Merge tag 'iio-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanups for the 4.13 cycle.

A few reverts here. One was a general failure to notice a device was already
supported by another driver.  The second is due to a review comment pointing
out that the original patch was a bad idea and would break existing systems.

Reverts
* bma180
  - Revert addition of support for the BMA250E it is already supported by
    the bmc150-accel and better supported at that. Oops.
* hi8435
  - The fix for cleanup of the reset gpio stuff isn't a good way to go.  It
    breaks systems where an inverting level convertor is used.  The right fix
    is to make the original devicetree correct - even if it involves patching
    the devicetree in kernel.

New Device Support
* stm32-adc
  - STM32H7 support and bindings.

Features
* core
  - add a hardware triggered operating mode for systems in which the actual
    trigger is never seen by the kernel.  This is typically only used when
    a device 'can' use other triggers, but if a particular magic one is
    enabled the interrupt is effectively handled in hardware and we never see
    it.
* st-lsm6dsx
  - support active low interrupts.
* stm32-adc
  - Make the core adc clock optional as not all hardware supported requires it.
  - Make the bus clock optional in the per instance driver as it may be shared
    by all instances of the ADC and is handled by the core.
  - Rework to have a data structure representing the device type specific
    elements.
* stm32-trigger (and counter)
  - Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
  - Add an attribute to configure device modes for quadrature counting etc.

Clean ups and minor fixes
* IIO core.
  - use __sysfs_match_string() helper rather than open coding the same.
* ad7791
  - use sysfs_match_string() helper rather than open coding the same.
* aspeed-adc
  - handle return value of clk_prepare_enable
* cpcap
  - Fix default register values and ensure the battery thermistor is enabled
    correctly.
  - Fix the reported die temperature where we can - docs are lacking.
  - Remove the hung interrupt quirk as no longer happens due to fix in the
    mfd driver.
* hi8435
  - Remove &s from hi8435_info definition as unneeded and inconsistent.
* hid-sensor-trgger
  - Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
* ina2xx
  - Make the use of iio_info_mask* elements consistent for all channels.
    This doesn't have any visible effect, but acts as clear documentation of
    which channels various resulting attributes apply to.
* lpc32xx
  - handle the return value of clk_prepare_enable.
* meson-saradc
  - NULL instead of 0 for pointer.
* mma9551
  - use NULL for GPIO connection ID to aid implementation fo ACPI support.
    Here the connection ID doesn't actually tell us anything and it is much
    easier to deal with the driver if it's not there.
* mpu6050
  - Fix lock issues through use of a local mux.
  - Replace sprintf with scnprintf as appropriate.
  - Check whoami against all known values.  This allows for a small number of
    boards where we are really fishing for the part not being present at all.
    It is unfortunately common to have undescribed changes to use newer chips.
    We paper over this but just emitting a warning for those cases as long as
    we know about.
* mxs-lradc
  - Fix some non static warnings.
* rcar-adc
  - Part of making the naming for this part consistent across the kernel.
* st_accel
  - drop some spi_device_id entries for variants with no SPI support
* st_magn
  - drop some spi_device_id entries for variants with no SPI support.
* sx9500
  - Use devm_gpiod_get instead of indexed value with an index of 0 on all
    occasions.
* twl4030
  - Drop unused twl4030_get_madc_conversion as callers removed now throughout
    kernel.
  - Unexport twl4030_madc_conversion() as no used only within this driver.
  - Drop twl4030_madc_user_params as not used now.
  - Drop twl4030_madc_request.func_cb as not used now.
  - Fold the twl4030-madc.h header into the driver as no longer used anywhere
    else in the kernel.
* xilinx
  - Handle the return value of clk_prepare_enable

1 files changed, 16 insertions, 16 deletions

diff --git a/drivers/iio/adc/mxs-lradc-adc.c b/drivers/iio/adc/mxs-lradc-adc.c
index 6888167ca1e6..d32b34638c2f 100644
--- a/drivers/iio/adc/mxs-lradc-adc.c
+++ b/drivers/iio/adc/mxs-lradc-adc.c
@@ -48,7 +48,7 @@
 
 #define VREF_MV_BASE 1850
 
-const char *mx23_lradc_adc_irq_names[] = {
+static const char *mx23_lradc_adc_irq_names[] = {
 	"mxs-lradc-channel0",
 	"mxs-lradc-channel1",
 	"mxs-lradc-channel2",
@@ -57,7 +57,7 @@ const char *mx23_lradc_adc_irq_names[] = {
 	"mxs-lradc-channel5",
 };
 
-const char *mx28_lradc_adc_irq_names[] = {
+static const char *mx28_lradc_adc_irq_names[] = {
 	"mxs-lradc-thresh0",
 	"mxs-lradc-thresh1",
 	"mxs-lradc-channel0",
@@ -344,20 +344,20 @@ static ssize_t mxs_lradc_adc_show_scale_avail(struct device *dev,
 	IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, 0444,\
 			mxs_lradc_adc_show_scale_avail, NULL, ch)
 
-SHOW_SCALE_AVAILABLE_ATTR(0);
-SHOW_SCALE_AVAILABLE_ATTR(1);
-SHOW_SCALE_AVAILABLE_ATTR(2);
-SHOW_SCALE_AVAILABLE_ATTR(3);
-SHOW_SCALE_AVAILABLE_ATTR(4);
-SHOW_SCALE_AVAILABLE_ATTR(5);
-SHOW_SCALE_AVAILABLE_ATTR(6);
-SHOW_SCALE_AVAILABLE_ATTR(7);
-SHOW_SCALE_AVAILABLE_ATTR(10);
-SHOW_SCALE_AVAILABLE_ATTR(11);
-SHOW_SCALE_AVAILABLE_ATTR(12);
-SHOW_SCALE_AVAILABLE_ATTR(13);
-SHOW_SCALE_AVAILABLE_ATTR(14);
-SHOW_SCALE_AVAILABLE_ATTR(15);
+static SHOW_SCALE_AVAILABLE_ATTR(0);
+static SHOW_SCALE_AVAILABLE_ATTR(1);
+static SHOW_SCALE_AVAILABLE_ATTR(2);
+static SHOW_SCALE_AVAILABLE_ATTR(3);
+static SHOW_SCALE_AVAILABLE_ATTR(4);
+static SHOW_SCALE_AVAILABLE_ATTR(5);
+static SHOW_SCALE_AVAILABLE_ATTR(6);
+static SHOW_SCALE_AVAILABLE_ATTR(7);
+static SHOW_SCALE_AVAILABLE_ATTR(10);
+static SHOW_SCALE_AVAILABLE_ATTR(11);
+static SHOW_SCALE_AVAILABLE_ATTR(12);
+static SHOW_SCALE_AVAILABLE_ATTR(13);
+static SHOW_SCALE_AVAILABLE_ATTR(14);
+static SHOW_SCALE_AVAILABLE_ATTR(15);
 
 static struct attribute *mxs_lradc_adc_attributes[] = {
 	&iio_dev_attr_in_voltage0_scale_available.dev_attr.attr,