[media] move ati_remote driver from input/misc to media/rc

The driver will be migrated to the RC driver API in a following
commit.

[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 886 insertions, 2 deletions

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 899f783d92fb..756884e007e6 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -4,8 +4,8 @@ menuconfig RC_CORE
 	default INPUT
 	---help---
 	  Enable support for Remote Controllers on Linux. This is
-	  needed in order to support several video capture adapters.
-	  Currently, all supported devices use InfraRed.
+	  needed in order to support several video capture adapters,
+	  standalone IR receivers/transmitters, and RF receivers.
 
 	  Enable this option if you have a video capture board even
 	  if you don't need IR, as otherwise, you may not be able to
@@ -108,6 +108,22 @@ config IR_LIRC_CODEC
 	   Enable this option to pass raw IR to and from userspace via
 	   the LIRC interface.
 
+config RC_ATI_REMOTE
+	tristate "ATI / X10 USB RF remote control"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	   Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+	   These are RF remotes with USB receivers.
+	   The ATI remote comes with many of ATI's All-In-Wonder video cards.
+	   The X10 "Lola" remote is available at:
+	      <http://www.x10.com/products/lola_sg1.htm>
+	   This driver provides mouse pointer, left and right mouse buttons,
+	   and maps all the other remote buttons to keypress events.
+
+	   To compile this driver as a module, choose M here: the module will be
+	   called ati_remote.
+
 config IR_ENE
 	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 	depends on PNP
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index f224db027c41..2156e786b557 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o
 obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 
 # stand-alone IR receivers/transmitters
+obj-$(CONFIG_RC_ATI_REMOTE) += ati_remote.o
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
new file mode 100644
index 000000000000..53388a558a57
--- /dev/null
+++ b/drivers/media/rc/ati_remote.c
@@ -0,0 +1,867 @@
+/*
+ *  USB ATI Remote support
+ *
+ *  Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
+ *  Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
+ *
+ *  This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
+ *  porting to the 2.6 kernel interfaces, along with other modification
+ *  to better match the style of the existing usb/input drivers.  However, the
+ *  protocol and hardware handling is essentially unchanged from 2.1.1.
+ *
+ *  The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
+ *  Vojtech Pavlik.
+ *
+ *  Changes:
+ *
+ *  Feb 2004: Torrey Hoffman <thoffman@arnor.net>
+ *            Version 2.2.0
+ *  Jun 2004: Torrey Hoffman <thoffman@arnor.net>
+ *            Version 2.2.1
+ *            Added key repeat support contributed by:
+ *                Vincent Vanackere <vanackere@lif.univ-mrs.fr>
+ *            Added support for the "Lola" remote contributed by:
+ *                Seth Cohn <sethcohn@yahoo.com>
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * Hardware & software notes
+ *
+ * These remote controls are distributed by ATI as part of their
+ * "All-In-Wonder" video card packages.  The receiver self-identifies as a
+ * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
+ *
+ * The "Lola" remote is available from X10.  See:
+ *    http://www.x10.com/products/lola_sg1.htm
+ * The Lola is similar to the ATI remote but has no mouse support, and slightly
+ * different keys.
+ *
+ * It is possible to use multiple receivers and remotes on multiple computers
+ * simultaneously by configuring them to use specific channels.
+ *
+ * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
+ * Actually, it may even support more, at least in some revisions of the
+ * hardware.
+ *
+ * Each remote can be configured to transmit on one channel as follows:
+ *   - Press and hold the "hand icon" button.
+ *   - When the red LED starts to blink, let go of the "hand icon" button.
+ *   - When it stops blinking, input the channel code as two digits, from 01
+ *     to 16, and press the hand icon again.
+ *
+ * The timing can be a little tricky.  Try loading the module with debug=1
+ * to have the kernel print out messages about the remote control number
+ * and mask.  Note: debugging prints remote numbers as zero-based hexadecimal.
+ *
+ * The driver has a "channel_mask" parameter. This bitmask specifies which
+ * channels will be ignored by the module.  To mask out channels, just add
+ * all the 2^channel_number values together.
+ *
+ * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
+ * ignore signals coming from remote controls transmitting on channel 4, but
+ * accept all other channels.
+ *
+ * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
+ * ignored.
+ *
+ * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
+ * parameter are unused.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/wait.h>
+#include <linux/jiffies.h>
+
+/*
+ * Module and Version Information, Module Parameters
+ */
+
+#define ATI_REMOTE_VENDOR_ID		0x0bc7
+#define LOLA_REMOTE_PRODUCT_ID		0x0002
+#define LOLA2_REMOTE_PRODUCT_ID		0x0003
+#define ATI_REMOTE_PRODUCT_ID		0x0004
+#define NVIDIA_REMOTE_PRODUCT_ID	0x0005
+#define MEDION_REMOTE_PRODUCT_ID	0x0006
+
+#define DRIVER_VERSION		"2.2.1"
+#define DRIVER_AUTHOR           "Torrey Hoffman <thoffman@arnor.net>"
+#define DRIVER_DESC             "ATI/X10 RF USB Remote Control"
+
+#define NAME_BUFSIZE      80    /* size of product name, path buffers */
+#define DATA_BUFSIZE      63    /* size of URB data buffers */
+
+/*
+ * Duplicate event filtering time.
+ * Sequential, identical KIND_FILTERED inputs with less than
+ * FILTER_TIME milliseconds between them are considered as repeat
+ * events. The hardware generates 5 events for the first keypress
+ * and we have to take this into account for an accurate repeat
+ * behaviour.
+ */
+#define FILTER_TIME	60 /* msec */
+#define REPEAT_DELAY	500 /* msec */
+
+static unsigned long channel_mask;
+module_param(channel_mask, ulong, 0644);
+MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+static int repeat_filter = FILTER_TIME;
+module_param(repeat_filter, int, 0644);
+MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
+
+static int repeat_delay = REPEAT_DELAY;
+module_param(repeat_delay, int, 0644);
+MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
+
+#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
+#undef err
+#define err(format, arg...) printk(KERN_ERR format , ## arg)
+
+static struct usb_device_id ati_remote_table[] = {
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) },
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) },
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
+	{}	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ati_remote_table);
+
+/* Get hi and low bytes of a 16-bits int */
+#define HI(a)	((unsigned char)((a) >> 8))
+#define LO(a)	((unsigned char)((a) & 0xff))
+
+#define SEND_FLAG_IN_PROGRESS	1
+#define SEND_FLAG_COMPLETE	2
+
+/* Device initialization strings */
+static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
+static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
+
+struct ati_remote {
+	struct input_dev *idev;
+	struct usb_device *udev;
+	struct usb_interface *interface;
+
+	struct urb *irq_urb;
+	struct urb *out_urb;
+	struct usb_endpoint_descriptor *endpoint_in;
+	struct usb_endpoint_descriptor *endpoint_out;
+	unsigned char *inbuf;
+	unsigned char *outbuf;
+	dma_addr_t inbuf_dma;
+	dma_addr_t outbuf_dma;
+
+	unsigned char old_data[2];  /* Detect duplicate events */
+	unsigned long old_jiffies;
+	unsigned long acc_jiffies;  /* handle acceleration */
+	unsigned long first_jiffies;
+
+	unsigned int repeat_count;
+
+	char name[NAME_BUFSIZE];
+	char phys[NAME_BUFSIZE];
+
+	wait_queue_head_t wait;
+	int send_flags;
+};
+
+/* "Kinds" of messages sent from the hardware to the driver. */
+#define KIND_END        0
+#define KIND_LITERAL    1   /* Simply pass to input system */
+#define KIND_FILTERED   2   /* Add artificial key-up events, drop keyrepeats */
+#define KIND_LU         3   /* Directional keypad diagonals - left up, */
+#define KIND_RU         4   /*   right up,  */
+#define KIND_LD         5   /*   left down, */
+#define KIND_RD         6   /*   right down */
+#define KIND_ACCEL      7   /* Directional keypad - left, right, up, down.*/
+
+/* Translation table from hardware messages to input events. */
+static const struct {
+	short kind;
+	unsigned char data1, data2;
+	int type;
+	unsigned int code;
+	int value;
+}  ati_remote_tbl[] = {
+	/* Directional control pad axes */
+	{KIND_ACCEL,   0x35, 0x70, EV_REL, REL_X, -1},	 /* left */
+	{KIND_ACCEL,   0x36, 0x71, EV_REL, REL_X, 1},    /* right */
+	{KIND_ACCEL,   0x37, 0x72, EV_REL, REL_Y, -1},	 /* up */
+	{KIND_ACCEL,   0x38, 0x73, EV_REL, REL_Y, 1},    /* down */
+	/* Directional control pad diagonals */
+	{KIND_LU,      0x39, 0x74, EV_REL, 0, 0},        /* left up */
+	{KIND_RU,      0x3a, 0x75, EV_REL, 0, 0},        /* right up */
+	{KIND_LD,      0x3c, 0x77, EV_REL, 0, 0},        /* left down */
+	{KIND_RD,      0x3b, 0x76, EV_REL, 0, 0},        /* right down */
+
+	/* "Mouse button" buttons */
+	{KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
+	{KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
+	{KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
+	{KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
+
+	/* Artificial "doubleclick" events are generated by the hardware.
+	 * They are mapped to the "side" and "extra" mouse buttons here. */
+	{KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
+	{KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
+
+	/* keyboard. */
+	{KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
+	{KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
+	{KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
+	{KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
+	{KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
+	{KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
+	{KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
+	{KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
+	{KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
+	{KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
+	{KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
+	{KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
+	{KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
+	{KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
+	{KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
+	{KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
+
+	/* "special" keys */
+	{KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1},    /* "check" */
+	{KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1},       /* "menu" */
+	{KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1},      /* Power */
+	{KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1},         /* TV */
+	{KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1},        /* DVD */
+	{KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1},        /* WEB */
+	{KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1},  /* "book" */
+	{KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1},       /* "hand" */
+	{KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1},     /* "timer" */
+	{KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1},      /* "max" */
+	{KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1},       /* left */
+	{KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1},      /* right */
+	{KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1},       /* down */
+	{KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1},         /* up */
+	{KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1},         /* "OK" */
+	{KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
+	{KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1},   /* VOL - */
+	{KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1},       /* MUTE  */
+	{KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1},  /* CH + */
+	{KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
+	{KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1},     /* ( o) red */
+	{KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1},       /* ( >) */
+	{KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1},     /* (<<) */
+	{KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1},    /* (>>) */
+	{KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1},       /* ([]) */
+	{KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1},      /* ('') */
+	{KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1},   /* (<-) */
+	{KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1},       /* (>+) */
+	{KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1},       /* PLAYING */
+	{KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1},       /* TOP */
+	{KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1},        /* END */
+	{KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1},     /* SELECT */
+
+	{KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
+};
+
+/* Local function prototypes */
+static int ati_remote_open		(struct input_dev *inputdev);
+static void ati_remote_close		(struct input_dev *inputdev);
+static int ati_remote_sendpacket	(struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
+static void ati_remote_irq_out		(struct urb *urb);
+static void ati_remote_irq_in		(struct urb *urb);
+static void ati_remote_input_report	(struct urb *urb);
+static int ati_remote_initialize	(struct ati_remote *ati_remote);
+static int ati_remote_probe		(struct usb_interface *interface, const struct usb_device_id *id);
+static void ati_remote_disconnect	(struct usb_interface *interface);
+
+/* usb specific object to register with the usb subsystem */
+static struct usb_driver ati_remote_driver = {
+	.name         = "ati_remote",
+	.probe        = ati_remote_probe,
+	.disconnect   = ati_remote_disconnect,
+	.id_table     = ati_remote_table,
+};
+
+/*
+ *	ati_remote_dump_input
+ */
+static void ati_remote_dump(struct device *dev, unsigned char *data,
+			    unsigned int len)
+{
+	if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
+		dev_warn(dev, "Weird byte 0x%02x\n", data[0]);
+	else if (len == 4)
+		dev_warn(dev, "Weird key %02x %02x %02x %02x\n",
+		     data[0], data[1], data[2], data[3]);
+	else
+		dev_warn(dev, "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n",
+		     len, data[0], data[1], data[2], data[3], data[4], data[5]);
+}
+
+/*
+ *	ati_remote_open
+ */
+static int ati_remote_open(struct input_dev *inputdev)
+{
+	struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+
+	/* On first open, submit the read urb which was set up previously. */
+	ati_remote->irq_urb->dev = ati_remote->udev;
+	if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
+		dev_err(&ati_remote->interface->dev,
+			"%s: usb_submit_urb failed!\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ *	ati_remote_close
+ */
+static void ati_remote_close(struct input_dev *inputdev)
+{
+	struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+
+	usb_kill_urb(ati_remote->irq_urb);
+}
+
+/*
+ *		ati_remote_irq_out
+ */
+static void ati_remote_irq_out(struct urb *urb)
+{
+	struct ati_remote *ati_remote = urb->context;
+
+	if (urb->status) {
+		dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
+			__func__, urb->status);
+		return;
+	}
+
+	ati_remote->send_flags |= SEND_FLAG_COMPLETE;
+	wmb();
+	wake_up(&ati_remote->wait);
+}
+
+/*
+ *	ati_remote_sendpacket
+ *
+ *	Used to send device initialization strings
+ */
+static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
+{
+	int retval = 0;
+
+	/* Set up out_urb */
+	memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
+	((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
+
+	ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
+	ati_remote->out_urb->dev = ati_remote->udev;
+	ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
+
+	retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
+	if (retval) {
+		dev_dbg(&ati_remote->interface->dev,
+			 "sendpacket: usb_submit_urb failed: %d\n", retval);
+		return retval;
+	}
+
+	wait_event_timeout(ati_remote->wait,
+		((ati_remote->out_urb->status != -EINPROGRESS) ||
+			(ati_remote->send_flags & SEND_FLAG_COMPLETE)),
+		HZ);
+	usb_kill_urb(ati_remote->out_urb);
+
+	return retval;
+}
+
+/*
+ *	ati_remote_event_lookup
+ */
+static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
+{
+	int i;
+
+	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
+		/*
+		 * Decide if the table entry matches the remote input.
+		 */
+		if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
+		    ((((ati_remote_tbl[i].data1 >> 4) -
+		       (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
+		    (ati_remote_tbl[i].data2 == d2))
+			return i;
+
+	}
+	return -1;
+}
+
+/*
+ *	ati_remote_compute_accel
+ *
+ * Implements acceleration curve for directional control pad
+ * If elapsed time since last event is > 1/4 second, user "stopped",
+ * so reset acceleration. Otherwise, user is probably holding the control
+ * pad down, so we increase acceleration, ramping up over two seconds to
+ * a maximum speed.
+ */
+static int ati_remote_compute_accel(struct ati_remote *ati_remote)
+{
+	static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
+	unsigned long now = jiffies;
+	int acc;
+
+	if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
+		acc = 1;
+		ati_remote->acc_jiffies = now;
+	}
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
+		acc = accel[0];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
+		acc = accel[1];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
+		acc = accel[2];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
+		acc = accel[3];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
+		acc = accel[4];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
+		acc = accel[5];
+	else
+		acc = accel[6];
+
+	return acc;
+}
+
+/*
+ *	ati_remote_report_input
+ */
+static void ati_remote_input_report(struct urb *urb)
+{
+	struct ati_remote *ati_remote = urb->context;
+	unsigned char *data= ati_remote->inbuf;
+	struct input_dev *dev = ati_remote->idev;
+	int index, acc;
+	int remote_num;
+
+	/* Deal with strange looking inputs */
+	if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
+		((data[3] & 0x0f) != 0x00) ) {
+		ati_remote_dump(&urb->dev->dev, data, urb->actual_length);
+		return;
+	}
+
+	/* Mask unwanted remote channels.  */
+	/* note: remote_num is 0-based, channel 1 on remote == 0 here */
+	remote_num = (data[3] >> 4) & 0x0f;
+	if (channel_mask & (1 << (remote_num + 1))) {
+		dbginfo(&ati_remote->interface->dev,
+			"Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
+			remote_num, data[1], data[2], channel_mask);
+		return;
+	}
+
+	/* Look up event code index in translation table */
+	index = ati_remote_event_lookup(remote_num, data[1], data[2]);
+	if (index < 0) {
+		dev_warn(&ati_remote->interface->dev,
+			 "Unknown input from channel 0x%02x: data %02x,%02x\n",
+			 remote_num, data[1], data[2]);
+		return;
+	}
+	dbginfo(&ati_remote->interface->dev,
+		"channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
+		remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
+
+	if (ati_remote_tbl[index].kind == KIND_LITERAL) {
+		input_event(dev, ati_remote_tbl[index].type,
+			ati_remote_tbl[index].code,
+			ati_remote_tbl[index].value);
+		input_sync(dev);
+
+		ati_remote->old_jiffies = jiffies;
+		return;
+	}
+
+	if (ati_remote_tbl[index].kind == KIND_FILTERED) {
+		unsigned long now = jiffies;
+
+		/* Filter duplicate events which happen "too close" together. */
+		if (ati_remote->old_data[0] == data[1] &&
+		    ati_remote->old_data[1] == data[2] &&
+		    time_before(now, ati_remote->old_jiffies +
+				     msecs_to_jiffies(repeat_filter))) {
+			ati_remote->repeat_count++;
+		} else {
+			ati_remote->repeat_count = 0;
+			ati_remote->first_jiffies = now;
+		}
+
+		ati_remote->old_data[0] = data[1];
+		ati_remote->old_data[1] = data[2];
+		ati_remote->old_jiffies = now;
+
+		/* Ensure we skip at least the 4 first duplicate events (generated
+		 * by a single keypress), and continue skipping until repeat_delay
+		 * msecs have passed
+		 */
+		if (ati_remote->repeat_count > 0 &&
+		    (ati_remote->repeat_count < 5 ||
+		     time_before(now, ati_remote->first_jiffies +
+				      msecs_to_jiffies(repeat_delay))))
+			return;
+
+
+		input_event(dev, ati_remote_tbl[index].type,
+			ati_remote_tbl[index].code, 1);
+		input_sync(dev);
+		input_event(dev, ati_remote_tbl[index].type,
+			ati_remote_tbl[index].code, 0);
+		input_sync(dev);
+
+	} else {
+
+		/*
+		 * Other event kinds are from the directional control pad, and have an
+		 * acceleration factor applied to them.  Without this acceleration, the
+		 * control pad is mostly unusable.
+		 */
+		acc = ati_remote_compute_accel(ati_remote);
+
+		switch (ati_remote_tbl[index].kind) {
+		case KIND_ACCEL:
+			input_event(dev, ati_remote_tbl[index].type,
+				ati_remote_tbl[index].code,
+				ati_remote_tbl[index].value * acc);
+			break;
+		case KIND_LU:
+			input_report_rel(dev, REL_X, -acc);
+			input_report_rel(dev, REL_Y, -acc);
+			break;
+		case KIND_RU:
+			input_report_rel(dev, REL_X, acc);
+			input_report_rel(dev, REL_Y, -acc);
+			break;
+		case KIND_LD:
+			input_report_rel(dev, REL_X, -acc);
+			input_report_rel(dev, REL_Y, acc);
+			break;
+		case KIND_RD:
+			input_report_rel(dev, REL_X, acc);
+			input_report_rel(dev, REL_Y, acc);
+			break;
+		default:
+			dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
+				ati_remote_tbl[index].kind);
+		}
+		input_sync(dev);
+
+		ati_remote->old_jiffies = jiffies;
+		ati_remote->old_data[0] = data[1];
+		ati_remote->old_data[1] = data[2];
+	}
+}
+
+/*
+ *	ati_remote_irq_in
+ */
+static void ati_remote_irq_in(struct urb *urb)
+{
+	struct ati_remote *ati_remote = urb->context;
+	int retval;
+
+	switch (urb->status) {
+	case 0:			/* success */
+		ati_remote_input_report(urb);
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
+			__func__);
+		return;
+	default:		/* error */
+		dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
+			__func__, urb->status);
+	}
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
+			__func__, retval);
+}
+
+/*
+ *	ati_remote_alloc_buffers
+ */
+static int ati_remote_alloc_buffers(struct usb_device *udev,
+				    struct ati_remote *ati_remote)
+{
+	ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
+					       &ati_remote->inbuf_dma);
+	if (!ati_remote->inbuf)
+		return -1;
+
+	ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
+						&ati_remote->outbuf_dma);
+	if (!ati_remote->outbuf)
+		return -1;
+
+	ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!ati_remote->irq_urb)
+		return -1;
+
+	ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!ati_remote->out_urb)
+		return -1;
+
+	return 0;
+}
+
+/*
+ *	ati_remote_free_buffers
+ */
+static void ati_remote_free_buffers(struct ati_remote *ati_remote)
+{
+	usb_free_urb(ati_remote->irq_urb);
+	usb_free_urb(ati_remote->out_urb);
+
+	usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
+		ati_remote->inbuf, ati_remote->inbuf_dma);
+
+	usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
+		ati_remote->outbuf, ati_remote->outbuf_dma);
+}
+
+static void ati_remote_input_init(struct ati_remote *ati_remote)
+{
+	struct input_dev *idev = ati_remote->idev;
+	int i;
+
+	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+	idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
+		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
+	idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
+		if (ati_remote_tbl[i].type == EV_KEY)
+			set_bit(ati_remote_tbl[i].code, idev->keybit);
+
+	input_set_drvdata(idev, ati_remote);
+
+	idev->open = ati_remote_open;
+	idev->close = ati_remote_close;
+
+	idev->name = ati_remote->name;
+	idev->phys = ati_remote->phys;
+
+	usb_to_input_id(ati_remote->udev, &idev->id);
+	idev->dev.parent = &ati_remote->udev->dev;
+}
+
+static int ati_remote_initialize(struct ati_remote *ati_remote)
+{
+	struct usb_device *udev = ati_remote->udev;
+	int pipe, maxp;
+
+	init_waitqueue_head(&ati_remote->wait);
+
+	/* Set up irq_urb */
+	pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
+	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+	maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
+
+	usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
+			 maxp, ati_remote_irq_in, ati_remote,
+			 ati_remote->endpoint_in->bInterval);
+	ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
+	ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* Set up out_urb */
+	pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
+	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+	maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
+
+	usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
+			 maxp, ati_remote_irq_out, ati_remote,
+			 ati_remote->endpoint_out->bInterval);
+	ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
+	ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* send initialization strings */
+	if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
+	    (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
+		dev_err(&ati_remote->interface->dev,
+			 "Initializing ati_remote hardware failed.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ *	ati_remote_probe
+ */
+static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *iface_host = interface->cur_altsetting;
+	struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
+	struct ati_remote *ati_remote;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+
+	if (iface_host->desc.bNumEndpoints != 2) {
+		err("%s: Unexpected desc.bNumEndpoints\n", __func__);
+		return -ENODEV;
+	}
+
+	endpoint_in = &iface_host->endpoint[0].desc;
+	endpoint_out = &iface_host->endpoint[1].desc;
+
+	if (!usb_endpoint_is_int_in(endpoint_in)) {
+		err("%s: Unexpected endpoint_in\n", __func__);
+		return -ENODEV;
+	}
+	if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
+		err("%s: endpoint_in message size==0? \n", __func__);
+		return -ENODEV;
+	}
+
+	ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ati_remote || !input_dev)
+		goto fail1;
+
+	/* Allocate URB buffers, URBs */
+	if (ati_remote_alloc_buffers(udev, ati_remote))
+		goto fail2;
+
+	ati_remote->endpoint_in = endpoint_in;
+	ati_remote->endpoint_out = endpoint_out;
+	ati_remote->udev = udev;
+	ati_remote->idev = input_dev;
+	ati_remote->interface = interface;
+
+	usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
+	strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
+
+	if (udev->manufacturer)
+		strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
+
+	if (udev->product)
+		snprintf(ati_remote->name, sizeof(ati_remote->name),
+			 "%s %s", ati_remote->name, udev->product);
+
+	if (!strlen(ati_remote->name))
+		snprintf(ati_remote->name, sizeof(ati_remote->name),
+			DRIVER_DESC "(%04x,%04x)",
+			le16_to_cpu(ati_remote->udev->descriptor.idVendor),
+			le16_to_cpu(ati_remote->udev->descriptor.idProduct));
+
+	ati_remote_input_init(ati_remote);
+
+	/* Device Hardware Initialization - fills in ati_remote->idev from udev. */
+	err = ati_remote_initialize(ati_remote);
+	if (err)
+		goto fail3;
+
+	/* Set up and register input device */
+	err = input_register_device(ati_remote->idev);
+	if (err)
+		goto fail3;
+
+	usb_set_intfdata(interface, ati_remote);
+	return 0;
+
+ fail3:	usb_kill_urb(ati_remote->irq_urb);
+	usb_kill_urb(ati_remote->out_urb);
+ fail2:	ati_remote_free_buffers(ati_remote);
+ fail1:	input_free_device(input_dev);
+	kfree(ati_remote);
+	return err;
+}
+
+/*
+ *	ati_remote_disconnect
+ */
+static void ati_remote_disconnect(struct usb_interface *interface)
+{
+	struct ati_remote *ati_remote;
+
+	ati_remote = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+	if (!ati_remote) {
+		dev_warn(&interface->dev, "%s - null device?\n", __func__);
+		return;
+	}
+
+	usb_kill_urb(ati_remote->irq_urb);
+	usb_kill_urb(ati_remote->out_urb);
+	input_unregister_device(ati_remote->idev);
+	ati_remote_free_buffers(ati_remote);
+	kfree(ati_remote);
+}
+
+/*
+ *	ati_remote_init
+ */
+static int __init ati_remote_init(void)
+{
+	int result;
+
+	result = usb_register(&ati_remote_driver);
+	if (result)
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": usb_register error #%d\n", result);
+	else
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+		       DRIVER_DESC "\n");
+
+	return result;
+}
+
+/*
+ *	ati_remote_exit
+ */
+static void __exit ati_remote_exit(void)
+{
+	usb_deregister(&ati_remote_driver);
+}
+
+/*
+ *	module specification
+ */
+
+module_init(ati_remote_init);
+module_exit(ati_remote_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");