diff options
author | Wolfram Sang <wsa+renesas@sang-engineering.com> | 2016-09-19 23:57:48 +0300 |
---|---|---|
committer | Ulf Hansson <ulf.hansson@linaro.org> | 2016-09-26 22:31:33 +0300 |
commit | 0bc0b6e86524526c92a9409faea79d53db8e7e6e (patch) | |
tree | ddc75163ad847e1d4e772fd94b965d17f3099da0 /drivers/mmc | |
parent | f7dd5462dac0447851079051e40af35d0af7579e (diff) | |
download | linux-0bc0b6e86524526c92a9409faea79d53db8e7e6e.tar.xz |
mmc: tmio: add eMMC support
We need to add R1 without CRC support, refactor the bus width routine a
little and extend a quirk check. To support "non-removable;" we need a
workaround which will be hopefully removed when reworking PM soon.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/host/tmio_mmc.h | 3 | ||||
-rw-r--r-- | drivers/mmc/host/tmio_mmc_pio.c | 38 |
2 files changed, 29 insertions, 12 deletions
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 1f1cb2628f67..8e126afd988c 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -79,6 +79,9 @@ #define CLK_CTL_DIV_MASK 0xff #define CLK_CTL_SCLKEN BIT(8) +#define CARD_OPT_WIDTH8 BIT(13) +#define CARD_OPT_WIDTH BIT(15) + #define TMIO_BBS 512 /* Boot block size */ /* Definitions for values the CTRL_SDIO_STATUS register can take. */ diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 192817850dff..700567603107 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -336,7 +336,9 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command switch (mmc_resp_type(cmd)) { case MMC_RSP_NONE: c |= RESP_NONE; break; - case MMC_RSP_R1: c |= RESP_R1; break; + case MMC_RSP_R1: + case MMC_RSP_R1_NO_CRC: + c |= RESP_R1; break; case MMC_RSP_R1B: c |= RESP_R1B; break; case MMC_RSP_R2: c |= RESP_R2; break; case MMC_RSP_R3: c |= RESP_R3; break; @@ -730,12 +732,13 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host, pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", data->blksz, data->blocks); - /* Some hardware cannot perform 2 byte requests in 4 bit mode */ - if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + /* Some hardware cannot perform 2 byte requests in 4/8 bit mode */ + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4 || + host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) { int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { - pr_err("%s: %d byte block unsupported in 4 bit mode\n", + pr_err("%s: %d byte block unsupported in 4/8 bit mode\n", mmc_hostname(host->mmc), data->blksz); return -EINVAL; } @@ -857,14 +860,16 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host) static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host, unsigned char bus_width) { - switch (bus_width) { - case MMC_BUS_WIDTH_1: - sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); - break; - case MMC_BUS_WIDTH_4: - sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); - break; - } + u16 reg = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT) + & ~(CARD_OPT_WIDTH | CARD_OPT_WIDTH8); + + /* reg now applies to MMC_BUS_WIDTH_4 */ + if (bus_width == MMC_BUS_WIDTH_1) + reg |= CARD_OPT_WIDTH; + else if (bus_width == MMC_BUS_WIDTH_8) + reg |= CARD_OPT_WIDTH8; + + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg); } /* Set MMC clock / power. @@ -1082,6 +1087,15 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, !mmc_card_is_removable(mmc) || mmc->slot.cd_irq >= 0); + /* + * On Gen2+, eMMC with NONREMOVABLE currently fails because native + * hotplug gets disabled. It seems RuntimePM related yet we need further + * research. Since we are planning a PM overhaul anyway, let's enforce + * for now the device being active by enabling native hotplug always. + */ + if (pdata->flags & TMIO_MMC_MIN_RCAR2) + _host->native_hotplug = true; + if (tmio_mmc_clk_enable(_host) < 0) { mmc->f_max = pdata->hclk; mmc->f_min = mmc->f_max / 512; |