misc: lattice-ecp3-config: Remove set but clearly unused variable 'ret'

It's odd for the return value to be assigned to a variable so many
times, but never actually checked, but this has been the case since
the driver's inception in 2012.  If it hasn't caused any issues by
now, it's probably unlikely to.  Let's take it out, at least until
someone finds a reason to start using it.

Fixes the following W=1 kernel build warning:

 drivers/misc/lattice-ecp3-config.c: In function ‘firmware_load’:
 drivers/misc/lattice-ecp3-config.c:70:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 70 | int ret;
 | ^~~

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 9 insertions, 10 deletions

diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index 884485c3f723..5eaf74447ca1 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -67,7 +67,6 @@ static void firmware_load(const struct firmware *fw, void *context)
 	struct spi_device *spi = (struct spi_device *)context;
 	struct fpga_data *data = spi_get_drvdata(spi);
 	u8 *buffer;
-	int ret;
 	u8 txbuf[8];
 	u8 rxbuf[8];
 	int rx_len = 8;
@@ -92,7 +91,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 
 	/* Trying to speak with the FPGA via SPI... */
 	txbuf[0] = FPGA_CMD_READ_ID;
-	ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+	spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
 	jedec_id = get_unaligned_be32(&rxbuf[4]);
 	dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", jedec_id);
 
@@ -110,7 +109,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 	dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name);
 
 	txbuf[0] = FPGA_CMD_READ_STATUS;
-	ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+	spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
 	status = get_unaligned_be32(&rxbuf[4]);
 	dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
 
@@ -130,20 +129,20 @@ static void firmware_load(const struct firmware *fw, void *context)
 	memcpy(buffer + 4, fw->data, fw->size);
 
 	txbuf[0] = FPGA_CMD_REFRESH;
-	ret = spi_write(spi, txbuf, 4);
+	spi_write(spi, txbuf, 4);
 
 	txbuf[0] = FPGA_CMD_WRITE_EN;
-	ret = spi_write(spi, txbuf, 4);
+	spi_write(spi, txbuf, 4);
 
 	txbuf[0] = FPGA_CMD_CLEAR;
-	ret = spi_write(spi, txbuf, 4);
+	spi_write(spi, txbuf, 4);
 
 	/*
 	 * Wait for FPGA memory to become cleared
 	 */
 	for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) {
 		txbuf[0] = FPGA_CMD_READ_STATUS;
-		ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+		spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
 		status = get_unaligned_be32(&rxbuf[4]);
 		if (status == FPGA_STATUS_CLEARED)
 			break;
@@ -160,13 +159,13 @@ static void firmware_load(const struct firmware *fw, void *context)
 	}
 
 	dev_info(&spi->dev, "Configuring the FPGA...\n");
-	ret = spi_write(spi, buffer, fw->size + 8);
+	spi_write(spi, buffer, fw->size + 8);
 
 	txbuf[0] = FPGA_CMD_WRITE_DIS;
-	ret = spi_write(spi, txbuf, 4);
+	spi_write(spi, txbuf, 4);
 
 	txbuf[0] = FPGA_CMD_READ_STATUS;
-	ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+	spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
 	status = get_unaligned_be32(&rxbuf[4]);
 	dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);