Merge airlied/drm-next into drm-intel-next-queued

Chris requested this backmerge for a reconciliation on
drm_print.h between drm-misc-next and drm-intel-next-queued

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

9 files changed, 60 insertions, 39 deletions

diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile
index 6fa760e1bdd5..4bc30bb548e2 100644
--- a/drivers/iio/common/Makefile
+++ b/drivers/iio/common/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for the IIO common modules.
 # Common modules contains modules, which can be shared among multiple
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 38e8783e4b05..ed8063f2da99 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -185,7 +185,6 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 static const struct iio_info ec_sensors_info = {
 	.read_raw = &cros_ec_sensors_read,
 	.write_raw = &cros_ec_sensors_write,
-	.driver_module = THIS_MODULE,
 };
 
 static int cros_ec_sensors_probe(struct platform_device *pdev)
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 0e4b379ada45..cfb6588565ba 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -179,6 +179,10 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 	int ret;
 
 	atomic_set(&st->user_requested_state, state);
+
+	if (atomic_add_unless(&st->runtime_pm_enable, 1, 1))
+		pm_runtime_enable(&st->pdev->dev);
+
 	if (state)
 		ret = pm_runtime_get_sync(&st->pdev->dev);
 	else {
@@ -221,7 +225,8 @@ static void hid_sensor_set_power_work(struct work_struct *work)
 	if (attrb->latency_ms > 0)
 		hid_sensor_set_report_latency(attrb, attrb->latency_ms);
 
-	_hid_sensor_power_state(attrb, true);
+	if (atomic_read(&attrb->user_requested_state))
+		_hid_sensor_power_state(attrb, true);
 }
 
 static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
@@ -232,7 +237,9 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
 
 void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
 {
-	pm_runtime_disable(&attrb->pdev->dev);
+	if (atomic_read(&attrb->runtime_pm_enable))
+		pm_runtime_disable(&attrb->pdev->dev);
+
 	pm_runtime_set_suspended(&attrb->pdev->dev);
 	pm_runtime_put_noidle(&attrb->pdev->dev);
 
@@ -243,7 +250,6 @@ void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
 EXPORT_SYMBOL(hid_sensor_remove_trigger);
 
 static const struct iio_trigger_ops hid_sensor_trigger_ops = {
-	.owner = THIS_MODULE,
 	.set_trigger_state = &hid_sensor_data_rdy_trigger_set_state,
 };
 
@@ -283,7 +289,6 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 	INIT_WORK(&attrb->work, hid_sensor_set_power_work);
 
 	pm_suspend_ignore_children(&attrb->pdev->dev, true);
-	pm_runtime_enable(&attrb->pdev->dev);
 	/* Default to 3 seconds, but can be changed from sysfs */
 	pm_runtime_set_autosuspend_delay(&attrb->pdev->dev,
 					 3000);
diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
index ea7adb638d99..2ba2ff5e59c4 100644
--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -175,9 +175,9 @@ static void ssp_wdt_work_func(struct work_struct *work)
 	data->timeout_cnt = 0;
 }
 
-static void ssp_wdt_timer_func(unsigned long ptr)
+static void ssp_wdt_timer_func(struct timer_list *t)
 {
-	struct ssp_data *data = (struct ssp_data *)ptr;
+	struct ssp_data *data = from_timer(data, t, wdt_timer);
 
 	switch (data->fw_dl_state) {
 	case SSP_FW_DL_STATE_FAIL:
@@ -571,7 +571,7 @@ static int ssp_probe(struct spi_device *spi)
 	INIT_WORK(&data->work_wdt, ssp_wdt_work_func);
 	INIT_DELAYED_WORK(&data->work_refresh, ssp_refresh_task);
 
-	setup_timer(&data->wdt_timer, ssp_wdt_timer_func, (unsigned long)data);
+	timer_setup(&data->wdt_timer, ssp_wdt_timer_func, 0);
 
 	ret = request_threaded_irq(data->spi->irq, NULL,
 				   ssp_irq_thread_fn,
diff --git a/drivers/iio/common/ssp_sensors/ssp_iio_sensor.h b/drivers/iio/common/ssp_sensors/ssp_iio_sensor.h
index 541c6590d69c..4528ab55eb68 100644
--- a/drivers/iio/common/ssp_sensors/ssp_iio_sensor.h
+++ b/drivers/iio/common/ssp_sensors/ssp_iio_sensor.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __SSP_IIO_SENSOR_H__
 #define __SSP_IIO_SENSOR_H__
 
diff --git a/drivers/iio/common/st_sensors/Makefile b/drivers/iio/common/st_sensors/Makefile
index 9f3e24f3024b..f7fb3b79b64c 100644
--- a/drivers/iio/common/st_sensors/Makefile
+++ b/drivers/iio/common/st_sensors/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for the STMicroelectronics sensor common modules.
 #
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 02e833b14db0..57db19182e95 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -93,6 +93,9 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
 	struct st_sensor_odr_avl odr_out = {0, 0};
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
+	if (!sdata->sensor_settings->odr.addr)
+		return 0;
+
 	err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
 	if (err < 0)
 		goto st_sensors_match_odr_error;
@@ -221,11 +224,14 @@ EXPORT_SYMBOL(st_sensors_set_enable);
 int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
 {
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	int err = 0;
 
-	return st_sensors_write_data_with_mask(indio_dev,
+	if (sdata->sensor_settings->enable_axis.addr)
+		err = st_sensors_write_data_with_mask(indio_dev,
 				sdata->sensor_settings->enable_axis.addr,
 				sdata->sensor_settings->enable_axis.mask,
 				axis_enable);
+	return err;
 }
 EXPORT_SYMBOL(st_sensors_set_axis_enable);
 
@@ -283,7 +289,8 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	/* Sensor does not support interrupts */
-	if (sdata->sensor_settings->drdy_irq.addr == 0) {
+	if (!sdata->sensor_settings->drdy_irq.int1.addr &&
+	    !sdata->sensor_settings->drdy_irq.int2.addr) {
 		if (pdata->drdy_int_pin)
 			dev_info(&indio_dev->dev,
 				 "DRDY on pin INT%d specified, but sensor "
@@ -294,7 +301,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 
 	switch (pdata->drdy_int_pin) {
 	case 1:
-		if (sdata->sensor_settings->drdy_irq.mask_int1 == 0) {
+		if (!sdata->sensor_settings->drdy_irq.int1.mask) {
 			dev_err(&indio_dev->dev,
 					"DRDY on INT1 not available.\n");
 			return -EINVAL;
@@ -302,7 +309,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 		sdata->drdy_int_pin = 1;
 		break;
 	case 2:
-		if (sdata->sensor_settings->drdy_irq.mask_int2 == 0) {
+		if (!sdata->sensor_settings->drdy_irq.int2.mask) {
 			dev_err(&indio_dev->dev,
 					"DRDY on INT2 not available.\n");
 			return -EINVAL;
@@ -315,7 +322,8 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 	}
 
 	if (pdata->open_drain) {
-		if (!sdata->sensor_settings->drdy_irq.addr_od)
+		if (!sdata->sensor_settings->drdy_irq.int1.addr_od &&
+		    !sdata->sensor_settings->drdy_irq.int2.addr_od)
 			dev_err(&indio_dev->dev,
 				"open drain requested but unsupported.\n");
 		else
@@ -442,11 +450,21 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 	}
 
 	if (sdata->int_pin_open_drain) {
+		u8 addr, mask;
+
+		if (sdata->drdy_int_pin == 1) {
+			addr = sdata->sensor_settings->drdy_irq.int1.addr_od;
+			mask = sdata->sensor_settings->drdy_irq.int1.mask_od;
+		} else {
+			addr = sdata->sensor_settings->drdy_irq.int2.addr_od;
+			mask = sdata->sensor_settings->drdy_irq.int2.mask_od;
+		}
+
 		dev_info(&indio_dev->dev,
-			 "set interrupt line to open drain mode\n");
-		err = st_sensors_write_data_with_mask(indio_dev,
-				sdata->sensor_settings->drdy_irq.addr_od,
-				sdata->sensor_settings->drdy_irq.mask_od, 1);
+			 "set interrupt line to open drain mode on pin %d\n",
+			 sdata->drdy_int_pin);
+		err = st_sensors_write_data_with_mask(indio_dev, addr,
+						      mask, 1);
 		if (err < 0)
 			return err;
 	}
@@ -460,17 +478,18 @@ EXPORT_SYMBOL(st_sensors_init_sensor);
 int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
 {
 	int err;
-	u8 drdy_mask;
+	u8 drdy_addr, drdy_mask;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-	if (!sdata->sensor_settings->drdy_irq.addr) {
+	if (!sdata->sensor_settings->drdy_irq.int1.addr &&
+	    !sdata->sensor_settings->drdy_irq.int2.addr) {
 		/*
 		 * there are some devices (e.g. LIS3MDL) where drdy line is
 		 * routed to a given pin and it is not possible to select a
 		 * different one. Take into account irq status register
 		 * to understand if irq trigger can be properly supported
 		 */
-		if (sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+		if (sdata->sensor_settings->drdy_irq.stat_drdy.addr)
 			sdata->hw_irq_trigger = enable;
 		return 0;
 	}
@@ -485,18 +504,20 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
 			goto st_accel_set_dataready_irq_error;
 	}
 
-	if (sdata->drdy_int_pin == 1)
-		drdy_mask = sdata->sensor_settings->drdy_irq.mask_int1;
-	else
-		drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2;
+	if (sdata->drdy_int_pin == 1) {
+		drdy_addr = sdata->sensor_settings->drdy_irq.int1.addr;
+		drdy_mask = sdata->sensor_settings->drdy_irq.int1.mask;
+	} else {
+		drdy_addr = sdata->sensor_settings->drdy_irq.int2.addr;
+		drdy_mask = sdata->sensor_settings->drdy_irq.int2.mask;
+	}
 
 	/* Flag to the poll function that the hardware trigger is in use */
 	sdata->hw_irq_trigger = enable;
 
 	/* Enable/Disable the interrupt generator for data ready. */
-	err = st_sensors_write_data_with_mask(indio_dev,
-					sdata->sensor_settings->drdy_irq.addr,
-					drdy_mask, (int)enable);
+	err = st_sensors_write_data_with_mask(indio_dev, drdy_addr,
+					      drdy_mask, (int)enable);
 
 st_accel_set_dataready_irq_error:
 	return err;
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.h b/drivers/iio/common/st_sensors/st_sensors_core.h
index cd88098ff6f1..e8894be55660 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.h
+++ b/drivers/iio/common/st_sensors/st_sensors_core.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Local functions in the ST Sensors core
  */
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index fa73e6795359..fdcc5a891958 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -31,7 +31,7 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
 	int ret;
 
 	/* How would I know if I can't check it? */
-	if (!sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+	if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr)
 		return -EINVAL;
 
 	/* No scan mask, no interrupt */
@@ -39,23 +39,15 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
 		return 0;
 
 	ret = sdata->tf->read_byte(&sdata->tb, sdata->dev,
-			sdata->sensor_settings->drdy_irq.addr_stat_drdy,
+			sdata->sensor_settings->drdy_irq.stat_drdy.addr,
 			&status);
 	if (ret < 0) {
 		dev_err(sdata->dev,
 			"error checking samples available\n");
 		return ret;
 	}
-	/*
-	 * the lower bits of .active_scan_mask[0] is directly mapped
-	 * to the channels on the sensor: either bit 0 for
-	 * one-dimensional sensors, or e.g. x,y,z for accelerometers,
-	 * gyroscopes or magnetometers. No sensor use more than 3
-	 * channels, so cut the other status bits here.
-	 */
-	status &= 0x07;
 
-	if (status & (u8)indio_dev->active_scan_mask[0])
+	if (status & sdata->sensor_settings->drdy_irq.stat_drdy.mask)
 		return 1;
 
 	return 0;
@@ -212,7 +204,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	 * it was "our" interrupt.
 	 */
 	if (sdata->int_pin_open_drain &&
-	    sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+	    sdata->sensor_settings->drdy_irq.stat_drdy.addr)
 		irq_trig |= IRQF_SHARED;
 
 	err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),