ide: remove the legacy ide driver

The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while.  Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 0 insertions, 184 deletions

diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c
deleted file mode 100644
index cf996f788292..000000000000
--- a/drivers/ide/umc8672.c
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 1995-1996  Linus Torvalds & author (see below)
- */
-
-/*
- *  Principal Author/Maintainer:  PODIEN@hml2.atlas.de (Wolfram Podien)
- *
- *  This file provides support for the advanced features
- *  of the UMC 8672 IDE interface.
- *
- *  Version 0.01	Initial version, hacked out of ide.c,
- *			and #include'd rather than compiled separately.
- *			This will get cleaned up in a subsequent release.
- *
- *  Version 0.02	now configs/compiles separate from ide.c  -ml
- *  Version 0.03	enhanced auto-tune, fix display bug
- *  Version 0.05	replace sti() with restore_flags()  -ml
- *			add detection of possible race condition  -ml
- */
-
-/*
- * VLB Controller Support from
- * Wolfram Podien
- * Rohoefe 3
- * D28832 Achim
- * Germany
- *
- * To enable UMC8672 support there must a lilo line like
- * append="ide0=umc8672"...
- * To set the speed according to the abilities of the hardware there must be a
- * line like
- * #define UMC_DRIVE0 11
- * in the beginning of the driver, which sets the speed of drive 0 to 11 (there
- * are some lines present). 0 - 11 are allowed speed values. These values are
- * the results from the DOS speed test program supplied from UMC. 11 is the
- * highest speed (about PIO mode 3)
- */
-#define REALLY_SLOW_IO		/* some systems can safely undef this */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "umc8672"
-
-/*
- * Default speeds.  These can be changed with "auto-tune" and/or hdparm.
- */
-#define UMC_DRIVE0      1              /* DOS measured drive speeds */
-#define UMC_DRIVE1      1              /* 0 to 11 allowed */
-#define UMC_DRIVE2      1              /* 11 = Fastest Speed */
-#define UMC_DRIVE3      1              /* In case of crash reduce speed */
-
-static u8 current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3};
-static const u8 pio_to_umc [5] = {0, 3, 7, 10, 11};	/* rough guesses */
-
-/*       0    1    2    3    4    5    6    7    8    9    10   11      */
-static const u8 speedtab [3][12] = {
-	{0x0f, 0x0b, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1},
-	{0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1},
-	{0xff, 0xcb, 0xc0, 0x58, 0x36, 0x33, 0x23, 0x22, 0x21, 0x11, 0x10, 0x0}
-};
-
-static void out_umc(char port, char wert)
-{
-	outb_p(port, 0x108);
-	outb_p(wert, 0x109);
-}
-
-static inline u8 in_umc(char port)
-{
-	outb_p(port, 0x108);
-	return inb_p(0x109);
-}
-
-static void umc_set_speeds(u8 speeds[])
-{
-	int i, tmp;
-
-	outb_p(0x5A, 0x108); /* enable umc */
-
-	out_umc(0xd7, (speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
-	out_umc(0xd6, (speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
-	tmp = 0;
-	for (i = 3; i >= 0; i--)
-		tmp = (tmp << 2) | speedtab[1][speeds[i]];
-	out_umc(0xdc, tmp);
-	for (i = 0; i < 4; i++) {
-		out_umc(0xd0 + i, speedtab[2][speeds[i]]);
-		out_umc(0xd8 + i, speedtab[2][speeds[i]]);
-	}
-	outb_p(0xa5, 0x108); /* disable umc */
-
-	printk("umc8672: drive speeds [0 to 11]: %d %d %d %d\n",
-		speeds[0], speeds[1], speeds[2], speeds[3]);
-}
-
-static void umc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	ide_hwif_t *mate = hwif->mate;
-	unsigned long flags;
-	const u8 pio = drive->pio_mode - XFER_PIO_0;
-
-	printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
-		drive->name, pio, pio_to_umc[pio]);
-	if (mate)
-		spin_lock_irqsave(&mate->lock, flags);
-	if (mate && mate->handler) {
-		printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n");
-	} else {
-		current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
-		umc_set_speeds(current_speeds);
-	}
-	if (mate)
-		spin_unlock_irqrestore(&mate->lock, flags);
-}
-
-static const struct ide_port_ops umc8672_port_ops = {
-	.set_pio_mode		= umc_set_pio_mode,
-};
-
-static const struct ide_port_info umc8672_port_info __initconst = {
-	.name			= DRV_NAME,
-	.chipset		= ide_umc8672,
-	.port_ops		= &umc8672_port_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-	.pio_mask		= ATA_PIO4,
-};
-
-static int __init umc8672_probe(void)
-{
-	unsigned long flags;
-
-	if (!request_region(0x108, 2, "umc8672")) {
-		printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n");
-		return 1;
-	}
-	local_irq_save(flags);
-	outb_p(0x5A, 0x108); /* enable umc */
-	if (in_umc (0xd5) != 0xa0) {
-		local_irq_restore(flags);
-		printk(KERN_ERR "umc8672: not found\n");
-		release_region(0x108, 2);
-		return 1;
-	}
-	outb_p(0xa5, 0x108); /* disable umc */
-
-	umc_set_speeds(current_speeds);
-	local_irq_restore(flags);
-
-	return ide_legacy_device_add(&umc8672_port_info, 0);
-}
-
-static bool probe_umc8672;
-
-module_param_named(probe, probe_umc8672, bool, 0);
-MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");
-
-static int __init umc8672_init(void)
-{
-	if (probe_umc8672 == 0)
-		goto out;
-
-	if (umc8672_probe() == 0)
-		return 0;
-out:
-	return -ENODEV;
-}
-
-module_init(umc8672_init);
-
-MODULE_AUTHOR("Wolfram Podien");
-MODULE_DESCRIPTION("Support for UMC 8672 IDE chipset");
-MODULE_LICENSE("GPL");