Merge tag 'iio-for-v4.2a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, functionality and cleanups for the 4.2 cycle

New drivers / device support
* st sensors driver, lsm303dlh magnetometer support.
* ltr501 - support ltr301 and ltr559 chips.

New functionality
* IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors.
* kxcjk1013 - make driver operational with external trigger.
* Add iio targets to the tools Makefile.

Cleanups
* st sensors - more helpful error message if device id wrong or irq request
  fails, explicitly make the Block Data Update optional rather
  than relying on writes to address 0 not doing anything, make interrupt
  support optional (Not always wired, and not all devices actually have
  an interrupt line.)
* kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI
  id as seen in the wild.
* sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power
  management, optimize power usage by powering down when possible, rename
  the gpio interrupt pin to be more useful, trivial return path simplification,
  trivial formatting fixes.
* isl29018 -  move towards ABI compliance with a view to moving this driver
  out of staging, add some brackets to ensure code works as expected.  Note
  there is no actual bug as the condition being tested is always true
  (with current devices).
* ltr501 - add regmap support to get caching etc for later patches,
  fix a parameter sanity check that always fails (bug introduced
  earlier in this series), ACPI enumeration support,
  interrupt rate control support, interrupt support in general and
  integration time control support, code alignment cleanups.
* mma9553 - a number of little cleanups following a review from Hartmut
  after I'd already applied the original driver patch.
* tmp006 - prefix some defines with TMP006 for consistency.
* tsl4531 - cleanup some wrong prefixes, presumably from copy and paste.
* mlx90614 - check for errors in read values, add power management,
  add emissivity setting, add device tree binding documentation,
  fix a duplicate const warning.
* ti_am335x_adc - refactor the DT parsing into a separate function.

3 files changed, 122 insertions, 0 deletions

diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h
index 7e81d00ef0c3..287691ca56c1 100644
--- a/drivers/iio/magnetometer/st_magn.h
+++ b/drivers/iio/magnetometer/st_magn.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/iio/common/st_sensors.h>
 
+#define LSM303DLH_MAGN_DEV_NAME		"lsm303dlh_magn"
 #define LSM303DLHC_MAGN_DEV_NAME	"lsm303dlhc_magn"
 #define LSM303DLM_MAGN_DEV_NAME		"lsm303dlm_magn"
 #define LIS3MDL_MAGN_DEV_NAME		"lis3mdl"
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 8ade473f99fe..73574d912e7c 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -45,6 +45,46 @@
 #define ST_MAGN_FS_AVL_12000MG			12000
 #define ST_MAGN_FS_AVL_16000MG			16000
 
+/* CUSTOM VALUES FOR SENSOR 0 */
+#define ST_MAGN_0_ODR_ADDR			0x00
+#define ST_MAGN_0_ODR_MASK			0x1c
+#define ST_MAGN_0_ODR_AVL_1HZ_VAL		0x00
+#define ST_MAGN_0_ODR_AVL_2HZ_VAL		0x01
+#define ST_MAGN_0_ODR_AVL_3HZ_VAL		0x02
+#define ST_MAGN_0_ODR_AVL_8HZ_VAL		0x03
+#define ST_MAGN_0_ODR_AVL_15HZ_VAL		0x04
+#define ST_MAGN_0_ODR_AVL_30HZ_VAL		0x05
+#define ST_MAGN_0_ODR_AVL_75HZ_VAL		0x06
+#define ST_MAGN_0_ODR_AVL_220HZ_VAL		0x07
+#define ST_MAGN_0_PW_ADDR			0x02
+#define ST_MAGN_0_PW_MASK			0x03
+#define ST_MAGN_0_PW_ON				0x00
+#define ST_MAGN_0_PW_OFF			0x03
+#define ST_MAGN_0_FS_ADDR			0x01
+#define ST_MAGN_0_FS_MASK			0xe0
+#define ST_MAGN_0_FS_AVL_1300_VAL		0x01
+#define ST_MAGN_0_FS_AVL_1900_VAL		0x02
+#define ST_MAGN_0_FS_AVL_2500_VAL		0x03
+#define ST_MAGN_0_FS_AVL_4000_VAL		0x04
+#define ST_MAGN_0_FS_AVL_4700_VAL		0x05
+#define ST_MAGN_0_FS_AVL_5600_VAL		0x06
+#define ST_MAGN_0_FS_AVL_8100_VAL		0x07
+#define ST_MAGN_0_FS_AVL_1300_GAIN_XY		1100
+#define ST_MAGN_0_FS_AVL_1900_GAIN_XY		855
+#define ST_MAGN_0_FS_AVL_2500_GAIN_XY		670
+#define ST_MAGN_0_FS_AVL_4000_GAIN_XY		450
+#define ST_MAGN_0_FS_AVL_4700_GAIN_XY		400
+#define ST_MAGN_0_FS_AVL_5600_GAIN_XY		330
+#define ST_MAGN_0_FS_AVL_8100_GAIN_XY		230
+#define ST_MAGN_0_FS_AVL_1300_GAIN_Z		980
+#define ST_MAGN_0_FS_AVL_1900_GAIN_Z		760
+#define ST_MAGN_0_FS_AVL_2500_GAIN_Z		600
+#define ST_MAGN_0_FS_AVL_4000_GAIN_Z		400
+#define ST_MAGN_0_FS_AVL_4700_GAIN_Z		355
+#define ST_MAGN_0_FS_AVL_5600_GAIN_Z		295
+#define ST_MAGN_0_FS_AVL_8100_GAIN_Z		205
+#define ST_MAGN_0_MULTIREAD_BIT			false
+
 /* CUSTOM VALUES FOR SENSOR 1 */
 #define ST_MAGN_1_WAI_EXP			0x3c
 #define ST_MAGN_1_ODR_ADDR			0x00
@@ -151,6 +191,82 @@ static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
 
 static const struct st_sensor_settings st_magn_sensors_settings[] = {
 	{
+		.wai = 0, /* This sensor has no valid WhoAmI report 0 */
+		.sensors_supported = {
+			[0] = LSM303DLH_MAGN_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
+		.odr = {
+			.addr = ST_MAGN_0_ODR_ADDR,
+			.mask = ST_MAGN_0_ODR_MASK,
+			.odr_avl = {
+				{ 1, ST_MAGN_0_ODR_AVL_1HZ_VAL, },
+				{ 2, ST_MAGN_0_ODR_AVL_2HZ_VAL, },
+				{ 3, ST_MAGN_0_ODR_AVL_3HZ_VAL, },
+				{ 8, ST_MAGN_0_ODR_AVL_8HZ_VAL, },
+				{ 15, ST_MAGN_0_ODR_AVL_15HZ_VAL, },
+				{ 30, ST_MAGN_0_ODR_AVL_30HZ_VAL, },
+				{ 75, ST_MAGN_0_ODR_AVL_75HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_MAGN_0_PW_ADDR,
+			.mask = ST_MAGN_0_PW_MASK,
+			.value_on = ST_MAGN_0_PW_ON,
+			.value_off = ST_MAGN_0_PW_OFF,
+		},
+		.fs = {
+			.addr = ST_MAGN_0_FS_ADDR,
+			.mask = ST_MAGN_0_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_MAGN_FS_AVL_1300MG,
+					.value = ST_MAGN_0_FS_AVL_1300_VAL,
+					.gain = ST_MAGN_0_FS_AVL_1300_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_1300_GAIN_Z,
+				},
+				[1] = {
+					.num = ST_MAGN_FS_AVL_1900MG,
+					.value = ST_MAGN_0_FS_AVL_1900_VAL,
+					.gain = ST_MAGN_0_FS_AVL_1900_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_1900_GAIN_Z,
+				},
+				[2] = {
+					.num = ST_MAGN_FS_AVL_2500MG,
+					.value = ST_MAGN_0_FS_AVL_2500_VAL,
+					.gain = ST_MAGN_0_FS_AVL_2500_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_2500_GAIN_Z,
+				},
+				[3] = {
+					.num = ST_MAGN_FS_AVL_4000MG,
+					.value = ST_MAGN_0_FS_AVL_4000_VAL,
+					.gain = ST_MAGN_0_FS_AVL_4000_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_4000_GAIN_Z,
+				},
+				[4] = {
+					.num = ST_MAGN_FS_AVL_4700MG,
+					.value = ST_MAGN_0_FS_AVL_4700_VAL,
+					.gain = ST_MAGN_0_FS_AVL_4700_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_4700_GAIN_Z,
+				},
+				[5] = {
+					.num = ST_MAGN_FS_AVL_5600MG,
+					.value = ST_MAGN_0_FS_AVL_5600_VAL,
+					.gain = ST_MAGN_0_FS_AVL_5600_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_5600_GAIN_Z,
+				},
+				[6] = {
+					.num = ST_MAGN_FS_AVL_8100MG,
+					.value = ST_MAGN_0_FS_AVL_8100_VAL,
+					.gain = ST_MAGN_0_FS_AVL_8100_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_8100_GAIN_Z,
+				},
+			},
+		},
+		.multi_read_bit = ST_MAGN_0_MULTIREAD_BIT,
+		.bootime = 2,
+	},
+	{
 		.wai = ST_MAGN_1_WAI_EXP,
 		.sensors_supported = {
 			[0] = LSM303DLHC_MAGN_DEV_NAME,
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index 92e5c15452a3..5311d8aea8cc 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -21,6 +21,10 @@
 #ifdef CONFIG_OF
 static const struct of_device_id st_magn_of_match[] = {
 	{
+		.compatible = "st,lsm303dlh-magn",
+		.data = LSM303DLH_MAGN_DEV_NAME,
+	},
+	{
 		.compatible = "st,lsm303dlhc-magn",
 		.data = LSM303DLHC_MAGN_DEV_NAME,
 	},
@@ -71,6 +75,7 @@ static int st_magn_i2c_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id st_magn_id_table[] = {
+	{ LSM303DLH_MAGN_DEV_NAME },
 	{ LSM303DLHC_MAGN_DEV_NAME },
 	{ LSM303DLM_MAGN_DEV_NAME },
 	{ LIS3MDL_MAGN_DEV_NAME },