Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...

1 files changed, 146 insertions, 21 deletions

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index b2bdf5012c55..5ec8e4bf1ac7 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -73,6 +74,7 @@
 #define ESDHC_STROBE_DLL_CTRL		0x70
 #define ESDHC_STROBE_DLL_CTRL_ENABLE	(1 << 0)
 #define ESDHC_STROBE_DLL_CTRL_RESET	(1 << 1)
+#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT	0x7
 #define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT	3
 #define ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT	(4 << 20)
 
@@ -160,6 +162,22 @@
 #define ESDHC_FLAG_CQHCI		BIT(12)
 /* need request pmqos during low power */
 #define ESDHC_FLAG_PMQOS		BIT(13)
+/* The IP state got lost in low power mode */
+#define ESDHC_FLAG_STATE_LOST_IN_LPMODE		BIT(14)
+/* The IP lost clock rate in PM_RUNTIME */
+#define ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME	BIT(15)
+/*
+ * The IP do not support the ACMD23 feature completely when use ADMA mode.
+ * In ADMA mode, it only use the 16 bit block count of the register 0x4
+ * (BLOCK_ATT) as the CMD23's argument for ACMD23 mode, which means it will
+ * ignore the upper 16 bit of the CMD23's argument. This will block the reliable
+ * write operation in RPMB, because RPMB reliable write need to set the bit31
+ * of the CMD23's argument.
+ * imx6qpdl/imx6sx/imx6sl/imx7d has this limitation only for ADMA mode, SDMA
+ * do not has this limitation. so when these SoC use ADMA mode, it need to
+ * disable the ACMD23 feature.
+ */
+#define ESDHC_FLAG_BROKEN_AUTO_CMD23	BIT(16)
 
 struct esdhc_soc_data {
 	u32 flags;
@@ -182,43 +200,67 @@ static const struct esdhc_soc_data esdhc_imx53_data = {
 };
 
 static const struct esdhc_soc_data usdhc_imx6q_data = {
-	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING,
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING
+			| ESDHC_FLAG_BROKEN_AUTO_CMD23,
 };
 
 static const struct esdhc_soc_data usdhc_imx6sl_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_ERR004536
-			| ESDHC_FLAG_HS200,
+			| ESDHC_FLAG_HS200
+			| ESDHC_FLAG_BROKEN_AUTO_CMD23,
+};
+
+static const struct esdhc_soc_data usdhc_imx6sll_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
+			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+			| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
 };
 
 static const struct esdhc_soc_data usdhc_imx6sx_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
-			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200,
+			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+			| ESDHC_FLAG_STATE_LOST_IN_LPMODE
+			| ESDHC_FLAG_BROKEN_AUTO_CMD23,
 };
 
 static const struct esdhc_soc_data usdhc_imx6ull_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
-			| ESDHC_FLAG_ERR010450,
+			| ESDHC_FLAG_ERR010450
+			| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
 };
 
 static const struct esdhc_soc_data usdhc_imx7d_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
-			| ESDHC_FLAG_HS400,
+			| ESDHC_FLAG_HS400
+			| ESDHC_FLAG_STATE_LOST_IN_LPMODE
+			| ESDHC_FLAG_BROKEN_AUTO_CMD23,
 };
 
 static struct esdhc_soc_data usdhc_imx7ulp_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
-			| ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400,
+			| ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400
+			| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
 };
 
 static struct esdhc_soc_data usdhc_imx8qxp_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
 			| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
-			| ESDHC_FLAG_CQHCI,
+			| ESDHC_FLAG_CQHCI
+			| ESDHC_FLAG_STATE_LOST_IN_LPMODE
+			| ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,
+};
+
+static struct esdhc_soc_data usdhc_imx8mm_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
+			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+			| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
+			| ESDHC_FLAG_CQHCI
+			| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
 };
 
 struct pltfm_imx_data {
@@ -264,11 +306,13 @@ static const struct of_device_id imx_esdhc_dt_ids[] = {
 	{ .compatible = "fsl,imx53-esdhc", .data = &esdhc_imx53_data, },
 	{ .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, },
 	{ .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, },
+	{ .compatible = "fsl,imx6sll-usdhc", .data = &usdhc_imx6sll_data, },
 	{ .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, },
 	{ .compatible = "fsl,imx6ull-usdhc", .data = &usdhc_imx6ull_data, },
 	{ .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, },
 	{ .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, },
 	{ .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, },
+	{ .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
@@ -301,6 +345,17 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i
 	writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
 }
 
+static inline void esdhc_wait_for_card_clock_gate_off(struct sdhci_host *host)
+{
+	u32 present_state;
+	int ret;
+
+	ret = readl_poll_timeout(host->ioaddr + ESDHC_PRSSTAT, present_state,
+				(present_state & ESDHC_CLOCK_GATE_OFF), 2, 100);
+	if (ret == -ETIMEDOUT)
+		dev_warn(mmc_dev(host->mmc), "%s: card clock still not gate off in 100us!.\n", __func__);
+}
+
 static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -514,6 +569,8 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 		else
 			new_val &= ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
 		writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
+		if (!(new_val & ESDHC_VENDOR_SPEC_FRC_SDCLK_ON))
+			esdhc_wait_for_card_clock_gate_off(host);
 		return;
 	case SDHCI_HOST_CONTROL2:
 		new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
@@ -582,10 +639,24 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 			 * For DMA access restore the levels to default value.
 			 */
 			m = readl(host->ioaddr + ESDHC_WTMK_LVL);
-			if (val & SDHCI_TRNS_DMA)
+			if (val & SDHCI_TRNS_DMA) {
 				wml = ESDHC_WTMK_LVL_WML_VAL_DEF;
-			else
+			} else {
+				u8 ctrl;
 				wml = ESDHC_WTMK_LVL_WML_VAL_MAX;
+
+				/*
+				 * Since already disable DMA mode, so also need
+				 * to clear the DMASEL. Otherwise, for standard
+				 * tuning, when send tuning command, usdhc will
+				 * still prefetch the ADMA script from wrong
+				 * DMA address, then we will see IOMMU report
+				 * some error which show lack of TLB mapping.
+				 */
+				ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+				ctrl &= ~SDHCI_CTRL_DMA_MASK;
+				sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+			}
 			m &= ~(ESDHC_WTMK_LVL_RD_WML_MASK |
 			       ESDHC_WTMK_LVL_WR_WML_MASK);
 			m |= (wml << ESDHC_WTMK_LVL_RD_WML_SHIFT) |
@@ -742,12 +813,14 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 	int ddr_pre_div = imx_data->is_ddr ? 2 : 1;
 	int pre_div = 1;
 	int div = 1;
+	int ret;
 	u32 temp, val;
 
 	if (esdhc_is_usdhc(imx_data)) {
 		val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
 		writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
 			host->ioaddr + ESDHC_VENDOR_SPEC);
+		esdhc_wait_for_card_clock_gate_off(host);
 	}
 
 	if (clock == 0) {
@@ -802,13 +875,18 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 		| (pre_div << ESDHC_PREDIV_SHIFT));
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 
+	/* need to wait the bit 3 of the PRSSTAT to be set, make sure card clock is stable */
+	ret = readl_poll_timeout(host->ioaddr + ESDHC_PRSSTAT, temp,
+				(temp & ESDHC_CLOCK_STABLE), 2, 100);
+	if (ret == -ETIMEDOUT)
+		dev_warn(mmc_dev(host->mmc), "card clock still not stable in 100us!.\n");
+
 	if (esdhc_is_usdhc(imx_data)) {
 		val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
 		writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
 			host->ioaddr + ESDHC_VENDOR_SPEC);
 	}
 
-	mdelay(1);
 }
 
 static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
@@ -983,12 +1061,17 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
  */
 static void esdhc_set_strobe_dll(struct sdhci_host *host)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	u32 strobe_delay;
 	u32 v;
+	int ret;
 
 	/* disable clock before enabling strobe dll */
 	writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) &
 		~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
 		host->ioaddr + ESDHC_VENDOR_SPEC);
+	esdhc_wait_for_card_clock_gate_off(host);
 
 	/* force a reset on strobe dll */
 	writel(ESDHC_STROBE_DLL_CTRL_RESET,
@@ -1000,19 +1083,21 @@ static void esdhc_set_strobe_dll(struct sdhci_host *host)
 	 * enable strobe dll ctrl and adjust the delay target
 	 * for the uSDHC loopback read clock
 	 */
+	if (imx_data->boarddata.strobe_dll_delay_target)
+		strobe_delay = imx_data->boarddata.strobe_dll_delay_target;
+	else
+		strobe_delay = ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT;
 	v = ESDHC_STROBE_DLL_CTRL_ENABLE |
 		ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT |
-		(7 << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT);
+		(strobe_delay << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT);
 	writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL);
-	/* wait 5us to make sure strobe dll status register stable */
-	udelay(5);
-	v = readl(host->ioaddr + ESDHC_STROBE_DLL_STATUS);
-	if (!(v & ESDHC_STROBE_DLL_STS_REF_LOCK))
-		dev_warn(mmc_dev(host->mmc),
-		"warning! HS400 strobe DLL status REF not lock!\n");
-	if (!(v & ESDHC_STROBE_DLL_STS_SLV_LOCK))
+
+	/* wait max 50us to get the REF/SLV lock */
+	ret = readl_poll_timeout(host->ioaddr + ESDHC_STROBE_DLL_STATUS, v,
+		((v & ESDHC_STROBE_DLL_STS_REF_LOCK) && (v & ESDHC_STROBE_DLL_STS_SLV_LOCK)), 1, 50);
+	if (ret == -ETIMEDOUT)
 		dev_warn(mmc_dev(host->mmc),
-		"warning! HS400 strobe DLL status SLV not lock!\n");
+		"warning! HS400 strobe DLL status REF/SLV not lock in 50us, STROBE DLL status is %x!\n", v);
 }
 
 static void esdhc_reset_tuning(struct sdhci_host *host)
@@ -1162,6 +1247,7 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	struct cqhci_host *cq_host = host->mmc->cqe_private;
 	int tmp;
 
 	if (esdhc_is_usdhc(imx_data)) {
@@ -1238,6 +1324,21 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
 			tmp &= ~ESDHC_STD_TUNING_EN;
 			writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL);
 		}
+
+		/*
+		 * On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card
+		 * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let the
+		 * the 1st linux configure power/clock for the 2nd Linux.
+		 *
+		 * When the 2nd Linux is booting into rootfs stage, we let the 1st Linux
+		 * to destroy the 2nd linux, then restart the 2nd linux, we met SDHCI dump.
+		 * After we clear the pending interrupt and halt CQCTL, issue gone.
+		 */
+		if (cq_host) {
+			tmp = cqhci_readl(cq_host, CQHCI_IS);
+			cqhci_writel(cq_host, tmp, CQHCI_IS);
+			cqhci_writel(cq_host, CQHCI_HALT, CQHCI_CTL);
+		}
 	}
 }
 
@@ -1328,6 +1429,8 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 	of_property_read_u32(np, "fsl,tuning-start-tap",
 			     &boarddata->tuning_start_tap);
 
+	of_property_read_u32(np, "fsl,strobe-dll-delay-target",
+				&boarddata->strobe_dll_delay_target);
 	if (of_find_property(np, "no-1-8-v", NULL))
 		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
 
@@ -1487,7 +1590,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	imx_data->pinctrl = devm_pinctrl_get(&pdev->dev);
 	if (IS_ERR(imx_data->pinctrl)) {
 		err = PTR_ERR(imx_data->pinctrl);
-		goto disable_ahb_clk;
+		dev_warn(mmc_dev(host->mmc), "could not get pinctrl\n");
 	}
 
 	if (esdhc_is_usdhc(imx_data)) {
@@ -1518,6 +1621,9 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
 		host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;
 
+	if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23)
+		host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN;
+
 	if (imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) {
 		host->mmc->caps2 |= MMC_CAP2_HS400_ES;
 		host->mmc_host_ops.hs400_enhanced_strobe =
@@ -1605,6 +1711,8 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
 static int sdhci_esdhc_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
 	int ret;
 
 	if (host->mmc->caps2 & MMC_CAP2_CQE) {
@@ -1613,10 +1721,20 @@ static int sdhci_esdhc_suspend(struct device *dev)
 			return ret;
 	}
 
+	if ((imx_data->socdata->flags & ESDHC_FLAG_STATE_LOST_IN_LPMODE) &&
+		(host->tuning_mode != SDHCI_TUNING_MODE_1)) {
+		mmc_retune_timer_stop(host->mmc);
+		mmc_retune_needed(host->mmc);
+	}
+
 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
 		mmc_retune_needed(host->mmc);
 
-	return sdhci_suspend_host(host);
+	ret = sdhci_suspend_host(host);
+	if (!ret)
+		return pinctrl_pm_select_sleep_state(dev);
+
+	return ret;
 }
 
 static int sdhci_esdhc_resume(struct device *dev)
@@ -1624,6 +1742,10 @@ static int sdhci_esdhc_resume(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	int ret;
 
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
 	/* re-initialize hw state in case it's lost in low power mode */
 	sdhci_esdhc_imx_hwinit(host);
 
@@ -1681,6 +1803,9 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
 	if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
 		cpu_latency_qos_add_request(&imx_data->pm_qos_req, 0);
 
+	if (imx_data->socdata->flags & ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME)
+		clk_set_rate(imx_data->clk_per, pltfm_host->clock);
+
 	err = clk_prepare_enable(imx_data->clk_ahb);
 	if (err)
 		goto remove_pm_qos_request;