Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - A fix for a bug in our page table fragment allocator, where a page
     table page could be freed and reallocated for something else while
     still in use, leading to memory corruption etc. The fix reuses
     pt_mm in struct page (x86 only) for a powerpc only refcount.

   - Fixes to our pkey support. Several are user-visible changes, but
     bring us in to line with x86 behaviour and/or fix outright bugs.
     Thanks to Florian Weimer for reporting many of these.

   - A series to improve the hvc driver & related OPAL console code,
     which have been seen to cause hardlockups at times. The hvc driver
     changes in particular have been in linux-next for ~month.

   - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.

   - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
     use anywhere other than as a paper weight.

   - An optimised memcmp implementation using Power7-or-later VMX
     instructions

   - Support for barrier_nospec on some NXP CPUs.

   - Support for flushing the count cache on context switch on some IBM
     CPUs (controlled by firmware), as a Spectre v2 mitigation.

   - A series to enhance the information we print on unhandled signals
     to bring it into line with other arches, including showing the
     offending VMA and dumping the instructions around the fault.

  Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
  Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
  Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
  Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
  Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
  Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
  Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
  Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
  Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
  Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
  Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
  Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
  Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
  Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
  Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
  Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
  Rao, zhong jiang"

* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
  powerpc/mm/book3s/radix: Add mapping statistics
  powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
  powerpc/mm/hash: Remove unnecessary do { } while(0) loop
  powerpc/64s: move machine check SLB flushing to mm/slb.c
  powerpc/powernv/idle: Fix build error
  powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
  powerpc/mm: remove warning about ‘type’ being set
  powerpc/32: Include setup.h header file to fix warnings
  powerpc: Move `path` variable inside DEBUG_PROM
  powerpc/powermac: Make some functions static
  powerpc/powermac: Remove variable x that's never read
  cxl: remove a dead branch
  powerpc/powermac: Add missing include of header pmac.h
  powerpc/kexec: Use common error handling code in setup_new_fdt()
  powerpc/xmon: Add address lookup for percpu symbols
  powerpc/mm: remove huge_pte_offset_and_shift() prototype
  powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
  powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
  powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
  powerpc/fadump: handle crash memory ranges array index overflow
  ...

15 files changed, 75 insertions, 705 deletions

diff --git a/drivers/misc/cxl/Kconfig b/drivers/misc/cxl/Kconfig
index 93397cb05b15..3ce933707828 100644
--- a/drivers/misc/cxl/Kconfig
+++ b/drivers/misc/cxl/Kconfig
@@ -33,11 +33,3 @@ config CXL
 	  CAPI adapters are found in POWER8 based systems.
 
 	  If unsure, say N.
-
-config CXL_BIMODAL
-	bool "Support for bi-modal CAPI cards"
-	depends on HOTPLUG_PCI_POWERNV = y && CXL || HOTPLUG_PCI_POWERNV = m && CXL = m
-	default y
-	help
-	  Select this option to enable support for bi-modal CAPI cards, such as
-	  the Mellanox CX-4.
diff --git a/drivers/misc/cxl/Makefile b/drivers/misc/cxl/Makefile
index 502d41fc9ea5..5eea61b9584f 100644
--- a/drivers/misc/cxl/Makefile
+++ b/drivers/misc/cxl/Makefile
@@ -4,7 +4,7 @@ ccflags-$(CONFIG_PPC_WERROR)	+= -Werror
 
 cxl-y				+= main.o file.o irq.o fault.o native.o
 cxl-y				+= context.o sysfs.o pci.o trace.o
-cxl-y				+= vphb.o phb.o api.o cxllib.o
+cxl-y				+= vphb.o api.o cxllib.o
 cxl-$(CONFIG_PPC_PSERIES)	+= flash.o guest.o of.o hcalls.o
 cxl-$(CONFIG_DEBUG_FS)		+= debugfs.o
 obj-$(CONFIG_CXL)		+= cxl.o
diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c
index 8fd5ec4d6042..750470ef2049 100644
--- a/drivers/misc/cxl/api.c
+++ b/drivers/misc/cxl/api.c
@@ -11,7 +11,6 @@
 #include <linux/slab.h>
 #include <linux/file.h>
 #include <misc/cxl.h>
-#include <linux/msi.h>
 #include <linux/module.h>
 #include <linux/mount.h>
 #include <linux/sched/mm.h>
@@ -168,21 +167,6 @@ static irq_hw_number_t cxl_find_afu_irq(struct cxl_context *ctx, int num)
 	return 0;
 }
 
-int _cxl_next_msi_hwirq(struct pci_dev *pdev, struct cxl_context **ctx, int *afu_irq)
-{
-	if (*ctx == NULL || *afu_irq == 0) {
-		*afu_irq = 1;
-		*ctx = cxl_get_context(pdev);
-	} else {
-		(*afu_irq)++;
-		if (*afu_irq > cxl_get_max_irqs_per_process(pdev)) {
-			*ctx = list_next_entry(*ctx, extra_irq_contexts);
-			*afu_irq = 1;
-		}
-	}
-	return cxl_find_afu_irq(*ctx, *afu_irq);
-}
-/* Exported via cxl_base */
 
 int cxl_set_priv(struct cxl_context *ctx, void *priv)
 {
@@ -310,7 +294,6 @@ int cxl_start_context(struct cxl_context *ctx, u64 wed,
 	if (task) {
 		ctx->pid = get_task_pid(task, PIDTYPE_PID);
 		kernel = false;
-		ctx->real_mode = false;
 
 		/* acquire a reference to the task's mm */
 		ctx->mm = get_task_mm(current);
@@ -374,24 +357,6 @@ void cxl_set_master(struct cxl_context *ctx)
 }
 EXPORT_SYMBOL_GPL(cxl_set_master);
 
-int cxl_set_translation_mode(struct cxl_context *ctx, bool real_mode)
-{
-	if (ctx->status == STARTED) {
-		/*
-		 * We could potentially update the PE and issue an update LLCMD
-		 * to support this, but it doesn't seem to have a good use case
-		 * since it's trivial to just create a second kernel context
-		 * with different translation modes, so until someone convinces
-		 * me otherwise:
-		 */
-		return -EBUSY;
-	}
-
-	ctx->real_mode = real_mode;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(cxl_set_translation_mode);
-
 /* wrappers around afu_* file ops which are EXPORTED */
 int cxl_fd_open(struct inode *inode, struct file *file)
 {
@@ -573,100 +538,3 @@ ssize_t cxl_read_adapter_vpd(struct pci_dev *dev, void *buf, size_t count)
 	return cxl_ops->read_adapter_vpd(afu->adapter, buf, count);
 }
 EXPORT_SYMBOL_GPL(cxl_read_adapter_vpd);
-
-int cxl_set_max_irqs_per_process(struct pci_dev *dev, int irqs)
-{
-	struct cxl_afu *afu = cxl_pci_to_afu(dev);
-	if (IS_ERR(afu))
-		return -ENODEV;
-
-	if (irqs > afu->adapter->user_irqs)
-		return -EINVAL;
-
-	/* Limit user_irqs to prevent the user increasing this via sysfs */
-	afu->adapter->user_irqs = irqs;
-	afu->irqs_max = irqs;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(cxl_set_max_irqs_per_process);
-
-int cxl_get_max_irqs_per_process(struct pci_dev *dev)
-{
-	struct cxl_afu *afu = cxl_pci_to_afu(dev);
-	if (IS_ERR(afu))
-		return -ENODEV;
-
-	return afu->irqs_max;
-}
-EXPORT_SYMBOL_GPL(cxl_get_max_irqs_per_process);
-
-/*
- * This is a special interrupt allocation routine called from the PHB's MSI
- * setup function. When capi interrupts are allocated in this manner they must
- * still be associated with a running context, but since the MSI APIs have no
- * way to specify this we use the default context associated with the device.
- *
- * The Mellanox CX4 has a hardware limitation that restricts the maximum AFU
- * interrupt number, so in order to overcome this their driver informs us of
- * the restriction by setting the maximum interrupts per context, and we
- * allocate additional contexts as necessary so that we can keep the AFU
- * interrupt number within the supported range.
- */
-int _cxl_cx4_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
-{
-	struct cxl_context *ctx, *new_ctx, *default_ctx;
-	int remaining;
-	int rc;
-
-	ctx = default_ctx = cxl_get_context(pdev);
-	if (WARN_ON(!default_ctx))
-		return -ENODEV;
-
-	remaining = nvec;
-	while (remaining > 0) {
-		rc = cxl_allocate_afu_irqs(ctx, min(remaining, ctx->afu->irqs_max));
-		if (rc) {
-			pr_warn("%s: Failed to find enough free MSIs\n", pci_name(pdev));
-			return rc;
-		}
-		remaining -= ctx->afu->irqs_max;
-
-		if (ctx != default_ctx && default_ctx->status == STARTED) {
-			WARN_ON(cxl_start_context(ctx,
-				be64_to_cpu(default_ctx->elem->common.wed),
-				NULL));
-		}
-
-		if (remaining > 0) {
-			new_ctx = cxl_dev_context_init(pdev);
-			if (IS_ERR(new_ctx)) {
-				pr_warn("%s: Failed to allocate enough contexts for MSIs\n", pci_name(pdev));
-				return -ENOSPC;
-			}
-			list_add(&new_ctx->extra_irq_contexts, &ctx->extra_irq_contexts);
-			ctx = new_ctx;
-		}
-	}
-
-	return 0;
-}
-/* Exported via cxl_base */
-
-void _cxl_cx4_teardown_msi_irqs(struct pci_dev *pdev)
-{
-	struct cxl_context *ctx, *pos, *tmp;
-
-	ctx = cxl_get_context(pdev);
-	if (WARN_ON(!ctx))
-		return;
-
-	cxl_free_afu_irqs(ctx);
-	list_for_each_entry_safe(pos, tmp, &ctx->extra_irq_contexts, extra_irq_contexts) {
-		cxl_stop_context(pos);
-		cxl_free_afu_irqs(pos);
-		list_del(&pos->extra_irq_contexts);
-		cxl_release_context(pos);
-	}
-}
-/* Exported via cxl_base */
diff --git a/drivers/misc/cxl/base.c b/drivers/misc/cxl/base.c
index cd54ce6f6230..7557835cdfcd 100644
--- a/drivers/misc/cxl/base.c
+++ b/drivers/misc/cxl/base.c
@@ -106,89 +106,6 @@ int cxl_update_properties(struct device_node *dn,
 }
 EXPORT_SYMBOL_GPL(cxl_update_properties);
 
-/*
- * API calls into the driver that may be called from the PHB code and must be
- * built in.
- */
-bool cxl_pci_associate_default_context(struct pci_dev *dev, struct cxl_afu *afu)
-{
-	bool ret;
-	struct cxl_calls *calls;
-
-	calls = cxl_calls_get();
-	if (!calls)
-		return false;
-
-	ret = calls->cxl_pci_associate_default_context(dev, afu);
-
-	cxl_calls_put(calls);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(cxl_pci_associate_default_context);
-
-void cxl_pci_disable_device(struct pci_dev *dev)
-{
-	struct cxl_calls *calls;
-
-	calls = cxl_calls_get();
-	if (!calls)
-		return;
-
-	calls->cxl_pci_disable_device(dev);
-
-	cxl_calls_put(calls);
-}
-EXPORT_SYMBOL_GPL(cxl_pci_disable_device);
-
-int cxl_next_msi_hwirq(struct pci_dev *pdev, struct cxl_context **ctx, int *afu_irq)
-{
-	int ret;
-	struct cxl_calls *calls;
-
-	calls = cxl_calls_get();
-	if (!calls)
-		return -EBUSY;
-
-	ret = calls->cxl_next_msi_hwirq(pdev, ctx, afu_irq);
-
-	cxl_calls_put(calls);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(cxl_next_msi_hwirq);
-
-int cxl_cx4_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
-{
-	int ret;
-	struct cxl_calls *calls;
-
-	calls = cxl_calls_get();
-	if (!calls)
-		return false;
-
-	ret = calls->cxl_cx4_setup_msi_irqs(pdev, nvec, type);
-
-	cxl_calls_put(calls);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(cxl_cx4_setup_msi_irqs);
-
-void cxl_cx4_teardown_msi_irqs(struct pci_dev *pdev)
-{
-	struct cxl_calls *calls;
-
-	calls = cxl_calls_get();
-	if (!calls)
-		return;
-
-	calls->cxl_cx4_teardown_msi_irqs(pdev);
-
-	cxl_calls_put(calls);
-}
-EXPORT_SYMBOL_GPL(cxl_cx4_teardown_msi_irqs);
-
 static int __init cxl_base_init(void)
 {
 	struct device_node *np;
diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c
index c6ec872800a2..5fe529b43ebe 100644
--- a/drivers/misc/cxl/context.c
+++ b/drivers/misc/cxl/context.c
@@ -74,7 +74,6 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master)
 	ctx->pending_afu_err = false;
 
 	INIT_LIST_HEAD(&ctx->irq_names);
-	INIT_LIST_HEAD(&ctx->extra_irq_contexts);
 
 	/*
 	 * When we have to destroy all contexts in cxl_context_detach_all() we
@@ -96,7 +95,7 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master)
 	 */
 	mutex_lock(&afu->contexts_lock);
 	idr_preload(GFP_KERNEL);
-	i = idr_alloc(&ctx->afu->contexts_idr, ctx, ctx->afu->adapter->min_pe,
+	i = idr_alloc(&ctx->afu->contexts_idr, ctx, 0,
 		      ctx->afu->num_procs, GFP_NOWAIT);
 	idr_preload_end();
 	mutex_unlock(&afu->contexts_lock);
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 918d4fb742d1..d1d927ccb589 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -93,11 +93,6 @@ static const cxl_p1_reg_t CXL_PSL_FIR_CNTL  = {0x0148};
 static const cxl_p1_reg_t CXL_PSL_DSNDCTL   = {0x0150};
 static const cxl_p1_reg_t CXL_PSL_SNWRALLOC = {0x0158};
 static const cxl_p1_reg_t CXL_PSL_TRACE     = {0x0170};
-/* XSL registers (Mellanox CX4) */
-static const cxl_p1_reg_t CXL_XSL_Timebase  = {0x0100};
-static const cxl_p1_reg_t CXL_XSL_TB_CTLSTAT = {0x0108};
-static const cxl_p1_reg_t CXL_XSL_FEC       = {0x0158};
-static const cxl_p1_reg_t CXL_XSL_DSNCTL    = {0x0168};
 /* PSL registers - CAIA 2 */
 static const cxl_p1_reg_t CXL_PSL9_CONTROL  = {0x0020};
 static const cxl_p1_reg_t CXL_XSL9_INV      = {0x0110};
@@ -613,7 +608,6 @@ struct cxl_context {
 	bool pe_inserted;
 	bool master;
 	bool kernel;
-	bool real_mode;
 	bool pending_irq;
 	bool pending_fault;
 	bool pending_afu_err;
@@ -624,14 +618,6 @@ struct cxl_context {
 
 	struct rcu_head rcu;
 
-	/*
-	 * Only used when more interrupts are allocated via
-	 * pci_enable_msix_range than are supported in the default context, to
-	 * use additional contexts to overcome the limitation. i.e. Mellanox
-	 * CX4 only:
-	 */
-	struct list_head extra_irq_contexts;
-
 	struct mm_struct *mm;
 
 	u16 tidr;
@@ -704,7 +690,6 @@ struct cxl {
 	struct bin_attribute cxl_attr;
 	int adapter_num;
 	int user_irqs;
-	int min_pe;
 	u64 ps_size;
 	u16 psl_rev;
 	u16 base_image;
@@ -865,32 +850,12 @@ static inline bool cxl_is_power9(void)
 	return false;
 }
 
-static inline bool cxl_is_power9_dd1(void)
-{
-	if ((pvr_version_is(PVR_POWER9)) &&
-	    cpu_has_feature(CPU_FTR_POWER9_DD1))
-		return true;
-	return false;
-}
-
 ssize_t cxl_pci_afu_read_err_buffer(struct cxl_afu *afu, char *buf,
 				loff_t off, size_t count);
 
-/* Internal functions wrapped in cxl_base to allow PHB to call them */
-bool _cxl_pci_associate_default_context(struct pci_dev *dev, struct cxl_afu *afu);
-void _cxl_pci_disable_device(struct pci_dev *dev);
-int _cxl_next_msi_hwirq(struct pci_dev *pdev, struct cxl_context **ctx, int *afu_irq);
-int _cxl_cx4_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type);
-void _cxl_cx4_teardown_msi_irqs(struct pci_dev *pdev);
 
 struct cxl_calls {
 	void (*cxl_slbia)(struct mm_struct *mm);
-	bool (*cxl_pci_associate_default_context)(struct pci_dev *dev, struct cxl_afu *afu);
-	void (*cxl_pci_disable_device)(struct pci_dev *dev);
-	int (*cxl_next_msi_hwirq)(struct pci_dev *pdev, struct cxl_context **ctx, int *afu_irq);
-	int (*cxl_cx4_setup_msi_irqs)(struct pci_dev *pdev, int nvec, int type);
-	void (*cxl_cx4_teardown_msi_irqs)(struct pci_dev *pdev);
-
 	struct module *owner;
 };
 int register_cxl_calls(struct cxl_calls *calls);
@@ -955,7 +920,6 @@ int cxl_debugfs_afu_add(struct cxl_afu *afu);
 void cxl_debugfs_afu_remove(struct cxl_afu *afu);
 void cxl_debugfs_add_adapter_regs_psl9(struct cxl *adapter, struct dentry *dir);
 void cxl_debugfs_add_adapter_regs_psl8(struct cxl *adapter, struct dentry *dir);
-void cxl_debugfs_add_adapter_regs_xsl(struct cxl *adapter, struct dentry *dir);
 void cxl_debugfs_add_afu_regs_psl9(struct cxl_afu *afu, struct dentry *dir);
 void cxl_debugfs_add_afu_regs_psl8(struct cxl_afu *afu, struct dentry *dir);
 
@@ -998,11 +962,6 @@ static inline void cxl_debugfs_add_adapter_regs_psl8(struct cxl *adapter,
 {
 }
 
-static inline void cxl_debugfs_add_adapter_regs_xsl(struct cxl *adapter,
-						    struct dentry *dir)
-{
-}
-
 static inline void cxl_debugfs_add_afu_regs_psl9(struct cxl_afu *afu, struct dentry *dir)
 {
 }
diff --git a/drivers/misc/cxl/cxllib.c b/drivers/misc/cxl/cxllib.c
index 0bc7c31cf739..5a3f91255258 100644
--- a/drivers/misc/cxl/cxllib.c
+++ b/drivers/misc/cxl/cxllib.c
@@ -102,10 +102,6 @@ int cxllib_get_xsl_config(struct pci_dev *dev, struct cxllib_xsl_config *cfg)
 	rc = cxl_get_xsl9_dsnctl(dev, capp_unit_id, &cfg->dsnctl);
 	if (rc)
 		return rc;
-	if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
-		/* workaround for DD1 - nbwind = capiind */
-		cfg->dsnctl |= ((u64)0x02 << (63-47));
-	}
 
 	cfg->version  = CXL_XSL_CONFIG_CURRENT_VERSION;
 	cfg->log_bar_size = CXL_CAPI_WINDOW_LOG_SIZE;
diff --git a/drivers/misc/cxl/debugfs.c b/drivers/misc/cxl/debugfs.c
index 1643850d2302..a1921d81593a 100644
--- a/drivers/misc/cxl/debugfs.c
+++ b/drivers/misc/cxl/debugfs.c
@@ -58,11 +58,6 @@ void cxl_debugfs_add_adapter_regs_psl8(struct cxl *adapter, struct dentry *dir)
 	debugfs_create_io_x64("trace", S_IRUSR | S_IWUSR, dir, _cxl_p1_addr(adapter, CXL_PSL_TRACE));
 }
 
-void cxl_debugfs_add_adapter_regs_xsl(struct cxl *adapter, struct dentry *dir)
-{
-	debugfs_create_io_x64("fec", S_IRUSR, dir, _cxl_p1_addr(adapter, CXL_XSL_FEC));
-}
-
 int cxl_debugfs_adapter_add(struct cxl *adapter)
 {
 	struct dentry *dir;
diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c
index 70dbb6de102c..d45f3e6b17d2 100644
--- a/drivers/misc/cxl/fault.c
+++ b/drivers/misc/cxl/fault.c
@@ -33,7 +33,7 @@ static bool sste_matches(struct cxl_sste *sste, struct copro_slb *slb)
  * This finds a free SSTE for the given SLB, or returns NULL if it's already in
  * the segment table.
  */
-static struct cxl_sste* find_free_sste(struct cxl_context *ctx,
+static struct cxl_sste *find_free_sste(struct cxl_context *ctx,
 				       struct copro_slb *slb)
 {
 	struct cxl_sste *primary, *sste, *ret = NULL;
diff --git a/drivers/misc/cxl/guest.c b/drivers/misc/cxl/guest.c
index 4644f16606a3..3bc0c15d4d85 100644
--- a/drivers/misc/cxl/guest.c
+++ b/drivers/misc/cxl/guest.c
@@ -623,9 +623,6 @@ static int guest_attach_process(struct cxl_context *ctx, bool kernel, u64 wed, u
 {
 	pr_devel("in %s\n", __func__);
 
-	if (ctx->real_mode)
-		return -EPERM;
-
 	ctx->kernel = kernel;
 	if (ctx->afu->current_mode == CXL_MODE_DIRECTED)
 		return attach_afu_directed(ctx, wed, amr);
@@ -916,11 +913,6 @@ static int afu_properties_look_ok(struct cxl_afu *afu)
 		return -EINVAL;
 	}
 
-	if (afu->crs_len < 0) {
-		dev_err(&afu->dev, "Unexpected configuration record size value\n");
-		return -EINVAL;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/misc/cxl/main.c b/drivers/misc/cxl/main.c
index c1ba0d42cbc8..f35406be465a 100644
--- a/drivers/misc/cxl/main.c
+++ b/drivers/misc/cxl/main.c
@@ -104,11 +104,6 @@ static inline void cxl_slbia_core(struct mm_struct *mm)
 
 static struct cxl_calls cxl_calls = {
 	.cxl_slbia = cxl_slbia_core,
-	.cxl_pci_associate_default_context = _cxl_pci_associate_default_context,
-	.cxl_pci_disable_device = _cxl_pci_disable_device,
-	.cxl_next_msi_hwirq = _cxl_next_msi_hwirq,
-	.cxl_cx4_setup_msi_irqs = _cxl_cx4_setup_msi_irqs,
-	.cxl_cx4_teardown_msi_irqs = _cxl_cx4_teardown_msi_irqs,
 	.owner = THIS_MODULE,
 };
 
@@ -287,7 +282,7 @@ int cxl_adapter_context_get(struct cxl *adapter)
 	int rc;
 
 	rc = atomic_inc_unless_negative(&adapter->contexts_num);
-	return rc >= 0 ? 0 : -EBUSY;
+	return rc ? 0 : -EBUSY;
 }
 
 void cxl_adapter_context_put(struct cxl *adapter)
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index 98f867fcef24..c9d5d82dce8e 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -605,6 +605,7 @@ u64 cxl_calculate_sr(bool master, bool kernel, bool real_mode, bool p9)
 		sr |= CXL_PSL_SR_An_MP;
 	if (mfspr(SPRN_LPCR) & LPCR_TC)
 		sr |= CXL_PSL_SR_An_TC;
+
 	if (kernel) {
 		if (!real_mode)
 			sr |= CXL_PSL_SR_An_R;
@@ -629,7 +630,7 @@ u64 cxl_calculate_sr(bool master, bool kernel, bool real_mode, bool p9)
 
 static u64 calculate_sr(struct cxl_context *ctx)
 {
-	return cxl_calculate_sr(ctx->master, ctx->kernel, ctx->real_mode,
+	return cxl_calculate_sr(ctx->master, ctx->kernel, false,
 				cxl_is_power9());
 }
 
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 429d6de1dde7..b66d832d3233 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -55,8 +55,6 @@
 	pci_read_config_byte(dev, vsec + 0xa, dest)
 #define CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val) \
 	pci_write_config_byte(dev, vsec + 0xa, val)
-#define CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, vsec, val) \
-	pci_bus_write_config_byte(bus, devfn, vsec + 0xa, val)
 #define CXL_VSEC_PROTOCOL_MASK   0xe0
 #define CXL_VSEC_PROTOCOL_1024TB 0x80
 #define CXL_VSEC_PROTOCOL_512TB  0x40
@@ -465,23 +463,21 @@ int cxl_get_xsl9_dsnctl(struct pci_dev *dev, u64 capp_unit_id, u64 *reg)
 	/* nMMU_ID Defaults to: b’000001001’*/
 	xsl_dsnctl |= ((u64)0x09 << (63-28));
 
-	if (!(cxl_is_power9_dd1())) {
-		/*
-		 * Used to identify CAPI packets which should be sorted into
-		 * the Non-Blocking queues by the PHB. This field should match
-		 * the PHB PBL_NBW_CMPM register
-		 * nbwind=0x03, bits [57:58], must include capi indicator.
-		 * Not supported on P9 DD1.
-		 */
-		xsl_dsnctl |= (nbwind << (63-55));
+	/*
+	 * Used to identify CAPI packets which should be sorted into
+	 * the Non-Blocking queues by the PHB. This field should match
+	 * the PHB PBL_NBW_CMPM register
+	 * nbwind=0x03, bits [57:58], must include capi indicator.
+	 * Not supported on P9 DD1.
+	 */
+	xsl_dsnctl |= (nbwind << (63-55));
 
-		/*
-		 * Upper 16b address bits of ASB_Notify messages sent to the
-		 * system. Need to match the PHB’s ASN Compare/Mask Register.
-		 * Not supported on P9 DD1.
-		 */
-		xsl_dsnctl |= asnind;
-	}
+	/*
+	 * Upper 16b address bits of ASB_Notify messages sent to the
+	 * system. Need to match the PHB’s ASN Compare/Mask Register.
+	 * Not supported on P9 DD1.
+	 */
+	xsl_dsnctl |= asnind;
 
 	*reg = xsl_dsnctl;
 	return 0;
@@ -539,15 +535,8 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter,
 	/* Snoop machines */
 	cxl_p1_write(adapter, CXL_PSL9_APCDEDALLOC, 0x800F000200000000ULL);
 
-	if (cxl_is_power9_dd1()) {
-		/* Disabling deadlock counter CAR */
-		cxl_p1_write(adapter, CXL_PSL9_GP_CT, 0x0020000000000001ULL);
-		/* Enable NORST */
-		cxl_p1_write(adapter, CXL_PSL9_DEBUG, 0x8000000000000000ULL);
-	} else {
-		/* Enable NORST and DD2 features */
-		cxl_p1_write(adapter, CXL_PSL9_DEBUG, 0xC000000000000000ULL);
-	}
+	/* Enable NORST and DD2 features */
+	cxl_p1_write(adapter, CXL_PSL9_DEBUG, 0xC000000000000000ULL);
 
 	/*
 	 * Check if PSL has data-cache. We need to flush adapter datacache
@@ -595,27 +584,7 @@ static int init_implementation_adapter_regs_psl8(struct cxl *adapter, struct pci
 	return 0;
 }
 
-static int init_implementation_adapter_regs_xsl(struct cxl *adapter, struct pci_dev *dev)
-{
-	u64 xsl_dsnctl;
-	u64 chipid;
-	u32 phb_index;
-	u64 capp_unit_id;
-	int rc;
-
-	rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
-	if (rc)
-		return rc;
-
-	/* Tell XSL where to route data to */
-	xsl_dsnctl = 0x0000600000000000ULL | (chipid << (63-5));
-	xsl_dsnctl |= (capp_unit_id << (63-13));
-	cxl_p1_write(adapter, CXL_XSL_DSNCTL, xsl_dsnctl);
-
-	return 0;
-}
-
-/* PSL & XSL */
+/* PSL */
 #define TBSYNC_CAL(n) (((u64)n & 0x7) << (63-3))
 #define TBSYNC_CNT(n) (((u64)n & 0x7) << (63-6))
 /* For the PSL this is a multiple for 0 < n <= 7: */
@@ -627,21 +596,6 @@ static void write_timebase_ctrl_psl8(struct cxl *adapter)
 		     TBSYNC_CNT(2 * PSL_2048_250MHZ_CYCLES));
 }
 
-/* XSL */
-#define TBSYNC_ENA (1ULL << 63)
-/* For the XSL this is 2**n * 2000 clocks for 0 < n <= 6: */
-#define XSL_2000_CLOCKS 1
-#define XSL_4000_CLOCKS 2
-#define XSL_8000_CLOCKS 3
-
-static void write_timebase_ctrl_xsl(struct cxl *adapter)
-{
-	cxl_p1_write(adapter, CXL_XSL_TB_CTLSTAT,
-		     TBSYNC_ENA |
-		     TBSYNC_CAL(3) |
-		     TBSYNC_CNT(XSL_4000_CLOCKS));
-}
-
 static u64 timebase_read_psl9(struct cxl *adapter)
 {
 	return cxl_p1_read(adapter, CXL_PSL9_Timebase);
@@ -652,11 +606,6 @@ static u64 timebase_read_psl8(struct cxl *adapter)
 	return cxl_p1_read(adapter, CXL_PSL_Timebase);
 }
 
-static u64 timebase_read_xsl(struct cxl *adapter)
-{
-	return cxl_p1_read(adapter, CXL_XSL_Timebase);
-}
-
 static void cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
 {
 	struct device_node *np;
@@ -800,234 +749,36 @@ static int setup_cxl_bars(struct pci_dev *dev)
 	return 0;
 }
 
-#ifdef CONFIG_CXL_BIMODAL
-
-struct cxl_switch_work {
-	struct pci_dev *dev;
-	struct work_struct work;
-	int vsec;
-	int mode;
-};
-
-static void switch_card_to_cxl(struct work_struct *work)
+/* pciex node: ibm,opal-m64-window = <0x3d058 0x0 0x3d058 0x0 0x8 0x0>; */
+static int switch_card_to_cxl(struct pci_dev *dev)
 {
-	struct cxl_switch_work *switch_work =
-		container_of(work, struct cxl_switch_work, work);
-	struct pci_dev *dev = switch_work->dev;
-	struct pci_bus *bus = dev->bus;
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	struct pci_dev *bridge;
-	struct pnv_php_slot *php_slot;
-	unsigned int devfn;
+	int vsec;
 	u8 val;
 	int rc;
 
-	dev_info(&bus->dev, "cxl: Preparing for mode switch...\n");
-	bridge = list_first_entry_or_null(&hose->bus->devices, struct pci_dev,
-					  bus_list);
-	if (!bridge) {
-		dev_WARN(&bus->dev, "cxl: Couldn't find root port!\n");
-		goto err_dev_put;
-	}
-
-	php_slot = pnv_php_find_slot(pci_device_to_OF_node(bridge));
-	if (!php_slot) {
-		dev_err(&bus->dev, "cxl: Failed to find slot hotplug "
-			           "information. You may need to upgrade "
-			           "skiboot. Aborting.\n");
-		goto err_dev_put;
-	}
-
-	rc = CXL_READ_VSEC_MODE_CONTROL(dev, switch_work->vsec, &val);
-	if (rc) {
-		dev_err(&bus->dev, "cxl: Failed to read CAPI mode control: %i\n", rc);
-		goto err_dev_put;
-	}
-	devfn = dev->devfn;
-
-	/* Release the reference obtained in cxl_check_and_switch_mode() */
-	pci_dev_put(dev);
-
-	dev_dbg(&bus->dev, "cxl: Removing PCI devices from kernel\n");
-	pci_lock_rescan_remove();
-	pci_hp_remove_devices(bridge->subordinate);
-	pci_unlock_rescan_remove();
-
-	/* Switch the CXL protocol on the card */
-	if (switch_work->mode == CXL_BIMODE_CXL) {
-		dev_info(&bus->dev, "cxl: Switching card to CXL mode\n");
-		val &= ~CXL_VSEC_PROTOCOL_MASK;
-		val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
-		rc = pnv_cxl_enable_phb_kernel_api(hose, true);
-		if (rc) {
-			dev_err(&bus->dev, "cxl: Failed to enable kernel API"
-				           " on real PHB, aborting\n");
-			goto err_free_work;
-		}
-	} else {
-		dev_WARN(&bus->dev, "cxl: Switching card to PCI mode not supported!\n");
-		goto err_free_work;
-	}
-
-	rc = CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, switch_work->vsec, val);
-	if (rc) {
-		dev_err(&bus->dev, "cxl: Failed to configure CXL protocol: %i\n", rc);
-		goto err_free_work;
-	}
+	dev_info(&dev->dev, "switch card to CXL\n");
 
-	/*
-	 * The CAIA spec (v1.1, Section 10.6 Bi-modal Device Support) states
-	 * we must wait 100ms after this mode switch before touching PCIe config
-	 * space.
-	 */
-	msleep(100);
-
-	/*
-	 * Hot reset to cause the card to come back in cxl mode. A
-	 * OPAL_RESET_PCI_LINK would be sufficient, but currently lacks support
-	 * in skiboot, so we use a hot reset instead.
-	 *
-	 * We call pci_set_pcie_reset_state() on the bridge, as a CAPI card is
-	 * guaranteed to sit directly under the root port, and setting the reset
-	 * state on a device directly under the root port is equivalent to doing
-	 * it on the root port iself.
-	 */
-	dev_info(&bus->dev, "cxl: Configuration write complete, resetting card\n");
-	pci_set_pcie_reset_state(bridge, pcie_hot_reset);
-	pci_set_pcie_reset_state(bridge, pcie_deassert_reset);
-
-	dev_dbg(&bus->dev, "cxl: Offlining slot\n");
-	rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_OFFLINE);
-	if (rc) {
-		dev_err(&bus->dev, "cxl: OPAL offlining call failed: %i\n", rc);
-		goto err_free_work;
-	}
-
-	dev_dbg(&bus->dev, "cxl: Onlining and probing slot\n");
-	rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_ONLINE);
-	if (rc) {
-		dev_err(&bus->dev, "cxl: OPAL onlining call failed: %i\n", rc);
-		goto err_free_work;
-	}
-
-	pci_lock_rescan_remove();
-	pci_hp_add_devices(bridge->subordinate);
-	pci_unlock_rescan_remove();
-
-	dev_info(&bus->dev, "cxl: CAPI mode switch completed\n");
-	kfree(switch_work);
-	return;
-
-err_dev_put:
-	/* Release the reference obtained in cxl_check_and_switch_mode() */
-	pci_dev_put(dev);
-err_free_work:
-	kfree(switch_work);
-}
-
-int cxl_check_and_switch_mode(struct pci_dev *dev, int mode, int vsec)
-{
-	struct cxl_switch_work *work;
-	u8 val;
-	int rc;
-
-	if (!cpu_has_feature(CPU_FTR_HVMODE))
+	if (!(vsec = find_cxl_vsec(dev))) {
+		dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
 		return -ENODEV;
-
-	if (!vsec) {
-		vsec = find_cxl_vsec(dev);
-		if (!vsec) {
-			dev_info(&dev->dev, "CXL VSEC not found\n");
-			return -ENODEV;
-		}
 	}
 
-	rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
-	if (rc) {
-		dev_err(&dev->dev, "Failed to read current mode control: %i", rc);
+	if ((rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val))) {
+		dev_err(&dev->dev, "failed to read current mode control: %i", rc);
 		return rc;
 	}
-
-	if (mode == CXL_BIMODE_PCI) {
-		if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
-			dev_info(&dev->dev, "Card is already in PCI mode\n");
-			return 0;
-		}
-		/*
-		 * TODO: Before it's safe to switch the card back to PCI mode
-		 * we need to disable the CAPP and make sure any cachelines the
-		 * card holds have been flushed out. Needs skiboot support.
-		 */
-		dev_WARN(&dev->dev, "CXL mode switch to PCI unsupported!\n");
-		return -EIO;
-	}
-
-	if (val & CXL_VSEC_PROTOCOL_ENABLE) {
-		dev_info(&dev->dev, "Card is already in CXL mode\n");
-		return 0;
+	val &= ~CXL_VSEC_PROTOCOL_MASK;
+	val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
+	if ((rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val))) {
+		dev_err(&dev->dev, "failed to enable CXL protocol: %i", rc);
+		return rc;
 	}
-
-	dev_info(&dev->dev, "Card is in PCI mode, scheduling kernel thread "
-			    "to switch to CXL mode\n");
-
-	work = kmalloc(sizeof(struct cxl_switch_work), GFP_KERNEL);
-	if (!work)
-		return -ENOMEM;
-
-	pci_dev_get(dev);
-	work->dev = dev;
-	work->vsec = vsec;
-	work->mode = mode;
-	INIT_WORK(&work->work, switch_card_to_cxl);
-
-	schedule_work(&work->work);
-
 	/*
-	 * We return a failure now to abort the driver init. Once the
-	 * link has been cycled and the card is in cxl mode we will
-	 * come back (possibly using the generic cxl driver), but
-	 * return success as the card should then be in cxl mode.
-	 *
-	 * TODO: What if the card comes back in PCI mode even after
-	 *       the switch?  Don't want to spin endlessly.
+	 * The CAIA spec (v0.12 11.6 Bi-modal Device Support) states
+	 * we must wait 100ms after this mode switch before touching
+	 * PCIe config space.
 	 */
-	return -EBUSY;
-}
-EXPORT_SYMBOL_GPL(cxl_check_and_switch_mode);
-
-#endif /* CONFIG_CXL_BIMODAL */
-
-static int setup_cxl_protocol_area(struct pci_dev *dev)
-{
-	u8 val;
-	int rc;
-	int vsec = find_cxl_vsec(dev);
-
-	if (!vsec) {
-		dev_info(&dev->dev, "CXL VSEC not found\n");
-		return -ENODEV;
-	}
-
-	rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
-	if (rc) {
-		dev_err(&dev->dev, "Failed to read current mode control: %i\n", rc);
-		return rc;
-	}
-
-	if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
-		dev_err(&dev->dev, "Card not in CAPI mode!\n");
-		return -EIO;
-	}
-
-	if ((val & CXL_VSEC_PROTOCOL_MASK) != CXL_VSEC_PROTOCOL_256TB) {
-		val &= ~CXL_VSEC_PROTOCOL_MASK;
-		val |= CXL_VSEC_PROTOCOL_256TB;
-		rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val);
-		if (rc) {
-			dev_err(&dev->dev, "Failed to set CXL protocol area: %i\n", rc);
-			return rc;
-		}
-	}
+	msleep(100);
 
 	return 0;
 }
@@ -1724,7 +1475,7 @@ static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
 	if ((rc = setup_cxl_bars(dev)))
 		return rc;
 
-	if ((rc = setup_cxl_protocol_area(dev)))
+	if ((rc = switch_card_to_cxl(dev)))
 		return rc;
 
 	if ((rc = cxl_update_image_control(adapter)))
@@ -1871,37 +1622,14 @@ static const struct cxl_service_layer_ops psl8_ops = {
 	.needs_reset_before_disable = true,
 };
 
-static const struct cxl_service_layer_ops xsl_ops = {
-	.adapter_regs_init = init_implementation_adapter_regs_xsl,
-	.invalidate_all = cxl_invalidate_all_psl8,
-	.sanitise_afu_regs = sanitise_afu_regs_psl8,
-	.handle_interrupt = cxl_irq_psl8,
-	.fail_irq = cxl_fail_irq_psl,
-	.activate_dedicated_process = cxl_activate_dedicated_process_psl8,
-	.attach_afu_directed = cxl_attach_afu_directed_psl8,
-	.attach_dedicated_process = cxl_attach_dedicated_process_psl8,
-	.update_dedicated_ivtes = cxl_update_dedicated_ivtes_psl8,
-	.debugfs_add_adapter_regs = cxl_debugfs_add_adapter_regs_xsl,
-	.write_timebase_ctrl = write_timebase_ctrl_xsl,
-	.timebase_read = timebase_read_xsl,
-	.capi_mode = OPAL_PHB_CAPI_MODE_DMA,
-};
-
 static void set_sl_ops(struct cxl *adapter, struct pci_dev *dev)
 {
-	if (dev->vendor == PCI_VENDOR_ID_MELLANOX && dev->device == 0x1013) {
-		/* Mellanox CX-4 */
-		dev_info(&dev->dev, "Device uses an XSL\n");
-		adapter->native->sl_ops = &xsl_ops;
-		adapter->min_pe = 1; /* Workaround for CX-4 hardware bug */
+	if (cxl_is_power8()) {
+		dev_info(&dev->dev, "Device uses a PSL8\n");
+		adapter->native->sl_ops = &psl8_ops;
 	} else {
-		if (cxl_is_power8()) {
-			dev_info(&dev->dev, "Device uses a PSL8\n");
-			adapter->native->sl_ops = &psl8_ops;
-		} else {
-			dev_info(&dev->dev, "Device uses a PSL9\n");
-			adapter->native->sl_ops = &psl9_ops;
-		}
+		dev_info(&dev->dev, "Device uses a PSL9\n");
+		adapter->native->sl_ops = &psl9_ops;
 	}
 }
 
@@ -2008,43 +1736,6 @@ int cxl_slot_is_switched(struct pci_dev *dev)
 	return (depth > CXL_MAX_PCIEX_PARENT);
 }
 
-bool cxl_slot_is_supported(struct pci_dev *dev, int flags)
-{
-	if (!cpu_has_feature(CPU_FTR_HVMODE))
-		return false;
-
-	if ((flags & CXL_SLOT_FLAG_DMA) && (!pvr_version_is(PVR_POWER8NVL))) {
-		/*
-		 * CAPP DMA mode is technically supported on regular P8, but
-		 * will EEH if the card attempts to access memory < 4GB, which
-		 * we cannot realistically avoid. We might be able to work
-		 * around the issue, but until then return unsupported:
-		 */
-		return false;
-	}
-
-	if (cxl_slot_is_switched(dev))
-		return false;
-
-	/*
-	 * XXX: This gets a little tricky on regular P8 (not POWER8NVL) since
-	 * the CAPP can be connected to PHB 0, 1 or 2 on a first come first
-	 * served basis, which is racy to check from here. If we need to
-	 * support this in future we might need to consider having this
-	 * function effectively reserve it ahead of time.
-	 *
-	 * Currently, the only user of this API is the Mellanox CX4, which is
-	 * only supported on P8NVL due to the above mentioned limitation of
-	 * CAPP DMA mode and therefore does not need to worry about this. If the
-	 * issue with CAPP DMA mode is later worked around on P8 we might need
-	 * to revisit this.
-	 */
-
-	return true;
-}
-EXPORT_SYMBOL_GPL(cxl_slot_is_supported);
-
-
 static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct cxl *adapter;
@@ -2086,9 +1777,6 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			dev_err(&dev->dev, "AFU %i failed to start: %i\n", slice, rc);
 	}
 
-	if (pnv_pci_on_cxl_phb(dev) && adapter->slices >= 1)
-		pnv_cxl_phb_set_peer_afu(dev, adapter->afu[0]);
-
 	return 0;
 }
 
diff --git a/drivers/misc/cxl/phb.c b/drivers/misc/cxl/phb.c
deleted file mode 100644
index 6ec69ada19f4..000000000000
--- a/drivers/misc/cxl/phb.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2014-2016 IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/pci.h>
-#include "cxl.h"
-
-bool _cxl_pci_associate_default_context(struct pci_dev *dev, struct cxl_afu *afu)
-{
-	struct cxl_context *ctx;
-
-	/*
-	 * Allocate a context to do cxl things to. This is used for interrupts
-	 * in the peer model using a real phb, and if we eventually do DMA ops
-	 * in the virtual phb, we'll need a default context to attach them to.
-	 */
-	ctx = cxl_dev_context_init(dev);
-	if (IS_ERR(ctx))
-		return false;
-	dev->dev.archdata.cxl_ctx = ctx;
-
-	return (cxl_ops->afu_check_and_enable(afu) == 0);
-}
-/* exported via cxl_base */
-
-void _cxl_pci_disable_device(struct pci_dev *dev)
-{
-	struct cxl_context *ctx = cxl_get_context(dev);
-
-	if (ctx) {
-		if (ctx->status == STARTED) {
-			dev_err(&dev->dev, "Default context started\n");
-			return;
-		}
-		dev->dev.archdata.cxl_ctx = NULL;
-		cxl_release_context(ctx);
-	}
-}
-/* exported via cxl_base */
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 7fd0bdc1436a..7908633d9204 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -9,7 +9,6 @@
 
 #include <linux/pci.h>
 #include <misc/cxl.h>
-#include <asm/pnv-pci.h>
 #include "cxl.h"
 
 static int cxl_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
@@ -45,6 +44,7 @@ static bool cxl_pci_enable_device_hook(struct pci_dev *dev)
 {
 	struct pci_controller *phb;
 	struct cxl_afu *afu;
+	struct cxl_context *ctx;
 
 	phb = pci_bus_to_host(dev->bus);
 	afu = (struct cxl_afu *)phb->private_data;
@@ -57,7 +57,30 @@ static bool cxl_pci_enable_device_hook(struct pci_dev *dev)
 	set_dma_ops(&dev->dev, &dma_nommu_ops);
 	set_dma_offset(&dev->dev, PAGE_OFFSET);
 
-	return _cxl_pci_associate_default_context(dev, afu);
+	/*
+	 * Allocate a context to do cxl things too.  If we eventually do real
+	 * DMA ops, we'll need a default context to attach them to
+	 */
+	ctx = cxl_dev_context_init(dev);
+	if (IS_ERR(ctx))
+		return false;
+	dev->dev.archdata.cxl_ctx = ctx;
+
+	return (cxl_ops->afu_check_and_enable(afu) == 0);
+}
+
+static void cxl_pci_disable_device(struct pci_dev *dev)
+{
+	struct cxl_context *ctx = cxl_get_context(dev);
+
+	if (ctx) {
+		if (ctx->status == STARTED) {
+			dev_err(&dev->dev, "Default context started\n");
+			return;
+		}
+		dev->dev.archdata.cxl_ctx = NULL;
+		cxl_release_context(ctx);
+	}
 }
 
 static resource_size_t cxl_pci_window_alignment(struct pci_bus *bus,
@@ -191,8 +214,8 @@ static struct pci_controller_ops cxl_pci_controller_ops =
 {
 	.probe_mode = cxl_pci_probe_mode,
 	.enable_device_hook = cxl_pci_enable_device_hook,
-	.disable_device = _cxl_pci_disable_device,
-	.release_device = _cxl_pci_disable_device,
+	.disable_device = cxl_pci_disable_device,
+	.release_device = cxl_pci_disable_device,
 	.window_alignment = cxl_pci_window_alignment,
 	.reset_secondary_bus = cxl_pci_reset_secondary_bus,
 	.setup_msi_irqs = cxl_setup_msi_irqs,
@@ -284,18 +307,13 @@ void cxl_pci_vphb_remove(struct cxl_afu *afu)
 	 */
 }
 
-static bool _cxl_pci_is_vphb_device(struct pci_controller *phb)
-{
-	return (phb->ops == &cxl_pcie_pci_ops);
-}
-
 bool cxl_pci_is_vphb_device(struct pci_dev *dev)
 {
 	struct pci_controller *phb;
 
 	phb = pci_bus_to_host(dev->bus);
 
-	return _cxl_pci_is_vphb_device(phb);
+	return (phb->ops == &cxl_pcie_pci_ops);
 }
 
 struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev)
@@ -304,13 +322,7 @@ struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev)
 
 	phb = pci_bus_to_host(dev->bus);
 
-	if (_cxl_pci_is_vphb_device(phb))
-		return (struct cxl_afu *)phb->private_data;
-
-	if (pnv_pci_on_cxl_phb(dev))
-		return pnv_cxl_phb_to_afu(phb);
-
-	return ERR_PTR(-ENODEV);
+	return (struct cxl_afu *)phb->private_data;
 }
 EXPORT_SYMBOL_GPL(cxl_pci_to_afu);