Merge tag 'qcom-drivers-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.9

For RPMh this fixes an issue where ktime was used during suspend, allows
the driver to be used on ARM targets and some minor cleanups.

It adds support for the latest format version in the socinfo driver and
adds identifiers for SM8250 and SDM630.

SMD-RPM gains compatibles for MSM8994 and MSM8936 and the Qualcomm SCM
gains compatibles MSM8994 and IPQ8074.

The GENI core code gains interconnect path voting and performance level
support, with subsequent patches integrating this with the SPI, I2C,
UART and QSPI drivers.

Following this the KGDB support for the GENI serial driver is improved,
the performance related to chip-select is improved for SPI and QSPI.

* tag 'qcom-drivers-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
  soc: qcom: geni: Fix NULL pointer dereference
  tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for console
  serial: qcom_geni_serial: Always use 4 bytes per TX FIFO word
  serial: qcom_geni_serial: Make kgdb work even if UART isn't console
  spi: spi-geni-qcom: Get rid of most overhead in prepare_message()
  spi: spi-geni-qcom: Set the clock properly at runtime resume
  spi: spi-geni-qcom: Avoid clock setting if not needed
  spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms
  spi: spi-qcom-qspi: Avoid clock setting if not needed
  spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  firmware: qcom_scm: Add msm8994 compatible
  firmware: qcom_scm: Fix legacy convention SCM accessors
  <linux/of.h>: add stub for of_get_next_parent() to fix qcom build error
  dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
  spi: spi-geni-qcom: Use OPP API to set clk/perf state
  tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  spi: spi-qcom-qspi: Add interconnect support
  spi: spi-geni-qcom: Add interconnect support
  spi: spi-geni-qcom: Combine the clock setting code
  tty: serial: qcom_geni_serial: Add interconnect support
  ...

Link: https://lore.kernel.org/r/20200721044812.3429652-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 25 insertions, 1 deletions

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 18d1e4fd4cf3..32b2a9921b14 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -557,6 +557,22 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	gi2c->adap.dev.of_node = dev->of_node;
 	strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
 
+	ret = geni_icc_get(&gi2c->se, "qup-memory");
+	if (ret)
+		return ret;
+	/*
+	 * Set the bus quota for core and cpu to a reasonable value for
+	 * register access.
+	 * Set quota for DDR based on bus speed.
+	 */
+	gi2c->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW;
+	gi2c->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
+	gi2c->se.icc_paths[GENI_TO_DDR].avg_bw = Bps_to_icc(gi2c->clk_freq_out);
+
+	ret = geni_icc_set_bw(&gi2c->se);
+	if (ret)
+		return ret;
+
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
 		dev_err(dev, "Error turning on resources %d\n", ret);
@@ -579,6 +595,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = geni_icc_disable(&gi2c->se);
+	if (ret)
+		return ret;
+
 	dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 
 	gi2c->suspended = 1;
@@ -623,7 +643,7 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
 		gi2c->suspended = 1;
 	}
 
-	return 0;
+	return geni_icc_disable(&gi2c->se);
 }
 
 static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
@@ -631,6 +651,10 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
 	int ret;
 	struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
 
+	ret = geni_icc_enable(&gi2c->se);
+	if (ret)
+		return ret;
+
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret)
 		return ret;