Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply patch to the newly
added ITG-3200 driver.

1 files changed, 27 insertions, 13 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 8d13c6594520..d88219e1d86e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -69,7 +69,7 @@ config MMC_SDHCI_PCI
 	  If unsure, say N.
 
 config MMC_RICOH_MMC
-	bool "Ricoh MMC Controller Disabler  (EXPERIMENTAL)"
+	bool "Ricoh MMC Controller Disabler"
 	depends on MMC_SDHCI_PCI
 	help
 	  This adds a pci quirk to disable Ricoh MMC Controller. This
@@ -186,9 +186,6 @@ config MMC_SDHCI_S3C
 	  often referrered to as the HSMMC block in some of the Samsung S3C
 	  range of SoC.
 
-	  Note, due to the problems with DMA, the DMA support is only
-	  available with CONFIG_EXPERIMENTAL is selected.
-
 	  If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
@@ -233,7 +230,7 @@ config MMC_SDHCI_SPEAR
 
 config MMC_SDHCI_S3C_DMA
 	bool "DMA support on S3C SDHCI"
-	depends on MMC_SDHCI_S3C && EXPERIMENTAL
+	depends on MMC_SDHCI_S3C
 	help
 	  Enable DMA support on the Samsung S3C SDHCI glue. The DMA
 	  has proved to be problematic if the controller encounters
@@ -241,6 +238,17 @@ config MMC_SDHCI_S3C_DMA
 
 	  YMMV.
 
+config MMC_SDHCI_BCM2835
+	tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
+	depends on ARCH_BCM2835
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the BCM2835 SD/MMC controller. If you have a BCM2835
+	  platform with SD or MMC devices, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -330,8 +338,8 @@ config MMC_MXS
 	  If unsure, say N.
 
 config MMC_TIFM_SD
-	tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI
+	tristate "TI Flash Media MMC/SD Interface support"
+	depends on PCI
 	select TIFM_CORE
 	help
 	  Say Y here if you want to be able to access MMC/SD cards with
@@ -364,6 +372,13 @@ config MMC_DAVINCI
           If you have an DAVINCI board with a Multimedia Card slot,
           say Y or M here.  If unsure, say N.
 
+config MMC_GOLDFISH
+	tristate "goldfish qemu Multimedia Card Interface support"
+	depends on GOLDFISH
+	help
+	  This selects the Goldfish Multimedia card Interface emulation
+	  found on the Goldfish Android virtual device emulation.
+
 config MMC_SPI
 	tristate "MMC/SD/SDIO over SPI"
 	depends on SPI_MASTER && !HIGHMEM && HAS_DMA
@@ -410,8 +425,7 @@ config MMC_S3C_PIO
 	  the S3C MCI driver.
 
 config MMC_S3C_DMA
-	bool "Use DMA transfers only (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Use DMA transfers only"
 	help
 	  Use DMA to transfer data between memory and the hardare.
 
@@ -420,7 +434,7 @@ config MMC_S3C_DMA
 	  option is useful.
 
 config MMC_S3C_PIODMA
-	bool "Support for both PIO and DMA (EXPERIMENTAL)"
+	bool "Support for both PIO and DMA"
 	help
 	  Compile both the PIO and DMA transfer routines into the
 	  driver and let the platform select at run-time which one
@@ -431,8 +445,8 @@ config MMC_S3C_PIODMA
 endchoice
 
 config MMC_SDRICOH_CS
-	tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI && PCMCIA
+	tristate "MMC/SD driver for Ricoh Bay1Controllers"
+	depends on PCI && PCMCIA
 	help
 	  Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
 	  card whenever you insert a MMC or SD card into the card slot.
@@ -461,7 +475,7 @@ config MMC_SDHI
 
 config MMC_CB710
 	tristate "ENE CB710 MMC/SD Interface support"
-	depends on PCI
+	depends on PCI && GENERIC_HARDIRQS
 	select CB710_CORE
 	help
 	  This option enables support for MMC/SD part of ENE CB710/720 Flash