stats.port_pcm_state[1]					= bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[1];
+	bp->stats.port_pc_withhold[0]				= bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[0];
+	bp->stats.port_pc_withhold[1]				= bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[1];
+	bp->stats.port_ler_flag[0]					= bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[0];
+	bp->stats.port_ler_flag[1]					= bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[1];
+	bp->stats.port_hardware_present[0]			= bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[0];
+	bp->stats.port_hardware_present[1]			= bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[1];
+
+	/* Get FDDI counters */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_CNTRS_GET;
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		return((struct net_device_stats *) &bp->stats);
+
+	/* Fill the bp->stats structure with the FDDI counter values */
+
+	bp->stats.mac_frame_cts				= bp->cmd_rsp_virt->cntrs_get.cntrs.frame_cnt.ls;
+	bp->stats.mac_copied_cts			= bp->cmd_rsp_virt->cntrs_get.cntrs.copied_cnt.ls;
+	bp->stats.mac_transmit_cts			= bp->cmd_rsp_virt->cntrs_get.cntrs.transmit_cnt.ls;
+	bp->stats.mac_error_cts				= bp->cmd_rsp_virt->cntrs_get.cntrs.error_cnt.ls;
+	bp->stats.mac_lost_cts				= bp->cmd_rsp_virt->cntrs_get.cntrs.lost_cnt.ls;
+	bp->stats.port_lct_fail_cts[0]		= bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[0].ls;
+	bp->stats.port_lct_fail_cts[1]		= bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[1].ls;
+	bp->stats.port_lem_reject_cts[0]	= bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[0].ls;
+	bp->stats.port_lem_reject_cts[1]	= bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[1].ls;
+	bp->stats.port_lem_cts[0]			= bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[0].ls;
+	bp->stats.port_lem_cts[1]			= bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[1].ls;
+
+	return((struct net_device_stats *) &bp->stats);
+	}
+
+
+/*
+ * ==============================
+ * = dfx_ctl_set_multicast_list =
+ * ==============================
+ *   
+ * Overview:
+ *   Enable/Disable LLC frame promiscuous mode reception
+ *   on the adapter and/or update multicast address table.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   This routine follows a fairly simple algorithm for setting the
+ *   adapter filters and CAM:
+ *
+ *		if IFF_PROMISC flag is set
+ *			enable LLC individual/group promiscuous mode
+ *		else
+ *			disable LLC individual/group promiscuous mode
+ *			if number of incoming multicast addresses >
+ *					(CAM max size - number of unicast addresses in CAM)
+ *				enable LLC group promiscuous mode
+ *				set driver-maintained multicast address count to zero
+ *			else
+ *				disable LLC group promiscuous mode
+ *				set driver-maintained multicast address count to incoming count
+ *			update adapter CAM
+ *		update adapter filters
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   Multicast addresses are presented in canonical (LSB) format.
+ *
+ * Side Effects:
+ *   On-board adapter CAM and filters are updated.
+ */
+
+static void dfx_ctl_set_multicast_list(struct net_device *dev)
+	{
+	DFX_board_t			*bp = dev->priv;
+	int					i;			/* used as index in for loop */
+	struct dev_mc_list	*dmi;		/* ptr to multicast addr entry */
+
+	/* Enable LLC frame promiscuous mode, if necessary */
+
+	if (dev->flags & IFF_PROMISC)
+		bp->ind_group_prom = PI_FSTATE_K_PASS;		/* Enable LLC ind/group prom mode */
+
+	/* Else, update multicast address table */
+
+	else
+		{
+		bp->ind_group_prom = PI_FSTATE_K_BLOCK;		/* Disable LLC ind/group prom mode */
+		/*
+		 * Check whether incoming multicast address count exceeds table size
+		 *
+		 * Note: The adapters utilize an on-board 64 entry CAM for
+		 *       supporting perfect filtering of multicast packets
+		 *		 and bridge functions when adding unicast addresses.
+		 *		 There is no hash function available.  To support
+		 *		 additional multicast addresses, the all multicast
+		 *		 filter (LLC group promiscuous mode) must be enabled.
+		 *
+		 *		 The firmware reserves two CAM entries for SMT-related
+		 *		 multicast addresses, which leaves 62 entries available.
+		 *		 The following code ensures that we're not being asked
+		 *		 to add more than 62 addresses to the CAM.  If we are,
+		 *		 the driver will enable the all multicast filter.
+		 *		 Should the number of multicast addresses drop below
+		 *		 the high water mark, the filter will be disabled and
+		 *		 perfect filtering will be used.
+		 */
+
+		if (dev->mc_count > (PI_CMD_ADDR_FILTER_K_SIZE - bp->uc_count))
+			{
+			bp->group_prom	= PI_FSTATE_K_PASS;		/* Enable LLC group prom mode */
+			bp->mc_count	= 0;					/* Don't add mc addrs to CAM */
+			}
+		else
+			{
+			bp->group_prom	= PI_FSTATE_K_BLOCK;	/* Disable LLC group prom mode */
+			bp->mc_count	= dev->mc_count;		/* Add mc addrs to CAM */
+			}
+
+		/* Copy addresses to multicast address table, then update adapter CAM */
+
+		dmi = dev->mc_list;				/* point to first multicast addr */
+		for (i=0; i < bp->mc_count; i++)
+			{
+			memcpy(&bp->mc_table[i*FDDI_K_ALEN], dmi->dmi_addr, FDDI_K_ALEN);
+			dmi = dmi->next;			/* point to next multicast addr */
+			}
+		if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+			{
+			DBG_printk("%s: Could not update multicast address table!\n", dev->name);
+			}
+		else
+			{
+			DBG_printk("%s: Multicast address table updated!  Added %d addresses.\n", dev->name, bp->mc_count);
+			}
+		}
+
+	/* Update adapter filters */
+
+	if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+		{
+		DBG_printk("%s: Could not update adapter filters!\n", dev->name);
+		}
+	else
+		{
+		DBG_printk("%s: Adapter filters updated!\n", dev->name);
+		}
+	}
+
+
+/*
+ * ===========================
+ * = dfx_ctl_set_mac_address =
+ * ===========================
+ *   
+ * Overview:
+ *   Add node address override (unicast address) to adapter
+ *   CAM and update dev_addr field in device table.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   dev  - pointer to device information
+ *   addr - pointer to sockaddr structure containing unicast address to add
+ *
+ * Functional Description:
+ *   The adapter supports node address overrides by adding one or more
+ *   unicast addresses to the adapter CAM.  This is similar to adding
+ *   multicast addresses.  In this routine we'll update the driver and
+ *   device structures with the new address, then update the adapter CAM
+ *   to ensure that the adapter will copy and strip frames destined and
+ *   sourced by that address.
+ *
+ * Return Codes:
+ *   Always returns zero.
+ *
+ * Assumptions:
+ *   The address pointed to by addr->sa_data is a valid unicast
+ *   address and is presented in canonical (LSB) format.
+ *
+ * Side Effects:
+ *   On-board adapter CAM is updated.  On-board adapter filters
+ *   may be updated.
+ */
+
+static int dfx_ctl_set_mac_address(struct net_device *dev, void *addr)
+	{
+	DFX_board_t		*bp = dev->priv;
+	struct sockaddr	*p_sockaddr = (struct sockaddr *)addr;
+
+	/* Copy unicast address to driver-maintained structs and update count */
+
+	memcpy(dev->dev_addr, p_sockaddr->sa_data, FDDI_K_ALEN);	/* update device struct */
+	memcpy(&bp->uc_table[0], p_sockaddr->sa_data, FDDI_K_ALEN);	/* update driver struct */
+	bp->uc_count = 1;
+
+	/*
+	 * Verify we're not exceeding the CAM size by adding unicast address
+	 *
+	 * Note: It's possible that before entering this routine we've
+	 *       already filled the CAM with 62 multicast addresses.
+	 *		 Since we need to place the node address override into
+	 *		 the CAM, we have to check to see that we're not
+	 *		 exceeding the CAM size.  If we are, we have to enable
+	 *		 the LLC group (multicast) promiscuous mode filter as
+	 *		 in dfx_ctl_set_multicast_list.
+	 */
+
+	if ((bp->uc_count + bp->mc_count) > PI_CMD_ADDR_FILTER_K_SIZE)
+		{
+		bp->group_prom	= PI_FSTATE_K_PASS;		/* Enable LLC group prom mode */
+		bp->mc_count	= 0;					/* Don't add mc addrs to CAM */
+
+		/* Update adapter filters */
+
+		if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
+			{
+			DBG_printk("%s: Could not update adapter filters!\n", dev->name);
+			}
+		else
+			{
+			DBG_printk("%s: Adapter filters updated!\n", dev->name);
+			}
+		}
+
+	/* Update adapter CAM with new unicast address */
+
+	if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
+		{
+		DBG_printk("%s: Could not set new MAC address!\n", dev->name);
+		}
+	else
+		{
+		DBG_printk("%s: Adapter CAM updated with new MAC address\n", dev->name);
+		}
+	return(0);			/* always return zero */
+	}
+
+
+/*
+ * ======================
+ * = dfx_ctl_update_cam =
+ * ======================
+ *
+ * Overview:
+ *   Procedure to update adapter CAM (Content Addressable Memory)
+ *   with desired unicast and multicast address entries.
+ *
+ * Returns:
+ *   Condition code
+ *
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Updates adapter CAM with current contents of board structure
+ *   unicast and multicast address tables.  Since there are only 62
+ *   free entries in CAM, this routine ensures that the command
+ *   request buffer is not overrun.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS - Request succeeded
+ *   DFX_K_FAILURE - Request failed
+ *
+ * Assumptions:
+ *   All addresses being added (unicast and multicast) are in canonical
+ *   order.
+ *
+ * Side Effects:
+ *   On-board adapter CAM is updated.
+ */
+
+static int dfx_ctl_update_cam(DFX_board_t *bp)
+	{
+	int			i;				/* used as index */
+	PI_LAN_ADDR	*p_addr;		/* pointer to CAM entry */
+
+	/*
+	 * Fill in command request information
+	 *
+	 * Note: Even though both the unicast and multicast address
+	 *       table entries are stored as contiguous 6 byte entries,
+	 *		 the firmware address filter set command expects each
+	 *		 entry to be two longwords (8 bytes total).  We must be
+	 *		 careful to only copy the six bytes of each unicast and
+	 *		 multicast table entry into each command entry.  This
+	 *		 is also why we must first clear the entire command
+	 *		 request buffer.
+	 */
+
+	memset(bp->cmd_req_virt, 0, PI_CMD_REQ_K_SIZE_MAX);	/* first clear buffer */
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_ADDR_FILTER_SET;
+	p_addr = &bp->cmd_req_virt->addr_filter_set.entry[0];
+
+	/* Now add unicast addresses to command request buffer, if any */
+
+	for (i=0; i < (int)bp->uc_count; i++)
+		{
+		if (i < PI_CMD_ADDR_FILTER_K_SIZE)
+			{
+			memcpy(p_addr, &bp->uc_table[i*FDDI_K_ALEN], FDDI_K_ALEN);
+			p_addr++;			/* point to next command entry */
+			}
+		}
+
+	/* Now add multicast addresses to command request buffer, if any */
+
+	for (i=0; i < (int)bp->mc_count; i++)
+		{
+		if ((i + bp->uc_count) < PI_CMD_ADDR_FILTER_K_SIZE)
+			{
+			memcpy(p_addr, &bp->mc_table[i*FDDI_K_ALEN], FDDI_K_ALEN);
+			p_addr++;			/* point to next command entry */
+			}
+		}
+
+	/* Issue command to update adapter CAM, then return */
+
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		return(DFX_K_FAILURE);
+	return(DFX_K_SUCCESS);
+	}
+
+
+/*
+ * ==========================
+ * = dfx_ctl_update_filters =
+ * ==========================
+ *
+ * Overview:
+ *   Procedure to update adapter filters with desired
+ *   filter settings.
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Enables or disables filter using current filter settings.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS - Request succeeded.
+ *   DFX_K_FAILURE - Request failed.
+ *
+ * Assumptions:
+ *   We must always pass up packets destined to the broadcast
+ *   address (FF-FF-FF-FF-FF-FF), so we'll always keep the
+ *   broadcast filter enabled.
+ *
+ * Side Effects:
+ *   On-board adapter filters are updated.
+ */
+
+static int dfx_ctl_update_filters(DFX_board_t *bp)
+	{
+	int	i = 0;					/* used as index */
+
+	/* Fill in command request information */
+
+	bp->cmd_req_virt->cmd_type = PI_CMD_K_FILTERS_SET;
+
+	/* Initialize Broadcast filter - * ALWAYS ENABLED * */
+
+	bp->cmd_req_virt->filter_set.item[i].item_code	= PI_ITEM_K_BROADCAST;
+	bp->cmd_req_virt->filter_set.item[i++].value	= PI_FSTATE_K_PASS;
+
+	/* Initialize LLC Individual/Group Promiscuous filter */
+
+	bp->cmd_req_virt->filter_set.item[i].item_code	= PI_ITEM_K_IND_GROUP_PROM;
+	bp->cmd_req_virt->filter_set.item[i++].value	= bp->ind_group_prom;
+
+	/* Initialize LLC Group Promiscuous filter */
+
+	bp->cmd_req_virt->filter_set.item[i].item_code	= PI_ITEM_K_GROUP_PROM;
+	bp->cmd_req_virt->filter_set.item[i++].value	= bp->group_prom;
+
+	/* Terminate the item code list */
+
+	bp->cmd_req_virt->filter_set.item[i].item_code	= PI_ITEM_K_EOL;
+
+	/* Issue command to update adapter filters, then return */
+
+	if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
+		return(DFX_K_FAILURE);
+	return(DFX_K_SUCCESS);
+	}
+
+
+/*
+ * ======================
+ * = dfx_hw_dma_cmd_req =
+ * ======================
+ *   
+ * Overview:
+ *   Sends PDQ DMA command to adapter firmware
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   The command request and response buffers are posted to the adapter in the manner
+ *   described in the PDQ Port Specification:
+ *
+ *		1. Command Response Buffer is posted to adapter.
+ *		2. Command Request Buffer is posted to adapter.
+ *		3. Command Request consumer index is polled until it indicates that request
+ *         buffer has been DMA'd to adapter.
+ *		4. Command Response consumer index is polled until it indicates that response
+ *         buffer has been DMA'd from adapter.
+ *
+ *   This ordering ensures that a response buffer is already available for the firmware
+ *   to use once it's done processing the request buffer.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS	  - DMA command succeeded
+ * 	 DFX_K_OUTSTATE   - Adapter is NOT in proper state
+ *   DFX_K_HW_TIMEOUT - DMA command timed out
+ *
+ * Assumptions:
+ *   Command request buffer has already been filled with desired DMA command.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_hw_dma_cmd_req(DFX_board_t *bp)
+	{
+	int status;			/* adapter status */
+	int timeout_cnt;	/* used in for loops */
+	
+	/* Make sure the adapter is in a state that we can issue the DMA command in */
+	
+	status = dfx_hw_adap_state_rd(bp);
+	if ((status == PI_STATE_K_RESET)		||
+		(status == PI_STATE_K_HALTED)		||
+		(status == PI_STATE_K_DMA_UNAVAIL)	||
+		(status == PI_STATE_K_UPGRADE))
+		return(DFX_K_OUTSTATE);
+
+	/* Put response buffer on the command response queue */
+
+	bp->descr_block_virt->cmd_rsp[bp->cmd_rsp_reg.index.prod].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
+			((PI_CMD_RSP_K_SIZE_MAX / PI_ALIGN_K_CMD_RSP_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
+	bp->descr_block_virt->cmd_rsp[bp->cmd_rsp_reg.index.prod].long_1 = bp->cmd_rsp_phys;
+
+	/* Bump (and wrap) the producer index and write out to register */
+
+	bp->cmd_rsp_reg.index.prod += 1;
+	bp->cmd_rsp_reg.index.prod &= PI_CMD_RSP_K_NUM_ENTRIES-1;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_RSP_PROD, bp->cmd_rsp_reg.lword);
+
+	/* Put request buffer on the command request queue */
+	
+	bp->descr_block_virt->cmd_req[bp->cmd_req_reg.index.prod].long_0 = (u32) (PI_XMT_DESCR_M_SOP |
+			PI_XMT_DESCR_M_EOP | (PI_CMD_REQ_K_SIZE_MAX << PI_XMT_DESCR_V_SEG_LEN));
+	bp->descr_block_virt->cmd_req[bp->cmd_req_reg.index.prod].long_1 = bp->cmd_req_phys;
+
+	/* Bump (and wrap) the producer index and write out to register */
+
+	bp->cmd_req_reg.index.prod += 1;
+	bp->cmd_req_reg.index.prod &= PI_CMD_REQ_K_NUM_ENTRIES-1;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_REQ_PROD, bp->cmd_req_reg.lword);
+
+	/*
+	 * Here we wait for the command request consumer index to be equal
+	 * to the producer, indicating that the adapter has DMAed the request.
+	 */
+
+	for (timeout_cnt = 20000; timeout_cnt > 0; timeout_cnt--)
+		{
+		if (bp->cmd_req_reg.index.prod == (u8)(bp->cons_block_virt->cmd_req))
+			break;
+		udelay(100);			/* wait for 100 microseconds */
+		}
+	if (timeout_cnt == 0) 
+		return(DFX_K_HW_TIMEOUT);
+
+	/* Bump (and wrap) the completion index and write out to register */
+
+	bp->cmd_req_reg.index.comp += 1;
+	bp->cmd_req_reg.index.comp &= PI_CMD_REQ_K_NUM_ENTRIES-1;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_REQ_PROD, bp->cmd_req_reg.lword);
+
+	/*
+	 * Here we wait for the command response consumer index to be equal
+	 * to the producer, indicating that the adapter has DMAed the response.
+	 */
+
+	for (timeout_cnt = 20000; timeout_cnt > 0; timeout_cnt--)
+		{
+		if (bp->cmd_rsp_reg.index.prod == (u8)(bp->cons_block_virt->cmd_rsp))
+			break;
+		udelay(100);			/* wait for 100 microseconds */
+		}
+	if (timeout_cnt == 0) 
+		return(DFX_K_HW_TIMEOUT);
+
+	/* Bump (and wrap) the completion index and write out to register */
+
+	bp->cmd_rsp_reg.index.comp += 1;
+	bp->cmd_rsp_reg.index.comp &= PI_CMD_RSP_K_NUM_ENTRIES-1;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_RSP_PROD, bp->cmd_rsp_reg.lword);
+	return(DFX_K_SUCCESS);
+	}
+
+
+/*
+ * ========================
+ * = dfx_hw_port_ctrl_req =
+ * ========================
+ *   
+ * Overview:
+ *   Sends PDQ port control command to adapter firmware
+ *  
+ * Returns:
+ *   Host data register value in host_data if ptr is not NULL
+ *       
+ * Arguments:
+ *   bp			- pointer to board information
+ *	 command	- port control command
+ *	 data_a		- port data A register value
+ *	 data_b		- port data B register value
+ *	 host_data	- ptr to host data register value
+ *
+ * Functional Description:
+ *   Send generic port control command to adapter by writing
+ *   to various PDQ port registers, then polling for completion.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS	  - port control command succeeded
+ *   DFX_K_HW_TIMEOUT - port control command timed out
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_hw_port_ctrl_req(
+	DFX_board_t	*bp,
+	PI_UINT32	command,
+	PI_UINT32	data_a,
+	PI_UINT32	data_b,
+	PI_UINT32	*host_data
+	)
+
+	{
+	PI_UINT32	port_cmd;		/* Port Control command register value */
+	int			timeout_cnt;	/* used in for loops */
+
+	/* Set Command Error bit in command longword */
+	
+	port_cmd = (PI_UINT32) (command | PI_PCTRL_M_CMD_ERROR);
+
+	/* Issue port command to the adapter */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_A, data_a);
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_B, data_b);
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_CTRL, port_cmd);
+
+	/* Now wait for command to complete */
+
+	if (command == PI_PCTRL_M_BLAST_FLASH)
+		timeout_cnt = 600000;	/* set command timeout count to 60 seconds */
+	else
+		timeout_cnt = 20000;	/* set command timeout count to 2 seconds */
+
+	for (; timeout_cnt > 0; timeout_cnt--)
+		{
+		dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_CTRL, &port_cmd);
+		if (!(port_cmd & PI_PCTRL_M_CMD_ERROR))
+			break;
+		udelay(100);			/* wait for 100 microseconds */
+		}
+	if (timeout_cnt == 0) 
+		return(DFX_K_HW_TIMEOUT);
+
+	/*
+	 * If the address of host_data is non-zero, assume caller has supplied a  
+	 * non NULL pointer, and return the contents of the HOST_DATA register in 
+	 * it.
+	 */
+
+	if (host_data != NULL)
+		dfx_port_read_long(bp, PI_PDQ_K_REG_HOST_DATA, host_data);
+	return(DFX_K_SUCCESS);
+	}
+
+
+/*
+ * =====================
+ * = dfx_hw_adap_reset =
+ * =====================
+ *   
+ * Overview:
+ *   Resets adapter
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp   - pointer to board information
+ *   type - type of reset to perform
+ *
+ * Functional Description:
+ *   Issue soft reset to adapter by writing to PDQ Port Reset
+ *   register.  Use incoming reset type to tell adapter what
+ *   kind of reset operation to perform.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   This routine merely issues a soft reset to the adapter.
+ *   It is expected that after this routine returns, the caller
+ *   will appropriately poll the Port Status register for the
+ *   adapter to enter the proper state.
+ *
+ * Side Effects:
+ *   Internal adapter registers are cleared.
+ */
+
+static void dfx_hw_adap_reset(
+	DFX_board_t	*bp,
+	PI_UINT32	type
+	)
+
+	{
+	/* Set Reset type and assert reset */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_A, type);	/* tell adapter type of reset */
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_RESET, PI_RESET_M_ASSERT_RESET);
+
+	/* Wait for at least 1 Microsecond according to the spec. We wait 20 just to be safe */
+
+	udelay(20);
+
+	/* Deassert reset */
+
+	dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_RESET, 0);
+	}
+
+
+/*
+ * ========================
+ * = dfx_hw_adap_state_rd =
+ * ========================
+ *   
+ * Overview:
+ *   Returns current adapter state
+ *  
+ * Returns:
+ *   Adapter state per PDQ Port Specification
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Reads PDQ Port Status register and returns adapter state.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_hw_adap_state_rd(DFX_board_t *bp)
+	{
+	PI_UINT32 port_status;		/* Port Status register value */
+
+	dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
+	return((port_status & PI_PSTATUS_M_STATE) >> PI_PSTATUS_V_STATE);
+	}
+
+
+/*
+ * =====================
+ * = dfx_hw_dma_uninit =
+ * =====================
+ *   
+ * Overview:
+ *   Brings adapter to DMA_UNAVAILABLE state
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   bp   - pointer to board information
+ *   type - type of reset to perform
+ *
+ * Functional Description:
+ *   Bring adapter to DMA_UNAVAILABLE state by performing the following:
+ *		1. Set reset type bit in Port Data A Register then reset adapter.
+ *		2. Check that adapter is in DMA_UNAVAILABLE state.
+ *
+ * Return Codes:
+ *   DFX_K_SUCCESS	  - adapter is in DMA_UNAVAILABLE state
+ *   DFX_K_HW_TIMEOUT - adapter did not reset properly
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   Internal adapter registers are cleared.
+ */
+
+static int dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type)
+	{
+	int timeout_cnt;	/* used in for loops */
+
+	/* Set reset type bit and reset adapter */
+
+	dfx_hw_adap_reset(bp, type);
+
+	/* Now wait for adapter to enter DMA_UNAVAILABLE state */
+
+	for (timeout_cnt = 100000; timeout_cnt > 0; timeout_cnt--)
+		{
+		if (dfx_hw_adap_state_rd(bp) == PI_STATE_K_DMA_UNAVAIL)
+			break;
+		udelay(100);					/* wait for 100 microseconds */
+		}
+	if (timeout_cnt == 0) 
+		return(DFX_K_HW_TIMEOUT);
+	return(DFX_K_SUCCESS);
+	}
+
+/*
+ *	Align an sk_buff to a boundary power of 2
+ *
+ */
+ 
+static void my_skb_align(struct sk_buff *skb, int n)
+{
+	unsigned long x = (unsigned long)skb->data;
+	unsigned long v;
+	
+	v = ALIGN(x, n);	/* Where we want to be */
+	
+	skb_reserve(skb, v - x);
+}
+
+
+/*
+ * ================
+ * = dfx_rcv_init =
+ * ================
+ *   
+ * Overview:
+ *   Produces buffers to adapter LLC Host receive descriptor block
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *   get_buffers - non-zero if buffers to be allocated
+ *
+ * Functional Description:
+ *   This routine can be called during dfx_adap_init() or during an adapter
+ *	 reset.  It initializes the descriptor block and produces all allocated
+ *   LLC Host queue receive buffers.
+ *
+ * Return Codes:
+ *   Return 0 on success or -ENOMEM if buffer allocation failed (when using
+ *   dynamic buffer allocation). If the buffer allocation failed, the
+ *   already allocated buffers will not be released and the caller should do
+ *   this.
+ *
+ * Assumptions:
+ *   The PDQ has been reset and the adapter and driver maintained Type 2
+ *   register indices are cleared.
+ *
+ * Side Effects:
+ *   Receive buffers are posted to the adapter LLC queue and the adapter
+ *   is notified.
+ */
+
+static int dfx_rcv_init(DFX_board_t *bp, int get_buffers)
+	{
+	int	i, j;					/* used in for loop */
+
+	/*
+	 *  Since each receive buffer is a single fragment of same length, initialize
+	 *  first longword in each receive descriptor for entire LLC Host descriptor
+	 *  block.  Also initialize second longword in each receive descriptor with
+	 *  physical address of receive buffer.  We'll always allocate receive
+	 *  buffers in powers of 2 so that we can easily fill the 256 entry descriptor
+	 *  block and produce new receive buffers by simply updating the receive
+	 *  producer index.
+	 *
+	 * 	Assumptions:
+	 *		To support all shipping versions of PDQ, the receive buffer size
+	 *		must be mod 128 in length and the physical address must be 128 byte
+	 *		aligned.  In other words, bits 0-6 of the length and address must
+	 *		be zero for the following descriptor field entries to be correct on
+	 *		all PDQ-based boards.  We guaranteed both requirements during
+	 *		driver initialization when we allocated memory for the receive buffers.
+	 */
+
+	if (get_buffers) {
+#ifdef DYNAMIC_BUFFERS
+	for (i = 0; i < (int)(bp->rcv_bufs_to_post); i++)
+		for (j = 0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+		{
+			struct sk_buff *newskb = __dev_alloc_skb(NEW_SKB_SIZE, GFP_NOIO);
+			if (!newskb)
+				return -ENOMEM;
+			bp->descr_block_virt->rcv_data[i+j].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
+				((PI_RCV_DATA_K_SIZE_MAX / PI_ALIGN_K_RCV_DATA_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
+			/*
+			 * align to 128 bytes for compatibility with
+			 * the old EISA boards.
+			 */
+			 
+			my_skb_align(newskb, 128);
+			bp->descr_block_virt->rcv_data[i + j].long_1 =
+				(u32)pci_map_single(bp->pci_dev, newskb->data,
+						    NEW_SKB_SIZE,
+						    PCI_DMA_FROMDEVICE);
+			/*
+			 * p_rcv_buff_va is only used inside the
+			 * kernel so we put the skb pointer here.
+			 */
+			bp->p_rcv_buff_va[i+j] = (char *) newskb;
+		}
+#else
+	for (i=0; i < (int)(bp->rcv_bufs_to_post); i++)
+		for (j=0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+			{
+			bp->descr_block_virt->rcv_data[i+j].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
+				((PI_RCV_DATA_K_SIZE_MAX / PI_ALIGN_K_RCV_DATA_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
+			bp->descr_block_virt->rcv_data[i+j].long_1 = (u32) (bp->rcv_block_phys + (i * PI_RCV_DATA_K_SIZE_MAX));
+			bp->p_rcv_buff_va[i+j] = (char *) (bp->rcv_block_virt + (i * PI_RCV_DATA_K_SIZE_MAX));
+			}
+#endif
+	}
+
+	/* Update receive producer and Type 2 register */
+
+	bp->rcv_xmt_reg.index.rcv_prod = bp->rcv_bufs_to_post;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+	return 0;
+	}
+
+
+/*
+ * =========================
+ * = dfx_rcv_queue_process =
+ * =========================
+ *   
+ * Overview:
+ *   Process received LLC frames.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Received LLC frames are processed until there are no more consumed frames.
+ *   Once all frames are processed, the receive buffers are returned to the
+ *   adapter.  Note that this algorithm fixes the length of time that can be spent
+ *   in this routine, because there are a fixed number of receive buffers to
+ *   process and buffers are not produced until this routine exits and returns
+ *   to the ISR.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+
+static void dfx_rcv_queue_process(
+	DFX_board_t *bp
+	)
+
+	{
+	PI_TYPE_2_CONSUMER	*p_type_2_cons;		/* ptr to rcv/xmt consumer block register */
+	char				*p_buff;			/* ptr to start of packet receive buffer (FMC descriptor) */
+	u32					descr, pkt_len;		/* FMC descriptor field and packet length */
+	struct sk_buff		*skb;				/* pointer to a sk_buff to hold incoming packet data */
+
+	/* Service all consumed LLC receive frames */
+
+	p_type_2_cons = (PI_TYPE_2_CONSUMER *)(&bp->cons_block_virt->xmt_rcv_data);
+	while (bp->rcv_xmt_reg.index.rcv_comp != p_type_2_cons->index.rcv_cons)
+		{
+		/* Process any errors */
+
+		int entry;
+
+		entry = bp->rcv_xmt_reg.index.rcv_comp;
+#ifdef DYNAMIC_BUFFERS
+		p_buff = (char *) (((struct sk_buff *)bp->p_rcv_buff_va[entry])->data);
+#else
+		p_buff = (char *) bp->p_rcv_buff_va[entry];
+#endif
+		memcpy(&descr, p_buff + RCV_BUFF_K_DESCR, sizeof(u32));
+
+		if (descr & PI_FMC_DESCR_M_RCC_FLUSH)
+			{
+			if (descr & PI_FMC_DESCR_M_RCC_CRC)
+				bp->rcv_crc_errors++;
+			else
+				bp->rcv_frame_status_errors++;
+			}
+		else
+		{
+			int rx_in_place = 0;
+
+			/* The frame was received without errors - verify packet length */
+
+			pkt_len = (u32)((descr & PI_FMC_DESCR_M_LEN) >> PI_FMC_DESCR_V_LEN);
+			pkt_len -= 4;				/* subtract 4 byte CRC */
+			if (!IN_RANGE(pkt_len, FDDI_K_LLC_ZLEN, FDDI_K_LLC_LEN))
+				bp->rcv_length_errors++;
+			else{
+#ifdef DYNAMIC_BUFFERS
+				if (pkt_len > SKBUFF_RX_COPYBREAK) {
+					struct sk_buff *newskb;
+
+					newskb = dev_alloc_skb(NEW_SKB_SIZE);
+					if (newskb){
+						rx_in_place = 1;
+						
+						my_skb_align(newskb, 128);
+						skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
+						pci_unmap_single(bp->pci_dev,
+							bp->descr_block_virt->rcv_data[entry].long_1,
+							NEW_SKB_SIZE,
+							PCI_DMA_FROMDEVICE);
+						skb_reserve(skb, RCV_BUFF_K_PADDING);
+						bp->p_rcv_buff_va[entry] = (char *)newskb;
+						bp->descr_block_virt->rcv_data[entry].long_1 =
+							(u32)pci_map_single(bp->pci_dev,
+								newskb->data,
+								NEW_SKB_SIZE,
+								PCI_DMA_FROMDEVICE);
+					} else
+						skb = NULL;
+				} else
+#endif
+					skb = dev_alloc_skb(pkt_len+3);	/* alloc new buffer to pass up, add room for PRH */
+				if (skb == NULL)
+					{
+					printk("%s: Could not allocate receive buffer.  Dropping packet.\n", bp->dev->name);
+					bp->rcv_discards++;
+					break;
+					}
+				else {
+#ifndef DYNAMIC_BUFFERS
+					if (! rx_in_place)
+#endif
+					{
+						/* Receive buffer allocated, pass receive packet up */
+
+						memcpy(skb->data, p_buff + RCV_BUFF_K_PADDING, pkt_len+3);
+					}
+					
+					skb_reserve(skb,3);		/* adjust data field so that it points to FC byte */
+					skb_put(skb, pkt_len);		/* pass up packet length, NOT including CRC */
+					skb->dev = bp->dev;		/* pass up device pointer */
+
+					skb->protocol = fddi_type_trans(skb, bp->dev);
+					bp->rcv_total_bytes += skb->len;
+					netif_rx(skb);
+
+					/* Update the rcv counters */
+					bp->dev->last_rx = jiffies;
+					bp->rcv_total_frames++;
+					if (*(p_buff + RCV_BUFF_K_DA) & 0x01)
+						bp->rcv_multicast_frames++;
+				}
+			}
+			}
+
+		/*
+		 * Advance the producer (for recycling) and advance the completion
+		 * (for servicing received frames).  Note that it is okay to
+		 * advance the producer without checking that it passes the
+		 * completion index because they are both advanced at the same
+		 * rate.
+		 */
+
+		bp->rcv_xmt_reg.index.rcv_prod += 1;
+		bp->rcv_xmt_reg.index.rcv_comp += 1;
+		}
+	}
+
+
+/*
+ * =====================
+ * = dfx_xmt_queue_pkt =
+ * =====================
+ *   
+ * Overview:
+ *   Queues packets for transmission
+ *  
+ * Returns:
+ *   Condition code
+ *       
+ * Arguments:
+ *   skb - pointer to sk_buff to queue for transmission
+ *   dev - pointer to device information
+ *
+ * Functional Description:
+ *   Here we assume that an incoming skb transmit request
+ *   is contained in a single physically contiguous buffer
+ *   in which the virtual address of the start of packet
+ *   (skb->data) can be converted to a physical address
+ *   by using pci_map_single().
+ *
+ *   Since the adapter architecture requires a three byte
+ *   packet request header to prepend the start of packet,
+ *   we'll write the three byte field immediately prior to
+ *   the FC byte.  This assumption is valid because we've
+ *   ensured that dev->hard_header_len includes three pad
+ *   bytes.  By posting a single fragment to the adapter,
+ *   we'll reduce the number of descriptor fetches and
+ *   bus traffic needed to send the request.
+ *
+ *   Also, we can't free the skb until after it's been DMA'd
+ *   out by the adapter, so we'll queue it in the driver and
+ *   return it in dfx_xmt_done.
+ *
+ * Return Codes:
+ *   0 - driver queued packet, link is unavailable, or skbuff was bad
+ *	 1 - caller should requeue the sk_buff for later transmission
+ *
+ * Assumptions:
+ *	 First and foremost, we assume the incoming skb pointer
+ *   is NOT NULL and is pointing to a valid sk_buff structure.
+ *
+ *   The outgoing packet is complete, starting with the
+ *   frame control byte including the last byte of data,
+ *   but NOT including the 4 byte CRC.  We'll let the
+ *   adapter hardware generate and append the CRC.
+ *
+ *   The entire packet is stored in one physically
+ *   contiguous buffer which is not cached and whose
+ *   32-bit physical address can be determined.
+ *
+ *   It's vital that this routine is NOT reentered for the
+ *   same board and that the OS is not in another section of
+ *   code (eg. dfx_int_common) for the same board on a
+ *   different thread.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_xmt_queue_pkt(
+	struct sk_buff	*skb,
+	struct net_device	*dev
+	)
+
+	{
+	DFX_board_t		*bp = dev->priv;
+	u8			prod;				/* local transmit producer index */
+	PI_XMT_DESCR		*p_xmt_descr;		/* ptr to transmit descriptor block entry */
+	XMT_DRIVER_DESCR	*p_xmt_drv_descr;	/* ptr to transmit driver descriptor */
+	unsigned long		flags;
+
+	netif_stop_queue(dev);
+	
+	/*
+	 * Verify that incoming transmit request is OK
+	 *
+	 * Note: The packet size check is consistent with other
+	 *		 Linux device drivers, although the correct packet
+	 *		 size should be verified before calling the
+	 *		 transmit routine.
+	 */
+
+	if (!IN_RANGE(skb->len, FDDI_K_LLC_ZLEN, FDDI_K_LLC_LEN))
+	{
+		printk("%s: Invalid packet length - %u bytes\n", 
+			dev->name, skb->len);
+		bp->xmt_length_errors++;		/* bump error counter */
+		netif_wake_queue(dev);
+		dev_kfree_skb(skb);
+		return(0);				/* return "success" */
+	}
+	/*
+	 * See if adapter link is available, if not, free buffer
+	 *
+	 * Note: If the link isn't available, free buffer and return 0
+	 *		 rather than tell the upper layer to requeue the packet.
+	 *		 The methodology here is that by the time the link
+	 *		 becomes available, the packet to be sent will be
+	 *		 fairly stale.  By simply dropping the packet, the
+	 *		 higher layer protocols will eventually time out
+	 *		 waiting for response packets which it won't receive.
+	 */
+
+	if (bp->link_available == PI_K_FALSE)
+		{
+		if (dfx_hw_adap_state_rd(bp) == PI_STATE_K_LINK_AVAIL)	/* is link really available? */
+			bp->link_available = PI_K_TRUE;		/* if so, set flag and continue */
+		else
+			{
+			bp->xmt_discards++;					/* bump error counter */
+			dev_kfree_skb(skb);		/* free sk_buff now */
+			netif_wake_queue(dev);
+			return(0);							/* return "success" */
+			}
+		}
+
+	spin_lock_irqsave(&bp->lock, flags);
+	
+	/* Get the current producer and the next free xmt data descriptor */
+
+	prod		= bp->rcv_xmt_reg.index.xmt_prod;
+	p_xmt_descr = &(bp->descr_block_virt->xmt_data[prod]);
+
+	/*
+	 * Get pointer to auxiliary queue entry to contain information
+	 * for this packet.
+	 *
+	 * Note: The current xmt producer index will become the
+	 *	 current xmt completion index when we complete this
+	 *	 packet later on.  So, we'll get the pointer to the
+	 *	 next auxiliary queue entry now before we bump the
+	 *	 producer index.
+	 */
+
+	p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[prod++]);	/* also bump producer index */
+
+	/* Write the three PRH bytes immediately before the FC byte */
+
+	skb_push(skb,3);
+	skb->data[0] = DFX_PRH0_BYTE;	/* these byte values are defined */
+	skb->data[1] = DFX_PRH1_BYTE;	/* in the Motorola FDDI MAC chip */
+	skb->data[2] = DFX_PRH2_BYTE;	/* specification */
+
+	/*
+	 * Write the descriptor with buffer info and bump producer
+	 *
+	 * Note: Since we need to start DMA from the packet request
+	 *		 header, we'll add 3 bytes to the DMA buffer length,
+	 *		 and we'll determine the physical address of the
+	 *		 buffer from the PRH, not skb->data.
+	 *
+	 * Assumptions:
+	 *		 1. Packet starts with the frame control (FC) byte
+	 *		    at skb->data.
+	 *		 2. The 4-byte CRC is not appended to the buffer or
+	 *			included in the length.
+	 *		 3. Packet length (skb->len) is from FC to end of
+	 *			data, inclusive.
+	 *		 4. The packet length does not exceed the maximum
+	 *			FDDI LLC frame length of 4491 bytes.
+	 *		 5. The entire packet is contained in a physically
+	 *			contiguous, non-cached, locked memory space
+	 *			comprised of a single buffer pointed to by
+	 *			skb->data.
+	 *		 6. The physical address of the start of packet
+	 *			can be determined from the virtual address
+	 *			by using pci_map_single() and is only 32-bits
+	 *			wide.
+	 */
+
+	p_xmt_descr->long_0	= (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN));
+	p_xmt_descr->long_1 = (u32)pci_map_single(bp->pci_dev, skb->data,
+						  skb->len, PCI_DMA_TODEVICE);
+
+	/*
+	 * Verify that descriptor is actually available
+	 *
+	 * Note: If descriptor isn't available, return 1 which tells
+	 *	 the upper layer to requeue the packet for later
+	 *	 transmission.
+	 *
+	 *       We need to ensure that the producer never reaches the
+	 *	 completion, except to indicate that the queue is empty.
+	 */
+
+	if (prod == bp->rcv_xmt_reg.index.xmt_comp)
+	{
+		skb_pull(skb,3);
+		spin_unlock_irqrestore(&bp->lock, flags);
+		return(1);			/* requeue packet for later */
+	}
+
+	/*
+	 * Save info for this packet for xmt done indication routine
+	 *
+	 * Normally, we'd save the producer index in the p_xmt_drv_descr
+	 * structure so that we'd have it handy when we complete this
+	 * packet later (in dfx_xmt_done).  However, since the current
+	 * transmit architecture guarantees a single fragment for the
+	 * entire packet, we can simply bump the completion index by
+	 * one (1) for each completed packet.
+	 *
+	 * Note: If this assumption changes and we're presented with
+	 *	 an inconsistent number of transmit fragments for packet
+	 *	 data, we'll need to modify this code to save the current
+	 *	 transmit producer index.
+	 */
+
+	p_xmt_drv_descr->p_skb = skb;
+
+	/* Update Type 2 register */
+
+	bp->rcv_xmt_reg.index.xmt_prod = prod;
+	dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
+	spin_unlock_irqrestore(&bp->lock, flags);
+	netif_wake_queue(dev);
+	return(0);							/* packet queued to adapter */
+	}
+
+
+/*
+ * ================
+ * = dfx_xmt_done =
+ * ================
+ *   
+ * Overview:
+ *   Processes all frames that have been transmitted.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   For all consumed transmit descriptors that have not
+ *   yet been completed, we'll free the skb we were holding
+ *   onto using dev_kfree_skb and bump the appropriate
+ *   counters.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   The Type 2 register is not updated in this routine.  It is
+ *   assumed that it will be updated in the ISR when dfx_xmt_done
+ *   returns.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static int dfx_xmt_done(DFX_board_t *bp)
+	{
+	XMT_DRIVER_DESCR	*p_xmt_drv_descr;	/* ptr to transmit driver descriptor */
+	PI_TYPE_2_CONSUMER	*p_type_2_cons;		/* ptr to rcv/xmt consumer block register */
+	u8			comp;			/* local transmit completion index */
+	int 			freed = 0;		/* buffers freed */
+
+	/* Service all consumed transmit frames */
+
+	p_type_2_cons = (PI_TYPE_2_CONSUMER *)(&bp->cons_block_virt->xmt_rcv_data);
+	while (bp->rcv_xmt_reg.index.xmt_comp != p_type_2_cons->index.xmt_cons)
+		{
+		/* Get pointer to the transmit driver descriptor block information */
+
+		p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
+
+		/* Increment transmit counters */
+
+		bp->xmt_total_frames++;
+		bp->xmt_total_bytes += p_xmt_drv_descr->p_skb->len;
+
+		/* Return skb to operating system */
+		comp = bp->rcv_xmt_reg.index.xmt_comp;
+		pci_unmap_single(bp->pci_dev,
+				 bp->descr_block_virt->xmt_data[comp].long_1,
+				 p_xmt_drv_descr->p_skb->len,
+				 PCI_DMA_TODEVICE);
+		dev_kfree_skb_irq(p_xmt_drv_descr->p_skb);
+
+		/*
+		 * Move to start of next packet by updating completion index
+		 *
+		 * Here we assume that a transmit packet request is always
+		 * serviced by posting one fragment.  We can therefore
+		 * simplify the completion code by incrementing the
+		 * completion index by one.  This code will need to be
+		 * modified if this assumption changes.  See comments
+		 * in dfx_xmt_queue_pkt for more details.
+		 */
+
+		bp->rcv_xmt_reg.index.xmt_comp += 1;
+		freed++;
+		}
+	return freed;
+	}
+
+
+/*
+ * =================
+ * = dfx_rcv_flush =
+ * =================
+ *   
+ * Overview:
+ *   Remove all skb's in the receive ring.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   Free's all the dynamically allocated skb's that are
+ *   currently attached to the device receive ring. This
+ *   function is typically only used when the device is
+ *   initialized or reinitialized.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Side Effects:
+ *   None
+ */
+#ifdef DYNAMIC_BUFFERS
+static void dfx_rcv_flush( DFX_board_t *bp )
+	{
+	int i, j;
+
+	for (i = 0; i < (int)(bp->rcv_bufs_to_post); i++)
+		for (j = 0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
+		{
+			struct sk_buff *skb;
+			skb = (struct sk_buff *)bp->p_rcv_buff_va[i+j];
+			if (skb)
+				dev_kfree_skb(skb);
+			bp->p_rcv_buff_va[i+j] = NULL;
+		}
+
+	}
+#else
+static inline void dfx_rcv_flush( DFX_board_t *bp )
+{
+}
+#endif /* DYNAMIC_BUFFERS */
+
+/*
+ * =================
+ * = dfx_xmt_flush =
+ * =================
+ *   
+ * Overview:
+ *   Processes all frames whether they've been transmitted
+ *   or not.
+ *  
+ * Returns:
+ *   None
+ *       
+ * Arguments:
+ *   bp - pointer to board information
+ *
+ * Functional Description:
+ *   For all produced transmit descriptors that have not
+ *   yet been completed, we'll free the skb we were holding
+ *   onto using dev_kfree_skb and bump the appropriate
+ *   counters.  Of course, it's possible that some of
+ *   these transmit requests actually did go out, but we
+ *   won't make that distinction here.  Finally, we'll
+ *   update the consumer index to match the producer.
+ *
+ * Return Codes:
+ *   None
+ *
+ * Assumptions:
+ *   This routine does NOT update the Type 2 register.  It
+ *   is assumed that this routine is being called during a
+ *   transmit flush interrupt, or a shutdown or close routine.
+ *
+ * Side Effects:
+ *   None
+ */
+
+static void dfx_xmt_flush( DFX_board_t *bp )
+	{
+	u32			prod_cons;		/* rcv/xmt consumer block longword */
+	XMT_DRIVER_DESCR	*p_xmt_drv_descr;	/* ptr to transmit driver descriptor */
+	u8			comp;			/* local transmit completion index */
+
+	/* Flush all outstanding transmit frames */
+
+	while (bp->rcv_xmt_reg.index.xmt_comp != bp->rcv_xmt_reg.index.xmt_prod)
+		{
+		/* Get pointer to the transmit driver descriptor block information */
+
+		p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
+
+		/* Return skb to operating system */
+		comp = bp->rcv_xmt_reg.index.xmt_comp;
+		pci_unmap_single(bp->pci_dev,
+				 bp->descr_block_virt->xmt_data[comp].long_1,
+				 p_xmt_drv_descr->p_skb->len,
+				 PCI_DMA_TODEVICE);
+		dev_kfree_skb(p_xmt_drv_descr->p_skb);
+
+		/* Increment transmit error counter */
+
+		bp->xmt_discards++;
+
+		/*
+		 * Move to start of next packet by updating completion index
+		 *
+		 * Here we assume that a transmit packet request is always
+		 * serviced by posting one fragment.  We can therefore
+		 * simplify the completion code by incrementing the
+		 * completion index by one.  This code will need to be
+		 * modified if this assumption changes.  See comments
+		 * in dfx_xmt_queue_pkt for more details.
+		 */
+
+		bp->rcv_xmt_reg.index.xmt_comp += 1;
+		}
+
+	/* Update the transmit consumer index in the consumer block */
+
+	prod_cons = (u32)(bp->cons_block_virt->xmt_rcv_data & ~PI_CONS_M_XMT_INDEX);
+	prod_cons |= (u32)(bp->rcv_xmt_reg.index.xmt_prod << PI_CONS_V_XMT_INDEX);
+	bp->cons_block_virt->xmt_rcv_data = prod_cons;
+	}
+
+static void __devexit dfx_remove_one_pci_or_eisa(struct pci_dev *pdev, struct net_device *dev)
+{
+	DFX_board_t	*bp = dev->priv;
+	int		alloc_size;		/* total buffer size used */
+
+	unregister_netdev(dev);
+	release_region(dev->base_addr,  pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN );
+
+	alloc_size = sizeof(PI_DESCR_BLOCK) +
+		     PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+		     (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+		     sizeof(PI_CONSUMER_BLOCK) +
+		     (PI_ALIGN_K_DESC_BLK - 1);
+	if (bp->kmalloced)
+		pci_free_consistent(pdev, alloc_size, bp->kmalloced,
+				    bp->kmalloced_dma);
+	free_netdev(dev);
+}
+
+static void __devexit dfx_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	dfx_remove_one_pci_or_eisa(pdev, dev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_device_id dfx_pci_tbl[] = {
+	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI, PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, dfx_pci_tbl);
+
+static struct pci_driver dfx_driver = {
+	.name		= "defxx",
+	.probe		= dfx_init_one,
+	.remove		= __devexit_p(dfx_remove_one),
+	.id_table	= dfx_pci_tbl,
+};
+
+static int dfx_have_pci;
+static int dfx_have_eisa;
+
+
+static void __exit dfx_eisa_cleanup(void)
+{
+	struct net_device *dev = root_dfx_eisa_dev;
+
+	while (dev)
+	{
+		struct net_device *tmp;
+		DFX_board_t *bp;
+
+		bp = (DFX_board_t*)dev->priv;
+		tmp = bp->next;
+		dfx_remove_one_pci_or_eisa(NULL, dev);
+		dev = tmp;
+	}
+}
+
+static int __init dfx_init(void)
+{
+	int rc_pci, rc_eisa;
+
+	rc_pci = pci_module_init(&dfx_driver);
+	if (rc_pci >= 0) dfx_have_pci = 1;
+	
+	rc_eisa = dfx_eisa_init();
+	if (rc_eisa >= 0) dfx_have_eisa = 1;
+
+	return ((rc_eisa < 0) ? 0 : rc_eisa)  + ((rc_pci < 0) ? 0 : rc_pci); 
+}
+
+static void __exit dfx_cleanup(void)
+{
+	if (dfx_have_pci)
+		pci_unregister_driver(&dfx_driver);
+	if (dfx_have_eisa)
+		dfx_eisa_cleanup();
+		
+}	
+
+module_init(dfx_init);
+module_exit(dfx_cleanup);
+MODULE_AUTHOR("Lawrence V. Stefani");
+MODULE_DESCRIPTION("DEC FDDIcontroller EISA/PCI (DEFEA/DEFPA) driver "
+		   DRV_VERSION " " DRV_RELDATE);
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Local variables:
+ * kernel-compile-command: "gcc -D__KERNEL__ -I/root/linux/include -Wall -Wstrict-prototypes -O2 -pipe -fomit-frame-pointer -fno-strength-reduce -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -c defxx.c"
+ * End:
+ */