ide: remove the legacy ide driver

The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while.  Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 0 insertions, 143 deletions

diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
deleted file mode 100644
index 16ddd0956832..000000000000
--- a/drivers/ide/triflex.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * IDE Chipset driver for the Compaq TriFlex IDE controller.
- * 
- * Known to work with the Compaq Workstation 5x00 series.
- *
- * Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
- * Author: Torben Mathiasen <torben.mathiasen@hp.com>
- * 
- * Loosely based on the piix & svwks drivers.
- *
- * Documentation:
- *	Not publicly available.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "triflex"
-
-static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	u32 triflex_timings = 0;
-	u16 timing = 0;
-	u8 channel_offset = hwif->channel ? 0x74 : 0x70, unit = drive->dn & 1;
-
-	pci_read_config_dword(dev, channel_offset, &triflex_timings);
-
-	switch (drive->dma_mode) {
-		case XFER_MW_DMA_2:
-			timing = 0x0103; 
-			break;
-		case XFER_MW_DMA_1:
-			timing = 0x0203;
-			break;
-		case XFER_MW_DMA_0:
-			timing = 0x0808;
-			break;
-		case XFER_SW_DMA_2:
-		case XFER_SW_DMA_1:
-		case XFER_SW_DMA_0:
-			timing = 0x0f0f;
-			break;
-		case XFER_PIO_4:
-			timing = 0x0202;
-			break;
-		case XFER_PIO_3:
-			timing = 0x0204;
-			break;
-		case XFER_PIO_2:
-			timing = 0x0404;
-			break;
-		case XFER_PIO_1:
-			timing = 0x0508;
-			break;
-		case XFER_PIO_0:
-			timing = 0x0808;
-			break;
-	}
-
-	triflex_timings &= ~(0xFFFF << (16 * unit));
-	triflex_timings |= (timing << (16 * unit));
-	
-	pci_write_config_dword(dev, channel_offset, triflex_timings);
-}
-
-static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	drive->dma_mode = drive->pio_mode;
-	triflex_set_mode(hwif, drive);
-}
-
-static const struct ide_port_ops triflex_port_ops = {
-	.set_pio_mode		= triflex_set_pio_mode,
-	.set_dma_mode		= triflex_set_mode,
-};
-
-static const struct ide_port_info triflex_device = {
-	.name		= DRV_NAME,
-	.enablebits	= {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
-	.port_ops	= &triflex_port_ops,
-	.pio_mask	= ATA_PIO4,
-	.swdma_mask	= ATA_SWDMA2,
-	.mwdma_mask	= ATA_MWDMA2,
-};
-
-static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	return ide_pci_init_one(dev, &triflex_device, NULL);
-}
-
-static const struct pci_device_id triflex_pci_tbl[] = {
-	{ PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
-
-#ifdef CONFIG_PM
-static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
-{
-	/*
-	 * We must not disable or powerdown the device.
-	 * APM bios refuses to suspend if IDE is not accessible.
-	 */
-	pci_save_state(dev);
-	return 0;
-}
-#else
-#define triflex_ide_pci_suspend NULL
-#endif
-
-static struct pci_driver triflex_pci_driver = {
-	.name		= "TRIFLEX_IDE",
-	.id_table	= triflex_pci_tbl,
-	.probe		= triflex_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= triflex_ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init triflex_ide_init(void)
-{
-	return ide_pci_register_driver(&triflex_pci_driver);
-}
-
-static void __exit triflex_ide_exit(void)
-{
-	pci_unregister_driver(&triflex_pci_driver);
-}
-
-module_init(triflex_ide_init);
-module_exit(triflex_ide_exit);
-
-MODULE_AUTHOR("Torben Mathiasen");
-MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE");
-MODULE_LICENSE("GPL");
-
-