irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signaling

When a vPE is made resident, the GIC starts parsing the virtual pending
table to deliver pending interrupts. This takes place asynchronously,
and can at times take a long while. Long enough that the vcpu enters
the guest and hits WFI before any interrupt has been signaled yet.
The vcpu then exits, blocks, and now gets a doorbell. Rince, repeat.

In order to avoid the above, a (optional on GICv4, mandatory on v4.1)
feature allows the GIC to feedback to the hypervisor whether it is
done parsing the VPT by clearing the GICR_VPENDBASER.Dirty bit.
The hypervisor can then wait until the GIC is ready before actually
running the vPE.

Plug the detection code as well as polling on vPE schedule. While
at it, tidy-up the kernel message that displays the GICv4 optional
features.

Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

2 files changed, 26 insertions, 4 deletions

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 54d142ccc63a..affd325cc3d4 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -14,6 +14,7 @@
 #include <linux/dma-iommu.h>
 #include <linux/efi.h>
 #include <linux/interrupt.h>
+#include <linux/iopoll.h>
 #include <linux/irqdomain.h>
 #include <linux/list.h>
 #include <linux/log2.h>
@@ -3672,6 +3673,20 @@ out:
 	return IRQ_SET_MASK_OK_DONE;
 }
 
+static void its_wait_vpt_parse_complete(void)
+{
+	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
+	u64 val;
+
+	if (!gic_rdists->has_vpend_valid_dirty)
+		return;
+
+	WARN_ON_ONCE(readq_relaxed_poll_timeout(vlpi_base + GICR_VPENDBASER,
+						val,
+						!(val & GICR_VPENDBASER_Dirty),
+						10, 500));
+}
+
 static void its_vpe_schedule(struct its_vpe *vpe)
 {
 	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
@@ -3702,6 +3717,8 @@ static void its_vpe_schedule(struct its_vpe *vpe)
 	val |= vpe->idai ? GICR_VPENDBASER_IDAI : 0;
 	val |= GICR_VPENDBASER_Valid;
 	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+	its_wait_vpt_parse_complete();
 }
 
 static void its_vpe_deschedule(struct its_vpe *vpe)
@@ -3910,6 +3927,8 @@ static void its_vpe_4_1_schedule(struct its_vpe *vpe,
 	val |= FIELD_PREP(GICR_VPENDBASER_4_1_VPEID, vpe->vpe_id);
 
 	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+	its_wait_vpt_parse_complete();
 }
 
 static void its_vpe_4_1_deschedule(struct its_vpe *vpe,
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 9dbc81b6f62e..d7006ef18a0d 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -873,6 +873,7 @@ static int __gic_update_rdist_properties(struct redist_region *region,
 	gic_data.rdists.has_rvpeid &= !!(typer & GICR_TYPER_RVPEID);
 	gic_data.rdists.has_direct_lpi &= (!!(typer & GICR_TYPER_DirectLPIS) |
 					   gic_data.rdists.has_rvpeid);
+	gic_data.rdists.has_vpend_valid_dirty &= !!(typer & GICR_TYPER_DIRTY);
 
 	/* Detect non-sensical configurations */
 	if (WARN_ON_ONCE(gic_data.rdists.has_rvpeid && !gic_data.rdists.has_vlpis)) {
@@ -893,10 +894,11 @@ static void gic_update_rdist_properties(void)
 	if (WARN_ON(gic_data.ppi_nr == UINT_MAX))
 		gic_data.ppi_nr = 0;
 	pr_info("%d PPIs implemented\n", gic_data.ppi_nr);
-	pr_info("%sVLPI support, %sdirect LPI support, %sRVPEID support\n",
-		!gic_data.rdists.has_vlpis ? "no " : "",
-		!gic_data.rdists.has_direct_lpi ? "no " : "",
-		!gic_data.rdists.has_rvpeid ? "no " : "");
+	if (gic_data.rdists.has_vlpis)
+		pr_info("GICv4 features: %s%s%s\n",
+			gic_data.rdists.has_direct_lpi ? "DirectLPI " : "",
+			gic_data.rdists.has_rvpeid ? "RVPEID " : "",
+			gic_data.rdists.has_vpend_valid_dirty ? "Valid+Dirty " : "");
 }
 
 /* Check whether it's single security state view */
@@ -1620,6 +1622,7 @@ static int __init gic_init_bases(void __iomem *dist_base,
 	gic_data.rdists.has_rvpeid = true;
 	gic_data.rdists.has_vlpis = true;
 	gic_data.rdists.has_direct_lpi = true;
+	gic_data.rdists.has_vpend_valid_dirty = true;
 
 	if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) {
 		err = -ENOMEM;