[PATCH] i2o: remove new configuration API

Remove new configuration API from i2o_config

The API-patch is still available from the I2O website (which is mentioned in
the kernel config now).  It is removed because it creates a new binary
sysfs-attribute, which doesn't have the limitiation of 4k.  Expect for the
Adaptec controllers, which has a limitation in the hardware this attribute
doesn't make sense anywhere else.  Until the sysfs API provides an attribute
which doesn't buffer (like firmware) and let access to at least 64k blocks i
provide a separate patch...

(akpm: basically, this API was introduced post-2.6.12 and Markus wants to pull
it out before 2.6.13).

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2 files changed, 3 insertions, 494 deletions

diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
index 06e8eb19a05c..43a942a29c2e 100644
--- a/drivers/message/i2o/Kconfig
+++ b/drivers/message/i2o/Kconfig
@@ -53,6 +53,9 @@ config I2O_CONFIG
 	  To compile this support as a module, choose M here: the
 	  module will be called i2o_config.
 
+	  Note: If you want to use the new API you have to download the
+	  i2o_config patch from http://i2o.shadowconnect.com/
+
 config I2O_CONFIG_OLD_IOCTL
 	bool "Enable ioctls (OBSOLETE)"
 	depends on I2O_CONFIG
diff --git a/drivers/message/i2o/config-osm.c b/drivers/message/i2o/config-osm.c
index fe2e7afc9eae..af32ab4e90cd 100644
--- a/drivers/message/i2o/config-osm.c
+++ b/drivers/message/i2o/config-osm.c
@@ -30,503 +30,9 @@
 
 static struct i2o_driver i2o_config_driver;
 
-/* Special file operations for sysfs */
-struct fops_attribute {
-	struct bin_attribute bin;
-	struct file_operations fops;
-};
-
-/**
- *	sysfs_read_dummy
- */
-static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset,
-				size_t count)
-{
-	return 0;
-};
-
-/**
- *	sysfs_write_dummy
- */
-static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset,
-				 size_t count)
-{
-	return 0;
-};
-
-/**
- *	sysfs_create_fops_file - Creates attribute with special file operations
- *	@kobj: kobject which should contains the attribute
- *	@attr: attributes which should be used to create file
- *
- *	First creates attribute @attr in kobject @kobj. If it is the first time
- *	this function is called, merge old fops from sysfs with new one and
- *	write it back. Afterwords the new fops will be set for the created
- *	attribute.
- *
- *	Returns 0 on success or negative error code on failure.
- */
-static int sysfs_create_fops_file(struct kobject *kobj,
-				  struct fops_attribute *attr)
-{
-	struct file_operations tmp, *fops;
-	struct dentry *d;
-	struct qstr qstr;
-	int rc;
-
-	fops = &attr->fops;
-
-	if (fops->read)
-		attr->bin.read = sysfs_read_dummy;
-
-	if (fops->write)
-		attr->bin.write = sysfs_write_dummy;
-
-	if ((rc = sysfs_create_bin_file(kobj, &attr->bin)))
-		return rc;
-
-	qstr.name = attr->bin.attr.name;
-	qstr.len = strlen(qstr.name);
-	qstr.hash = full_name_hash(qstr.name, qstr.len);
-
-	if ((d = lookup_hash(&qstr, kobj->dentry))) {
-		if (!fops->owner) {
-			memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp));
-			if (fops->read)
-				tmp.read = fops->read;
-			if (fops->write)
-				tmp.write = fops->write;
-			memcpy(fops, &tmp, sizeof(tmp));
-		}
-
-		d->d_inode->i_fop = fops;
-	} else
-		sysfs_remove_bin_file(kobj, &attr->bin);
-
-	return -ENOENT;
-};
-
-/**
- *	sysfs_remove_fops_file - Remove attribute with special file operations
- *	@kobj: kobject which contains the attribute
- *	@attr: attributes which are used to create file
- *
- *	Only wrapper arround sysfs_remove_bin_file()
- *
- *	Returns 0 on success or negative error code on failure.
- */
-static inline int sysfs_remove_fops_file(struct kobject *kobj,
-					 struct fops_attribute *attr)
-{
-	return sysfs_remove_bin_file(kobj, &attr->bin);
-};
-
-/**
- *	i2o_config_read_hrt - Returns the HRT of the controller
- *	@kob: kernel object handle
- *	@buf: buffer into which the HRT should be copied
- *	@off: file offset
- *	@count: number of bytes to read
- *
- *	Put @count bytes starting at @off into @buf from the HRT of the I2O
- *	controller corresponding to @kobj.
- *
- *	Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf,
-				   loff_t offset, size_t count)
-{
-	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
-	i2o_hrt *hrt = c->hrt.virt;
-
-	u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4;
-
-	if (offset > size)
-		return 0;
-
-	if (offset + count > size)
-		count = size - offset;
-
-	memcpy(buf, (u8 *) hrt + offset, count);
-
-	return count;
-};
-
-/**
- *	i2o_config_read_lct - Returns the LCT of the controller
- *	@kob: kernel object handle
- *	@buf: buffer into which the LCT should be copied
- *	@off: file offset
- *	@count: number of bytes to read
- *
- *	Put @count bytes starting at @off into @buf from the LCT of the I2O
- *	controller corresponding to @kobj.
- *
- *	Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf,
-				   loff_t offset, size_t count)
-{
-	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
-	u32 size = c->lct->table_size * 4;
-
-	if (offset > size)
-		return 0;
-
-	if (offset + count > size)
-		count = size - offset;
-
-	memcpy(buf, (u8 *) c->lct + offset, count);
-
-	return count;
-};
-
-#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \
-static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \
-	return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \
-};\
-\
-static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \
-	return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \
-}; \
-\
-static struct fops_attribute i2o_config_attr_##_name = { \
-	.bin = { .attr = { .name = __stringify(_name), .mode = _mode, \
-			   .owner = THIS_MODULE }, \
-		 .size = 0, }, \
-	.fops = { .write = i2o_config_##_name##_write, \
-		  .read = i2o_config_##_name##_read} \
-};
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-
-/**
- *	i2o_config_dpt_reagion - Converts type and id to flash region
- *	@swtype: type of software module reading
- *	@swid: id of software which should be read
- *
- *	Converts type and id from I2O spec to the matching region for DPT /
- *	Adaptec controllers.
- *
- *	Returns region which match type and id or -1 on error.
- */
-static u32 i2o_config_dpt_region(u8 swtype, u8 swid)
-{
-	switch (swtype) {
-	case I2O_SOFTWARE_MODULE_IRTOS:
-		/*
-		 * content: operation firmware
-		 * region size:
-		 *      0xbc000 for 2554, 3754, 2564, 3757
-		 *      0x170000 for 2865
-		 *      0x17c000 for 3966
-		 */
-		if (!swid)
-			return 0;
-
-		break;
-
-	case I2O_SOFTWARE_MODULE_IOP_PRIVATE:
-		/*
-		 * content: BIOS and SMOR
-		 * BIOS size: first 0x8000 bytes
-		 * region size:
-		 *      0x40000 for 2554, 3754, 2564, 3757
-		 *      0x80000 for 2865, 3966
-		 */
-		if (!swid)
-			return 1;
-
-		break;
-
-	case I2O_SOFTWARE_MODULE_IOP_CONFIG:
-		switch (swid) {
-		case 0:
-			/*
-			 * content: NVRAM defaults
-			 * region size: 0x2000 bytes
-			 */
-			return 2;
-		case 1:
-			/*
-			 * content: serial number
-			 * region size: 0x2000 bytes
-			 */
-			return 3;
-		}
-		break;
-	}
-
-	return -1;
-};
-
-#endif
-
-/**
- *	i2o_config_sw_read - Read a software module from controller
- *	@file: file pointer
- *	@buf: buffer into which the data should be copied
- *	@count: number of bytes to read
- *	@off: file offset
- *	@swtype: type of software module reading
- *	@swid: id of software which should be read
- *
- *	Transfers @count bytes at offset @offset from IOP into buffer using
- *	type @swtype and id @swid as described in I2O spec.
- *
- *	Returns number of bytes copied into buffer or error code on failure.
- */
-static ssize_t i2o_config_sw_read(struct file *file, char __user * buf,
-				  size_t count, loff_t * offset, u8 swtype,
-				  u32 swid)
-{
-	struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
-	struct kobject *kobj = sd->s_element;
-	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
-	u32 m, function = I2O_CMD_SW_UPLOAD;
-	struct i2o_dma buffer;
-	struct i2o_message __iomem *msg;
-	u32 __iomem *mptr;
-	int rc, status;
-
-	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
-	if (m == I2O_QUEUE_EMPTY)
-		return -EBUSY;
-
-	mptr = &msg->body[3];
-
-	if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) {
-		i2o_msg_nop(c, m);
-		return rc;
-	}
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (c->adaptec) {
-		mptr = &msg->body[4];
-		function = I2O_CMD_PRIVATE;
-
-		writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
-
-		writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ,
-		       &msg->body[0]);
-		writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
-		writel(*offset, &msg->body[2]);
-		writel(count, &msg->body[3]);
-	} else
-#endif
-		writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
-
-	writel(0xD0000000 | count, mptr++);
-	writel(buffer.phys, mptr);
-
-	writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
-	writel(i2o_config_driver.context, &msg->u.head[2]);
-	writel(0, &msg->u.head[3]);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (!c->adaptec)
-#endif
-	{
-		writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
-		writel(0, &msg->body[1]);
-		writel(swid, &msg->body[2]);
-	}
-
-	status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
-
-	if (status == I2O_POST_WAIT_OK) {
-		if (!(rc = copy_to_user(buf, buffer.virt, count))) {
-			rc = count;
-			*offset += count;
-		}
-	} else
-		rc = -EIO;
-
-	if (status != -ETIMEDOUT)
-		i2o_dma_free(&c->pdev->dev, &buffer);
-
-	return rc;
-};
-
-/**
- *	i2o_config_sw_write - Write a software module to controller
- *	@file: file pointer
- *	@buf: buffer into which the data should be copied
- *	@count: number of bytes to read
- *	@off: file offset
- *	@swtype: type of software module writing
- *	@swid: id of software which should be written
- *
- *	Transfers @count bytes at offset @offset from buffer to IOP using
- *	type @swtype and id @swid as described in I2O spec.
- *
- *	Returns number of bytes copied from buffer or error code on failure.
- */
-static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf,
-				   size_t count, loff_t * offset, u8 swtype,
-				   u32 swid)
-{
-	struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
-	struct kobject *kobj = sd->s_element;
-	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
-	u32 m, function = I2O_CMD_SW_DOWNLOAD;
-	struct i2o_dma buffer;
-	struct i2o_message __iomem *msg;
-	u32 __iomem *mptr;
-	int rc, status;
-
-	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
-	if (m == I2O_QUEUE_EMPTY)
-		return -EBUSY;
-
-	mptr = &msg->body[3];
-
-	if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL)))
-		goto nop_msg;
-
-	if ((rc = copy_from_user(buffer.virt, buf, count)))
-		goto free_buffer;
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (c->adaptec) {
-		mptr = &msg->body[4];
-		function = I2O_CMD_PRIVATE;
-
-		writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
-
-		writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE,
-		       &msg->body[0]);
-		writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
-		writel(*offset, &msg->body[2]);
-		writel(count, &msg->body[3]);
-	} else
-#endif
-		writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
-
-	writel(0xD4000000 | count, mptr++);
-	writel(buffer.phys, mptr);
-
-	writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
-	writel(i2o_config_driver.context, &msg->u.head[2]);
-	writel(0, &msg->u.head[3]);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (!c->adaptec)
-#endif
-	{
-		writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
-		writel(0, &msg->body[1]);
-		writel(swid, &msg->body[2]);
-	}
-
-	status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
-
-	if (status != -ETIMEDOUT)
-		i2o_dma_free(&c->pdev->dev, &buffer);
-
-	if (status != I2O_POST_WAIT_OK)
-		return -EIO;
-
-	*offset += count;
-
-	return count;
-
-      free_buffer:
-	i2o_dma_free(&c->pdev->dev, &buffer);
-
-      nop_msg:
-	i2o_msg_nop(c, m);
-
-	return rc;
-};
-
-/* attribute for HRT in sysfs */
-static struct bin_attribute i2o_config_hrt_attr = {
-	.attr = {
-		 .name = "hrt",
-		 .mode = S_IRUGO,
-		 .owner = THIS_MODULE},
-	.size = 0,
-	.read = i2o_config_read_hrt
-};
-
-/* attribute for LCT in sysfs */
-static struct bin_attribute i2o_config_lct_attr = {
-	.attr = {
-		 .name = "lct",
-		 .mode = S_IRUGO,
-		 .owner = THIS_MODULE},
-	.size = 0,
-	.read = i2o_config_read_lct
-};
-
-/* IRTOS firmware access */
-I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-
-/*
- * attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec
- * controllers
- */
-I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0);
-I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0);
-I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1);
-
-#endif
-
-/**
- *	i2o_config_notify_controller_add - Notify of added controller
- *	@c: the controller which was added
- *
- *	If a I2O controller is added, we catch the notification to add sysfs
- *	entries.
- */
-static void i2o_config_notify_controller_add(struct i2o_controller *c)
-{
-	struct kobject *kobj = &c->exec->device.kobj;
-
-	sysfs_create_bin_file(kobj, &i2o_config_hrt_attr);
-	sysfs_create_bin_file(kobj, &i2o_config_lct_attr);
-
-	sysfs_create_fops_file(kobj, &i2o_config_attr_irtos);
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (c->adaptec) {
-		sysfs_create_fops_file(kobj, &i2o_config_attr_bios);
-		sysfs_create_fops_file(kobj, &i2o_config_attr_nvram);
-		sysfs_create_fops_file(kobj, &i2o_config_attr_serial);
-	}
-#endif
-};
-
-/**
- *	i2o_config_notify_controller_remove - Notify of removed controller
- *	@c: the controller which was removed
- *
- *	If a I2O controller is removed, we catch the notification to remove the
- *	sysfs entries.
- */
-static void i2o_config_notify_controller_remove(struct i2o_controller *c)
-{
-	struct kobject *kobj = &c->exec->device.kobj;
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-	if (c->adaptec) {
-		sysfs_remove_fops_file(kobj, &i2o_config_attr_serial);
-		sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram);
-		sysfs_remove_fops_file(kobj, &i2o_config_attr_bios);
-	}
-#endif
-	sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos);
-
-	sysfs_remove_bin_file(kobj, &i2o_config_lct_attr);
-	sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr);
-};
-
 /* Config OSM driver struct */
 static struct i2o_driver i2o_config_driver = {
 	.name = OSM_NAME,
-	.notify_controller_add = i2o_config_notify_controller_add,
-	.notify_controller_remove = i2o_config_notify_controller_remove
 };
 
 #ifdef CONFIG_I2O_CONFIG_OLD_IOCTL