[netdrvr] Use dev_printk() when ethernet interface isn't available

For messages prior to register_netdev(), prefer dev_printk() because
that prints out both our driver name and our [PCI | whatever] bus id.

Updates: 8139{cp,too}, b44, bnx2, cassini, {eepro,epic}100, fealnx,
	 hamachi, ne2k-pci, ns83820, pci-skeleton, r8169.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 25 insertions, 16 deletions

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 717506b2b13a..5e9ef52a5ca9 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -768,7 +768,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	/* dev and priv zeroed in alloc_etherdev */
 	dev = alloc_etherdev (sizeof (*tp));
 	if (dev == NULL) {
-		printk (KERN_ERR PFX "%s: Unable to alloc new net device\n", pci_name(pdev));
+		dev_printk (KERN_ERR, &pdev->dev,
+			    "Unable to alloc new net device\n");
 		return -ENOMEM;
 	}
 	SET_MODULE_OWNER(dev);
@@ -800,31 +801,35 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 #ifdef USE_IO_OPS
 	/* make sure PCI base addr 0 is PIO */
 	if (!(pio_flags & IORESOURCE_IO)) {
-		printk (KERN_ERR PFX "%s: region #0 not a PIO resource, aborting\n", pci_name(pdev));
+		dev_printk (KERN_ERR, &pdev->dev,
+			    "region #0 not a PIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 	/* check for weird/broken PCI region reporting */
 	if (pio_len < RTL_MIN_IO_SIZE) {
-		printk (KERN_ERR PFX "%s: Invalid PCI I/O region size(s), aborting\n", pci_name(pdev));
+		dev_printk (KERN_ERR, &pdev->dev,
+			    "Invalid PCI I/O region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 #else
 	/* make sure PCI base addr 1 is MMIO */
 	if (!(mmio_flags & IORESOURCE_MEM)) {
-		printk (KERN_ERR PFX "%s: region #1 not an MMIO resource, aborting\n", pci_name(pdev));
+		dev_printk (KERN_ERR, &pdev->dev,
+			    "region #1 not an MMIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 	if (mmio_len < RTL_MIN_IO_SIZE) {
-		printk (KERN_ERR PFX "%s: Invalid PCI mem region size(s), aborting\n", pci_name(pdev));
+		dev_printk (KERN_ERR, &pdev->dev,
+			    "Invalid PCI mem region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 #endif
 
-	rc = pci_request_regions (pdev, "8139too");
+	rc = pci_request_regions (pdev, DRV_NAME);
 	if (rc)
 		goto err_out;
 	disable_dev_on_err = 1;
@@ -835,7 +840,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 #ifdef USE_IO_OPS
 	ioaddr = ioport_map(pio_start, pio_len);
 	if (!ioaddr) {
-		printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev));
+		dev_printk (KERN_ERR, &pdev->dev, "cannot map PIO, aborting\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -846,7 +851,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	/* ioremap MMIO region */
 	ioaddr = pci_iomap(pdev, 1, 0);
 	if (ioaddr == NULL) {
-		printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev));
+		dev_printk (KERN_ERR, &pdev->dev,
+			    "cannot remap MMIO, aborting\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -860,8 +866,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 
 	/* check for missing/broken hardware */
 	if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
-		printk (KERN_ERR PFX "%s: Chip not responding, ignoring board\n",
-			pci_name(pdev));
+		dev_printk (KERN_ERR, &pdev->dev,
+			    "Chip not responding, ignoring board\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -875,9 +881,10 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 		}
 
 	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
-	printk (KERN_DEBUG PFX "%s: unknown chip version, assuming RTL-8139\n",
-		pci_name(pdev));
-	printk (KERN_DEBUG PFX "%s: TxConfig = 0x%lx\n", pci_name(pdev), RTL_R32 (TxConfig));
+	dev_printk (KERN_DEBUG, &pdev->dev,
+		    "unknown chip version, assuming RTL-8139\n");
+	dev_printk (KERN_DEBUG, &pdev->dev,
+		    "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
 	tp->chipset = 0;
 
 match:
@@ -954,9 +961,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
-		printk(KERN_INFO PFX "pci dev %s (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
-		       pci_name(pdev), pdev->vendor, pdev->device, pci_rev);
-		printk(KERN_INFO PFX "Use the \"8139cp\" driver for improved performance and stability.\n");
+		dev_printk(KERN_INFO, &pdev->dev,
+			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
+		       	   pdev->vendor, pdev->device, pci_rev);
+		dev_printk(KERN_INFO, &pdev->dev,
+			   "Use the \"8139cp\" driver for improved performance and stability.\n");
 	}
 
 	i = rtl8139_init_board (pdev, &dev);