iommu/arm-smmu-v3: Add IORT configuration

In ACPI bases systems, in order to be able to create platform
devices and initialize them for ARM SMMU v3 components, the IORT
kernel implementation requires a set of static functions to be
used by the IORT kernel layer to configure platform devices for
ARM SMMU v3 components.

Add static configuration functions to the IORT kernel layer for
the ARM SMMU v3 components, so that the ARM SMMU v3 driver can
initialize its respective platform device by relying on the IORT
kernel infrastructure and by adding a corresponding ACPI device
early probe section entry.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

1 files changed, 48 insertions, 1 deletions

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index d777d7e367bf..4d6ec444a9d6 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -20,6 +20,8 @@
  * This driver is powered by bad coffee and bombay mix.
  */
 
+#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
 #include <linux/delay.h>
 #include <linux/dma-iommu.h>
 #include <linux/err.h>
@@ -2559,6 +2561,32 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+				      struct arm_smmu_device *smmu)
+{
+	struct acpi_iort_smmu_v3 *iort_smmu;
+	struct device *dev = smmu->dev;
+	struct acpi_iort_node *node;
+
+	node = *(struct acpi_iort_node **)dev_get_platdata(dev);
+
+	/* Retrieve SMMUv3 specific data */
+	iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+	if (iort_smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE)
+		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
+
+	return 0;
+}
+#else
+static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+					     struct arm_smmu_device *smmu)
+{
+	return -ENODEV;
+}
+#endif
+
 static int arm_smmu_device_dt_probe(struct platform_device *pdev,
 				    struct arm_smmu_device *smmu)
 {
@@ -2624,8 +2652,16 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 	if (irq > 0)
 		smmu->gerr_irq = irq;
 
+	if (dev->of_node) {
+		ret = arm_smmu_device_dt_probe(pdev, smmu);
+	} else {
+		ret = arm_smmu_device_acpi_probe(pdev, smmu);
+		if (ret == -ENODEV)
+			return ret;
+	}
+
 	/* Set bypass mode according to firmware probing result */
-	bypass = !!arm_smmu_device_dt_probe(pdev, smmu);
+	bypass = !!ret;
 
 	/* Probe the h/w */
 	ret = arm_smmu_device_hw_probe(smmu);
@@ -2728,6 +2764,17 @@ static int __init arm_smmu_of_init(struct device_node *np)
 }
 IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init);
 
+#ifdef CONFIG_ACPI
+static int __init acpi_smmu_v3_init(struct acpi_table_header *table)
+{
+	if (iort_node_match(ACPI_IORT_NODE_SMMU_V3))
+		return arm_smmu_init();
+
+	return 0;
+}
+IORT_ACPI_DECLARE(arm_smmu_v3, ACPI_SIG_IORT, acpi_smmu_v3_init);
+#endif
+
 MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
 MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
 MODULE_LICENSE("GPL v2");