iommu/vt-d: Move Kconfig and Makefile bits down into intel directory

Move Intel Kconfig and Makefile bits down into intel directory
with the rest of the Intel specific files.

Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200630200636.48600-2-jsnitsel@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>

2 files changed, 93 insertions, 0 deletions

diff --git a/drivers/iommu/intel/Kconfig b/drivers/iommu/intel/Kconfig
new file mode 100644
index 000000000000..877beec9d987
--- /dev/null
+++ b/drivers/iommu/intel/Kconfig
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Intel IOMMU support
+config DMAR_TABLE
+	bool
+
+config INTEL_IOMMU
+	bool "Support for Intel IOMMU using DMA Remapping Devices"
+	depends on PCI_MSI && ACPI && (X86 || IA64)
+	select IOMMU_API
+	select IOMMU_IOVA
+	select NEED_DMA_MAP_STATE
+	select DMAR_TABLE
+	select SWIOTLB
+	select IOASID
+	help
+	  DMA remapping (DMAR) devices support enables independent address
+	  translations for Direct Memory Access (DMA) from devices.
+	  These DMA remapping devices are reported via ACPI tables
+	  and include PCI device scope covered by these DMA
+	  remapping devices.
+
+config INTEL_IOMMU_DEBUGFS
+	bool "Export Intel IOMMU internals in Debugfs"
+	depends on INTEL_IOMMU && IOMMU_DEBUGFS
+	help
+	  !!!WARNING!!!
+
+	  DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!!
+
+	  Expose Intel IOMMU internals in Debugfs.
+
+	  This option is -NOT- intended for production environments, and should
+	  only be enabled for debugging Intel IOMMU.
+
+config INTEL_IOMMU_SVM
+	bool "Support for Shared Virtual Memory with Intel IOMMU"
+	depends on INTEL_IOMMU && X86_64
+	select PCI_PASID
+	select PCI_PRI
+	select MMU_NOTIFIER
+	select IOASID
+	help
+	  Shared Virtual Memory (SVM) provides a facility for devices
+	  to access DMA resources through process address space by
+	  means of a Process Address Space ID (PASID).
+
+config INTEL_IOMMU_DEFAULT_ON
+	def_bool y
+	prompt "Enable Intel DMA Remapping Devices by default"
+	depends on INTEL_IOMMU
+	help
+	  Selecting this option will enable a DMAR device at boot time if
+	  one is found. If this option is not selected, DMAR support can
+	  be enabled by passing intel_iommu=on to the kernel.
+
+config INTEL_IOMMU_BROKEN_GFX_WA
+	bool "Workaround broken graphics drivers (going away soon)"
+	depends on INTEL_IOMMU && BROKEN && X86
+	help
+	  Current Graphics drivers tend to use physical address
+	  for DMA and avoid using DMA APIs. Setting this config
+	  option permits the IOMMU driver to set a unity map for
+	  all the OS-visible memory. Hence the driver can continue
+	  to use physical addresses for DMA, at least until this
+	  option is removed in the 2.6.32 kernel.
+
+config INTEL_IOMMU_FLOPPY_WA
+	def_bool y
+	depends on INTEL_IOMMU && X86
+	help
+	  Floppy disk drivers are known to bypass DMA API calls
+	  thereby failing to work when IOMMU is enabled. This
+	  workaround will setup a 1:1 mapping for the first
+	  16MiB to make floppy (an ISA device) work.
+
+config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
+	bool "Enable Intel IOMMU scalable mode by default"
+	depends on INTEL_IOMMU
+	help
+	  Selecting this option will enable by default the scalable mode if
+	  hardware presents the capability. The scalable mode is defined in
+	  VT-d 3.0. The scalable mode capability could be checked by reading
+	  /sys/devices/virtual/iommu/dmar*/intel-iommu/ecap. If this option
+	  is not selected, scalable mode support could also be enabled by
+	  passing intel_iommu=sm_on to the kernel. If not sure, please use
+	  the default value.
diff --git a/drivers/iommu/intel/Makefile b/drivers/iommu/intel/Makefile
new file mode 100644
index 000000000000..fb8e1e8c8029
--- /dev/null
+++ b/drivers/iommu/intel/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_DMAR_TABLE) += dmar.o
+obj-$(CONFIG_INTEL_IOMMU) += iommu.o pasid.o
+obj-$(CONFIG_INTEL_IOMMU) += trace.o
+obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += debugfs.o
+obj-$(CONFIG_INTEL_IOMMU_SVM) += svm.o
+obj-$(CONFIG_IRQ_REMAP) += irq_remapping.o