Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (69 commits)
  Revert "[MTD] m25p80.c code cleanup"
  [MTD] [NAND] GPIO driver depends on ARM... for now.
  [MTD] [NAND] sh_flctl: fix compile error
  [MTD] [NOR] AT49BV6416 has swapped erase regions
  [MTD] [NAND] GPIO NAND flash driver
  [MTD] cmdlineparts documentation change - explain where mtd-id comes from
  [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection
  [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c
  [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash
  [MTD] mtdoops: Fix a bug where block may not be erased
  [MTD] mtdoops: Add a magic number to logged kernel oops
  [MTD] mtdoops: Fix an off by one error
  [JFFS2] Correct parameter names of jffs2_compress() in comments
  [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL
  [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written
  [MTD] [MAPS] Remove unused variable after ROM API cleanup.
  [MTD] m25p80.c extended jedec support (v2)
  [MTD] remove unused mtd parameter in of_mtd_parse_partitions()
  [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE
  [MTD] [NAND] driver extension to support NAND on TQM85xx modules
  ...

14 files changed, 2932 insertions, 499 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 41f361c49b32..1c2e9450d663 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -56,6 +56,12 @@ config MTD_NAND_H1900
 	help
 	  This enables the driver for the iPAQ h1900 flash.
 
+config MTD_NAND_GPIO
+	tristate "GPIO NAND Flash driver"
+	depends on GENERIC_GPIO && ARM
+	help
+	  This enables a GPIO based NAND flash driver.
+
 config MTD_NAND_SPIA
 	tristate "NAND Flash device on SPIA board"
 	depends on ARCH_P720T
@@ -68,12 +74,6 @@ config MTD_NAND_AMS_DELTA
 	help
 	  Support for NAND flash on Amstrad E3 (Delta).
 
-config MTD_NAND_TOTO
-	tristate "NAND Flash device on TOTO board"
-	depends on ARCH_OMAP && BROKEN
-	help
-	  Support for NAND flash on Texas Instruments Toto platform.
-
 config MTD_NAND_TS7250
 	tristate "NAND Flash device on TS-7250 board"
 	depends on MACH_TS72XX
@@ -163,13 +163,6 @@ config MTD_NAND_S3C2410_HWECC
 	  incorrect ECC generation, and if using these, the default of
 	  software ECC is preferable.
 
-config MTD_NAND_NDFC
-	tristate "NDFC NanD Flash Controller"
-	depends on 4xx && !PPC_MERGE
-	select MTD_NAND_ECC_SMC
-	help
-	 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
-
 config MTD_NAND_S3C2410_CLKSTOP
 	bool "S3C2410 NAND IDLE clock stop"
 	depends on MTD_NAND_S3C2410
@@ -340,6 +333,13 @@ config MTD_NAND_PXA3xx
 	  This enables the driver for the NAND flash device found on
 	  PXA3xx processors
 
+config MTD_NAND_PXA3xx_BUILTIN
+	bool "Use builtin definitions for some NAND chips (deprecated)"
+	depends on MTD_NAND_PXA3xx
+	help
+	  This enables builtin definitions for some NAND chips. This
+	  is deprecated in favor of platform specific data.
+
 config MTD_NAND_CM_X270
 	tristate "Support for NAND Flash on CM-X270 modules"
 	depends on MTD_NAND && MACH_ARMCORE
@@ -400,10 +400,24 @@ config MTD_NAND_FSL_ELBC
 
 config MTD_NAND_FSL_UPM
 	tristate "Support for NAND on Freescale UPM"
-	depends on MTD_NAND && OF_GPIO && (PPC_83xx || PPC_85xx)
+	depends on MTD_NAND && (PPC_83xx || PPC_85xx)
 	select FSL_LBC
 	help
 	  Enables support for NAND Flash chips wired onto Freescale PowerPC
 	  processor localbus with User-Programmable Machine support.
 
+config MTD_NAND_MXC
+	tristate "MXC NAND support"
+	depends on ARCH_MX2
+	help
+	  This enables the driver for the NAND flash controller on the
+	  MXC processors.
+
+config MTD_NAND_SH_FLCTL
+	tristate "Support for NAND on Renesas SuperH FLCTL"
+	depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
+	help
+	  Several Renesas SuperH CPU has FLCTL. This option enables support
+	  for NAND Flash using FLCTL. This driver support SH7723.
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index b786c5da82da..b661586afbfc 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
 obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
 obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
 obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
-obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
 obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
 obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
@@ -24,6 +23,7 @@ obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
+obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
@@ -34,5 +34,7 @@ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
 obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_UPM)		+= fsl_upm.o
+obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
+obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 3387e0d5076b..c98c1570a40b 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -174,48 +174,6 @@ static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
 }
 
 /*
- * write oob for small pages
- */
-static int atmel_nand_write_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip, int page)
-{
-	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-	int eccsize = chip->ecc.size, length = mtd->oobsize;
-	int len, pos, status = 0;
-	const uint8_t *bufpoi = chip->oob_poi;
-
-	pos = eccsize + chunk;
-
-	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-	len = min_t(int, length, chunk);
-	chip->write_buf(mtd, bufpoi, len);
-	bufpoi += len;
-	length -= len;
-	if (length > 0)
-		chip->write_buf(mtd, bufpoi, length);
-
-	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-	status = chip->waitfunc(mtd, chip);
-
-	return status & NAND_STATUS_FAIL ? -EIO : 0;
-
-}
-
-/*
- * read oob for small pages
- */
-static int atmel_nand_read_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip,	int page, int sndcmd)
-{
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
-}
-
-/*
  * Calculate HW ECC
  *
  * function called after a write
@@ -235,14 +193,14 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
 	/* get the first 2 ECC bytes */
 	ecc_value = ecc_readl(host->ecc, PR);
 
-	ecc_code[eccpos[0]] = ecc_value & 0xFF;
-	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
+	ecc_code[0] = ecc_value & 0xFF;
+	ecc_code[1] = (ecc_value >> 8) & 0xFF;
 
 	/* get the last 2 ECC bytes */
 	ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
 
-	ecc_code[eccpos[2]] = ecc_value & 0xFF;
-	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
+	ecc_code[2] = ecc_value & 0xFF;
+	ecc_code[3] = (ecc_value >> 8) & 0xFF;
 
 	return 0;
 }
@@ -476,14 +434,12 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 			res = -EIO;
 			goto err_ecc_ioremap;
 		}
-		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+		nand_chip->ecc.mode = NAND_ECC_HW;
 		nand_chip->ecc.calculate = atmel_nand_calculate;
 		nand_chip->ecc.correct = atmel_nand_correct;
 		nand_chip->ecc.hwctl = atmel_nand_hwctl;
 		nand_chip->ecc.read_page = atmel_nand_read_page;
 		nand_chip->ecc.bytes = 4;
-		nand_chip->ecc.prepad = 0;
-		nand_chip->ecc.postpad = 0;
 	}
 
 	nand_chip->chip_delay = 20;		/* 20us command delay time */
@@ -514,7 +470,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		goto err_scan_ident;
 	}
 
-	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
+	if (nand_chip->ecc.mode == NAND_ECC_HW) {
 		/* ECC is calculated for the whole page (1 step) */
 		nand_chip->ecc.size = mtd->writesize;
 
@@ -522,8 +478,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		switch (mtd->writesize) {
 		case 512:
 			nand_chip->ecc.layout = &atmel_oobinfo_small;
-			nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
-			nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
 			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
 			break;
 		case 1024:
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 3370a800fd36..9f1b451005ca 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -289,8 +289,10 @@ static int __init cs553x_init(void)
 	int i;
 	uint64_t val;
 
+#ifdef CONFIG_MTD_PARTITIONS
 	int mtd_parts_nb = 0;
 	struct mtd_partition *mtd_parts = NULL;
+#endif
 
 	/* If the CPU isn't a Geode GX or LX, abort */
 	if (!is_geode())
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 98ad3cefcaf4..4aa5bd6158da 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -918,8 +918,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 
 #ifdef CONFIG_MTD_OF_PARTS
 	if (ret == 0) {
-		ret = of_mtd_parse_partitions(priv->dev, &priv->mtd,
-		                              node, &parts);
+		ret = of_mtd_parse_partitions(priv->dev, node, &parts);
 		if (ret < 0)
 			goto err;
 	}
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 1ebfd87f00b4..024e3fffd4bb 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -13,6 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
@@ -36,8 +37,6 @@ struct fsl_upm_nand {
 	uint8_t upm_cmd_offset;
 	void __iomem *io_base;
 	int rnb_gpio;
-	const uint32_t *wait_pattern;
-	const uint32_t *wait_write;
 	int chip_delay;
 };
 
@@ -61,10 +60,11 @@ static void fun_wait_rnb(struct fsl_upm_nand *fun)
 	if (fun->rnb_gpio >= 0) {
 		while (--cnt && !fun_chip_ready(&fun->mtd))
 			cpu_relax();
+		if (!cnt)
+			dev_err(fun->dev, "tired waiting for RNB\n");
+	} else {
+		ndelay(100);
 	}
-
-	if (!cnt)
-		dev_err(fun->dev, "tired waiting for RNB\n");
 }
 
 static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
@@ -89,8 +89,7 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 	fsl_upm_run_pattern(&fun->upm, fun->io_base, cmd);
 
-	if (fun->wait_pattern)
-		fun_wait_rnb(fun);
+	fun_wait_rnb(fun);
 }
 
 static uint8_t fun_read_byte(struct mtd_info *mtd)
@@ -116,14 +115,16 @@ static void fun_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 
 	for (i = 0; i < len; i++) {
 		out_8(fun->chip.IO_ADDR_W, buf[i]);
-		if (fun->wait_write)
-			fun_wait_rnb(fun);
+		fun_wait_rnb(fun);
 	}
 }
 
-static int __devinit fun_chip_init(struct fsl_upm_nand *fun)
+static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
+				   const struct device_node *upm_np,
+				   const struct resource *io_res)
 {
 	int ret;
+	struct device_node *flash_np;
 #ifdef CONFIG_MTD_PARTITIONS
 	static const char *part_types[] = { "cmdlinepart", NULL, };
 #endif
@@ -143,18 +144,37 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun)
 	fun->mtd.priv = &fun->chip;
 	fun->mtd.owner = THIS_MODULE;
 
+	flash_np = of_get_next_child(upm_np, NULL);
+	if (!flash_np)
+		return -ENODEV;
+
+	fun->mtd.name = kasprintf(GFP_KERNEL, "%x.%s", io_res->start,
+				  flash_np->name);
+	if (!fun->mtd.name) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
 	ret = nand_scan(&fun->mtd, 1);
 	if (ret)
-		return ret;
-
-	fun->mtd.name = fun->dev->bus_id;
+		goto err;
 
 #ifdef CONFIG_MTD_PARTITIONS
 	ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
+
+#ifdef CONFIG_MTD_OF_PARTS
+	if (ret == 0)
+		ret = of_mtd_parse_partitions(fun->dev, &fun->mtd,
+					      flash_np, &fun->parts);
+#endif
 	if (ret > 0)
-		return add_mtd_partitions(&fun->mtd, fun->parts, ret);
+		ret = add_mtd_partitions(&fun->mtd, fun->parts, ret);
+	else
 #endif
-	return add_mtd_device(&fun->mtd);
+		ret = add_mtd_device(&fun->mtd);
+err:
+	of_node_put(flash_np);
+	return ret;
 }
 
 static int __devinit fun_probe(struct of_device *ofdev,
@@ -211,6 +231,12 @@ static int __devinit fun_probe(struct of_device *ofdev,
 		goto err2;
 	}
 
+	prop = of_get_property(ofdev->node, "chip-delay", NULL);
+	if (prop)
+		fun->chip_delay = *prop;
+	else
+		fun->chip_delay = 50;
+
 	fun->io_base = devm_ioremap_nocache(&ofdev->dev, io_res.start,
 					  io_res.end - io_res.start + 1);
 	if (!fun->io_base) {
@@ -220,17 +246,8 @@ static int __devinit fun_probe(struct of_device *ofdev,
 
 	fun->dev = &ofdev->dev;
 	fun->last_ctrl = NAND_CLE;
-	fun->wait_pattern = of_get_property(ofdev->node, "fsl,wait-pattern",
-					    NULL);
-	fun->wait_write = of_get_property(ofdev->node, "fsl,wait-write", NULL);
-
-	prop = of_get_property(ofdev->node, "chip-delay", NULL);
-	if (prop)
-		fun->chip_delay = *prop;
-	else
-		fun->chip_delay = 50;
 
-	ret = fun_chip_init(fun);
+	ret = fun_chip_init(fun, ofdev->node, &io_res);
 	if (ret)
 		goto err2;
 
@@ -251,6 +268,7 @@ static int __devexit fun_remove(struct of_device *ofdev)
 	struct fsl_upm_nand *fun = dev_get_drvdata(&ofdev->dev);
 
 	nand_release(&fun->mtd);
+	kfree(fun->mtd.name);
 
 	if (fun->rnb_gpio >= 0)
 		gpio_free(fun->rnb_gpio);
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
new file mode 100644
index 000000000000..8f902e75aa85
--- /dev/null
+++ b/drivers/mtd/nand/gpio.c
@@ -0,0 +1,375 @@
+/*
+ * drivers/mtd/nand/gpio.c
+ *
+ * Updated, and converted to generic GPIO based driver by Russell King.
+ *
+ * Written by Ben Dooks <ben@simtec.co.uk>
+ *   Based on 2.4 version by Mark Whittaker
+ *
+ * © 2004 Simtec Electronics
+ *
+ * Device driver for NAND connected via GPIO
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand-gpio.h>
+
+struct gpiomtd {
+	void __iomem		*io_sync;
+	struct mtd_info		mtd_info;
+	struct nand_chip	nand_chip;
+	struct gpio_nand_platdata plat;
+};
+
+#define gpio_nand_getpriv(x) container_of(x, struct gpiomtd, mtd_info)
+
+
+#ifdef CONFIG_ARM
+/* gpio_nand_dosync()
+ *
+ * Make sure the GPIO state changes occur in-order with writes to NAND
+ * memory region.
+ * Needed on PXA due to bus-reordering within the SoC itself (see section on
+ * I/O ordering in PXA manual (section 2.3, p35)
+ */
+static void gpio_nand_dosync(struct gpiomtd *gpiomtd)
+{
+	unsigned long tmp;
+
+	if (gpiomtd->io_sync) {
+		/*
+		 * Linux memory barriers don't cater for what's required here.
+		 * What's required is what's here - a read from a separate
+		 * region with a dependency on that read.
+		 */
+		tmp = readl(gpiomtd->io_sync);
+		asm volatile("mov %1, %0\n" : "=r" (tmp) : "r" (tmp));
+	}
+}
+#else
+static inline void gpio_nand_dosync(struct gpiomtd *gpiomtd) {}
+#endif
+
+static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+
+	gpio_nand_dosync(gpiomtd);
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		gpio_set_value(gpiomtd->plat.gpio_nce, !(ctrl & NAND_NCE));
+		gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE));
+		gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE));
+		gpio_nand_dosync(gpiomtd);
+	}
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	writeb(cmd, gpiomtd->nand_chip.IO_ADDR_W);
+	gpio_nand_dosync(gpiomtd);
+}
+
+static void gpio_nand_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+
+	writesb(this->IO_ADDR_W, buf, len);
+}
+
+static void gpio_nand_readbuf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+
+	readsb(this->IO_ADDR_R, buf, len);
+}
+
+static int gpio_nand_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned char read, *p = (unsigned char *) buf;
+	int i, err = 0;
+
+	for (i = 0; i < len; i++) {
+		read = readb(this->IO_ADDR_R);
+		if (read != p[i]) {
+			pr_debug("%s: err at %d (read %04x vs %04x)\n",
+			       __func__, i, read, p[i]);
+			err = -EFAULT;
+		}
+	}
+	return err;
+}
+
+static void gpio_nand_writebuf16(struct mtd_info *mtd, const u_char *buf,
+				 int len)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (IS_ALIGNED((unsigned long)buf, 2)) {
+		writesw(this->IO_ADDR_W, buf, len>>1);
+	} else {
+		int i;
+		unsigned short *ptr = (unsigned short *)buf;
+
+		for (i = 0; i < len; i += 2, ptr++)
+			writew(*ptr, this->IO_ADDR_W);
+	}
+}
+
+static void gpio_nand_readbuf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (IS_ALIGNED((unsigned long)buf, 2)) {
+		readsw(this->IO_ADDR_R, buf, len>>1);
+	} else {
+		int i;
+		unsigned short *ptr = (unsigned short *)buf;
+
+		for (i = 0; i < len; i += 2, ptr++)
+			*ptr = readw(this->IO_ADDR_R);
+	}
+}
+
+static int gpio_nand_verifybuf16(struct mtd_info *mtd, const u_char *buf,
+				 int len)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned short read, *p = (unsigned short *) buf;
+	int i, err = 0;
+	len >>= 1;
+
+	for (i = 0; i < len; i++) {
+		read = readw(this->IO_ADDR_R);
+		if (read != p[i]) {
+			pr_debug("%s: err at %d (read %04x vs %04x)\n",
+			       __func__, i, read, p[i]);
+			err = -EFAULT;
+		}
+	}
+	return err;
+}
+
+
+static int gpio_nand_devready(struct mtd_info *mtd)
+{
+	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+	return gpio_get_value(gpiomtd->plat.gpio_rdy);
+}
+
+static int __devexit gpio_nand_remove(struct platform_device *dev)
+{
+	struct gpiomtd *gpiomtd = platform_get_drvdata(dev);
+	struct resource *res;
+
+	nand_release(&gpiomtd->mtd_info);
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	iounmap(gpiomtd->io_sync);
+	if (res)
+		release_mem_region(res->start, res->end - res->start + 1);
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	iounmap(gpiomtd->nand_chip.IO_ADDR_R);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+	gpio_set_value(gpiomtd->plat.gpio_nce, 1);
+
+	gpio_free(gpiomtd->plat.gpio_cle);
+	gpio_free(gpiomtd->plat.gpio_ale);
+	gpio_free(gpiomtd->plat.gpio_nce);
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_free(gpiomtd->plat.gpio_nwp);
+	gpio_free(gpiomtd->plat.gpio_rdy);
+
+	kfree(gpiomtd);
+
+	return 0;
+}
+
+static void __iomem *request_and_remap(struct resource *res, size_t size,
+					const char *name, int *err)
+{
+	void __iomem *ptr;
+
+	if (!request_mem_region(res->start, res->end - res->start + 1, name)) {
+		*err = -EBUSY;
+		return NULL;
+	}
+
+	ptr = ioremap(res->start, size);
+	if (!ptr) {
+		release_mem_region(res->start, res->end - res->start + 1);
+		*err = -ENOMEM;
+	}
+	return ptr;
+}
+
+static int __devinit gpio_nand_probe(struct platform_device *dev)
+{
+	struct gpiomtd *gpiomtd;
+	struct nand_chip *this;
+	struct resource *res0, *res1;
+	int ret;
+
+	if (!dev->dev.platform_data)
+		return -EINVAL;
+
+	res0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res0)
+		return -EINVAL;
+
+	gpiomtd = kzalloc(sizeof(*gpiomtd), GFP_KERNEL);
+	if (gpiomtd == NULL) {
+		dev_err(&dev->dev, "failed to create NAND MTD\n");
+		return -ENOMEM;
+	}
+
+	this = &gpiomtd->nand_chip;
+	this->IO_ADDR_R = request_and_remap(res0, 2, "NAND", &ret);
+	if (!this->IO_ADDR_R) {
+		dev_err(&dev->dev, "unable to map NAND\n");
+		goto err_map;
+	}
+
+	res1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (res1) {
+		gpiomtd->io_sync = request_and_remap(res1, 4, "NAND sync", &ret);
+		if (!gpiomtd->io_sync) {
+			dev_err(&dev->dev, "unable to map sync NAND\n");
+			goto err_sync;
+		}
+	}
+
+	memcpy(&gpiomtd->plat, dev->dev.platform_data, sizeof(gpiomtd->plat));
+
+	ret = gpio_request(gpiomtd->plat.gpio_nce, "NAND NCE");
+	if (ret)
+		goto err_nce;
+	gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
+		ret = gpio_request(gpiomtd->plat.gpio_nwp, "NAND NWP");
+		if (ret)
+			goto err_nwp;
+		gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
+	}
+	ret = gpio_request(gpiomtd->plat.gpio_ale, "NAND ALE");
+	if (ret)
+		goto err_ale;
+	gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
+	ret = gpio_request(gpiomtd->plat.gpio_cle, "NAND CLE");
+	if (ret)
+		goto err_cle;
+	gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
+	ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
+	if (ret)
+		goto err_rdy;
+	gpio_direction_input(gpiomtd->plat.gpio_rdy);
+
+
+	this->IO_ADDR_W  = this->IO_ADDR_R;
+	this->ecc.mode   = NAND_ECC_SOFT;
+	this->options    = gpiomtd->plat.options;
+	this->chip_delay = gpiomtd->plat.chip_delay;
+
+	/* install our routines */
+	this->cmd_ctrl   = gpio_nand_cmd_ctrl;
+	this->dev_ready  = gpio_nand_devready;
+
+	if (this->options & NAND_BUSWIDTH_16) {
+		this->read_buf   = gpio_nand_readbuf16;
+		this->write_buf  = gpio_nand_writebuf16;
+		this->verify_buf = gpio_nand_verifybuf16;
+	} else {
+		this->read_buf   = gpio_nand_readbuf;
+		this->write_buf  = gpio_nand_writebuf;
+		this->verify_buf = gpio_nand_verifybuf;
+	}
+
+	/* set the mtd private data for the nand driver */
+	gpiomtd->mtd_info.priv = this;
+	gpiomtd->mtd_info.owner = THIS_MODULE;
+
+	if (nand_scan(&gpiomtd->mtd_info, 1)) {
+		dev_err(&dev->dev, "no nand chips found?\n");
+		ret = -ENXIO;
+		goto err_wp;
+	}
+
+	if (gpiomtd->plat.adjust_parts)
+		gpiomtd->plat.adjust_parts(&gpiomtd->plat,
+					   gpiomtd->mtd_info.size);
+
+	add_mtd_partitions(&gpiomtd->mtd_info, gpiomtd->plat.parts,
+			   gpiomtd->plat.num_parts);
+	platform_set_drvdata(dev, gpiomtd);
+
+	return 0;
+
+err_wp:
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+	gpio_free(gpiomtd->plat.gpio_rdy);
+err_rdy:
+	gpio_free(gpiomtd->plat.gpio_cle);
+err_cle:
+	gpio_free(gpiomtd->plat.gpio_ale);
+err_ale:
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_free(gpiomtd->plat.gpio_nwp);
+err_nwp:
+	gpio_free(gpiomtd->plat.gpio_nce);
+err_nce:
+	iounmap(gpiomtd->io_sync);
+	if (res1)
+		release_mem_region(res1->start, res1->end - res1->start + 1);
+err_sync:
+	iounmap(gpiomtd->nand_chip.IO_ADDR_R);
+	release_mem_region(res0->start, res0->end - res0->start + 1);
+err_map:
+	kfree(gpiomtd);
+	return ret;
+}
+
+static struct platform_driver gpio_nand_driver = {
+	.probe		= gpio_nand_probe,
+	.remove		= gpio_nand_remove,
+	.driver		= {
+		.name	= "gpio-nand",
+	},
+};
+
+static int __init gpio_nand_init(void)
+{
+	printk(KERN_INFO "GPIO NAND driver, © 2004 Simtec Electronics\n");
+
+	return platform_driver_register(&gpio_nand_driver);
+}
+
+static void __exit gpio_nand_exit(void)
+{
+	platform_driver_unregister(&gpio_nand_driver);
+}
+
+module_init(gpio_nand_init);
+module_exit(gpio_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("GPIO NAND Driver");
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
new file mode 100644
index 000000000000..21fd4f1c4806
--- /dev/null
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -0,0 +1,1077 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+#include <mach/mxc_nand.h>
+
+#define DRIVER_NAME "mxc_nand"
+
+/* Addresses for NFC registers */
+#define NFC_BUF_SIZE		0xE00
+#define NFC_BUF_ADDR		0xE04
+#define NFC_FLASH_ADDR		0xE06
+#define NFC_FLASH_CMD		0xE08
+#define NFC_CONFIG		0xE0A
+#define NFC_ECC_STATUS_RESULT	0xE0C
+#define NFC_RSLTMAIN_AREA	0xE0E
+#define NFC_RSLTSPARE_AREA	0xE10
+#define NFC_WRPROT		0xE12
+#define NFC_UNLOCKSTART_BLKADDR	0xE14
+#define NFC_UNLOCKEND_BLKADDR	0xE16
+#define NFC_NF_WRPRST		0xE18
+#define NFC_CONFIG1		0xE1A
+#define NFC_CONFIG2		0xE1C
+
+/* Addresses for NFC RAM BUFFER Main area 0 */
+#define MAIN_AREA0		0x000
+#define MAIN_AREA1		0x200
+#define MAIN_AREA2		0x400
+#define MAIN_AREA3		0x600
+
+/* Addresses for NFC SPARE BUFFER Spare area 0 */
+#define SPARE_AREA0		0x800
+#define SPARE_AREA1		0x810
+#define SPARE_AREA2		0x820
+#define SPARE_AREA3		0x830
+
+/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Command operation */
+#define NFC_CMD            0x1
+
+/* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Address operation */
+#define NFC_ADDR           0x2
+
+/* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Input operation */
+#define NFC_INPUT          0x4
+
+/* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
+ * for Data Output operation */
+#define NFC_OUTPUT         0x8
+
+/* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
+ * for Read ID operation */
+#define NFC_ID             0x10
+
+/* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
+ * for Read Status operation */
+#define NFC_STATUS         0x20
+
+/* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
+ * Status operation */
+#define NFC_INT            0x8000
+
+#define NFC_SP_EN           (1 << 2)
+#define NFC_ECC_EN          (1 << 3)
+#define NFC_INT_MSK         (1 << 4)
+#define NFC_BIG             (1 << 5)
+#define NFC_RST             (1 << 6)
+#define NFC_CE              (1 << 7)
+#define NFC_ONE_CYCLE       (1 << 8)
+
+struct mxc_nand_host {
+	struct mtd_info		mtd;
+	struct nand_chip	nand;
+	struct mtd_partition	*parts;
+	struct device		*dev;
+
+	void __iomem		*regs;
+	int			spare_only;
+	int			status_request;
+	int			pagesize_2k;
+	uint16_t		col_addr;
+	struct clk		*clk;
+	int			clk_act;
+	int			irq;
+
+	wait_queue_head_t	irq_waitq;
+};
+
+/* Define delays in microsec for NAND device operations */
+#define TROP_US_DELAY   2000
+/* Macros to get byte and bit positions of ECC */
+#define COLPOS(x)  ((x) >> 3)
+#define BITPOS(x) ((x) & 0xf)
+
+/* Define single bit Error positions in Main & Spare area */
+#define MAIN_SINGLEBIT_ERROR 0x4
+#define SPARE_SINGLEBIT_ERROR 0x1
+
+/* OOB placement block for use with hardware ecc generation */
+static struct nand_ecclayout nand_hw_eccoob_8 = {
+	.eccbytes = 5,
+	.eccpos = {6, 7, 8, 9, 10},
+	.oobfree = {{0, 5}, {11, 5}, }
+};
+
+static struct nand_ecclayout nand_hw_eccoob_16 = {
+	.eccbytes = 5,
+	.eccpos = {6, 7, 8, 9, 10},
+	.oobfree = {{0, 6}, {12, 4}, }
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
+#endif
+
+static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
+{
+	struct mxc_nand_host *host = dev_id;
+
+	uint16_t tmp;
+
+	tmp = readw(host->regs + NFC_CONFIG1);
+	tmp |= NFC_INT_MSK; /* Disable interrupt */
+	writew(tmp, host->regs + NFC_CONFIG1);
+
+	wake_up(&host->irq_waitq);
+
+	return IRQ_HANDLED;
+}
+
+/* This function polls the NANDFC to wait for the basic operation to
+ * complete by checking the INT bit of config2 register.
+ */
+static void wait_op_done(struct mxc_nand_host *host, int max_retries,
+				uint16_t param, int useirq)
+{
+	uint32_t tmp;
+
+	if (useirq) {
+		if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
+
+			tmp = readw(host->regs + NFC_CONFIG1);
+			tmp  &= ~NFC_INT_MSK;	/* Enable interrupt */
+			writew(tmp, host->regs + NFC_CONFIG1);
+
+			wait_event(host->irq_waitq,
+				readw(host->regs + NFC_CONFIG2) & NFC_INT);
+
+			tmp = readw(host->regs + NFC_CONFIG2);
+			tmp  &= ~NFC_INT;
+			writew(tmp, host->regs + NFC_CONFIG2);
+		}
+	} else {
+		while (max_retries-- > 0) {
+			if (readw(host->regs + NFC_CONFIG2) & NFC_INT) {
+				tmp = readw(host->regs + NFC_CONFIG2);
+				tmp  &= ~NFC_INT;
+				writew(tmp, host->regs + NFC_CONFIG2);
+				break;
+			}
+			udelay(1);
+		}
+		if (max_retries <= 0)
+			DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
+			      __func__, param);
+	}
+}
+
+/* This function issues the specified command to the NAND device and
+ * waits for completion. */
+static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+
+	writew(cmd, host->regs + NFC_FLASH_CMD);
+	writew(NFC_CMD, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, cmd, useirq);
+}
+
+/* This function sends an address (or partial address) to the
+ * NAND device. The address is used to select the source/destination for
+ * a NAND command. */
+static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+
+	writew(addr, host->regs + NFC_FLASH_ADDR);
+	writew(NFC_ADDR, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, addr, islast);
+}
+
+/* This function requests the NANDFC to initate the transfer
+ * of data currently in the NANDFC RAM buffer to the NAND device. */
+static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
+			int spare_only)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
+
+	/* NANDFC buffer 0 is used for page read/write */
+	writew(buf_id, host->regs + NFC_BUF_ADDR);
+
+	/* Configure spare or page+spare access */
+	if (!host->pagesize_2k) {
+		uint16_t config1 = readw(host->regs + NFC_CONFIG1);
+		if (spare_only)
+			config1 |= NFC_SP_EN;
+		else
+			config1 &= ~(NFC_SP_EN);
+		writew(config1, host->regs + NFC_CONFIG1);
+	}
+
+	writew(NFC_INPUT, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, spare_only, true);
+}
+
+/* Requests NANDFC to initated the transfer of data from the
+ * NAND device into in the NANDFC ram buffer. */
+static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
+		int spare_only)
+{
+	DEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
+
+	/* NANDFC buffer 0 is used for page read/write */
+	writew(buf_id, host->regs + NFC_BUF_ADDR);
+
+	/* Configure spare or page+spare access */
+	if (!host->pagesize_2k) {
+		uint32_t config1 = readw(host->regs + NFC_CONFIG1);
+		if (spare_only)
+			config1 |= NFC_SP_EN;
+		else
+			config1 &= ~NFC_SP_EN;
+		writew(config1, host->regs + NFC_CONFIG1);
+	}
+
+	writew(NFC_OUTPUT, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, spare_only, true);
+}
+
+/* Request the NANDFC to perform a read of the NAND device ID. */
+static void send_read_id(struct mxc_nand_host *host)
+{
+	struct nand_chip *this = &host->nand;
+	uint16_t tmp;
+
+	/* NANDFC buffer 0 is used for device ID output */
+	writew(0x0, host->regs + NFC_BUF_ADDR);
+
+	/* Read ID into main buffer */
+	tmp = readw(host->regs + NFC_CONFIG1);
+	tmp &= ~NFC_SP_EN;
+	writew(tmp, host->regs + NFC_CONFIG1);
+
+	writew(NFC_ID, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, 0, true);
+
+	if (this->options & NAND_BUSWIDTH_16) {
+		void __iomem *main_buf = host->regs + MAIN_AREA0;
+		/* compress the ID info */
+		writeb(readb(main_buf + 2), main_buf + 1);
+		writeb(readb(main_buf + 4), main_buf + 2);
+		writeb(readb(main_buf + 6), main_buf + 3);
+		writeb(readb(main_buf + 8), main_buf + 4);
+		writeb(readb(main_buf + 10), main_buf + 5);
+	}
+}
+
+/* This function requests the NANDFC to perform a read of the
+ * NAND device status and returns the current status. */
+static uint16_t get_dev_status(struct mxc_nand_host *host)
+{
+	void __iomem *main_buf = host->regs + MAIN_AREA1;
+	uint32_t store;
+	uint16_t ret, tmp;
+	/* Issue status request to NAND device */
+
+	/* store the main area1 first word, later do recovery */
+	store = readl(main_buf);
+	/* NANDFC buffer 1 is used for device status to prevent
+	 * corruption of read/write buffer on status requests. */
+	writew(1, host->regs + NFC_BUF_ADDR);
+
+	/* Read status into main buffer */
+	tmp = readw(host->regs + NFC_CONFIG1);
+	tmp &= ~NFC_SP_EN;
+	writew(tmp, host->regs + NFC_CONFIG1);
+
+	writew(NFC_STATUS, host->regs + NFC_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, TROP_US_DELAY, 0, true);
+
+	/* Status is placed in first word of main buffer */
+	/* get status, then recovery area 1 data */
+	ret = readw(main_buf);
+	writel(store, main_buf);
+
+	return ret;
+}
+
+/* This functions is used by upper layer to checks if device is ready */
+static int mxc_nand_dev_ready(struct mtd_info *mtd)
+{
+	/*
+	 * NFC handles R/B internally. Therefore, this function
+	 * always returns status as ready.
+	 */
+	return 1;
+}
+
+static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	/*
+	 * If HW ECC is enabled, we turn it on during init. There is
+	 * no need to enable again here.
+	 */
+}
+
+static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+				 u_char *read_ecc, u_char *calc_ecc)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+	/*
+	 * 1-Bit errors are automatically corrected in HW.  No need for
+	 * additional correction.  2-Bit errors cannot be corrected by
+	 * HW ECC, so we need to return failure
+	 */
+	uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT);
+
+	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
+		DEBUG(MTD_DEBUG_LEVEL0,
+		      "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				  u_char *ecc_code)
+{
+	return 0;
+}
+
+static u_char mxc_nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint8_t ret = 0;
+	uint16_t col, rd_word;
+	uint16_t __iomem *main_buf = host->regs + MAIN_AREA0;
+	uint16_t __iomem *spare_buf = host->regs + SPARE_AREA0;
+
+	/* Check for status request */
+	if (host->status_request)
+		return get_dev_status(host) & 0xFF;
+
+	/* Get column for 16-bit access */
+	col = host->col_addr >> 1;
+
+	/* If we are accessing the spare region */
+	if (host->spare_only)
+		rd_word = readw(&spare_buf[col]);
+	else
+		rd_word = readw(&main_buf[col]);
+
+	/* Pick upper/lower byte of word from RAM buffer */
+	if (host->col_addr & 0x1)
+		ret = (rd_word >> 8) & 0xFF;
+	else
+		ret = rd_word & 0xFF;
+
+	/* Update saved column address */
+	host->col_addr++;
+
+	return ret;
+}
+
+static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint16_t col, rd_word, ret;
+	uint16_t __iomem *p;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_read_word(col = %d)\n", host->col_addr);
+
+	col = host->col_addr;
+	/* Adjust saved column address */
+	if (col < mtd->writesize && host->spare_only)
+		col += mtd->writesize;
+
+	if (col < mtd->writesize)
+		p = (host->regs + MAIN_AREA0) + (col >> 1);
+	else
+		p = (host->regs + SPARE_AREA0) + ((col - mtd->writesize) >> 1);
+
+	if (col & 1) {
+		rd_word = readw(p);
+		ret = (rd_word >> 8) & 0xff;
+		rd_word = readw(&p[1]);
+		ret |= (rd_word << 8) & 0xff00;
+
+	} else
+		ret = readw(p);
+
+	/* Update saved column address */
+	host->col_addr = col + 2;
+
+	return ret;
+}
+
+/* Write data of length len to buffer buf. The data to be
+ * written on NAND Flash is first copied to RAMbuffer. After the Data Input
+ * Operation by the NFC, the data is written to NAND Flash */
+static void mxc_nand_write_buf(struct mtd_info *mtd,
+				const u_char *buf, int len)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	int n, col, i = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr,
+	      len);
+
+	col = host->col_addr;
+
+	/* Adjust saved column address */
+	if (col < mtd->writesize && host->spare_only)
+		col += mtd->writesize;
+
+	n = mtd->writesize + mtd->oobsize - col;
+	n = min(len, n);
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n);
+
+	while (n) {
+		void __iomem *p;
+
+		if (col < mtd->writesize)
+			p = host->regs + MAIN_AREA0 + (col & ~3);
+		else
+			p = host->regs + SPARE_AREA0 -
+						mtd->writesize + (col & ~3);
+
+		DEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__,
+		      __LINE__, p);
+
+		if (((col | (int)&buf[i]) & 3) || n < 16) {
+			uint32_t data = 0;
+
+			if (col & 3 || n < 4)
+				data = readl(p);
+
+			switch (col & 3) {
+			case 0:
+				if (n) {
+					data = (data & 0xffffff00) |
+					    (buf[i++] << 0);
+					n--;
+					col++;
+				}
+			case 1:
+				if (n) {
+					data = (data & 0xffff00ff) |
+					    (buf[i++] << 8);
+					n--;
+					col++;
+				}
+			case 2:
+				if (n) {
+					data = (data & 0xff00ffff) |
+					    (buf[i++] << 16);
+					n--;
+					col++;
+				}
+			case 3:
+				if (n) {
+					data = (data & 0x00ffffff) |
+					    (buf[i++] << 24);
+					n--;
+					col++;
+				}
+			}
+
+			writel(data, p);
+		} else {
+			int m = mtd->writesize - col;
+
+			if (col >= mtd->writesize)
+				m += mtd->oobsize;
+
+			m = min(n, m) & ~3;
+
+			DEBUG(MTD_DEBUG_LEVEL3,
+			      "%s:%d: n = %d, m = %d, i = %d, col = %d\n",
+			      __func__,  __LINE__, n, m, i, col);
+
+			memcpy(p, &buf[i], m);
+			col += m;
+			i += m;
+			n -= m;
+		}
+	}
+	/* Update saved column address */
+	host->col_addr = col;
+}
+
+/* Read the data buffer from the NAND Flash. To read the data from NAND
+ * Flash first the data output cycle is initiated by the NFC, which copies
+ * the data to RAMbuffer. This data of length len is then copied to buffer buf.
+ */
+static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	int n, col, i = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len);
+
+	col = host->col_addr;
+
+	/* Adjust saved column address */
+	if (col < mtd->writesize && host->spare_only)
+		col += mtd->writesize;
+
+	n = mtd->writesize + mtd->oobsize - col;
+	n = min(len, n);
+
+	while (n) {
+		void __iomem *p;
+
+		if (col < mtd->writesize)
+			p = host->regs + MAIN_AREA0 + (col & ~3);
+		else
+			p = host->regs + SPARE_AREA0 -
+					mtd->writesize + (col & ~3);
+
+		if (((col | (int)&buf[i]) & 3) || n < 16) {
+			uint32_t data;
+
+			data = readl(p);
+			switch (col & 3) {
+			case 0:
+				if (n) {
+					buf[i++] = (uint8_t) (data);
+					n--;
+					col++;
+				}
+			case 1:
+				if (n) {
+					buf[i++] = (uint8_t) (data >> 8);
+					n--;
+					col++;
+				}
+			case 2:
+				if (n) {
+					buf[i++] = (uint8_t) (data >> 16);
+					n--;
+					col++;
+				}
+			case 3:
+				if (n) {
+					buf[i++] = (uint8_t) (data >> 24);
+					n--;
+					col++;
+				}
+			}
+		} else {
+			int m = mtd->writesize - col;
+
+			if (col >= mtd->writesize)
+				m += mtd->oobsize;
+
+			m = min(n, m) & ~3;
+			memcpy(&buf[i], p, m);
+			col += m;
+			i += m;
+			n -= m;
+		}
+	}
+	/* Update saved column address */
+	host->col_addr = col;
+
+}
+
+/* Used by the upper layer to verify the data in NAND Flash
+ * with the data in the buf. */
+static int mxc_nand_verify_buf(struct mtd_info *mtd,
+				const u_char *buf, int len)
+{
+	return -EFAULT;
+}
+
+/* This function is used by upper layer for select and
+ * deselect of the NAND chip */
+static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+#ifdef CONFIG_MTD_NAND_MXC_FORCE_CE
+	if (chip > 0) {
+		DEBUG(MTD_DEBUG_LEVEL0,
+		      "ERROR:  Illegal chip select (chip = %d)\n", chip);
+		return;
+	}
+
+	if (chip == -1) {
+		writew(readw(host->regs + NFC_CONFIG1) & ~NFC_CE,
+				host->regs + NFC_CONFIG1);
+		return;
+	}
+
+	writew(readw(host->regs + NFC_CONFIG1) | NFC_CE,
+			host->regs + NFC_CONFIG1);
+#endif
+
+	switch (chip) {
+	case -1:
+		/* Disable the NFC clock */
+		if (host->clk_act) {
+			clk_disable(host->clk);
+			host->clk_act = 0;
+		}
+		break;
+	case 0:
+		/* Enable the NFC clock */
+		if (!host->clk_act) {
+			clk_enable(host->clk);
+			host->clk_act = 1;
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+/* Used by the upper layer to write command to NAND Flash for
+ * different operations to be carried out on NAND Flash */
+static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+				int column, int page_addr)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	int useirq = true;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+	      command, column, page_addr);
+
+	/* Reset command state information */
+	host->status_request = false;
+
+	/* Command pre-processing step */
+	switch (command) {
+
+	case NAND_CMD_STATUS:
+		host->col_addr = 0;
+		host->status_request = true;
+		break;
+
+	case NAND_CMD_READ0:
+		host->col_addr = column;
+		host->spare_only = false;
+		useirq = false;
+		break;
+
+	case NAND_CMD_READOOB:
+		host->col_addr = column;
+		host->spare_only = true;
+		useirq = false;
+		if (host->pagesize_2k)
+			command = NAND_CMD_READ0; /* only READ0 is valid */
+		break;
+
+	case NAND_CMD_SEQIN:
+		if (column >= mtd->writesize) {
+			/*
+			 * FIXME: before send SEQIN command for write OOB,
+			 * We must read one page out.
+			 * For K9F1GXX has no READ1 command to set current HW
+			 * pointer to spare area, we must write the whole page
+			 * including OOB together.
+			 */
+			if (host->pagesize_2k)
+				/* call ourself to read a page */
+				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
+						page_addr);
+
+			host->col_addr = column - mtd->writesize;
+			host->spare_only = true;
+
+			/* Set program pointer to spare region */
+			if (!host->pagesize_2k)
+				send_cmd(host, NAND_CMD_READOOB, false);
+		} else {
+			host->spare_only = false;
+			host->col_addr = column;
+
+			/* Set program pointer to page start */
+			if (!host->pagesize_2k)
+				send_cmd(host, NAND_CMD_READ0, false);
+		}
+		useirq = false;
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		send_prog_page(host, 0, host->spare_only);
+
+		if (host->pagesize_2k) {
+			/* data in 4 areas datas */
+			send_prog_page(host, 1, host->spare_only);
+			send_prog_page(host, 2, host->spare_only);
+			send_prog_page(host, 3, host->spare_only);
+		}
+
+		break;
+
+	case NAND_CMD_ERASE1:
+		useirq = false;
+		break;
+	}
+
+	/* Write out the command to the device. */
+	send_cmd(host, command, useirq);
+
+	/* Write out column address, if necessary */
+	if (column != -1) {
+		/*
+		 * MXC NANDFC can only perform full page+spare or
+		 * spare-only read/write.  When the upper layers
+		 * layers perform a read/write buf operation,
+		 * we will used the saved column adress to index into
+		 * the full page.
+		 */
+		send_addr(host, 0, page_addr == -1);
+		if (host->pagesize_2k)
+			/* another col addr cycle for 2k page */
+			send_addr(host, 0, false);
+	}
+
+	/* Write out page address, if necessary */
+	if (page_addr != -1) {
+		/* paddr_0 - p_addr_7 */
+		send_addr(host, (page_addr & 0xff), false);
+
+		if (host->pagesize_2k) {
+			send_addr(host, (page_addr >> 8) & 0xFF, false);
+			if (mtd->size >= 0x40000000)
+				send_addr(host, (page_addr >> 16) & 0xff, true);
+		} else {
+			/* One more address cycle for higher density devices */
+			if (mtd->size >= 0x4000000) {
+				/* paddr_8 - paddr_15 */
+				send_addr(host, (page_addr >> 8) & 0xff, false);
+				send_addr(host, (page_addr >> 16) & 0xff, true);
+			} else
+				/* paddr_8 - paddr_15 */
+				send_addr(host, (page_addr >> 8) & 0xff, true);
+		}
+	}
+
+	/* Command post-processing step */
+	switch (command) {
+
+	case NAND_CMD_RESET:
+		break;
+
+	case NAND_CMD_READOOB:
+	case NAND_CMD_READ0:
+		if (host->pagesize_2k) {
+			/* send read confirm command */
+			send_cmd(host, NAND_CMD_READSTART, true);
+			/* read for each AREA */
+			send_read_page(host, 0, host->spare_only);
+			send_read_page(host, 1, host->spare_only);
+			send_read_page(host, 2, host->spare_only);
+			send_read_page(host, 3, host->spare_only);
+		} else
+			send_read_page(host, 0, host->spare_only);
+		break;
+
+	case NAND_CMD_READID:
+		send_read_id(host);
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		break;
+
+	case NAND_CMD_STATUS:
+		break;
+
+	case NAND_CMD_ERASE2:
+		break;
+	}
+}
+
+static int __init mxcnd_probe(struct platform_device *pdev)
+{
+	struct nand_chip *this;
+	struct mtd_info *mtd;
+	struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
+	struct mxc_nand_host *host;
+	struct resource *res;
+	uint16_t tmp;
+	int err = 0, nr_parts = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	host = kzalloc(sizeof(struct mxc_nand_host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	host->dev = &pdev->dev;
+	/* structures must be linked */
+	this = &host->nand;
+	mtd = &host->mtd;
+	mtd->priv = this;
+	mtd->owner = THIS_MODULE;
+
+	/* 50 us command delay time */
+	this->chip_delay = 5;
+
+	this->priv = host;
+	this->dev_ready = mxc_nand_dev_ready;
+	this->cmdfunc = mxc_nand_command;
+	this->select_chip = mxc_nand_select_chip;
+	this->read_byte = mxc_nand_read_byte;
+	this->read_word = mxc_nand_read_word;
+	this->write_buf = mxc_nand_write_buf;
+	this->read_buf = mxc_nand_read_buf;
+	this->verify_buf = mxc_nand_verify_buf;
+
+	host->clk = clk_get(&pdev->dev, "nfc_clk");
+	if (IS_ERR(host->clk))
+		goto eclk;
+
+	clk_enable(host->clk);
+	host->clk_act = 1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENODEV;
+		goto eres;
+	}
+
+	host->regs = ioremap(res->start, res->end - res->start + 1);
+	if (!host->regs) {
+		err = -EIO;
+		goto eres;
+	}
+
+	tmp = readw(host->regs + NFC_CONFIG1);
+	tmp |= NFC_INT_MSK;
+	writew(tmp, host->regs + NFC_CONFIG1);
+
+	init_waitqueue_head(&host->irq_waitq);
+
+	host->irq = platform_get_irq(pdev, 0);
+
+	err = request_irq(host->irq, mxc_nfc_irq, 0, "mxc_nd", host);
+	if (err)
+		goto eirq;
+
+	if (pdata->hw_ecc) {
+		this->ecc.calculate = mxc_nand_calculate_ecc;
+		this->ecc.hwctl = mxc_nand_enable_hwecc;
+		this->ecc.correct = mxc_nand_correct_data;
+		this->ecc.mode = NAND_ECC_HW;
+		this->ecc.size = 512;
+		this->ecc.bytes = 3;
+		this->ecc.layout = &nand_hw_eccoob_8;
+		tmp = readw(host->regs + NFC_CONFIG1);
+		tmp |= NFC_ECC_EN;
+		writew(tmp, host->regs + NFC_CONFIG1);
+	} else {
+		this->ecc.size = 512;
+		this->ecc.bytes = 3;
+		this->ecc.layout = &nand_hw_eccoob_8;
+		this->ecc.mode = NAND_ECC_SOFT;
+		tmp = readw(host->regs + NFC_CONFIG1);
+		tmp &= ~NFC_ECC_EN;
+		writew(tmp, host->regs + NFC_CONFIG1);
+	}
+
+	/* Reset NAND */
+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* preset operation */
+	/* Unlock the internal RAM Buffer */
+	writew(0x2, host->regs + NFC_CONFIG);
+
+	/* Blocks to be unlocked */
+	writew(0x0, host->regs + NFC_UNLOCKSTART_BLKADDR);
+	writew(0x4000, host->regs + NFC_UNLOCKEND_BLKADDR);
+
+	/* Unlock Block Command for given address range */
+	writew(0x4, host->regs + NFC_WRPROT);
+
+	/* NAND bus width determines access funtions used by upper layer */
+	if (pdata->width == 2) {
+		this->options |= NAND_BUSWIDTH_16;
+		this->ecc.layout = &nand_hw_eccoob_16;
+	}
+
+	host->pagesize_2k = 0;
+
+	/* Scan to find existence of the device */
+	if (nand_scan(mtd, 1)) {
+		DEBUG(MTD_DEBUG_LEVEL0,
+		      "MXC_ND: Unable to find any NAND device.\n");
+		err = -ENXIO;
+		goto escan;
+	}
+
+	/* Register the partitions */
+#ifdef CONFIG_MTD_PARTITIONS
+	nr_parts =
+	    parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
+	if (nr_parts > 0)
+		add_mtd_partitions(mtd, host->parts, nr_parts);
+	else
+#endif
+	{
+		pr_info("Registering %s as whole device\n", mtd->name);
+		add_mtd_device(mtd);
+	}
+
+	platform_set_drvdata(pdev, host);
+
+	return 0;
+
+escan:
+	free_irq(host->irq, NULL);
+eirq:
+	iounmap(host->regs);
+eres:
+	clk_put(host->clk);
+eclk:
+	kfree(host);
+
+	return err;
+}
+
+static int __devexit mxcnd_remove(struct platform_device *pdev)
+{
+	struct mxc_nand_host *host = platform_get_drvdata(pdev);
+
+	clk_put(host->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	nand_release(&host->mtd);
+	free_irq(host->irq, NULL);
+	iounmap(host->regs);
+	kfree(host);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct mtd_info *info = platform_get_drvdata(pdev);
+	int ret = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
+	if (info)
+		ret = info->suspend(info);
+
+	/* Disable the NFC clock */
+	clk_disable(nfc_clk);	/* FIXME */
+
+	return ret;
+}
+
+static int mxcnd_resume(struct platform_device *pdev)
+{
+	struct mtd_info *info = platform_get_drvdata(pdev);
+	int ret = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
+	/* Enable the NFC clock */
+	clk_enable(nfc_clk);	/* FIXME */
+
+	if (info)
+		info->resume(info);
+
+	return ret;
+}
+
+#else
+# define mxcnd_suspend   NULL
+# define mxcnd_resume    NULL
+#endif				/* CONFIG_PM */
+
+static struct platform_driver mxcnd_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   },
+	.remove = __exit_p(mxcnd_remove),
+	.suspend = mxcnd_suspend,
+	.resume = mxcnd_resume,
+};
+
+static int __init mxc_nd_init(void)
+{
+	/* Register the device driver structure. */
+	pr_info("MXC MTD nand Driver\n");
+	if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
+		printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void __exit mxc_nd_cleanup(void)
+{
+	/* Unregister the device structure */
+	platform_driver_unregister(&mxcnd_driver);
+}
+
+module_init(mxc_nd_init);
+module_exit(mxc_nd_cleanup);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MXC NAND MTD driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d1129bae6c27..0a9c9cd33f96 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -801,9 +801,9 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
  * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
- * @dataofs	offset of requested data within the page
- * @readlen	data length
- * @buf:	buffer to store read data
+ * @data_offs:	offset of requested data within the page
+ * @readlen:	data length
+ * @bufpoi:	buffer to store read data
  */
 static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
 {
@@ -2042,7 +2042,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 		return -EINVAL;
 	}
 
-	instr->fail_addr = 0xffffffff;
+	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
 
 	/* Grab the lock and see if the device is available */
 	nand_get_device(chip, mtd, FL_ERASING);
@@ -2318,6 +2318,12 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	/* Select the device */
 	chip->select_chip(mtd, 0);
 
+	/*
+	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
+	 * after power-up
+	 */
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
 	/* Send the command for reading device ID */
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 
@@ -2488,6 +2494,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
 	/* Check for a chip array */
 	for (i = 1; i < maxchips; i++) {
 		chip->select_chip(mtd, i);
+		/* See comment in nand_get_flash_type for reset */
+		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
 		/* Send the command for reading device ID */
 		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 		/* Read manufacturer and device IDs */
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 918a806a8471..868147acce2c 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -1,13 +1,18 @@
 /*
- * This file contains an ECC algorithm from Toshiba that detects and
- * corrects 1 bit errors in a 256 byte block of data.
+ * This file contains an ECC algorithm that detects and corrects 1 bit
+ * errors in a 256 byte block of data.
  *
  * drivers/mtd/nand/nand_ecc.c
  *
- * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
- *                         Toshiba America Electronics Components, Inc.
+ * Copyright © 2008 Koninklijke Philips Electronics NV.
+ *                  Author: Frans Meulenbroeks
  *
- * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ * Completely replaces the previous ECC implementation which was written by:
+ *   Steven J. Hill (sjhill@realitydiluted.com)
+ *   Thomas Gleixner (tglx@linutronix.de)
+ *
+ * Information on how this algorithm works and how it was developed
+ * can be found in Documentation/mtd/nand_ecc.txt
  *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -23,174 +28,475 @@
  * with this file; if not, write to the Free Software Foundation, Inc.,
  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  *
- * As a special exception, if other files instantiate templates or use
- * macros or inline functions from these files, or you compile these
- * files and link them with other works to produce a work based on these
- * files, these files do not by themselves cause the resulting work to be
- * covered by the GNU General Public License. However the source code for
- * these files must still be made available in accordance with section (3)
- * of the GNU General Public License.
- *
- * This exception does not invalidate any other reasons why a work based on
- * this file might be covered by the GNU General Public License.
  */
 
+/*
+ * The STANDALONE macro is useful when running the code outside the kernel
+ * e.g. when running the code in a testbed or a benchmark program.
+ * When STANDALONE is used, the module related macros are commented out
+ * as well as the linux include files.
+ * Instead a private definition of mtd_info is given to satisfy the compiler
+ * (the code does not use mtd_info, so the code does not care)
+ */
+#ifndef STANDALONE
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
+#include <asm/byteorder.h>
+#else
+#include <stdint.h>
+struct mtd_info;
+#define EXPORT_SYMBOL(x)  /* x */
+
+#define MODULE_LICENSE(x)	/* x */
+#define MODULE_AUTHOR(x)	/* x */
+#define MODULE_DESCRIPTION(x)	/* x */
+
+#define printk printf
+#define KERN_ERR		""
+#endif
+
+/*
+ * invparity is a 256 byte table that contains the odd parity
+ * for each byte. So if the number of bits in a byte is even,
+ * the array element is 1, and when the number of bits is odd
+ * the array eleemnt is 0.
+ */
+static const char invparity[256] = {
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+	1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1
+};
+
+/*
+ * bitsperbyte contains the number of bits per byte
+ * this is only used for testing and repairing parity
+ * (a precalculated value slightly improves performance)
+ */
+static const char bitsperbyte[256] = {
+	0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8,
+};
 
 /*
- * Pre-calculated 256-way 1 byte column parity
+ * addressbits is a lookup table to filter out the bits from the xor-ed
+ * ecc data that identify the faulty location.
+ * this is only used for repairing parity
+ * see the comments in nand_correct_data for more details
  */
-static const u_char nand_ecc_precalc_table[] = {
-	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
-	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
-	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
-	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
-	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
-	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
-	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
-	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
-	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
-	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
-	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
-	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
-	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
-	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
-	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
-	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
+static const char addressbits[256] = {
+	0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+	0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+	0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+	0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+	0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+	0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+	0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+	0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+	0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+	0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+	0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+	0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+	0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+	0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+	0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+	0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+	0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+	0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+	0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+	0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+	0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+	0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+	0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+	0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+	0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+	0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+	0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+	0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+	0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+	0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+	0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+	0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f
 };
 
 /**
- * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block
+ * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
+ *			 block
  * @mtd:	MTD block structure
- * @dat:	raw data
- * @ecc_code:	buffer for ECC
+ * @buf:	input buffer with raw data
+ * @code:	output buffer with ECC
  */
-int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
-		       u_char *ecc_code)
+int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+		       unsigned char *code)
 {
-	uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
 	int i;
+	const uint32_t *bp = (uint32_t *)buf;
+	/* 256 or 512 bytes/ecc  */
+	const uint32_t eccsize_mult =
+			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
+	uint32_t cur;		/* current value in buffer */
+	/* rp0..rp15..rp17 are the various accumulated parities (per byte) */
+	uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+	uint32_t rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16;
+	uint32_t uninitialized_var(rp17);	/* to make compiler happy */
+	uint32_t par;		/* the cumulative parity for all data */
+	uint32_t tmppar;	/* the cumulative parity for this iteration;
+				   for rp12, rp14 and rp16 at the end of the
+				   loop */
+
+	par = 0;
+	rp4 = 0;
+	rp6 = 0;
+	rp8 = 0;
+	rp10 = 0;
+	rp12 = 0;
+	rp14 = 0;
+	rp16 = 0;
+
+	/*
+	 * The loop is unrolled a number of times;
+	 * This avoids if statements to decide on which rp value to update
+	 * Also we process the data by longwords.
+	 * Note: passing unaligned data might give a performance penalty.
+	 * It is assumed that the buffers are aligned.
+	 * tmppar is the cumulative sum of this iteration.
+	 * needed for calculating rp12, rp14, rp16 and par
+	 * also used as a performance improvement for rp6, rp8 and rp10
+	 */
+	for (i = 0; i < eccsize_mult << 2; i++) {
+		cur = *bp++;
+		tmppar = cur;
+		rp4 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp6 ^= tmppar;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp8 ^= tmppar;
 
-	/* Initialize variables */
-	reg1 = reg2 = reg3 = 0;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		rp6 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp6 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp10 ^= tmppar;
 
-	/* Build up column parity */
-	for(i = 0; i < 256; i++) {
-		/* Get CP0 - CP5 from table */
-		idx = nand_ecc_precalc_table[*dat++];
-		reg1 ^= (idx & 0x3f);
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		rp6 ^= cur;
+		rp8 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp6 ^= cur;
+		rp8 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		rp8 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp8 ^= cur;
 
-		/* All bit XOR = 1 ? */
-		if (idx & 0x40) {
-			reg3 ^= (uint8_t) i;
-			reg2 ^= ~((uint8_t) i);
-		}
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		rp6 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp6 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+		rp4 ^= cur;
+		cur = *bp++;
+		tmppar ^= cur;
+
+		par ^= tmppar;
+		if ((i & 0x1) == 0)
+			rp12 ^= tmppar;
+		if ((i & 0x2) == 0)
+			rp14 ^= tmppar;
+		if (eccsize_mult == 2 && (i & 0x4) == 0)
+			rp16 ^= tmppar;
 	}
 
-	/* Create non-inverted ECC code from line parity */
-	tmp1  = (reg3 & 0x80) >> 0; /* B7 -> B7 */
-	tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
-	tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
-	tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
-	tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
-	tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
-	tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
-	tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
-
-	tmp2  = (reg3 & 0x08) << 4; /* B3 -> B7 */
-	tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
-	tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
-	tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
-	tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
-	tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
-	tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
-	tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
-
-	/* Calculate final ECC code */
-#ifdef CONFIG_MTD_NAND_ECC_SMC
-	ecc_code[0] = ~tmp2;
-	ecc_code[1] = ~tmp1;
+	/*
+	 * handle the fact that we use longword operations
+	 * we'll bring rp4..rp14..rp16 back to single byte entities by
+	 * shifting and xoring first fold the upper and lower 16 bits,
+	 * then the upper and lower 8 bits.
+	 */
+	rp4 ^= (rp4 >> 16);
+	rp4 ^= (rp4 >> 8);
+	rp4 &= 0xff;
+	rp6 ^= (rp6 >> 16);
+	rp6 ^= (rp6 >> 8);
+	rp6 &= 0xff;
+	rp8 ^= (rp8 >> 16);
+	rp8 ^= (rp8 >> 8);
+	rp8 &= 0xff;
+	rp10 ^= (rp10 >> 16);
+	rp10 ^= (rp10 >> 8);
+	rp10 &= 0xff;
+	rp12 ^= (rp12 >> 16);
+	rp12 ^= (rp12 >> 8);
+	rp12 &= 0xff;
+	rp14 ^= (rp14 >> 16);
+	rp14 ^= (rp14 >> 8);
+	rp14 &= 0xff;
+	if (eccsize_mult == 2) {
+		rp16 ^= (rp16 >> 16);
+		rp16 ^= (rp16 >> 8);
+		rp16 &= 0xff;
+	}
+
+	/*
+	 * we also need to calculate the row parity for rp0..rp3
+	 * This is present in par, because par is now
+	 * rp3 rp3 rp2 rp2 in little endian and
+	 * rp2 rp2 rp3 rp3 in big endian
+	 * as well as
+	 * rp1 rp0 rp1 rp0 in little endian and
+	 * rp0 rp1 rp0 rp1 in big endian
+	 * First calculate rp2 and rp3
+	 */
+#ifdef __BIG_ENDIAN
+	rp2 = (par >> 16);
+	rp2 ^= (rp2 >> 8);
+	rp2 &= 0xff;
+	rp3 = par & 0xffff;
+	rp3 ^= (rp3 >> 8);
+	rp3 &= 0xff;
 #else
-	ecc_code[0] = ~tmp1;
-	ecc_code[1] = ~tmp2;
+	rp3 = (par >> 16);
+	rp3 ^= (rp3 >> 8);
+	rp3 &= 0xff;
+	rp2 = par & 0xffff;
+	rp2 ^= (rp2 >> 8);
+	rp2 &= 0xff;
 #endif
-	ecc_code[2] = ((~reg1) << 2) | 0x03;
 
-	return 0;
-}
-EXPORT_SYMBOL(nand_calculate_ecc);
+	/* reduce par to 16 bits then calculate rp1 and rp0 */
+	par ^= (par >> 16);
+#ifdef __BIG_ENDIAN
+	rp0 = (par >> 8) & 0xff;
+	rp1 = (par & 0xff);
+#else
+	rp1 = (par >> 8) & 0xff;
+	rp0 = (par & 0xff);
+#endif
 
-static inline int countbits(uint32_t byte)
-{
-	int res = 0;
+	/* finally reduce par to 8 bits */
+	par ^= (par >> 8);
+	par &= 0xff;
 
-	for (;byte; byte >>= 1)
-		res += byte & 0x01;
-	return res;
+	/*
+	 * and calculate rp5..rp15..rp17
+	 * note that par = rp4 ^ rp5 and due to the commutative property
+	 * of the ^ operator we can say:
+	 * rp5 = (par ^ rp4);
+	 * The & 0xff seems superfluous, but benchmarking learned that
+	 * leaving it out gives slightly worse results. No idea why, probably
+	 * it has to do with the way the pipeline in pentium is organized.
+	 */
+	rp5 = (par ^ rp4) & 0xff;
+	rp7 = (par ^ rp6) & 0xff;
+	rp9 = (par ^ rp8) & 0xff;
+	rp11 = (par ^ rp10) & 0xff;
+	rp13 = (par ^ rp12) & 0xff;
+	rp15 = (par ^ rp14) & 0xff;
+	if (eccsize_mult == 2)
+		rp17 = (par ^ rp16) & 0xff;
+
+	/*
+	 * Finally calculate the ecc bits.
+	 * Again here it might seem that there are performance optimisations
+	 * possible, but benchmarks showed that on the system this is developed
+	 * the code below is the fastest
+	 */
+#ifdef CONFIG_MTD_NAND_ECC_SMC
+	code[0] =
+	    (invparity[rp7] << 7) |
+	    (invparity[rp6] << 6) |
+	    (invparity[rp5] << 5) |
+	    (invparity[rp4] << 4) |
+	    (invparity[rp3] << 3) |
+	    (invparity[rp2] << 2) |
+	    (invparity[rp1] << 1) |
+	    (invparity[rp0]);
+	code[1] =
+	    (invparity[rp15] << 7) |
+	    (invparity[rp14] << 6) |
+	    (invparity[rp13] << 5) |
+	    (invparity[rp12] << 4) |
+	    (invparity[rp11] << 3) |
+	    (invparity[rp10] << 2) |
+	    (invparity[rp9] << 1)  |
+	    (invparity[rp8]);
+#else
+	code[1] =
+	    (invparity[rp7] << 7) |
+	    (invparity[rp6] << 6) |
+	    (invparity[rp5] << 5) |
+	    (invparity[rp4] << 4) |
+	    (invparity[rp3] << 3) |
+	    (invparity[rp2] << 2) |
+	    (invparity[rp1] << 1) |
+	    (invparity[rp0]);
+	code[0] =
+	    (invparity[rp15] << 7) |
+	    (invparity[rp14] << 6) |
+	    (invparity[rp13] << 5) |
+	    (invparity[rp12] << 4) |
+	    (invparity[rp11] << 3) |
+	    (invparity[rp10] << 2) |
+	    (invparity[rp9] << 1)  |
+	    (invparity[rp8]);
+#endif
+	if (eccsize_mult == 1)
+		code[2] =
+		    (invparity[par & 0xf0] << 7) |
+		    (invparity[par & 0x0f] << 6) |
+		    (invparity[par & 0xcc] << 5) |
+		    (invparity[par & 0x33] << 4) |
+		    (invparity[par & 0xaa] << 3) |
+		    (invparity[par & 0x55] << 2) |
+		    3;
+	else
+		code[2] =
+		    (invparity[par & 0xf0] << 7) |
+		    (invparity[par & 0x0f] << 6) |
+		    (invparity[par & 0xcc] << 5) |
+		    (invparity[par & 0x33] << 4) |
+		    (invparity[par & 0xaa] << 3) |
+		    (invparity[par & 0x55] << 2) |
+		    (invparity[rp17] << 1) |
+		    (invparity[rp16] << 0);
+	return 0;
 }
+EXPORT_SYMBOL(nand_calculate_ecc);
 
 /**
  * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
  * @mtd:	MTD block structure
- * @dat:	raw data read from the chip
+ * @buf:	raw data read from the chip
  * @read_ecc:	ECC from the chip
  * @calc_ecc:	the ECC calculated from raw data
  *
- * Detect and correct a 1 bit error for 256 byte block
+ * Detect and correct a 1 bit error for 256/512 byte block
  */
-int nand_correct_data(struct mtd_info *mtd, u_char *dat,
-		      u_char *read_ecc, u_char *calc_ecc)
+int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+		      unsigned char *read_ecc, unsigned char *calc_ecc)
 {
-	uint8_t s0, s1, s2;
+	unsigned char b0, b1, b2;
+	unsigned char byte_addr, bit_addr;
+	/* 256 or 512 bytes/ecc  */
+	const uint32_t eccsize_mult =
+			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
 
+	/*
+	 * b0 to b2 indicate which bit is faulty (if any)
+	 * we might need the xor result  more than once,
+	 * so keep them in a local var
+	*/
 #ifdef CONFIG_MTD_NAND_ECC_SMC
-	s0 = calc_ecc[0] ^ read_ecc[0];
-	s1 = calc_ecc[1] ^ read_ecc[1];
-	s2 = calc_ecc[2] ^ read_ecc[2];
+	b0 = read_ecc[0] ^ calc_ecc[0];
+	b1 = read_ecc[1] ^ calc_ecc[1];
 #else
-	s1 = calc_ecc[0] ^ read_ecc[0];
-	s0 = calc_ecc[1] ^ read_ecc[1];
-	s2 = calc_ecc[2] ^ read_ecc[2];
+	b0 = read_ecc[1] ^ calc_ecc[1];
+	b1 = read_ecc[0] ^ calc_ecc[0];
 #endif
-	if ((s0 | s1 | s2) == 0)
-		return 0;
-
-	/* Check for a single bit error */
-	if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
-	    ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
-	    ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
+	b2 = read_ecc[2] ^ calc_ecc[2];
 
-		uint32_t byteoffs, bitnum;
+	/* check if there are any bitfaults */
 
-		byteoffs = (s1 << 0) & 0x80;
-		byteoffs |= (s1 << 1) & 0x40;
-		byteoffs |= (s1 << 2) & 0x20;
-		byteoffs |= (s1 << 3) & 0x10;
+	/* repeated if statements are slightly more efficient than switch ... */
+	/* ordered in order of likelihood */
 
-		byteoffs |= (s0 >> 4) & 0x08;
-		byteoffs |= (s0 >> 3) & 0x04;
-		byteoffs |= (s0 >> 2) & 0x02;
-		byteoffs |= (s0 >> 1) & 0x01;
-
-		bitnum = (s2 >> 5) & 0x04;
-		bitnum |= (s2 >> 4) & 0x02;
-		bitnum |= (s2 >> 3) & 0x01;
-
-		dat[byteoffs] ^= (1 << bitnum);
+	if ((b0 | b1 | b2) == 0)
+		return 0;	/* no error */
 
+	if ((((b0 ^ (b0 >> 1)) & 0x55) == 0x55) &&
+	    (((b1 ^ (b1 >> 1)) & 0x55) == 0x55) &&
+	    ((eccsize_mult == 1 && ((b2 ^ (b2 >> 1)) & 0x54) == 0x54) ||
+	     (eccsize_mult == 2 && ((b2 ^ (b2 >> 1)) & 0x55) == 0x55))) {
+	/* single bit error */
+		/*
+		 * rp17/rp15/13/11/9/7/5/3/1 indicate which byte is the faulty
+		 * byte, cp 5/3/1 indicate the faulty bit.
+		 * A lookup table (called addressbits) is used to filter
+		 * the bits from the byte they are in.
+		 * A marginal optimisation is possible by having three
+		 * different lookup tables.
+		 * One as we have now (for b0), one for b2
+		 * (that would avoid the >> 1), and one for b1 (with all values
+		 * << 4). However it was felt that introducing two more tables
+		 * hardly justify the gain.
+		 *
+		 * The b2 shift is there to get rid of the lowest two bits.
+		 * We could also do addressbits[b2] >> 1 but for the
+		 * performace it does not make any difference
+		 */
+		if (eccsize_mult == 1)
+			byte_addr = (addressbits[b1] << 4) + addressbits[b0];
+		else
+			byte_addr = (addressbits[b2 & 0x3] << 8) +
+				    (addressbits[b1] << 4) + addressbits[b0];
+		bit_addr = addressbits[b2 >> 2];
+		/* flip the bit */
+		buf[byte_addr] ^= (1 << bit_addr);
 		return 1;
-	}
 
-	if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
-		return 1;
+	}
+	/* count nr of bits; use table lookup, faster than calculating it */
+	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+		return 1;	/* error in ecc data; no action needed */
 
-	return -EBADMSG;
+	printk(KERN_ERR "uncorrectable error : ");
+	return -1;
 }
 EXPORT_SYMBOL(nand_correct_data);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Frans Meulenbroeks <fransmeulenbroeks@gmail.com>");
 MODULE_DESCRIPTION("Generic NAND ECC support");
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 556e8131ecdc..ae7c57781a68 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -38,7 +38,6 @@
 #include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/random.h>
-#include <asm/div64.h>
 
 /* Default simulator parameters values */
 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index a64ad15b8fdd..c0fa9c9edf08 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -115,55 +115,11 @@ enum {
 	STATE_PIO_WRITING,
 };
 
-struct pxa3xx_nand_timing {
-	unsigned int	tCH;  /* Enable signal hold time */
-	unsigned int	tCS;  /* Enable signal setup time */
-	unsigned int	tWH;  /* ND_nWE high duration */
-	unsigned int	tWP;  /* ND_nWE pulse time */
-	unsigned int	tRH;  /* ND_nRE high duration */
-	unsigned int	tRP;  /* ND_nRE pulse width */
-	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
-	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
-	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
-	uint16_t	read1;
-	uint16_t	read2;
-	uint16_t	program;
-	uint16_t	read_status;
-	uint16_t	read_id;
-	uint16_t	erase;
-	uint16_t	reset;
-	uint16_t	lock;
-	uint16_t	unlock;
-	uint16_t	lock_status;
-};
-
-struct pxa3xx_nand_flash {
-	struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
-	struct pxa3xx_nand_cmdset *cmdset;
-
-	uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
-	uint32_t page_size;	/* Page size in bytes (PAGE_SZ) */
-	uint32_t flash_width;	/* Width of Flash memory (DWIDTH_M) */
-	uint32_t dfc_width;	/* Width of flash controller(DWIDTH_C) */
-	uint32_t num_blocks;	/* Number of physical blocks in Flash */
-	uint32_t chip_id;
-
-	/* NOTE: these are automatically calculated, do not define */
-	size_t		oob_size;
-	size_t		read_id_bytes;
-
-	unsigned int	col_addr_cycles;
-	unsigned int	row_addr_cycles;
-};
-
 struct pxa3xx_nand_info {
 	struct nand_chip	nand_chip;
 
 	struct platform_device	 *pdev;
-	struct pxa3xx_nand_flash *flash_info;
+	const struct pxa3xx_nand_flash *flash_info;
 
 	struct clk		*clk;
 	void __iomem		*mmio_base;
@@ -202,12 +158,20 @@ struct pxa3xx_nand_info {
 	uint32_t		ndcb0;
 	uint32_t		ndcb1;
 	uint32_t		ndcb2;
+
+	/* calculated from pxa3xx_nand_flash data */
+	size_t		oob_size;
+	size_t		read_id_bytes;
+
+	unsigned int	col_addr_cycles;
+	unsigned int	row_addr_cycles;
 };
 
 static int use_dma = 1;
 module_param(use_dma, bool, 0444);
 MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
 
+#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
 static struct pxa3xx_nand_cmdset smallpage_cmdset = {
 	.read1		= 0x0000,
 	.read2		= 0x0050,
@@ -291,11 +255,35 @@ static struct pxa3xx_nand_flash micron1GbX16 = {
 	.chip_id	= 0xb12c,
 };
 
+static struct pxa3xx_nand_timing stm2GbX16_timing = {
+	.tCH = 10,
+	.tCS = 35,
+	.tWH = 15,
+	.tWP = 25,
+	.tRH = 15,
+	.tRP = 25,
+	.tR = 25000,
+	.tWHR = 60,
+	.tAR = 10,
+};
+
+static struct pxa3xx_nand_flash stm2GbX16 = {
+	.timing = &stm2GbX16_timing,
+	.page_per_block = 64,
+	.page_size = 2048,
+	.flash_width = 16,
+	.dfc_width = 16,
+	.num_blocks = 2048,
+	.chip_id = 0xba20,
+};
+
 static struct pxa3xx_nand_flash *builtin_flash_types[] = {
 	&samsung512MbX16,
 	&micron1GbX8,
 	&micron1GbX16,
+	&stm2GbX16,
 };
+#endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
 
 #define NDTR0_tCH(c)	(min((c), 7) << 19)
 #define NDTR0_tCS(c)	(min((c), 7) << 16)
@@ -312,7 +300,7 @@ static struct pxa3xx_nand_flash *builtin_flash_types[] = {
 #define ns2cycle(ns, clk)	(int)(((ns) * (clk / 1000000) / 1000) + 1)
 
 static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
-				   struct pxa3xx_nand_timing *t)
+				   const struct pxa3xx_nand_timing *t)
 {
 	unsigned long nand_clk = clk_get_rate(info->clk);
 	uint32_t ndtr0, ndtr1;
@@ -354,8 +342,8 @@ static int wait_for_event(struct pxa3xx_nand_info *info, uint32_t event)
 static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
 			uint16_t cmd, int column, int page_addr)
 {
-	struct pxa3xx_nand_flash *f = info->flash_info;
-	struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
+	const struct pxa3xx_nand_flash *f = info->flash_info;
+	const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
 
 	/* calculate data size */
 	switch (f->page_size) {
@@ -373,14 +361,14 @@ static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
 	info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
 	info->ndcb1 = 0;
 	info->ndcb2 = 0;
-	info->ndcb0 |= NDCB0_ADDR_CYC(f->row_addr_cycles + f->col_addr_cycles);
+	info->ndcb0 |= NDCB0_ADDR_CYC(info->row_addr_cycles + info->col_addr_cycles);
 
-	if (f->col_addr_cycles == 2) {
+	if (info->col_addr_cycles == 2) {
 		/* large block, 2 cycles for column address
 		 * row address starts from 3rd cycle
 		 */
 		info->ndcb1 |= (page_addr << 16) | (column & 0xffff);
-		if (f->row_addr_cycles == 3)
+		if (info->row_addr_cycles == 3)
 			info->ndcb2 = (page_addr >> 16) & 0xff;
 	} else
 		/* small block, 1 cycles for column address
@@ -406,7 +394,7 @@ static int prepare_erase_cmd(struct pxa3xx_nand_info *info,
 
 static int prepare_other_cmd(struct pxa3xx_nand_info *info, uint16_t cmd)
 {
-	struct pxa3xx_nand_cmdset *cmdset = info->flash_info->cmdset;
+	const struct pxa3xx_nand_cmdset *cmdset = info->flash_info->cmdset;
 
 	info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
 	info->ndcb1 = 0;
@@ -641,8 +629,8 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 				int column, int page_addr)
 {
 	struct pxa3xx_nand_info *info = mtd->priv;
-	struct pxa3xx_nand_flash *flash_info = info->flash_info;
-	struct pxa3xx_nand_cmdset *cmdset = flash_info->cmdset;
+	const struct pxa3xx_nand_flash *flash_info = info->flash_info;
+	const struct pxa3xx_nand_cmdset *cmdset = flash_info->cmdset;
 	int ret;
 
 	info->use_dma = (use_dma) ? 1 : 0;
@@ -720,7 +708,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 		info->use_dma = 0;	/* force PIO read */
 		info->buf_start = 0;
 		info->buf_count = (command == NAND_CMD_READID) ?
-				flash_info->read_id_bytes : 1;
+				info->read_id_bytes : 1;
 
 		if (prepare_other_cmd(info, (command == NAND_CMD_READID) ?
 				cmdset->read_id : cmdset->read_status))
@@ -861,8 +849,8 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
 
 static int __readid(struct pxa3xx_nand_info *info, uint32_t *id)
 {
-	struct pxa3xx_nand_flash *f = info->flash_info;
-	struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
+	const struct pxa3xx_nand_flash *f = info->flash_info;
+	const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
 	uint32_t ndcr;
 	uint8_t  id_buff[8];
 
@@ -891,7 +879,7 @@ fail_timeout:
 }
 
 static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
-				    struct pxa3xx_nand_flash *f)
+				    const struct pxa3xx_nand_flash *f)
 {
 	struct platform_device *pdev = info->pdev;
 	struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
@@ -904,25 +892,25 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 		return -EINVAL;
 
 	/* calculate flash information */
-	f->oob_size = (f->page_size == 2048) ? 64 : 16;
-	f->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
+	info->oob_size = (f->page_size == 2048) ? 64 : 16;
+	info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
 
 	/* calculate addressing information */
-	f->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
+	info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
 
 	if (f->num_blocks * f->page_per_block > 65536)
-		f->row_addr_cycles = 3;
+		info->row_addr_cycles = 3;
 	else
-		f->row_addr_cycles = 2;
+		info->row_addr_cycles = 2;
 
 	ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
-	ndcr |= (f->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+	ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
 	ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
 	ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
 	ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
 	ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
 
-	ndcr |= NDCR_RD_ID_CNT(f->read_id_bytes);
+	ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
 	ndcr |= NDCR_SPARE_EN; /* enable spare by default */
 
 	info->reg_ndcr = ndcr;
@@ -932,12 +920,27 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 	return 0;
 }
 
-static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
+				    const struct pxa3xx_nand_platform_data *pdata)
 {
-	struct pxa3xx_nand_flash *f;
-	uint32_t id;
+	const struct pxa3xx_nand_flash *f;
+	uint32_t id = -1;
 	int i;
 
+	for (i = 0; i<pdata->num_flash; ++i) {
+		f = pdata->flash + i;
+
+		if (pxa3xx_nand_config_flash(info, f))
+			continue;
+
+		if (__readid(info, &id))
+			continue;
+
+		if (id == f->chip_id)
+			return 0;
+	}
+
+#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
 	for (i = 0; i < ARRAY_SIZE(builtin_flash_types); i++) {
 
 		f = builtin_flash_types[i];
@@ -951,7 +954,11 @@ static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info)
 		if (id == f->chip_id)
 			return 0;
 	}
+#endif
 
+	dev_warn(&info->pdev->dev,
+		 "failed to detect configured nand flash; found %04x instead of\n",
+		 id);
 	return -ENODEV;
 }
 
@@ -1014,7 +1021,7 @@ static struct nand_ecclayout hw_largepage_ecclayout = {
 static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
 				 struct pxa3xx_nand_info *info)
 {
-	struct pxa3xx_nand_flash *f = info->flash_info;
+	const struct pxa3xx_nand_flash *f = info->flash_info;
 	struct nand_chip *this = &info->nand_chip;
 
 	this->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16: 0;
@@ -1135,7 +1142,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
 		goto fail_free_buf;
 	}
 
-	ret = pxa3xx_nand_detect_flash(info);
+	ret = pxa3xx_nand_detect_flash(info, pdata);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to detect flash\n");
 		ret = -ENODEV;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
new file mode 100644
index 000000000000..821acb08ff1c
--- /dev/null
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -0,0 +1,878 @@
+/*
+ * SuperH FLCTL nand controller
+ *
+ * Copyright © 2008 Renesas Solutions Corp.
+ * Copyright © 2008 Atom Create Engineering Co., Ltd.
+ *
+ * Based on fsl_elbc_nand.c, Copyright © 2006-2007 Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/sh_flctl.h>
+
+static struct nand_ecclayout flctl_4secc_oob_16 = {
+	.eccbytes = 10,
+	.eccpos = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.oobfree = {
+		{.offset = 12,
+		. length = 4} },
+};
+
+static struct nand_ecclayout flctl_4secc_oob_64 = {
+	.eccbytes = 10,
+	.eccpos = {48, 49, 50, 51, 52, 53, 54, 55, 56, 57},
+	.oobfree = {
+		{.offset = 60,
+		. length = 4} },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr flctl_4secc_smallpage = {
+	.options = NAND_BBT_SCAN2NDPAGE,
+	.offs = 11,
+	.len = 1,
+	.pattern = scan_ff_pattern,
+};
+
+static struct nand_bbt_descr flctl_4secc_largepage = {
+	.options = 0,
+	.offs = 58,
+	.len = 2,
+	.pattern = scan_ff_pattern,
+};
+
+static void empty_fifo(struct sh_flctl *flctl)
+{
+	writel(0x000c0000, FLINTDMACR(flctl));	/* FIFO Clear */
+	writel(0x00000000, FLINTDMACR(flctl));	/* Clear Error flags */
+}
+
+static void start_translation(struct sh_flctl *flctl)
+{
+	writeb(TRSTRT, FLTRCR(flctl));
+}
+
+static void wait_completion(struct sh_flctl *flctl)
+{
+	uint32_t timeout = LOOP_TIMEOUT_MAX;
+
+	while (timeout--) {
+		if (readb(FLTRCR(flctl)) & TREND) {
+			writeb(0x0, FLTRCR(flctl));
+			return;
+		}
+		udelay(1);
+	}
+
+	printk(KERN_ERR "wait_completion(): Timeout occured \n");
+	writeb(0x0, FLTRCR(flctl));
+}
+
+static void set_addr(struct mtd_info *mtd, int column, int page_addr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint32_t addr = 0;
+
+	if (column == -1) {
+		addr = page_addr;	/* ERASE1 */
+	} else if (page_addr != -1) {
+		/* SEQIN, READ0, etc.. */
+		if (flctl->page_size) {
+			addr = column & 0x0FFF;
+			addr |= (page_addr & 0xff) << 16;
+			addr |= ((page_addr >> 8) & 0xff) << 24;
+			/* big than 128MB */
+			if (flctl->rw_ADRCNT == ADRCNT2_E) {
+				uint32_t 	addr2;
+				addr2 = (page_addr >> 16) & 0xff;
+				writel(addr2, FLADR2(flctl));
+			}
+		} else {
+			addr = column;
+			addr |= (page_addr & 0xff) << 8;
+			addr |= ((page_addr >> 8) & 0xff) << 16;
+			addr |= ((page_addr >> 16) & 0xff) << 24;
+		}
+	}
+	writel(addr, FLADR(flctl));
+}
+
+static void wait_rfifo_ready(struct sh_flctl *flctl)
+{
+	uint32_t timeout = LOOP_TIMEOUT_MAX;
+
+	while (timeout--) {
+		uint32_t val;
+		/* check FIFO */
+		val = readl(FLDTCNTR(flctl)) >> 16;
+		if (val & 0xFF)
+			return;
+		udelay(1);
+	}
+	printk(KERN_ERR "wait_rfifo_ready(): Timeout occured \n");
+}
+
+static void wait_wfifo_ready(struct sh_flctl *flctl)
+{
+	uint32_t len, timeout = LOOP_TIMEOUT_MAX;
+
+	while (timeout--) {
+		/* check FIFO */
+		len = (readl(FLDTCNTR(flctl)) >> 16) & 0xFF;
+		if (len >= 4)
+			return;
+		udelay(1);
+	}
+	printk(KERN_ERR "wait_wfifo_ready(): Timeout occured \n");
+}
+
+static int wait_recfifo_ready(struct sh_flctl *flctl)
+{
+	uint32_t timeout = LOOP_TIMEOUT_MAX;
+	int checked[4];
+	void __iomem *ecc_reg[4];
+	int i;
+	uint32_t data, size;
+
+	memset(checked, 0, sizeof(checked));
+
+	while (timeout--) {
+		size = readl(FLDTCNTR(flctl)) >> 24;
+		if (size & 0xFF)
+			return 0;	/* success */
+
+		if (readl(FL4ECCCR(flctl)) & _4ECCFA)
+			return 1;	/* can't correct */
+
+		udelay(1);
+		if (!(readl(FL4ECCCR(flctl)) & _4ECCEND))
+			continue;
+
+		/* start error correction */
+		ecc_reg[0] = FL4ECCRESULT0(flctl);
+		ecc_reg[1] = FL4ECCRESULT1(flctl);
+		ecc_reg[2] = FL4ECCRESULT2(flctl);
+		ecc_reg[3] = FL4ECCRESULT3(flctl);
+
+		for (i = 0; i < 3; i++) {
+			data = readl(ecc_reg[i]);
+			if (data != INIT_FL4ECCRESULT_VAL && !checked[i]) {
+				uint8_t org;
+				int index;
+
+				index = data >> 16;
+				org = flctl->done_buff[index];
+				flctl->done_buff[index] = org ^ (data & 0xFF);
+				checked[i] = 1;
+			}
+		}
+
+		writel(0, FL4ECCCR(flctl));
+	}
+
+	printk(KERN_ERR "wait_recfifo_ready(): Timeout occured \n");
+	return 1;	/* timeout */
+}
+
+static void wait_wecfifo_ready(struct sh_flctl *flctl)
+{
+	uint32_t timeout = LOOP_TIMEOUT_MAX;
+	uint32_t len;
+
+	while (timeout--) {
+		/* check FLECFIFO */
+		len = (readl(FLDTCNTR(flctl)) >> 24) & 0xFF;
+		if (len >= 4)
+			return;
+		udelay(1);
+	}
+	printk(KERN_ERR "wait_wecfifo_ready(): Timeout occured \n");
+}
+
+static void read_datareg(struct sh_flctl *flctl, int offset)
+{
+	unsigned long data;
+	unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+
+	wait_completion(flctl);
+
+	data = readl(FLDATAR(flctl));
+	*buf = le32_to_cpu(data);
+}
+
+static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+{
+	int i, len_4align;
+	unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+	void *fifo_addr = (void *)FLDTFIFO(flctl);
+
+	len_4align = (rlen + 3) / 4;
+
+	for (i = 0; i < len_4align; i++) {
+		wait_rfifo_ready(flctl);
+		buf[i] = readl(fifo_addr);
+		buf[i] = be32_to_cpu(buf[i]);
+	}
+}
+
+static int read_ecfiforeg(struct sh_flctl *flctl, uint8_t *buff)
+{
+	int i;
+	unsigned long *ecc_buf = (unsigned long *)buff;
+	void *fifo_addr = (void *)FLECFIFO(flctl);
+
+	for (i = 0; i < 4; i++) {
+		if (wait_recfifo_ready(flctl))
+			return 1;
+		ecc_buf[i] = readl(fifo_addr);
+		ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+	}
+
+	return 0;
+}
+
+static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+{
+	int i, len_4align;
+	unsigned long *data = (unsigned long *)&flctl->done_buff[offset];
+	void *fifo_addr = (void *)FLDTFIFO(flctl);
+
+	len_4align = (rlen + 3) / 4;
+	for (i = 0; i < len_4align; i++) {
+		wait_wfifo_ready(flctl);
+		writel(cpu_to_be32(data[i]), fifo_addr);
+	}
+}
+
+static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+	uint32_t flcmdcr_val, addr_len_bytes = 0;
+
+	/* Set SNAND bit if page size is 2048byte */
+	if (flctl->page_size)
+		flcmncr_val |= SNAND_E;
+	else
+		flcmncr_val &= ~SNAND_E;
+
+	/* default FLCMDCR val */
+	flcmdcr_val = DOCMD1_E | DOADR_E;
+
+	/* Set for FLCMDCR */
+	switch (cmd) {
+	case NAND_CMD_ERASE1:
+		addr_len_bytes = flctl->erase_ADRCNT;
+		flcmdcr_val |= DOCMD2_E;
+		break;
+	case NAND_CMD_READ0:
+	case NAND_CMD_READOOB:
+		addr_len_bytes = flctl->rw_ADRCNT;
+		flcmdcr_val |= CDSRC_E;
+		break;
+	case NAND_CMD_SEQIN:
+		/* This case is that cmd is READ0 or READ1 or READ00 */
+		flcmdcr_val &= ~DOADR_E;	/* ONLY execute 1st cmd */
+		break;
+	case NAND_CMD_PAGEPROG:
+		addr_len_bytes = flctl->rw_ADRCNT;
+		flcmdcr_val |= DOCMD2_E | CDSRC_E | SELRW;
+		break;
+	case NAND_CMD_READID:
+		flcmncr_val &= ~SNAND_E;
+		addr_len_bytes = ADRCNT_1;
+		break;
+	case NAND_CMD_STATUS:
+	case NAND_CMD_RESET:
+		flcmncr_val &= ~SNAND_E;
+		flcmdcr_val &= ~(DOADR_E | DOSR_E);
+		break;
+	default:
+		break;
+	}
+
+	/* Set address bytes parameter */
+	flcmdcr_val |= addr_len_bytes;
+
+	/* Now actually write */
+	writel(flcmncr_val, FLCMNCR(flctl));
+	writel(flcmdcr_val, FLCMDCR(flctl));
+	writel(flcmcdr_val, FLCMCDR(flctl));
+}
+
+static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+		chip->read_buf(mtd, p, eccsize);
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		if (flctl->hwecc_cant_correct[i])
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += 0;
+	}
+
+	return 0;
+}
+
+static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				   const uint8_t *buf)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	const uint8_t *p = buf;
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+		chip->write_buf(mtd, p, eccsize);
+}
+
+static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int sector, page_sectors;
+
+	if (flctl->page_size)
+		page_sectors = 4;
+	else
+		page_sectors = 1;
+
+	writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
+		 FLCMNCR(flctl));
+
+	set_cmd_regs(mtd, NAND_CMD_READ0,
+		(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+
+	for (sector = 0; sector < page_sectors; sector++) {
+		int ret;
+
+		empty_fifo(flctl);
+		writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
+		writel(page_addr << 2 | sector, FLADR(flctl));
+
+		start_translation(flctl);
+		read_fiforeg(flctl, 512, 512 * sector);
+
+		ret = read_ecfiforeg(flctl,
+			&flctl->done_buff[mtd->writesize + 16 * sector]);
+
+		if (ret)
+			flctl->hwecc_cant_correct[sector] = 1;
+
+		writel(0x0, FL4ECCCR(flctl));
+		wait_completion(flctl);
+	}
+	writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
+			FLCMNCR(flctl));
+}
+
+static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+
+	set_cmd_regs(mtd, NAND_CMD_READ0,
+		(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+
+	empty_fifo(flctl);
+	if (flctl->page_size) {
+		int i;
+		/* In case that the page size is 2k */
+		for (i = 0; i < 16 * 3; i++)
+			flctl->done_buff[i] = 0xFF;
+
+		set_addr(mtd, 3 * 528 + 512, page_addr);
+		writel(16, FLDTCNTR(flctl));
+
+		start_translation(flctl);
+		read_fiforeg(flctl, 16, 16 * 3);
+		wait_completion(flctl);
+	} else {
+		/* In case that the page size is 512b */
+		set_addr(mtd, 512, page_addr);
+		writel(16, FLDTCNTR(flctl));
+
+		start_translation(flctl);
+		read_fiforeg(flctl, 16, 0);
+		wait_completion(flctl);
+	}
+}
+
+static void execmd_write_page_sector(struct mtd_info *mtd)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int i, page_addr = flctl->seqin_page_addr;
+	int sector, page_sectors;
+
+	if (flctl->page_size)
+		page_sectors = 4;
+	else
+		page_sectors = 1;
+
+	writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+
+	set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
+			(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
+
+	for (sector = 0; sector < page_sectors; sector++) {
+		empty_fifo(flctl);
+		writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
+		writel(page_addr << 2 | sector, FLADR(flctl));
+
+		start_translation(flctl);
+		write_fiforeg(flctl, 512, 512 * sector);
+
+		for (i = 0; i < 4; i++) {
+			wait_wecfifo_ready(flctl); /* wait for write ready */
+			writel(0xFFFFFFFF, FLECFIFO(flctl));
+		}
+		wait_completion(flctl);
+	}
+
+	writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
+}
+
+static void execmd_write_oob(struct mtd_info *mtd)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int page_addr = flctl->seqin_page_addr;
+	int sector, page_sectors;
+
+	if (flctl->page_size) {
+		sector = 3;
+		page_sectors = 4;
+	} else {
+		sector = 0;
+		page_sectors = 1;
+	}
+
+	set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
+			(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
+
+	for (; sector < page_sectors; sector++) {
+		empty_fifo(flctl);
+		set_addr(mtd, sector * 528 + 512, page_addr);
+		writel(16, FLDTCNTR(flctl));	/* set read size */
+
+		start_translation(flctl);
+		write_fiforeg(flctl, 16, 16 * sector);
+		wait_completion(flctl);
+	}
+}
+
+static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
+			int column, int page_addr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint32_t read_cmd = 0;
+
+	flctl->read_bytes = 0;
+	if (command != NAND_CMD_PAGEPROG)
+		flctl->index = 0;
+
+	switch (command) {
+	case NAND_CMD_READ1:
+	case NAND_CMD_READ0:
+		if (flctl->hwecc) {
+			/* read page with hwecc */
+			execmd_read_page_sector(mtd, page_addr);
+			break;
+		}
+		empty_fifo(flctl);
+		if (flctl->page_size)
+			set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
+				| command);
+		else
+			set_cmd_regs(mtd, command, command);
+
+		set_addr(mtd, 0, page_addr);
+
+		flctl->read_bytes = mtd->writesize + mtd->oobsize;
+		flctl->index += column;
+		goto read_normal_exit;
+
+	case NAND_CMD_READOOB:
+		if (flctl->hwecc) {
+			/* read page with hwecc */
+			execmd_read_oob(mtd, page_addr);
+			break;
+		}
+
+		empty_fifo(flctl);
+		if (flctl->page_size) {
+			set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
+				| NAND_CMD_READ0);
+			set_addr(mtd, mtd->writesize, page_addr);
+		} else {
+			set_cmd_regs(mtd, command, command);
+			set_addr(mtd, 0, page_addr);
+		}
+		flctl->read_bytes = mtd->oobsize;
+		goto read_normal_exit;
+
+	case NAND_CMD_READID:
+		empty_fifo(flctl);
+		set_cmd_regs(mtd, command, command);
+		set_addr(mtd, 0, 0);
+
+		flctl->read_bytes = 4;
+		writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+		start_translation(flctl);
+		read_datareg(flctl, 0);	/* read and end */
+		break;
+
+	case NAND_CMD_ERASE1:
+		flctl->erase1_page_addr = page_addr;
+		break;
+
+	case NAND_CMD_ERASE2:
+		set_cmd_regs(mtd, NAND_CMD_ERASE1,
+			(command << 8) | NAND_CMD_ERASE1);
+		set_addr(mtd, -1, flctl->erase1_page_addr);
+		start_translation(flctl);
+		wait_completion(flctl);
+		break;
+
+	case NAND_CMD_SEQIN:
+		if (!flctl->page_size) {
+			/* output read command */
+			if (column >= mtd->writesize) {
+				column -= mtd->writesize;
+				read_cmd = NAND_CMD_READOOB;
+			} else if (column < 256) {
+				read_cmd = NAND_CMD_READ0;
+			} else {
+				column -= 256;
+				read_cmd = NAND_CMD_READ1;
+			}
+		}
+		flctl->seqin_column = column;
+		flctl->seqin_page_addr = page_addr;
+		flctl->seqin_read_cmd = read_cmd;
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		empty_fifo(flctl);
+		if (!flctl->page_size) {
+			set_cmd_regs(mtd, NAND_CMD_SEQIN,
+					flctl->seqin_read_cmd);
+			set_addr(mtd, -1, -1);
+			writel(0, FLDTCNTR(flctl));	/* set 0 size */
+			start_translation(flctl);
+			wait_completion(flctl);
+		}
+		if (flctl->hwecc) {
+			/* write page with hwecc */
+			if (flctl->seqin_column == mtd->writesize)
+				execmd_write_oob(mtd);
+			else if (!flctl->seqin_column)
+				execmd_write_page_sector(mtd);
+			else
+				printk(KERN_ERR "Invalid address !?\n");
+			break;
+		}
+		set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
+		set_addr(mtd, flctl->seqin_column, flctl->seqin_page_addr);
+		writel(flctl->index, FLDTCNTR(flctl));	/* set write size */
+		start_translation(flctl);
+		write_fiforeg(flctl, flctl->index, 0);
+		wait_completion(flctl);
+		break;
+
+	case NAND_CMD_STATUS:
+		set_cmd_regs(mtd, command, command);
+		set_addr(mtd, -1, -1);
+
+		flctl->read_bytes = 1;
+		writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+		start_translation(flctl);
+		read_datareg(flctl, 0); /* read and end */
+		break;
+
+	case NAND_CMD_RESET:
+		set_cmd_regs(mtd, command, command);
+		set_addr(mtd, -1, -1);
+
+		writel(0, FLDTCNTR(flctl));	/* set 0 size */
+		start_translation(flctl);
+		wait_completion(flctl);
+		break;
+
+	default:
+		break;
+	}
+	return;
+
+read_normal_exit:
+	writel(flctl->read_bytes, FLDTCNTR(flctl));	/* set read size */
+	start_translation(flctl);
+	read_fiforeg(flctl, flctl->read_bytes, 0);
+	wait_completion(flctl);
+	return;
+}
+
+static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+
+	switch (chipnr) {
+	case -1:
+		flcmncr_val &= ~CE0_ENABLE;
+		writel(flcmncr_val, FLCMNCR(flctl));
+		break;
+	case 0:
+		flcmncr_val |= CE0_ENABLE;
+		writel(flcmncr_val, FLCMNCR(flctl));
+		break;
+	default:
+		BUG();
+	}
+}
+
+static void flctl_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int i, index = flctl->index;
+
+	for (i = 0; i < len; i++)
+		flctl->done_buff[index + i] = buf[i];
+	flctl->index += len;
+}
+
+static uint8_t flctl_read_byte(struct mtd_info *mtd)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int index = flctl->index;
+	uint8_t data;
+
+	data = flctl->done_buff[index];
+	flctl->index++;
+	return data;
+}
+
+static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		buf[i] = flctl_read_byte(mtd);
+}
+
+static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		if (buf[i] != flctl_read_byte(mtd))
+			return -EFAULT;
+	return 0;
+}
+
+static void flctl_register_init(struct sh_flctl *flctl, unsigned long val)
+{
+	writel(val, FLCMNCR(flctl));
+}
+
+static int flctl_chip_init_tail(struct mtd_info *mtd)
+{
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	struct nand_chip *chip = &flctl->chip;
+
+	if (mtd->writesize == 512) {
+		flctl->page_size = 0;
+		if (chip->chipsize > (32 << 20)) {
+			/* big than 32MB */
+			flctl->rw_ADRCNT = ADRCNT_4;
+			flctl->erase_ADRCNT = ADRCNT_3;
+		} else if (chip->chipsize > (2 << 16)) {
+			/* big than 128KB */
+			flctl->rw_ADRCNT = ADRCNT_3;
+			flctl->erase_ADRCNT = ADRCNT_2;
+		} else {
+			flctl->rw_ADRCNT = ADRCNT_2;
+			flctl->erase_ADRCNT = ADRCNT_1;
+		}
+	} else {
+		flctl->page_size = 1;
+		if (chip->chipsize > (128 << 20)) {
+			/* big than 128MB */
+			flctl->rw_ADRCNT = ADRCNT2_E;
+			flctl->erase_ADRCNT = ADRCNT_3;
+		} else if (chip->chipsize > (8 << 16)) {
+			/* big than 512KB */
+			flctl->rw_ADRCNT = ADRCNT_4;
+			flctl->erase_ADRCNT = ADRCNT_2;
+		} else {
+			flctl->rw_ADRCNT = ADRCNT_3;
+			flctl->erase_ADRCNT = ADRCNT_1;
+		}
+	}
+
+	if (flctl->hwecc) {
+		if (mtd->writesize == 512) {
+			chip->ecc.layout = &flctl_4secc_oob_16;
+			chip->badblock_pattern = &flctl_4secc_smallpage;
+		} else {
+			chip->ecc.layout = &flctl_4secc_oob_64;
+			chip->badblock_pattern = &flctl_4secc_largepage;
+		}
+
+		chip->ecc.size = 512;
+		chip->ecc.bytes = 10;
+		chip->ecc.read_page = flctl_read_page_hwecc;
+		chip->ecc.write_page = flctl_write_page_hwecc;
+		chip->ecc.mode = NAND_ECC_HW;
+
+		/* 4 symbols ECC enabled */
+		writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02,
+				FLCMNCR(flctl));
+	} else {
+		chip->ecc.mode = NAND_ECC_SOFT;
+	}
+
+	return 0;
+}
+
+static int __init flctl_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct sh_flctl *flctl;
+	struct mtd_info *flctl_mtd;
+	struct nand_chip *nand;
+	struct sh_flctl_platform_data *pdata;
+	int ret;
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		printk(KERN_ERR "sh_flctl platform_data not found.\n");
+		return -ENODEV;
+	}
+
+	flctl = kzalloc(sizeof(struct sh_flctl), GFP_KERNEL);
+	if (!flctl) {
+		printk(KERN_ERR "Unable to allocate NAND MTD dev structure.\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		printk(KERN_ERR "%s: resource not found.\n", __func__);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	flctl->reg = ioremap(res->start, res->end - res->start + 1);
+	if (flctl->reg == NULL) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, flctl);
+	flctl_mtd = &flctl->mtd;
+	nand = &flctl->chip;
+	flctl_mtd->priv = nand;
+	flctl->hwecc = pdata->has_hwecc;
+
+	flctl_register_init(flctl, pdata->flcmncr_val);
+
+	nand->options = NAND_NO_AUTOINCR;
+
+	/* Set address of hardware control function */
+	/* 20 us command delay time */
+	nand->chip_delay = 20;
+
+	nand->read_byte = flctl_read_byte;
+	nand->write_buf = flctl_write_buf;
+	nand->read_buf = flctl_read_buf;
+	nand->verify_buf = flctl_verify_buf;
+	nand->select_chip = flctl_select_chip;
+	nand->cmdfunc = flctl_cmdfunc;
+
+	ret = nand_scan_ident(flctl_mtd, 1);
+	if (ret)
+		goto err;
+
+	ret = flctl_chip_init_tail(flctl_mtd);
+	if (ret)
+		goto err;
+
+	ret = nand_scan_tail(flctl_mtd);
+	if (ret)
+		goto err;
+
+	add_mtd_partitions(flctl_mtd, pdata->parts, pdata->nr_parts);
+
+	return 0;
+
+err:
+	kfree(flctl);
+	return ret;
+}
+
+static int __exit flctl_remove(struct platform_device *pdev)
+{
+	struct sh_flctl *flctl = platform_get_drvdata(pdev);
+
+	nand_release(&flctl->mtd);
+	kfree(flctl);
+
+	return 0;
+}
+
+static struct platform_driver flctl_driver = {
+	.probe		= flctl_probe,
+	.remove		= flctl_remove,
+	.driver = {
+		.name	= "sh_flctl",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init flctl_nand_init(void)
+{
+	return platform_driver_register(&flctl_driver);
+}
+
+static void __exit flctl_nand_cleanup(void)
+{
+	platform_driver_unregister(&flctl_driver);
+}
+
+module_init(flctl_nand_init);
+module_exit(flctl_nand_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_DESCRIPTION("SuperH FLCTL driver");
+MODULE_ALIAS("platform:sh_flctl");
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
deleted file mode 100644
index bbf492e6830d..000000000000
--- a/drivers/mtd/nand/toto.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *  drivers/mtd/nand/toto.c
- *
- *  Copyright (c) 2003 Texas Instruments
- *
- *  Derived from drivers/mtd/autcpu12.c
- *
- *  Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   TI fido board. It supports 32MiB and 64MiB cards
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/sizes.h>
-#include <asm/arch/toto.h>
-#include <asm/arch-omap1510/hardware.h>
-#include <asm/arch/gpio.h>
-
-#define CONFIG_NAND_WORKAROUND 1
-
-/*
- * MTD structure for TOTO board
- */
-static struct mtd_info *toto_mtd = NULL;
-
-static unsigned long toto_io_base = OMAP_FLASH_1_BASE;
-
-/*
- * Define partitions for flash devices
- */
-
-static struct mtd_partition partition_info64M[] = {
-	{ .name =	"toto kernel partition 1",
-	  .offset =	0,
-	  .size	=	2 * SZ_1M },
-	{ .name =	"toto file sys partition 2",
-	  .offset =	2 * SZ_1M,
-	  .size =	14 * SZ_1M },
-	{ .name =	"toto user partition 3",
-	  .offset =	16 * SZ_1M,
-	  .size =	16 * SZ_1M },
-	{ .name =	"toto devboard extra partition 4",
-	  .offset =	32 * SZ_1M,
-	  .size =	32 * SZ_1M },
-};
-
-static struct mtd_partition partition_info32M[] = {
-	{ .name =	"toto kernel partition 1",
-	  .offset =	0,
-	  .size =	2 * SZ_1M },
-	{ .name =	"toto file sys partition 2",
-	  .offset =	2 * SZ_1M,
-	  .size =	14 * SZ_1M },
-	{ .name =	"toto user partition 3",
-	  .offset =	16 * SZ_1M,
-	  .size =	16 * SZ_1M },
-};
-
-#define NUM_PARTITIONS32M 3
-#define NUM_PARTITIONS64M 4
-
-/*
- *	hardware specific access to control-lines
- *
- *	ctrl:
- *	NAND_NCE: bit 0 -> bit 14 (0x4000)
- *	NAND_CLE: bit 1 -> bit 12 (0x1000)
- *	NAND_ALE: bit 2 -> bit 1  (0x0002)
- */
-static void toto_hwcontrol(struct mtd_info *mtd, int cmd,
-			   unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		unsigned long bits;
-
-		/* hopefully enough time for tc make proceding write to clear */
-		udelay(1);
-
-		bits = (~ctrl & NAND_NCE) << 14;
-		bits |= (ctrl & NAND_CLE) << 12;
-		bits |= (ctrl & NAND_ALE) >> 1;
-
-#warning Wild guess as gpiosetout() is nowhere defined in the kernel source - tglx
-		gpiosetout(0x5002, bits);
-
-#ifdef CONFIG_NAND_WORKAROUND
-		/* "some" dev boards busted, blue wired to rts2 :( */
-		rts2setout(2, (ctrl & NAND_CLE) << 1);
-#endif
-		/* allow time to ensure gpio state to over take memory write */
-		udelay(1);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * Main initialization routine
- */
-static int __init toto_init(void)
-{
-	struct nand_chip *this;
-	int err = 0;
-
-	/* Allocate memory for MTD device structure and private data */
-	toto_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!toto_mtd) {
-		printk(KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n");
-		err = -ENOMEM;
-		goto out;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&toto_mtd[1]);
-
-	/* Initialize structures */
-	memset(toto_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	toto_mtd->priv = this;
-	toto_mtd->owner = THIS_MODULE;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = toto_io_base;
-	this->IO_ADDR_W = toto_io_base;
-	this->cmd_ctrl = toto_hwcontrol;
-	this->dev_ready = NULL;
-	/* 25 us command delay time */
-	this->chip_delay = 30;
-	this->ecc.mode = NAND_ECC_SOFT;
-
-	/* Scan to find existance of the device */
-	if (nand_scan(toto_mtd, 1)) {
-		err = -ENXIO;
-		goto out_mtd;
-	}
-
-	/* Register the partitions */
-	switch (toto_mtd->size) {
-	case SZ_64M:
-		add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M);
-		break;
-	case SZ_32M:
-		add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M);
-		break;
-	default:{
-			printk(KERN_WARNING "Unsupported Nand device\n");
-			err = -ENXIO;
-			goto out_buf;
-		}
-	}
-
-	gpioreserve(NAND_MASK);	/* claim our gpios */
-	archflashwp(0, 0);	/* open up flash for writing */
-
-	goto out;
-
- out_mtd:
-	kfree(toto_mtd);
- out:
-	return err;
-}
-
-module_init(toto_init);
-
-/*
- * Clean up routine
- */
-static void __exit toto_cleanup(void)
-{
-	/* Release resources, unregister device */
-	nand_release(toto_mtd);
-
-	/* Free the MTD device structure */
-	kfree(toto_mtd);
-
-	/* stop flash writes */
-	archflashwp(0, 1);
-
-	/* release gpios to system */
-	gpiorelease(NAND_MASK);
-}
-
-module_exit(toto_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Richard Woodruff <r-woodruff2@ti.com>");
-MODULE_DESCRIPTION("Glue layer for NAND flash on toto board");