Merge tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.4 cycle.

* adis16400
  - Make sure to free memory on a few failure paths.
* adxl372
  - Fix wrong fifo depth
  - Fix wrong indexing of data from the fifo.
  - Perform a reset at startup to avoid a problem with inconsistent state.
* axp288
  - This is a fix for a fix.  The original fix made sure we kept the
    configuration from some firmwares to preserve a bias current.
    Unfortunately it appears the previous behaviour was working around
    a buggy firmware by overwriting the wrong value it had.  Hence
    a regression was seen.
* bmc150
  - Fix the centre temperature.  This was due to an error in one of the
    datasheets.
* hx711
  - Fix an issue where a badly timed interrupt could lead to a control
    line being high long enough to put the device into a low power state.
* meson_sar_adc
  - Fix a case where the irq was enabled before everything it uses was
    allocated.
* st_lsm6dsx
  - Ensure we don't set the sensor sensitivity to 0 as it will force
    all readings to 0.
  - Fix a wait time for the slave i2c controller when the accelerometer
    is not enabled.
* stm32-adc
  - Precursor for fix. Move a set of register definitions to a header.
  - Fix a race when several ADCs are in use with some using interrupts
    to control the dataflow and some using DMA.
* vcnl4000
  - Fix a garbage of_match_table in which a string was passed instead
    of the intended enum.

* tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: Fix an undefied reference error in noa1305_probe
  iio: light: opt3001: fix mutex unlock race
  iio: adc: ad799x: fix probe error handling
  iio: light: add missing vcnl4040 of_compatible
  iio: light: fix vcnl4000 devicetree hooks
  iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller
  iio: adc: axp288: Override TS pin bias current for some models
  iio: imu: adis16400: fix memory leak
  iio: imu: adis16400: release allocated memory on failure
  iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
  iio: adc: stm32-adc: move registers definitions
  iio: accel: adxl372: Perform a reset at start up
  iio: accel: adxl372: Fix push to buffers lost samples
  iio: accel: adxl372: Fix/remove limitation for FIFO samples
  iio: adc: hx711: fix bug in sampling of data
  iio: fix center temperature of bmc150-accel-core
  iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity
  iio: adc: meson_saradc: Fix memory allocation order

1 files changed, 32 insertions, 0 deletions

diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index adc9cf7a075d..8ea2aed6d6f5 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -7,6 +7,7 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
+#include <linux/dmi.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -25,6 +26,11 @@
 #define AXP288_ADC_EN_MASK				0xF0
 #define AXP288_ADC_TS_ENABLE				0x01
 
+#define AXP288_ADC_TS_BIAS_MASK				GENMASK(5, 4)
+#define AXP288_ADC_TS_BIAS_20UA				(0 << 4)
+#define AXP288_ADC_TS_BIAS_40UA				(1 << 4)
+#define AXP288_ADC_TS_BIAS_60UA				(2 << 4)
+#define AXP288_ADC_TS_BIAS_80UA				(3 << 4)
 #define AXP288_ADC_TS_CURRENT_ON_OFF_MASK		GENMASK(1, 0)
 #define AXP288_ADC_TS_CURRENT_OFF			(0 << 0)
 #define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING		(1 << 0)
@@ -177,10 +183,36 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
+/*
+ * We rely on the machine's firmware to correctly setup the TS pin bias current
+ * at boot. This lists systems with broken fw where we need to set it ourselves.
+ */
+static const struct dmi_system_id axp288_adc_ts_bias_override[] = {
+	{
+		/* Lenovo Ideapad 100S (11 inch) */
+		.matches = {
+		  DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		  DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 100S-11IBY"),
+		},
+		.driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
+	},
+	{}
+};
+
 static int axp288_adc_initialize(struct axp288_adc_info *info)
 {
+	const struct dmi_system_id *bias_override;
 	int ret, adc_enable_val;
 
+	bias_override = dmi_first_match(axp288_adc_ts_bias_override);
+	if (bias_override) {
+		ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_BIAS_MASK,
+					 (uintptr_t)bias_override->driver_data);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * Determine if the TS pin is enabled and set the TS current-source
 	 * accordingly.