diff options
| author | Andrey Konovalov <andrey.konovalov@linaro.org> | 2020-06-12 16:53:48 +0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2020-06-23 16:16:23 +0300 |
| commit | 3909a92d7df622b41b9ceeeea694e641cad7667b (patch) | |
| tree | 7cb7ee56aba1c8676d716698fce410229a1df20b /drivers/media/i2c | |
| parent | 8d2d1bedb1b9af3e0c039a4444858da7b6da71f8 (diff) | |
| download | linux-3909a92d7df622b41b9ceeeea694e641cad7667b.tar.xz | |
media: i2c: imx290: fix reset GPIO pin handling
According to https://www.kernel.org/doc/Documentation/gpio/consumer.txt,
- all of the gpiod_set_value_xxx() functions operate with the *logical*
value. So in imx290_power_on() the reset signal should be cleared
(de-asserted) with gpiod_set_value_cansleep(imx290->rst_gpio, 0), and in
imx290_power_off() the value of 1 must be used to apply/assert the reset
to the sensor. In the device tree the reset pin is described as
GPIO_ACTIVE_LOW, and gpiod_set_value_xxx() functions take this into
account,
- when devm_gpiod_get_optional() is called with GPIOD_ASIS, the GPIO is
not initialized, and the direction must be set later; using a GPIO
without setting its direction first is illegal and will result in undefined
behavior. Fix this by using GPIOD_OUT_HIGH instead of GPIOD_ASIS (this
asserts the reset signal to the sensor initially).
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Diffstat (limited to 'drivers/media/i2c')
| -rw-r--r-- | drivers/media/i2c/imx290.c | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c index d0322f9a8856..7b1de1f0c8b7 100644 --- a/drivers/media/i2c/imx290.c +++ b/drivers/media/i2c/imx290.c @@ -628,7 +628,7 @@ static int imx290_power_on(struct device *dev) } usleep_range(1, 2); - gpiod_set_value_cansleep(imx290->rst_gpio, 1); + gpiod_set_value_cansleep(imx290->rst_gpio, 0); usleep_range(30000, 31000); return 0; @@ -641,7 +641,7 @@ static int imx290_power_off(struct device *dev) struct imx290 *imx290 = to_imx290(sd); clk_disable_unprepare(imx290->xclk); - gpiod_set_value_cansleep(imx290->rst_gpio, 0); + gpiod_set_value_cansleep(imx290->rst_gpio, 1); regulator_bulk_disable(IMX290_NUM_SUPPLIES, imx290->supplies); return 0; @@ -757,7 +757,8 @@ static int imx290_probe(struct i2c_client *client) goto free_err; } - imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); + imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); if (IS_ERR(imx290->rst_gpio)) { dev_err(dev, "Cannot get reset gpio\n"); ret = PTR_ERR(imx290->rst_gpio); |