diff options
| author | Vadim Pasternak <vadimp@mellanox.com> | 2016-11-11 00:26:23 +0300 |
|---|---|---|
| committer | Wolfram Sang <wsa@the-dreams.de> | 2016-11-18 01:19:00 +0300 |
| commit | c02b7bf532f7e46f1f9a0e9c3c27ca3f6f134e8d (patch) | |
| tree | 816c6a097f3d839d3b6656a9963b5df59bfb7cf8 /drivers/i2c/muxes/Makefile | |
| parent | 1e98dcd779705dbf9f9b2a5177674361649931e3 (diff) | |
| download | linux-c02b7bf532f7e46f1f9a0e9c3c27ca3f6f134e8d.tar.xz | |
i2c: mux: mellanox: add driver
This driver allows I2C routing controlled through CPLD select registers on
a wide range of Mellanox systems (CPLD Lattice device).
MUX selection is provided by digital and analog HW. Analog part is not
under SW control.
Digital part is under CPLD control (channel selection/de-selection).
Connectivity schema.
.---. .-------------.
| l | | |-- i2cx1 -- i2cx8
| i |-- i2cn --+--| mlxcpld mux |
| n | | | |-- i2cy1 -- i2cy8
| u | | '-------------'
| x | | |
'---' '---------'
i2c-mux-mlxpcld does not necessarily require i2c-mlxcpld. It can be used
along with another bus driver, and still control i2c routing through CPLD
mux selection, in case the system is equipped with CPLD capable of mux
selection control.
The Kconfig currently controlling compilation of this code is:
drivers/i2c/muxes/Kconfig:config I2C_MUX_MLXCPLD
Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c/muxes/Makefile')
| -rw-r--r-- | drivers/i2c/muxes/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile index 7c267c29b191..9948fa45037f 100644 --- a/drivers/i2c/muxes/Makefile +++ b/drivers/i2c/muxes/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE) += i2c-arb-gpio-challenge.o obj-$(CONFIG_I2C_DEMUX_PINCTRL) += i2c-demux-pinctrl.o obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o +obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o |