Pull release into acpica branch

10 files changed, 324 insertions, 1212 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4010fe92e72b..08d5b8fed2dc 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -236,27 +236,17 @@ config I2C_IXP2000
 	  This support is also available as a module. If so, the module
 	  will be called i2c-ixp2000.
 
-config I2C_KEYWEST
-	tristate "Powermac Keywest I2C interface"
+config I2C_POWERMAC
+	tristate "Powermac I2C interface"
 	depends on I2C && PPC_PMAC
+	default y
 	help
-	  This supports the use of the I2C interface in the combo-I/O
-	  chip on recent Apple machines.  Say Y if you have such a machine.
-
-	  This support is also available as a module.  If so, the module 
-	  will be called i2c-keywest.
-
-config I2C_PMAC_SMU
-	tristate "Powermac SMU I2C interface"
-	depends on I2C && PMAC_SMU
-	help
-	  This supports the use of the I2C interface in the SMU
-	  chip on recent Apple machines like the iMac G5.  It is used
-	  among others by the thermal control driver for those machines.
-	  Say Y if you have such a machine.
+	  This exposes the various PowerMac i2c interfaces to the linux i2c
+	  layer and to userland. It is used by various drivers on the powemac
+	  platform, thus should generally be enabled.
 
 	  This support is also available as a module.  If so, the module
-	  will be called i2c-pmac-smu.
+	  will be called i2c-powermac.
 
 config I2C_MPC
 	tristate "MPC107/824x/85xx/52xx"
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index f1df00f66c6c..b44831dff683 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -19,8 +19,7 @@ obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
 obj-$(CONFIG_I2C_ITE)		+= i2c-ite.o
 obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
 obj-$(CONFIG_I2C_IXP4XX)	+= i2c-ixp4xx.o
-obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
-obj-$(CONFIG_I2C_PMAC_SMU)	+= i2c-pmac-smu.o
+obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
deleted file mode 100644
index d61f748278fc..000000000000
--- a/drivers/i2c/busses/i2c-keywest.c
+++ /dev/null
@@ -1,751 +0,0 @@
-/*
-    i2c Support for Apple Keywest I2C Bus Controller
-
-    Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
-    Original work by
-    
-    Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-    Changes:
-
-    2001/12/13 BenH	New implementation
-    2001/12/15 BenH	Add support for "byte" and "quick"
-                        transfers. Add i2c_xfer routine.
-    2003/09/21 BenH	Rework state machine with Paulus help
-    2004/01/21 BenH	Merge in Greg KH changes, polled mode is back
-    2004/02/05 BenH	Merge 64 bits fixes from the g5 ppc64 tree
-
-    My understanding of the various modes supported by keywest are:
-
-     - Dumb mode : not implemented, probably direct tweaking of lines
-     - Standard mode : simple i2c transaction of type
-         S Addr R/W A Data A Data ... T
-     - Standard sub mode : combined 8 bit subaddr write with data read
-         S Addr R/W A SubAddr A Data A Data ... T
-     - Combined mode : Subaddress and Data sequences appended with no stop
-         S Addr R/W A SubAddr S Addr R/W A Data A Data ... T
-
-    Currently, this driver uses only Standard mode for i2c xfer, and
-    smbus byte & quick transfers ; and uses StandardSub mode for
-    other smbus transfers instead of combined as we need that for the
-    sound driver to be happy
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/pmac_low_i2c.h>
-
-#include "i2c-keywest.h"
-
-#undef POLLED_MODE
-
-/* Some debug macros */
-#define WRONG_STATE(name) do {\
-		pr_debug("KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
-			 name, __kw_state_names[iface->state], isr);	\
-	} while(0)
-
-#ifdef DEBUG
-static const char *__kw_state_names[] = {
-	"state_idle",
-	"state_addr",
-	"state_read",
-	"state_write",
-	"state_stop",
-	"state_dead"
-};
-#endif /* DEBUG */
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
-MODULE_LICENSE("GPL");
-
-#ifdef POLLED_MODE
-/* Don't schedule, the g5 fan controller is too
- * timing sensitive
- */
-static u8
-wait_interrupt(struct keywest_iface* iface)
-{
-	int i;
-	u8 isr;
-	
-	for (i = 0; i < 200000; i++) {
-		isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
-		if (isr != 0)
-			return isr;
-		udelay(10);
-	}
-	return isr;
-}
-#endif /* POLLED_MODE */
-
-static void
-do_stop(struct keywest_iface* iface, int result)
-{
-	write_reg(reg_control, KW_I2C_CTL_STOP);
-	iface->state = state_stop;
-	iface->result = result;
-}
-
-/* Main state machine for standard & standard sub mode */
-static void
-handle_interrupt(struct keywest_iface *iface, u8 isr)
-{
-	int ack;
-	
-	if (isr == 0) {
-		if (iface->state != state_stop) {
-			pr_debug("KW: Timeout !\n");
-			do_stop(iface, -EIO);
-		}
-		if (iface->state == state_stop) {
-			ack = read_reg(reg_status);
-			if (!(ack & KW_I2C_STAT_BUSY)) {
-				iface->state = state_idle;
-				write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
-				complete(&iface->complete);
-#endif /* POLLED_MODE */
-			}
-		}
-		return;
-	}
-
-	if (isr & KW_I2C_IRQ_ADDR) {
-		ack = read_reg(reg_status);
-		if (iface->state != state_addr) {
-			write_reg(reg_isr, KW_I2C_IRQ_ADDR);
-			WRONG_STATE("KW_I2C_IRQ_ADDR"); 
-			do_stop(iface, -EIO);
-			return;
-		}
-		if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
-			iface->state = state_stop;		     
-			iface->result = -ENODEV;
-			pr_debug("KW: NAK on address\n");
-		} else {
-			/* Handle rw "quick" mode */
-			if (iface->datalen == 0) {
-				do_stop(iface, 0);
-			} else if (iface->read_write == I2C_SMBUS_READ) {
-				iface->state = state_read;
-				if (iface->datalen > 1)
-					write_reg(reg_control, KW_I2C_CTL_AAK);
-			} else {
-				iface->state = state_write;
-				write_reg(reg_data, *(iface->data++));
-				iface->datalen--;
-			}
-		}
-		write_reg(reg_isr, KW_I2C_IRQ_ADDR);
-	}
-
-	if (isr & KW_I2C_IRQ_DATA) {
-		if (iface->state == state_read) {
-			*(iface->data++) = read_reg(reg_data);
-			write_reg(reg_isr, KW_I2C_IRQ_DATA);
-			iface->datalen--;
-			if (iface->datalen == 0)
-				iface->state = state_stop;
-			else if (iface->datalen == 1)
-				write_reg(reg_control, 0);
-		} else if (iface->state == state_write) {
-			/* Check ack status */
-			ack = read_reg(reg_status);
-			if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
-				pr_debug("KW: nack on data write (%x): %x\n",
-				    iface->data[-1], ack);
-				do_stop(iface, -EIO);
-			} else if (iface->datalen) {
-				write_reg(reg_data, *(iface->data++));
-				iface->datalen--;
-			} else {
-				write_reg(reg_control, KW_I2C_CTL_STOP);
-				iface->state = state_stop;
-				iface->result = 0;
-			}
-			write_reg(reg_isr, KW_I2C_IRQ_DATA);
-		} else {
-			write_reg(reg_isr, KW_I2C_IRQ_DATA);
-			WRONG_STATE("KW_I2C_IRQ_DATA"); 
-			if (iface->state != state_stop)
-				do_stop(iface, -EIO);
-		}
-	}
-
-	if (isr & KW_I2C_IRQ_STOP) {
-		write_reg(reg_isr, KW_I2C_IRQ_STOP);
-		if (iface->state != state_stop) {
-			WRONG_STATE("KW_I2C_IRQ_STOP");
-			iface->result = -EIO;
-		}
-		iface->state = state_idle;
-		write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
-		complete(&iface->complete);
-#endif /* POLLED_MODE */			
-	}
-
-	if (isr & KW_I2C_IRQ_START)
-		write_reg(reg_isr, KW_I2C_IRQ_START);
-}
-
-#ifndef POLLED_MODE
-
-/* Interrupt handler */
-static irqreturn_t
-keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
-	struct keywest_iface *iface = (struct keywest_iface *)dev_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&iface->lock, flags);
-	del_timer(&iface->timeout_timer);
-	handle_interrupt(iface, read_reg(reg_isr));
-	if (iface->state != state_idle) {
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
-	}
-	spin_unlock_irqrestore(&iface->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void
-keywest_timeout(unsigned long data)
-{
-	struct keywest_iface *iface = (struct keywest_iface *)data;
-	unsigned long flags;
-
-	pr_debug("timeout !\n");
-	spin_lock_irqsave(&iface->lock, flags);
-	handle_interrupt(iface, read_reg(reg_isr));
-	if (iface->state != state_idle) {
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
-	}
-	spin_unlock_irqrestore(&iface->lock, flags);
-}
-
-#endif /* POLLED_MODE */
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32
-keywest_smbus_xfer(	struct i2c_adapter*	adap,
-			u16			addr,
-			unsigned short		flags,
-			char			read_write,
-			u8			command,
-			int			size,
-			union i2c_smbus_data*	data)
-{
-	struct keywest_chan* chan = i2c_get_adapdata(adap);
-	struct keywest_iface* iface = chan->iface;
-	int len;
-	u8* buffer;
-	u16 cur_word;
-	int rc = 0;
-
-	if (iface->state == state_dead)
-		return -ENXIO;
-		
-	/* Prepare datas & select mode */
-	iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
-	switch (size) {
-        case I2C_SMBUS_QUICK:
-	    	len = 0;
-	    	buffer = NULL;
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARD;
-	    	break;
-        case I2C_SMBUS_BYTE:
-	    	len = 1;
-	    	buffer = &data->byte;
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARD;
-	    	break;
-        case I2C_SMBUS_BYTE_DATA:
-	    	len = 1;
-	    	buffer = &data->byte;
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
-	    	break;
-        case I2C_SMBUS_WORD_DATA:
-	    	len = 2;
-	    	cur_word = cpu_to_le16(data->word);
-	    	buffer = (u8 *)&cur_word;
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
-		break;
-        case I2C_SMBUS_BLOCK_DATA:
-	    	len = data->block[0];
-	    	buffer = &data->block[1];
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
-		break;
-        default:
-	    	return -1;
-	}
-
-	/* Turn a standardsub read into a combined mode access */
- 	if (read_write == I2C_SMBUS_READ
- 	    && (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB) {
- 		iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- 		iface->cur_mode |= KW_I2C_MODE_COMBINED;
- 	}
-
-	/* Original driver had this limitation */
-	if (len > 32)
-		len = 32;
-
-	if (pmac_low_i2c_lock(iface->node))
-		return -ENXIO;
-
-	pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
-		chan->chan_no, addr, len, read_write == I2C_SMBUS_READ);
-
-	iface->data = buffer;
-	iface->datalen = len;
-	iface->state = state_addr;
-	iface->result = 0;
-	iface->read_write = read_write;
-	
-	/* Setup channel & clear pending irqs */
-	write_reg(reg_isr, read_reg(reg_isr));
-	write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
-	write_reg(reg_status, 0);
-
-	/* Set up address and r/w bit */
-	write_reg(reg_addr,
-		(addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
-	/* Set up the sub address */
-	if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
-	    || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
-		write_reg(reg_subaddr, command);
-
-#ifndef POLLED_MODE
-	/* Arm timeout */
-	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-	add_timer(&iface->timeout_timer);
-#endif
-
-	/* Start sending address & enable interrupt*/
-	write_reg(reg_control, KW_I2C_CTL_XADDR);
-	write_reg(reg_ier, KW_I2C_IRQ_MASK);
-
-#ifdef POLLED_MODE
-	pr_debug("using polled mode...\n");
-	/* State machine, to turn into an interrupt handler */
-	while(iface->state != state_idle) {
-		unsigned long flags;
-
-		u8 isr = wait_interrupt(iface);
-		spin_lock_irqsave(&iface->lock, flags);
-		handle_interrupt(iface, isr);
-		spin_unlock_irqrestore(&iface->lock, flags);
-	}
-#else /* POLLED_MODE */
-	pr_debug("using interrupt mode...\n");
-	wait_for_completion(&iface->complete);	
-#endif /* POLLED_MODE */	
-
-	rc = iface->result;	
-	pr_debug("transfer done, result: %d\n", rc);
-
-	if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ)
-	    	data->word = le16_to_cpu(cur_word);
-	
-	/* Release sem */
-	pmac_low_i2c_unlock(iface->node);
-	
-	return rc;
-}
-
-/*
- * Generic i2c master transfer entrypoint
- */
-static int
-keywest_xfer(	struct i2c_adapter *adap,
-		struct i2c_msg *msgs, 
-		int num)
-{
-	struct keywest_chan* chan = i2c_get_adapdata(adap);
-	struct keywest_iface* iface = chan->iface;
-	struct i2c_msg *pmsg;
-	int i, completed;
-	int rc = 0;
-
-	if (iface->state == state_dead)
-		return -ENXIO;
-
-	if (pmac_low_i2c_lock(iface->node))
-		return -ENXIO;
-
-	/* Set adapter to standard mode */
-	iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
-	iface->cur_mode |= KW_I2C_MODE_STANDARD;
-
-	completed = 0;
-	for (i = 0; rc >= 0 && i < num;) {
-		u8 addr;
-		
-		pmsg = &msgs[i++];
-		addr = pmsg->addr;
-		if (pmsg->flags & I2C_M_TEN) {
-			printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n");
-			rc = -EINVAL;
-			break;
-		}
-		pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
-		     chan->chan_no,
-		     pmsg->flags & I2C_M_RD ? "read" : "write",
-                     pmsg->len, addr, i, num);
-    
-		/* Setup channel & clear pending irqs */
-		write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
-		write_reg(reg_isr, read_reg(reg_isr));
-		write_reg(reg_status, 0);
-		
-		iface->data = pmsg->buf;
-		iface->datalen = pmsg->len;
-		iface->state = state_addr;
-		iface->result = 0;
-		if (pmsg->flags & I2C_M_RD)
-			iface->read_write = I2C_SMBUS_READ;
-		else
-			iface->read_write = I2C_SMBUS_WRITE;
-
-		/* Set up address and r/w bit */
-		if (pmsg->flags & I2C_M_REV_DIR_ADDR)
-			addr ^= 1;		
-		write_reg(reg_addr,
-			(addr << 1) |
-			((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
-#ifndef POLLED_MODE
-		/* Arm timeout */
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
-#endif
-
-		/* Start sending address & enable interrupt*/
-		write_reg(reg_ier, KW_I2C_IRQ_MASK);
-		write_reg(reg_control, KW_I2C_CTL_XADDR);
-
-#ifdef POLLED_MODE
-		pr_debug("using polled mode...\n");
-		/* State machine, to turn into an interrupt handler */
-		while(iface->state != state_idle) {
-			u8 isr = wait_interrupt(iface);
-			handle_interrupt(iface, isr);
-		}
-#else /* POLLED_MODE */
-		pr_debug("using interrupt mode...\n");
-		wait_for_completion(&iface->complete);	
-#endif /* POLLED_MODE */	
-
-		rc = iface->result;
-		if (rc == 0)
-			completed++;
-		pr_debug("transfer done, result: %d\n", rc);
-	}
-
-	/* Release sem */
-	pmac_low_i2c_unlock(iface->node);
-
-	return completed;
-}
-
-static u32
-keywest_func(struct i2c_adapter * adapter)
-{
-	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm keywest_algorithm = {
-	.smbus_xfer	= keywest_smbus_xfer,
-	.master_xfer	= keywest_xfer,
-	.functionality	= keywest_func,
-};
-
-
-static int
-create_iface(struct device_node *np, struct device *dev)
-{
-	unsigned long steps;
-	unsigned bsteps, tsize, i, nchan, addroffset;
-	struct keywest_iface* iface;
-	u32 *psteps, *prate;
-	int rc;
-
-	if (np->n_intrs < 1 || np->n_addrs < 1) {
-		printk(KERN_ERR "%s: Missing interrupt or address !\n",
-		       np->full_name);
-		return -ENODEV;
-	}
-	if (pmac_low_i2c_lock(np))
-		return -ENODEV;
-
-	psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
-	steps = psteps ? (*psteps) : 0x10;
-
-	/* Hrm... maybe we can be smarter here */
-	for (bsteps = 0; (steps & 0x01) == 0; bsteps++)
-		steps >>= 1;
-
-	if (np->parent->name[0] == 'u') {
-		nchan = 2;
-		addroffset = 3;
-	} else {
-		addroffset = 0;
-		nchan = 1;
-	}
-
-	tsize = sizeof(struct keywest_iface) +
-		(sizeof(struct keywest_chan) + 4) * nchan;
-	iface = kzalloc(tsize, GFP_KERNEL);
-	if (iface == NULL) {
-		printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
-		pmac_low_i2c_unlock(np);
-		return -ENOMEM;
-	}
-	spin_lock_init(&iface->lock);
-	init_completion(&iface->complete);
-	iface->node = of_node_get(np);
-	iface->bsteps = bsteps;
-	iface->chan_count = nchan;
-	iface->state = state_idle;
-	iface->irq = np->intrs[0].line;
-	iface->channels = (struct keywest_chan *)
-		(((unsigned long)(iface + 1) + 3UL) & ~3UL);
-	iface->base = ioremap(np->addrs[0].address + addroffset,
-						np->addrs[0].size);
-	if (!iface->base) {
-		printk(KERN_ERR "i2c-keywest: can't map inteface !\n");
-		kfree(iface);
-		pmac_low_i2c_unlock(np);
-		return -ENOMEM;
-	}
-
-#ifndef POLLED_MODE
-	init_timer(&iface->timeout_timer);
-	iface->timeout_timer.function = keywest_timeout;
-	iface->timeout_timer.data = (unsigned long)iface;
-#endif
-
-	/* Select interface rate */
-	iface->cur_mode = KW_I2C_MODE_100KHZ;
-	prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
-	if (prate) switch(*prate) {
-	case 100:
-		iface->cur_mode = KW_I2C_MODE_100KHZ;
-		break;
-	case 50:
-		iface->cur_mode = KW_I2C_MODE_50KHZ;
-		break;
-	case 25:
-		iface->cur_mode = KW_I2C_MODE_25KHZ;
-		break;
-	default:
-		printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n",
-		       (long)*prate);
-	}
-	
-	/* Select standard mode by default */
-	iface->cur_mode |= KW_I2C_MODE_STANDARD;
-	
-	/* Write mode */
-	write_reg(reg_mode, iface->cur_mode);
-	
-	/* Switch interrupts off & clear them*/
-	write_reg(reg_ier, 0x00);
-	write_reg(reg_isr, KW_I2C_IRQ_MASK);
-
-#ifndef POLLED_MODE
-	/* Request chip interrupt */	
-	rc = request_irq(iface->irq, keywest_irq, SA_INTERRUPT, "keywest i2c", iface);
-	if (rc) {
-		printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq);
-		iounmap(iface->base);
-		kfree(iface);
-		pmac_low_i2c_unlock(np);
-		return -ENODEV;
-	}
-#endif /* POLLED_MODE */
-
-	pmac_low_i2c_unlock(np);
-	dev_set_drvdata(dev, iface);
-	
-	for (i=0; i<nchan; i++) {
-		struct keywest_chan* chan = &iface->channels[i];
-		
-		sprintf(chan->adapter.name, "%s %d", np->parent->name, i);
-		chan->iface = iface;
-		chan->chan_no = i;
-		chan->adapter.algo = &keywest_algorithm;
-		chan->adapter.algo_data = NULL;
-		chan->adapter.client_register = NULL;
-		chan->adapter.client_unregister = NULL;
-		i2c_set_adapdata(&chan->adapter, chan);
-		chan->adapter.dev.parent = dev;
-
-		rc = i2c_add_adapter(&chan->adapter);
-		if (rc) {
-			printk("i2c-keywest.c: Adapter %s registration failed\n",
-				chan->adapter.name);
-			i2c_set_adapdata(&chan->adapter, NULL);
-		}
-	}
-
-	printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n",
-		np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps);
-		
-	return 0;
-}
-
-static int
-dispose_iface(struct device *dev)
-{
-	struct keywest_iface *iface = dev_get_drvdata(dev);
-	int i, rc;
-	
-	/* Make sure we stop all activity */
-	if (pmac_low_i2c_lock(iface->node))
-		return -ENODEV;
-
-#ifndef POLLED_MODE
-	spin_lock_irq(&iface->lock);
-	while (iface->state != state_idle) {
-		spin_unlock_irq(&iface->lock);
-		msleep(100);
-		spin_lock_irq(&iface->lock);
-	}
-#endif /* POLLED_MODE */
-	iface->state = state_dead;
-#ifndef POLLED_MODE
-	spin_unlock_irq(&iface->lock);
-	free_irq(iface->irq, iface);
-#endif /* POLLED_MODE */
-
-	pmac_low_i2c_unlock(iface->node);
-
-	/* Release all channels */
-	for (i=0; i<iface->chan_count; i++) {
-		struct keywest_chan* chan = &iface->channels[i];
-		if (i2c_get_adapdata(&chan->adapter) == NULL)
-			continue;
-		rc = i2c_del_adapter(&chan->adapter);
-		i2c_set_adapdata(&chan->adapter, NULL);
-		/* We aren't that prepared to deal with this... */
-		if (rc)
-			printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n");
-	}
-	iounmap(iface->base);
-	dev_set_drvdata(dev, NULL);
-	of_node_put(iface->node);
-	kfree(iface);
-
-	return 0;
-}
-
-static int
-create_iface_macio(struct macio_dev* dev, const struct of_device_id *match)
-{
-	return create_iface(dev->ofdev.node, &dev->ofdev.dev);
-}
-
-static int
-dispose_iface_macio(struct macio_dev* dev)
-{
-	return dispose_iface(&dev->ofdev.dev);
-}
-
-static int
-create_iface_of_platform(struct of_device* dev, const struct of_device_id *match)
-{
-	return create_iface(dev->node, &dev->dev);
-}
-
-static int
-dispose_iface_of_platform(struct of_device* dev)
-{
-	return dispose_iface(&dev->dev);
-}
-
-static struct of_device_id i2c_keywest_match[] = 
-{
-	{
-	.type		= "i2c",
-	.compatible	= "keywest"
-	},
-	{},
-};
-
-static struct macio_driver i2c_keywest_macio_driver = 
-{
-	.owner		= THIS_MODULE,
-	.name 		= "i2c-keywest",
-	.match_table	= i2c_keywest_match,
-	.probe		= create_iface_macio,
-	.remove		= dispose_iface_macio
-};
-
-static struct of_platform_driver i2c_keywest_of_platform_driver = 
-{
-	.owner		= THIS_MODULE,
-	.name 		= "i2c-keywest",
-	.match_table	= i2c_keywest_match,
-	.probe		= create_iface_of_platform,
-	.remove		= dispose_iface_of_platform
-};
-
-static int __init
-i2c_keywest_init(void)
-{
-	of_register_driver(&i2c_keywest_of_platform_driver);
-	macio_register_driver(&i2c_keywest_macio_driver);
-
-	return 0;
-}
-
-static void __exit
-i2c_keywest_cleanup(void)
-{
-	of_unregister_driver(&i2c_keywest_of_platform_driver);
-	macio_unregister_driver(&i2c_keywest_macio_driver);
-}
-
-module_init(i2c_keywest_init);
-module_exit(i2c_keywest_cleanup);
diff --git a/drivers/i2c/busses/i2c-keywest.h b/drivers/i2c/busses/i2c-keywest.h
deleted file mode 100644
index c5022e1ca6ff..000000000000
--- a/drivers/i2c/busses/i2c-keywest.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __I2C_KEYWEST_H__
-#define __I2C_KEYWEST_H__
-
-/* The Tumbler audio equalizer can be really slow sometimes */
-#define POLL_TIMEOUT		(2*HZ)
-
-/* Register indices */
-typedef enum {
-	reg_mode = 0,
-	reg_control,
-	reg_status,
-	reg_isr,
-	reg_ier,
-	reg_addr,
-	reg_subaddr,
-	reg_data
-} reg_t;
-
-
-/* Mode register */
-#define KW_I2C_MODE_100KHZ	0x00
-#define KW_I2C_MODE_50KHZ	0x01
-#define KW_I2C_MODE_25KHZ	0x02
-#define KW_I2C_MODE_DUMB	0x00
-#define KW_I2C_MODE_STANDARD	0x04
-#define KW_I2C_MODE_STANDARDSUB	0x08
-#define KW_I2C_MODE_COMBINED	0x0C
-#define KW_I2C_MODE_MODE_MASK	0x0C
-#define KW_I2C_MODE_CHAN_MASK	0xF0
-
-/* Control register */
-#define KW_I2C_CTL_AAK		0x01
-#define KW_I2C_CTL_XADDR	0x02
-#define KW_I2C_CTL_STOP		0x04
-#define KW_I2C_CTL_START	0x08
-
-/* Status register */
-#define KW_I2C_STAT_BUSY	0x01
-#define KW_I2C_STAT_LAST_AAK	0x02
-#define KW_I2C_STAT_LAST_RW	0x04
-#define KW_I2C_STAT_SDA		0x08
-#define KW_I2C_STAT_SCL		0x10
-
-/* IER & ISR registers */
-#define KW_I2C_IRQ_DATA		0x01
-#define KW_I2C_IRQ_ADDR		0x02
-#define KW_I2C_IRQ_STOP		0x04
-#define KW_I2C_IRQ_START	0x08
-#define KW_I2C_IRQ_MASK		0x0F
-
-/* Physical interface */
-struct keywest_iface
-{
-	struct device_node	*node;
-	void __iomem *		base;
-	unsigned		bsteps;
-	int			irq;
-	spinlock_t		lock;
-	struct keywest_chan	*channels;
-	unsigned		chan_count;
-	u8			cur_mode;
-	char			read_write;
-	u8			*data;
-	unsigned		datalen;
-	int			state;
-	int			result;
-	struct timer_list	timeout_timer;
-	struct completion	complete;
-};
-
-enum {
-	state_idle,
-	state_addr,
-	state_read,
-	state_write,
-	state_stop,
-	state_dead
-};
-
-/* Channel on an interface */
-struct keywest_chan
-{
-	struct i2c_adapter	adapter;
-	struct keywest_iface*	iface;
-	unsigned		chan_no;
-};
-
-/* Register access */
-
-static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg)
-{
-	return in_8(iface->base
-		+ (((unsigned)reg) << iface->bsteps));
-}
-
-static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val)
-{
-	out_8(iface->base
-		+ (((unsigned)reg) << iface->bsteps), val);
-	(void)__read_reg(iface, reg_subaddr);
-}
-
-#define write_reg(reg, val)	__write_reg(iface, reg, val) 
-#define read_reg(reg)		__read_reg(iface, reg) 
-
-
-
-#endif /* __I2C_KEYWEST_H__ */
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
deleted file mode 100644
index bfefe7f7a53d..000000000000
--- a/drivers/i2c/busses/i2c-pmac-smu.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
-    i2c Support for Apple SMU Controller
-
-    Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
-                       <benh@kernel.crashing.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/smu.h>
-
-static int probe;
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's SMU");
-MODULE_LICENSE("GPL");
-module_param(probe, bool, 0);
-
-
-/* Physical interface */
-struct smu_iface
-{
-	struct i2c_adapter	adapter;
-	struct completion	complete;
-	u32			busid;
-};
-
-static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
-{
-	struct smu_iface	*iface = misc;
-	complete(&iface->complete);
-}
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32 smu_smbus_xfer(	struct i2c_adapter*	adap,
-				u16			addr,
-				unsigned short		flags,
-				char			read_write,
-				u8			command,
-				int			size,
-				union i2c_smbus_data*	data)
-{
-	struct smu_iface	*iface = i2c_get_adapdata(adap);
-	struct smu_i2c_cmd	cmd;
-	int			rc = 0;
-	int			read = (read_write == I2C_SMBUS_READ);
-
-	cmd.info.bus = iface->busid;
-	cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
-
-	/* Prepare datas & select mode */
-	switch (size) {
-        case I2C_SMBUS_QUICK:
-		cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
-		cmd.info.datalen = 0;
-	    	break;
-        case I2C_SMBUS_BYTE:
-		cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
-		cmd.info.datalen = 1;
-		if (!read)
-			cmd.info.data[0] = data->byte;
-	    	break;
-        case I2C_SMBUS_BYTE_DATA:
-		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
-		cmd.info.datalen = 1;
-		cmd.info.sublen = 1;
-		cmd.info.subaddr[0] = command;
-		cmd.info.subaddr[1] = 0;
-		cmd.info.subaddr[2] = 0;
-		if (!read)
-			cmd.info.data[0] = data->byte;
-	    	break;
-        case I2C_SMBUS_WORD_DATA:
-		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
-		cmd.info.datalen = 2;
-		cmd.info.sublen = 1;
-		cmd.info.subaddr[0] = command;
-		cmd.info.subaddr[1] = 0;
-		cmd.info.subaddr[2] = 0;
-		if (!read) {
-			cmd.info.data[0] = data->byte & 0xff;
-			cmd.info.data[1] = (data->byte >> 8) & 0xff;
-		}
-		break;
-	/* Note that these are broken vs. the expected smbus API where
-	 * on reads, the lenght is actually returned from the function,
-	 * but I think the current API makes no sense and I don't want
-	 * any driver that I haven't verified for correctness to go
-	 * anywhere near a pmac i2c bus anyway ...
-	 */
-        case I2C_SMBUS_BLOCK_DATA:
-		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
-		cmd.info.datalen = data->block[0] + 1;
-		if (cmd.info.datalen > 6)
-			return -EINVAL;
-		if (!read)
-			memcpy(cmd.info.data, data->block, cmd.info.datalen);
-		cmd.info.sublen = 1;
-		cmd.info.subaddr[0] = command;
-		cmd.info.subaddr[1] = 0;
-		cmd.info.subaddr[2] = 0;
-		break;
-	case I2C_SMBUS_I2C_BLOCK_DATA:
-		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
-		cmd.info.datalen = data->block[0];
-		if (cmd.info.datalen > 7)
-			return -EINVAL;
-		if (!read)
-			memcpy(cmd.info.data, &data->block[1],
-			       cmd.info.datalen);
-		cmd.info.sublen = 1;
-		cmd.info.subaddr[0] = command;
-		cmd.info.subaddr[1] = 0;
-		cmd.info.subaddr[2] = 0;
-		break;
-
-        default:
-	    	return -EINVAL;
-	}
-
-	/* Turn a standardsub read into a combined mode access */
- 	if (read_write == I2C_SMBUS_READ &&
-	    cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
-		cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
-
-	/* Finish filling command and submit it */
-	cmd.done = smu_i2c_done;
-	cmd.misc = iface;
-	rc = smu_queue_i2c(&cmd);
-	if (rc < 0)
-		return rc;
-	wait_for_completion(&iface->complete);
-	rc = cmd.status;
-
-	if (!read || rc < 0)
-		return rc;
-
-	switch (size) {
-        case I2C_SMBUS_BYTE:
-        case I2C_SMBUS_BYTE_DATA:
-		data->byte = cmd.info.data[0];
-	    	break;
-        case I2C_SMBUS_WORD_DATA:
-		data->word = ((u16)cmd.info.data[1]) << 8;
-		data->word |= cmd.info.data[0];
-		break;
-	/* Note that these are broken vs. the expected smbus API where
-	 * on reads, the lenght is actually returned from the function,
-	 * but I think the current API makes no sense and I don't want
-	 * any driver that I haven't verified for correctness to go
-	 * anywhere near a pmac i2c bus anyway ...
-	 */
-        case I2C_SMBUS_BLOCK_DATA:
-	case I2C_SMBUS_I2C_BLOCK_DATA:
-		memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
-		break;
-	}
-
-	return rc;
-}
-
-static u32
-smu_smbus_func(struct i2c_adapter * adapter)
-{
-	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm smu_algorithm = {
-	.smbus_xfer	= smu_smbus_xfer,
-	.functionality	= smu_smbus_func,
-};
-
-static int create_iface(struct device_node *np, struct device *dev)
-{
-	struct smu_iface* iface;
-	u32 *reg, busid;
-	int rc;
-
-	reg = (u32 *)get_property(np, "reg", NULL);
-	if (reg == NULL) {
-		printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
-		return -ENXIO;
-	}
-	busid = *reg;
-
-	iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
-	if (iface == NULL) {
-		printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
-		return -ENOMEM;
-	}
-	init_completion(&iface->complete);
-	iface->busid = busid;
-
-	dev_set_drvdata(dev, iface);
-
-	sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
-	iface->adapter.algo = &smu_algorithm;
-	iface->adapter.algo_data = NULL;
-	iface->adapter.client_register = NULL;
-	iface->adapter.client_unregister = NULL;
-	i2c_set_adapdata(&iface->adapter, iface);
-	iface->adapter.dev.parent = dev;
-
-	rc = i2c_add_adapter(&iface->adapter);
-	if (rc) {
-		printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
-		       "failed\n", iface->adapter.name);
-		i2c_set_adapdata(&iface->adapter, NULL);
-	}
-
-	if (probe) {
-		unsigned char addr;
-		printk("Probe: ");
-		for (addr = 0x00; addr <= 0x7f; addr++) {
-			if (i2c_smbus_xfer(&iface->adapter,addr,
-					   0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
-				printk("%02x ", addr);
-		}
-		printk("\n");
-	}
-
-	printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
-
-	return 0;
-}
-
-static int dispose_iface(struct device *dev)
-{
-	struct smu_iface *iface = dev_get_drvdata(dev);
-	int rc;
-
-	rc = i2c_del_adapter(&iface->adapter);
-	i2c_set_adapdata(&iface->adapter, NULL);
-	/* We aren't that prepared to deal with this... */
-	if (rc)
-		printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
-		       iface->adapter.name);
-	dev_set_drvdata(dev, NULL);
-	kfree(iface);
-
-	return 0;
-}
-
-
-static int create_iface_of_platform(struct of_device* dev,
-				    const struct of_device_id *match)
-{
-	return create_iface(dev->node, &dev->dev);
-}
-
-
-static int dispose_iface_of_platform(struct of_device* dev)
-{
-	return dispose_iface(&dev->dev);
-}
-
-
-static struct of_device_id i2c_smu_match[] =
-{
-	{
-		.compatible	= "smu-i2c",
-	},
-	{},
-};
-static struct of_platform_driver i2c_smu_of_platform_driver =
-{
-	.name 		= "i2c-smu",
-	.match_table	= i2c_smu_match,
-	.probe		= create_iface_of_platform,
-	.remove		= dispose_iface_of_platform
-};
-
-
-static int __init i2c_pmac_smu_init(void)
-{
-	of_register_driver(&i2c_smu_of_platform_driver);
-	return 0;
-}
-
-
-static void __exit i2c_pmac_smu_cleanup(void)
-{
-	of_unregister_driver(&i2c_smu_of_platform_driver);
-}
-
-module_init(i2c_pmac_smu_init);
-module_exit(i2c_pmac_smu_cleanup);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
new file mode 100644
index 000000000000..df786eb55295
--- /dev/null
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -0,0 +1,290 @@
+/*
+    i2c Support for Apple SMU Controller
+
+    Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+                       <benh@kernel.crashing.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple PowerMac");
+MODULE_LICENSE("GPL");
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
+					u16			addr,
+					unsigned short		flags,
+					char			read_write,
+					u8			command,
+					int			size,
+					union i2c_smbus_data*	data)
+{
+	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adap);
+	int			rc = 0;
+	int			read = (read_write == I2C_SMBUS_READ);
+	int			addrdir = (addr << 1) | read;
+	u8			local[2];
+
+	rc = pmac_i2c_open(bus, 0);
+	if (rc)
+		return rc;
+
+	switch (size) {
+        case I2C_SMBUS_QUICK:
+		rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0);
+	    	break;
+        case I2C_SMBUS_BYTE:
+		rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1);
+	    	break;
+        case I2C_SMBUS_BYTE_DATA:
+		rc = pmac_i2c_setmode(bus, read ?
+				      pmac_i2c_mode_combined :
+				      pmac_i2c_mode_stdsub);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1);
+	    	break;
+        case I2C_SMBUS_WORD_DATA:
+		rc = pmac_i2c_setmode(bus, read ?
+				      pmac_i2c_mode_combined :
+				      pmac_i2c_mode_stdsub);
+		if (rc)
+			goto bail;
+		if (!read) {
+			local[0] = data->word & 0xff;
+			local[1] = (data->word >> 8) & 0xff;
+		}
+		rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2);
+		if (rc == 0 && read) {
+			data->word = ((u16)local[1]) << 8;
+			data->word |= local[0];
+		}
+	    	break;
+
+	/* Note that these are broken vs. the expected smbus API where
+	 * on reads, the lenght is actually returned from the function,
+	 * but I think the current API makes no sense and I don't want
+	 * any driver that I haven't verified for correctness to go
+	 * anywhere near a pmac i2c bus anyway ...
+	 *
+	 * I'm also not completely sure what kind of phases to do between
+	 * the actual command and the data (what I am _supposed_ to do that
+	 * is). For now, I assume writes are a single stream and reads have
+	 * a repeat start/addr phase (but not stop in between)
+	 */
+        case I2C_SMBUS_BLOCK_DATA:
+		rc = pmac_i2c_setmode(bus, read ?
+				      pmac_i2c_mode_combined :
+				      pmac_i2c_mode_stdsub);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block,
+				   data->block[0] + 1);
+
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		rc = pmac_i2c_setmode(bus, read ?
+				      pmac_i2c_mode_combined :
+				      pmac_i2c_mode_stdsub);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 1, command,
+				   read ? data->block : &data->block[1],
+				   data->block[0]);
+		break;
+
+        default:
+	    	rc = -EINVAL;
+	}
+ bail:
+	pmac_i2c_close(bus);
+	return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint. This driver only support single
+ * messages (for "lame i2c" transfers). Anything else should use the smbus
+ * entry point
+ */
+static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
+					struct i2c_msg *msgs,
+					int num)
+{
+	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adap);
+	int			rc = 0;
+	int			read;
+	int			addrdir;
+
+	if (num != 1)
+		return -EINVAL;
+	if (msgs->flags & I2C_M_TEN)
+		return -EINVAL;
+	read = (msgs->flags & I2C_M_RD) != 0;
+	addrdir = (msgs->addr << 1) | read;
+	if (msgs->flags & I2C_M_REV_DIR_ADDR)
+		addrdir ^= 1;
+
+	rc = pmac_i2c_open(bus, 0);
+	if (rc)
+		return rc;
+	rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+	if (rc)
+		goto bail;
+	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+ bail:
+	pmac_i2c_close(bus);
+	return rc < 0 ? rc : msgs->len;
+}
+
+static u32 i2c_powermac_func(struct i2c_adapter * adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C;
+}
+
+/* For now, we only handle smbus */
+static struct i2c_algorithm i2c_powermac_algorithm = {
+	.smbus_xfer	= i2c_powermac_smbus_xfer,
+	.master_xfer	= i2c_powermac_master_xfer,
+	.functionality	= i2c_powermac_func,
+};
+
+
+static int i2c_powermac_remove(struct device *dev)
+{
+	struct i2c_adapter	*adapter = dev_get_drvdata(dev);
+	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adapter);
+	int			rc;
+
+	rc = i2c_del_adapter(adapter);
+	pmac_i2c_detach_adapter(bus, adapter);
+	i2c_set_adapdata(adapter, NULL);
+	/* We aren't that prepared to deal with this... */
+	if (rc)
+		printk("i2c-powermac.c: Failed to remove bus %s !\n",
+		       adapter->name);
+	dev_set_drvdata(dev, NULL);
+	kfree(adapter);
+
+	return 0;
+}
+
+
+static int i2c_powermac_probe(struct device *dev)
+{
+	struct pmac_i2c_bus *bus = dev->platform_data;
+	struct device_node *parent = NULL;
+	struct i2c_adapter *adapter;
+	char name[32], *basename;
+	int rc;
+
+	if (bus == NULL)
+		return -EINVAL;
+
+	/* Ok, now we need to make up a name for the interface that will
+	 * match what we used to do in the past, that is basically the
+	 * controller's parent device node for keywest. PMU didn't have a
+	 * naming convention and SMU has a different one
+	 */
+	switch(pmac_i2c_get_type(bus)) {
+	case pmac_i2c_bus_keywest:
+		parent = of_get_parent(pmac_i2c_get_controller(bus));
+		if (parent == NULL)
+			return -EINVAL;
+		basename = parent->name;
+		break;
+	case pmac_i2c_bus_pmu:
+		basename = "pmu";
+		break;
+	case pmac_i2c_bus_smu:
+		/* This is not what we used to do but I'm fixing drivers at
+		 * the same time as this change
+		 */
+		basename = "smu";
+		break;
+	default:
+		return -EINVAL;
+	}
+	snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus));
+	of_node_put(parent);
+
+	adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+	if (adapter == NULL) {
+		printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n");
+		return -ENOMEM;
+	}
+	dev_set_drvdata(dev, adapter);
+	strcpy(adapter->name, name);
+	adapter->algo = &i2c_powermac_algorithm;
+	i2c_set_adapdata(adapter, bus);
+	adapter->dev.parent = dev;
+	pmac_i2c_attach_adapter(bus, adapter);
+	rc = i2c_add_adapter(adapter);
+	if (rc) {
+		printk(KERN_ERR "i2c-powermac: Adapter %s registration "
+		       "failed\n", name);
+		i2c_set_adapdata(adapter, NULL);
+		pmac_i2c_detach_adapter(bus, adapter);
+	}
+
+	printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+	return rc;
+}
+
+
+static struct device_driver i2c_powermac_driver = {
+	.name = "i2c-powermac",
+	.bus = &platform_bus_type,
+	.probe = i2c_powermac_probe,
+	.remove = i2c_powermac_remove,
+};
+
+static int __init i2c_powermac_init(void)
+{
+	driver_register(&i2c_powermac_driver);
+	return 0;
+}
+
+
+static void __exit i2c_powermac_cleanup(void)
+{
+	driver_unregister(&i2c_powermac_driver);
+}
+
+module_init(i2c_powermac_init);
+module_exit(i2c_powermac_cleanup);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 70f7ab829d36..86e2234faf80 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -899,6 +899,12 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
 	struct pxa_i2c *i2c = adap->algo_data;
 	int ret, i;
 
+	/* If the I2C controller is disabled we need to reset it (probably due
+ 	   to a suspend/resume destroying state). We do this here as we can then
+ 	   avoid worrying about resuming the controller before its users. */
+	if (!(ICR & ICR_IUE))
+		i2c_pxa_reset(i2c);
+
 	for (i = adap->retries; i >= 0; i--) {
 		ret = i2c_pxa_do_xfer(i2c, msgs, num);
 		if (ret != I2C_RETRY)
@@ -939,7 +945,9 @@ static struct pxa_i2c i2c_pxa = {
 static int i2c_pxa_probe(struct platform_device *dev)
 {
 	struct pxa_i2c *i2c = &i2c_pxa;
+#ifdef CONFIG_I2C_PXA_SLAVE
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+#endif
 	int ret;
 
 #ifdef CONFIG_PXA27x
@@ -1024,5 +1032,7 @@ static void i2c_adap_pxa_exit(void)
 	return platform_driver_unregister(&i2c_pxa_driver);
 }
 
+MODULE_LICENSE("GPL");
+
 module_init(i2c_adap_pxa_init);
 module_exit(i2c_adap_pxa_exit);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 58cfd3111ef6..f7d40f8e5f5c 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -34,12 +34,12 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-iic.h>
 #include <asm/arch/iic.h>
@@ -738,7 +738,6 @@ static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c)
 {
 	if (i2c->clk != NULL && !IS_ERR(i2c->clk)) {
 		clk_disable(i2c->clk);
-		clk_unuse(i2c->clk);
 		clk_put(i2c->clk);
 		i2c->clk = NULL;
 	}
@@ -778,7 +777,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
 
-	clk_use(i2c->clk);
 	clk_enable(i2c->clk);
 
 	/* map the registers */
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index e70b3db69edd..1af3dfbb8086 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -494,6 +494,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 {
 	struct tps65010		*tps;
 	int			status;
+	unsigned long		irqflags;
 
 	if (the_tps) {
 		dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME);
@@ -520,13 +521,14 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 	}
 
 #ifdef	CONFIG_ARM
+	irqflags = SA_SAMPLE_RANDOM | SA_TRIGGER_LOW;
 	if (machine_is_omap_h2()) {
 		tps->model = TPS65010;
 		omap_cfg_reg(W4_GPIO58);
 		tps->irq = OMAP_GPIO_IRQ(58);
 		omap_request_gpio(58);
 		omap_set_gpio_direction(58, 1);
-		set_irq_type(tps->irq, IRQT_FALLING);
+		irqflags |= SA_TRIGGER_FALLING;
 	}
 	if (machine_is_omap_osk()) {
 		tps->model = TPS65010;
@@ -534,7 +536,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 		tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
 		omap_request_gpio(OMAP_MPUIO(1));
 		omap_set_gpio_direction(OMAP_MPUIO(1), 1);
-		set_irq_type(tps->irq, IRQT_FALLING);
+		irqflags |= SA_TRIGGER_FALLING;
 	}
 	if (machine_is_omap_h3()) {
 		tps->model = TPS65013;
@@ -542,13 +544,12 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 		// FIXME set up this board's IRQ ...
 	}
 #else
-#define set_irq_type(num,trigger)	do{}while(0)
+	irqflags = SA_SAMPLE_RANDOM;
 #endif
 
 	if (tps->irq > 0) {
-		set_irq_type(tps->irq, IRQT_LOW);
 		status = request_irq(tps->irq, tps65010_irq,
-			SA_SAMPLE_RANDOM, DRIVER_NAME, tps);
+			irqflags, DRIVER_NAME, tps);
 		if (status < 0) {
 			dev_dbg(&tps->client.dev, "can't get IRQ %d, err %d\n",
 					tps->irq, status);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 52b77477df57..0ce58b506046 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -63,13 +63,6 @@ static int i2c_bus_resume(struct device * dev)
 	return rc;
 }
 
-struct bus_type i2c_bus_type = {
-	.name =		"i2c",
-	.match =	i2c_device_match,
-	.suspend =      i2c_bus_suspend,
-	.resume =       i2c_bus_resume,
-};
-
 static int i2c_device_probe(struct device *dev)
 {
 	return -ENODEV;
@@ -80,6 +73,15 @@ static int i2c_device_remove(struct device *dev)
 	return 0;
 }
 
+struct bus_type i2c_bus_type = {
+	.name =		"i2c",
+	.match =	i2c_device_match,
+	.probe =	i2c_device_probe,
+	.remove =	i2c_device_remove,
+	.suspend =      i2c_bus_suspend,
+	.resume =       i2c_bus_resume,
+};
+
 void i2c_adapter_dev_release(struct device *dev)
 {
 	struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
@@ -90,8 +92,6 @@ struct device_driver i2c_adapter_driver = {
 	.owner = THIS_MODULE,
 	.name =	"i2c_adapter",
 	.bus = &i2c_bus_type,
-	.probe = i2c_device_probe,
-	.remove = i2c_device_remove,
 };
 
 static void i2c_adapter_class_dev_release(struct class_device *dev)
@@ -294,8 +294,6 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
 	/* add the driver to the list of i2c drivers in the driver core */
 	driver->driver.owner = owner;
 	driver->driver.bus = &i2c_bus_type;
-	driver->driver.probe = i2c_device_probe;
-	driver->driver.remove = i2c_device_remove;
 
 	res = driver_register(&driver->driver);
 	if (res)